$(shell expr substr "$(1)" 1 16)
endef
+TARGET_DTBS:=
+
define Image/Build/CFE
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
rm -f $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp
endef
+define Image/Build/ZyXEL
+ # Generate the tagged image
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+ --output $(BIN_DIR)/openwrt-$(5)-$(1).tmp \
+ --boardid $(2) --chipid $(4) --entry $(KERNEL_ENTRY) \
+ --load-addr $(LOADADDR) --rsa-signature "$(6)" \
+ --info1 "+$(call Image/LimitName16,$(3))" --info2 $(1) \
+ $(7) $(8) $(9) $(10)
+ # Fix up header
+ $(STAGING_DIR_HOST)/bin/zyxbcm -i $(BIN_DIR)/openwrt-$(5)-$(1).tmp \
+ -o $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin
+ rm -f $(BIN_DIR)/openwrt-$(5)-$(1).tmp
+endef
+
define Image/Build/CFEOLD
$(TOPDIR)/scripts/brcmImage.pl -t -p \
-b $(2) -c $(3) \
$(MAKE) -C lzma-loader clean
endef
-define Image/Prepare
+define Image/PrepareLoader
# Standard LZMA kernel
- cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+ $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux$(1) $(KDIR)/vmlinux$(1).lzma
+
+ # Build the LZMA loader
+ rm -rf $(KDIR)/lzma-loader
+ $(MAKE) -C lzma-loader \
+ $(LOADER_MAKEOPTS) \
+ BUILD_DIR="$(KDIR)" \
+ TARGET_DIR="$(BIN_DIR)" \
+ LOADER_DATA="$(KDIR)/vmlinux$(1).lzma" \
+ LOADER=$(IMG_PREFIX)-loader$(1).elf \
+ LZMA_TEXT_START=0x80a00000 \
+ compile loader.elf
+
+ rm -f $(KDIR)/vmlinux$(1).lzma
+endef
+define Image/PrepareLoaderDTB
+ # append dtb to vmlinux, then build a standard LZMA loader
+ cat $(KDIR)/vmlinux$(1) $(DTS_DIR)/$(2).dtb > $(KDIR)/vmlinux$(1)-$(2)
+ $(call Image/PrepareLoader,$(1)-$(2))
+endef
+
+define Image/PrepareCFELzmaKernel
# CFE is a LZMA nazi! It took me hours to find out the parameters!
# Also I think lzma has a bug cause it generates different output depending on
# if you use stdin / stdout or not. Use files instead of stdio here, cause
# otherwise CFE will complain and not boot the image.
- $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
+ $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux$(1) $(KDIR)/vmlinux$(1).lzma.tmp
# Strip out the length, CFE doesn't like this
- dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
- dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
- rm -f $(KDIR)/vmlinux.lzma.tmp
+ dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe bs=5 count=1
+ dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
+ rm -f $(KDIR)/vmlinux$(1).lzma.tmp
+endef
- # Build the LZMA loader
- rm -f $(KDIR)/loader.gz
- $(MAKE) -C lzma-loader \
- BUILD_DIR="$(KDIR)" \
- TARGET="$(KDIR)" \
- clean install
+define Image/PrepareCFELzmaKernelDTB
+ # compile the dts (the dtb will be later reused for the lzma loader)
+ $(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(DTS_DIR)/$(1).dtb ../dts/$(1).dts
+ cat $(KDIR)/vmlinux $(DTS_DIR)/$(1).dtb > $(KDIR)/vmlinux-$(1)
+ $(call Image/PrepareCFELzmaKernel,-$(1))
+endef
- echo -ne "\\x00" >> $(KDIR)/loader.gz
+define Image/Prepare
+ $(call Image/PrepareCFELzmaKernel,)
+
+ $(foreach board,$(sort $(TARGET_DTBS)), $(call Image/PrepareCFELzmaKernelDTB,$(board)))
+
+ ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+ $(call Image/PrepareLoader,-initramfs)
+ $(foreach board,$(sort $(TARGET_DTBS)), $(call Image/PrepareLoaderDTB,-initramfs,$(board)))
+ endif
rm -f $(KDIR)/fs_mark
touch $(KDIR)/fs_mark
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
$(call Image/Build/CFE,$(1),96328avng,6328,96328avng-4M-flash-generic,,--pad 2)
$(call Image/Build/CFE,$(1),96328avng,6328,96328avng-8M-flash-generic,,--pad 4)
$(call Image/Build/CFE,$(1),96328avng,6328,96328avng-16M-flash-generic,,--pad 8)
- $(call Image/Build/CFE,$(1),96328A-1241N,6328,96328A-1241N-generic,,--pad 8)
$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-4M-flash-generic,,--pad 2)
$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-8M-flash-generic,,--pad 4)
$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-16M-flash-generic,,--pad 8)
$(call Image/Build/CFE,$(1),96368MVNgr,6368,96368MVNgr-generic)
$(call Image/Build/CFE,$(1),96368MVWG,6368,96368MVWG-generic)
+ # ADB P.DG A4001N
+ $(call Image/Build/CFE,$(1),96328dg2x2,6328,A4001N,,--pad 4)
# ADB P.DG A4001N1
$(call Image/Build/CFE,$(1),963281T_TEF,6328,A4001N1,,--pad 8)
# Asmax AR 1004g
$(call Image/Build/CFEFIXUP,$(1),96348GW,GW6200,6348,GW6200,$(shell printf '\x99'))
# Neufbox4
$(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
+ # Zyxel P870HW-51a v2
+ $(call Image/Build/ZyXEL,$(1),96368VVW,P870HW-51a_v2,6368,P870HW-51a_v2,ZyXEL,--signature "ZyXEL_0001")
# Neufbox6
$(call Image/Build/CFE,$(1),NB6-SER-r0,6362,NEUFBOX6,OpenWRT-$(REVISION))
$(call Image/Build/CFE,$(1),CT6373-1,6358,CT6373)
# Comtrend 536, 5621
$(call Image/Build/CFEFIXUP,$(1),96348GW-11,CT536_CT5621,6348,CT536_CT5621)
+ # Comtrend AR-5381u
+ $(call Image/Build/CFE,$(1),96328A-1241N,6328,AR-5381u,,--pad 8)
# Comtrend AR-5387un
$(call Image/Build/CFE,$(1),96328A-1441N1,6328,AR-5387un,,--pad 8)
+ # Comtrend VR-3025u
+ $(call Image/Build/CFE,$(1),96368M-1541N,6368,VR-3025u,,--pad 16)
+ # Comtrend VR-3025un
+ $(call Image/Build/CFE,$(1),96368M-1341N,6368,VR-3025un,,--pad 4)
# Comtrend WAP-5813n
$(call Image/Build/CFE,$(1),96369R-1231N,6368,WAP-5813n,,--pad 4)
# Davolink DV201AMR
# T-Com Speedport W 500V
$(call Image/Build/CFEFIXUP,$(1),96348GW,SPW500V,6348,SPW500V)
+ # Huawei HW520
+ $(call Image/Build/CFE,$(1),HW6358GW_B,6358,HW520,EchoLife_HG520v)
+
#HW553
$(call Image/Build/CFEHW553,$(1),HW553,6358,0x20000,HW553)
projects / openwrt.git / blobdiff