brcm63xx: add linux 4.4 support

[openwrt.git] / target / linux / brcm63xx / patches-4.4 / 536-board_fast2704.patch

diff --git a/target/linux/brcm63xx/patches-4.4/536-board_fast2704.patch b/target/linux/brcm63xx/patches-4.4/536-board_fast2704.patch
new file mode 100644 (file)
index 0000000..323c0ff
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.4/536-board_fast2704.patch
@@ -0,0 +1,75 @@
+From: Marcin Jurkowski <marcin1j@gmail.com>
+Date: Thu, 31 Oct 2013 22:33:10 +0000
+Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
+ router
+
+This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
+router.
+It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
+modem equipped with 64 MiB RAM and 8 MiB flash.
+
+Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -391,6 +391,44 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_FAST2704V2 = {
++      .name                           = "F@ST2704V2",
++      .expected_cpu_id                = 0x6328,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .has_usbd                       = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ 
+ /*
+@@ -1803,6 +1841,7 @@ static const struct board_info __initcon
+       &board_963281TAN,
+       &board_A4001N1,
+       &board_dsl_274xb_f1,
++      &board_FAST2704V2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+@@ -1878,6 +1917,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+       { .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
++      { .compatible = "sagem,f@st2704v2", .data = &board_FAST2704V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },