bcm63xx: add support for linux 3.8

[openwrt.git] / target / linux / brcm63xx / patches-3.8 / 512-board_BTV2110.patch

diff --git a/target/linux/brcm63xx/patches-3.8/512-board_BTV2110.patch b/target/linux/brcm63xx/patches-3.8/512-board_BTV2110.patch
new file mode 100644 (file)
index 0000000..53f0377
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/512-board_BTV2110.patch
@@ -0,0 +1,75 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -450,6 +450,64 @@ static struct board_info __initdata boar
+       },
+ };
+ 
++
++/* BT Voyager 2110 */
++static struct board_info __initdata board_V2110 = {
++      .name                           = "V2110",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "V2110:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "V2110:red:power",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "V2110:green:adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {       .name           = "V2110:green:ppp",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "V2110:green:wireless",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -2010,6 +2068,7 @@ static const struct board_info __initcon
+       &board_spw500v,
+       &board_96348sv,
+       &board_V2500V_BB,
++      &board_V2110,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358