+++ /dev/null
-From d00af9c32e369be7d5f270cc18cbc10950213727 Mon Sep 17 00:00:00 2001
-From: Aron Szabo <aron@aron.ws>
-Date: Sat, 16 Jun 2012 12:15:55 +0200
-Subject: [PATCH 042/196] lirc: added support for RaspberryPi GPIO
-
----
- drivers/staging/media/lirc/Kconfig | 6 +
- drivers/staging/media/lirc/Makefile | 1 +
- drivers/staging/media/lirc/lirc_rpi.c | 687 ++++++++++++++++++++++++++++++++++
- 3 files changed, 694 insertions(+)
- create mode 100644 drivers/staging/media/lirc/lirc_rpi.c
-
-diff --git a/drivers/staging/media/lirc/Kconfig b/drivers/staging/media/lirc/Kconfig
-index e60a59f..6b7ff70 100644
---- a/drivers/staging/media/lirc/Kconfig
-+++ b/drivers/staging/media/lirc/Kconfig
-@@ -38,6 +38,12 @@ config LIRC_PARALLEL
- help
- Driver for Homebrew Parallel Port Receivers
-
-+config LIRC_RPI
-+ tristate "Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi"
-+ depends on LIRC
-+ help
-+ Driver for Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi
-+
- config LIRC_SASEM
- tristate "Sasem USB IR Remote"
- depends on LIRC && USB
-diff --git a/drivers/staging/media/lirc/Makefile b/drivers/staging/media/lirc/Makefile
-index b90fcab..2b227fd 100644
---- a/drivers/staging/media/lirc/Makefile
-+++ b/drivers/staging/media/lirc/Makefile
-@@ -7,6 +7,7 @@ obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o
- obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o
- obj-$(CONFIG_LIRC_IMON) += lirc_imon.o
- obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o
-+obj-$(CONFIG_LIRC_RPI) += lirc_rpi.o
- obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o
- obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o
- obj-$(CONFIG_LIRC_SIR) += lirc_sir.o
-diff --git a/drivers/staging/media/lirc/lirc_rpi.c b/drivers/staging/media/lirc/lirc_rpi.c
-new file mode 100644
-index 0000000..96acab0
---- /dev/null
-+++ b/drivers/staging/media/lirc/lirc_rpi.c
-@@ -0,0 +1,687 @@
-+/*
-+ * lirc_rpi.c
-+ *
-+ * lirc_rpi - Device driver that records pulse- and pause-lengths
-+ * (space-lengths) (just like the lirc_serial driver does)
-+ * between GPIO interrupt events on the Raspberry Pi.
-+ * Lots of code has been taken from the lirc_serial module,
-+ * so I would like say thanks to the authors.
-+ *
-+ * Copyright (C) 2012 Aron Robert Szabo <aron@reon.hu>,
-+ * Michael Bishop <cleverca22@gmail.com>
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/time.h>
-+#include <linux/string.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+#include <linux/spinlock.h>
-+#include <media/lirc.h>
-+#include <media/lirc_dev.h>
-+#include <linux/gpio.h>
-+
-+#define LIRC_DRIVER_NAME "lirc_rpi"
-+#define RBUF_LEN 256
-+#define LIRC_TRANSMITTER_LATENCY 256
-+
-+#ifndef MAX_UDELAY_MS
-+#define MAX_UDELAY_US 5000
-+#else
-+#define MAX_UDELAY_US (MAX_UDELAY_MS*1000)
-+#endif
-+
-+#define dprintk(fmt, args...) \
-+ do { \
-+ if (debug) \
-+ printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \
-+ fmt, ## args); \
-+ } while (0)
-+
-+/* module parameters */
-+
-+/* set the default GPIO input pin */
-+static int gpio_in_pin = 18;
-+/* set the default GPIO output pin */
-+static int gpio_out_pin = 17;
-+/* enable debugging messages */
-+static int debug;
-+/* -1 = auto, 0 = active high, 1 = active low */
-+static int sense = -1;
-+/* use softcarrier by default */
-+static int softcarrier = 1;
-+
-+struct gpio_chip *gpiochip;
-+struct irq_chip *irqchip;
-+struct irq_data *irqdata;
-+
-+/* forward declarations */
-+static long send_pulse(unsigned long length);
-+static void send_space(long length);
-+static void lirc_rpi_exit(void);
-+
-+int valid_gpio_pins[] = { 0, 1, 4, 8, 7, 9, 10, 11, 14, 15, 17, 18, 21, 22, 23,
-+ 24, 25 };
-+
-+static struct platform_device *lirc_rpi_dev;
-+static struct timeval lasttv = { 0, 0 };
-+static struct lirc_buffer rbuf;
-+static spinlock_t lock;
-+
-+/* initialized/set in init_timing_params() */
-+static unsigned int freq = 38000;
-+static unsigned int duty_cycle = 50;
-+static unsigned long period;
-+static unsigned long pulse_width;
-+static unsigned long space_width;
-+
-+static void safe_udelay(unsigned long usecs)
-+{
-+ while (usecs > MAX_UDELAY_US) {
-+ udelay(MAX_UDELAY_US);
-+ usecs -= MAX_UDELAY_US;
-+ }
-+ udelay(usecs);
-+}
-+
-+static int init_timing_params(unsigned int new_duty_cycle,
-+ unsigned int new_freq)
-+{
-+ /*
-+ * period, pulse/space width are kept with 8 binary places -
-+ * IE multiplied by 256.
-+ */
-+ if (256 * 1000000L / new_freq * new_duty_cycle / 100 <=
-+ LIRC_TRANSMITTER_LATENCY)
-+ return -EINVAL;
-+ if (256 * 1000000L / new_freq * (100 - new_duty_cycle) / 100 <=
-+ LIRC_TRANSMITTER_LATENCY)
-+ return -EINVAL;
-+ duty_cycle = new_duty_cycle;
-+ freq = new_freq;
-+ period = 256 * 1000000L / freq;
-+ pulse_width = period * duty_cycle / 100;
-+ space_width = period - pulse_width;
-+ dprintk("in init_timing_params, freq=%d pulse=%ld, "
-+ "space=%ld\n", freq, pulse_width, space_width);
-+ return 0;
-+}
-+
-+static long send_pulse_softcarrier(unsigned long length)
-+{
-+ int flag;
-+ unsigned long actual, target, d;
-+
-+ length <<= 8;
-+
-+ actual = 0; target = 0; flag = 0;
-+ while (actual < length) {
-+ if (flag) {
-+ gpiochip->set(gpiochip, gpio_out_pin, 0);
-+ target += space_width;
-+ } else {
-+ gpiochip->set(gpiochip, gpio_out_pin, 1);
-+ target += pulse_width;
-+ }
-+ d = (target - actual -
-+ LIRC_TRANSMITTER_LATENCY + 128) >> 8;
-+ /*
-+ * Note - we've checked in ioctl that the pulse/space
-+ * widths are big enough so that d is > 0
-+ */
-+ udelay(d);
-+ actual += (d << 8) + LIRC_TRANSMITTER_LATENCY;
-+ flag = !flag;
-+ }
-+ return (actual-length) >> 8;
-+}
-+
-+static long send_pulse(unsigned long length)
-+{
-+ if (length <= 0)
-+ return 0;
-+
-+ if (softcarrier) {
-+ return send_pulse_softcarrier(length);
-+ } else {
-+ gpiochip->set(gpiochip, gpio_out_pin, 1);
-+ safe_udelay(length);
-+ return 0;
-+ }
-+}
-+
-+static void send_space(long length)
-+{
-+ gpiochip->set(gpiochip, gpio_out_pin, 0);
-+ if (length <= 0)
-+ return;
-+ safe_udelay(length);
-+}
-+
-+static void rbwrite(int l)
-+{
-+ if (lirc_buffer_full(&rbuf)) {
-+ /* no new signals will be accepted */
-+ dprintk("Buffer overrun\n");
-+ return;
-+ }
-+ lirc_buffer_write(&rbuf, (void *)&l);
-+}
-+
-+static void frbwrite(int l)
-+{
-+ /* simple noise filter */
-+ static int pulse, space;
-+ static unsigned int ptr;
-+
-+ if (ptr > 0 && (l & PULSE_BIT)) {
-+ pulse += l & PULSE_MASK;
-+ if (pulse > 250) {
-+ rbwrite(space);
-+ rbwrite(pulse | PULSE_BIT);
-+ ptr = 0;
-+ pulse = 0;
-+ }
-+ return;
-+ }
-+ if (!(l & PULSE_BIT)) {
-+ if (ptr == 0) {
-+ if (l > 20000) {
-+ space = l;
-+ ptr++;
-+ return;
-+ }
-+ } else {
-+ if (l > 20000) {
-+ space += pulse;
-+ if (space > PULSE_MASK)
-+ space = PULSE_MASK;
-+ space += l;
-+ if (space > PULSE_MASK)
-+ space = PULSE_MASK;
-+ pulse = 0;
-+ return;
-+ }
-+ rbwrite(space);
-+ rbwrite(pulse | PULSE_BIT);
-+ ptr = 0;
-+ pulse = 0;
-+ }
-+ }
-+ rbwrite(l);
-+}
-+
-+static irqreturn_t irq_handler(int i, void *blah, struct pt_regs *regs)
-+{
-+ struct timeval tv;
-+ long deltv;
-+ int data;
-+ int signal;
-+
-+ /* use the GPIO signal level */
-+ signal = gpiochip->get(gpiochip, gpio_in_pin);
-+
-+ /* unmask the irq */
-+ irqchip->irq_unmask(irqdata);
-+
-+ if (sense != -1) {
-+ /* get current time */
-+ do_gettimeofday(&tv);
-+
-+ /* calc time since last interrupt in microseconds */
-+ deltv = tv.tv_sec-lasttv.tv_sec;
-+ if (tv.tv_sec < lasttv.tv_sec ||
-+ (tv.tv_sec == lasttv.tv_sec &&
-+ tv.tv_usec < lasttv.tv_usec)) {
-+ printk(KERN_WARNING LIRC_DRIVER_NAME
-+ ": AIEEEE: your clock just jumped backwards\n");
-+ printk(KERN_WARNING LIRC_DRIVER_NAME
-+ ": %d %d %lx %lx %lx %lx\n", signal, sense,
-+ tv.tv_sec, lasttv.tv_sec,
-+ tv.tv_usec, lasttv.tv_usec);
-+ data = PULSE_MASK;
-+ } else if (deltv > 15) {
-+ data = PULSE_MASK; /* really long time */
-+ if (!(signal^sense)) {
-+ /* sanity check */
-+ printk(KERN_WARNING LIRC_DRIVER_NAME
-+ ": AIEEEE: %d %d %lx %lx %lx %lx\n",
-+ signal, sense, tv.tv_sec, lasttv.tv_sec,
-+ tv.tv_usec, lasttv.tv_usec);
-+ /*
-+ * detecting pulse while this
-+ * MUST be a space!
-+ */
-+ sense = sense ? 0 : 1;
-+ }
-+ } else {
-+ data = (int) (deltv*1000000 +
-+ (tv.tv_usec - lasttv.tv_usec));
-+ }
-+ frbwrite(signal^sense ? data : (data|PULSE_BIT));
-+ lasttv = tv;
-+ wake_up_interruptible(&rbuf.wait_poll);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int is_right_chip(struct gpio_chip *chip, void *data)
-+{
-+ dprintk("is_right_chip %s %d\n", chip->label, strcmp(data, chip->label));
-+
-+ if (strcmp(data, chip->label) == 0)
-+ return 1;
-+ return 0;
-+}
-+
-+static int init_port(void)
-+{
-+ int i, nlow, nhigh, ret, irq;
-+
-+ gpiochip = gpiochip_find("bcm2708_gpio", is_right_chip);
-+
-+ if (!gpiochip)
-+ return -ENODEV;
-+
-+ if (gpio_request(gpio_out_pin, LIRC_DRIVER_NAME " ir/out")) {
-+ printk(KERN_ALERT LIRC_DRIVER_NAME
-+ ": cant claim gpio pin %d\n", gpio_out_pin);
-+ ret = -ENODEV;
-+ goto exit_init_port;
-+ }
-+
-+ if (gpio_request(gpio_in_pin, LIRC_DRIVER_NAME " ir/in")) {
-+ printk(KERN_ALERT LIRC_DRIVER_NAME
-+ ": cant claim gpio pin %d\n", gpio_in_pin);
-+ ret = -ENODEV;
-+ goto exit_gpio_free_out_pin;
-+ }
-+
-+ gpiochip->direction_input(gpiochip, gpio_in_pin);
-+ gpiochip->direction_output(gpiochip, gpio_out_pin, 1);
-+ gpiochip->set(gpiochip, gpio_out_pin, 0);
-+
-+ irq = gpiochip->to_irq(gpiochip, gpio_in_pin);
-+ dprintk("to_irq %d\n", irq);
-+ irqdata = irq_get_irq_data(irq);
-+
-+ if (irqdata && irqdata->chip) {
-+ irqchip = irqdata->chip;
-+ } else {
-+ ret = -ENODEV;
-+ goto exit_gpio_free_in_pin;
-+ }
-+
-+ /* if pin is high, then this must be an active low receiver. */
-+ if (sense == -1) {
-+ /* wait 1/2 sec for the power supply */
-+ msleep(500);
-+
-+ /*
-+ * probe 9 times every 0.04s, collect "votes" for
-+ * active high/low
-+ */
-+ nlow = 0;
-+ nhigh = 0;
-+ for (i = 0; i < 9; i++) {
-+ if (gpiochip->get(gpiochip, gpio_in_pin))
-+ nlow++;
-+ else
-+ nhigh++;
-+ msleep(40);
-+ }
-+ sense = (nlow >= nhigh ? 1 : 0);
-+ printk(KERN_INFO LIRC_DRIVER_NAME
-+ ": auto-detected active %s receiver on GPIO pin %d\n",
-+ sense ? "low" : "high", gpio_in_pin);
-+ } else {
-+ printk(KERN_INFO LIRC_DRIVER_NAME
-+ ": manually using active %s receiver on GPIO pin %d\n",
-+ sense ? "low" : "high", gpio_in_pin);
-+ }
-+
-+ return 0;
-+
-+ exit_gpio_free_in_pin:
-+ gpio_free(gpio_in_pin);
-+
-+ exit_gpio_free_out_pin:
-+ gpio_free(gpio_out_pin);
-+
-+ exit_init_port:
-+ return ret;
-+}
-+
-+// called when the character device is opened
-+static int set_use_inc(void *data)
-+{
-+ int result;
-+ unsigned long flags;
-+
-+ /* initialize timestamp */
-+ do_gettimeofday(&lasttv);
-+
-+ result = request_irq(gpiochip->to_irq(gpiochip, gpio_in_pin),
-+ (irq_handler_t) irq_handler, 0,
-+ LIRC_DRIVER_NAME, (void*) 0);
-+
-+ switch (result) {
-+ case -EBUSY:
-+ printk(KERN_ERR LIRC_DRIVER_NAME
-+ ": IRQ %d is busy\n",
-+ gpiochip->to_irq(gpiochip, gpio_in_pin));
-+ return -EBUSY;
-+ case -EINVAL:
-+ printk(KERN_ERR LIRC_DRIVER_NAME
-+ ": Bad irq number or handler\n");
-+ return -EINVAL;
-+ default:
-+ dprintk("Interrupt %d obtained\n",
-+ gpiochip->to_irq(gpiochip, gpio_in_pin));
-+ break;
-+ };
-+
-+ /* initialize pulse/space widths */
-+ init_timing_params(duty_cycle, freq);
-+
-+ spin_lock_irqsave(&lock, flags);
-+
-+ /* GPIO Pin Falling/Rising Edge Detect Enable */
-+ irqchip->irq_set_type(irqdata,
-+ IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING);
-+
-+ /* unmask the irq */
-+ irqchip->irq_unmask(irqdata);
-+
-+ spin_unlock_irqrestore(&lock, flags);
-+
-+ return 0;
-+}
-+
-+static void set_use_dec(void *data)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&lock, flags);
-+
-+ /* GPIO Pin Falling/Rising Edge Detect Disable */
-+ irqchip->irq_set_type(irqdata, 0);
-+ irqchip->irq_mask(irqdata);
-+
-+ spin_unlock_irqrestore(&lock, flags);
-+
-+ free_irq(gpiochip->to_irq(gpiochip, gpio_in_pin), (void *) 0);
-+
-+ dprintk(KERN_INFO LIRC_DRIVER_NAME
-+ ": freed IRQ %d\n", gpiochip->to_irq(gpiochip, gpio_in_pin));
-+}
-+
-+static ssize_t lirc_write(struct file *file, const char *buf,
-+ size_t n, loff_t *ppos)
-+{
-+ int i, count;
-+ unsigned long flags;
-+ long delta = 0;
-+ int *wbuf;
-+
-+ count = n / sizeof(int);
-+ if (n % sizeof(int) || count % 2 == 0)
-+ return -EINVAL;
-+ wbuf = memdup_user(buf, n);
-+ if (IS_ERR(wbuf))
-+ return PTR_ERR(wbuf);
-+ spin_lock_irqsave(&lock, flags);
-+
-+ for (i = 0; i < count; i++) {
-+ if (i%2)
-+ send_space(wbuf[i] - delta);
-+ else
-+ delta = send_pulse(wbuf[i]);
-+ }
-+ gpiochip->set(gpiochip, gpio_out_pin, 0);
-+
-+ spin_unlock_irqrestore(&lock, flags);
-+ kfree(wbuf);
-+ return n;
-+}
-+
-+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
-+{
-+ int result;
-+ __u32 value;
-+
-+ switch (cmd) {
-+ case LIRC_GET_SEND_MODE:
-+ return -ENOIOCTLCMD;
-+ break;
-+
-+ case LIRC_SET_SEND_MODE:
-+ result = get_user(value, (__u32 *) arg);
-+ if (result)
-+ return result;
-+ /* only LIRC_MODE_PULSE supported */
-+ if (value != LIRC_MODE_PULSE)
-+ return -ENOSYS;
-+ break;
-+
-+ case LIRC_GET_LENGTH:
-+ return -ENOSYS;
-+ break;
-+
-+ case LIRC_SET_SEND_DUTY_CYCLE:
-+ dprintk("SET_SEND_DUTY_CYCLE\n");
-+ result = get_user(value, (__u32 *) arg);
-+ if (result)
-+ return result;
-+ if (value <= 0 || value > 100)
-+ return -EINVAL;
-+ return init_timing_params(value, freq);
-+ break;
-+
-+ case LIRC_SET_SEND_CARRIER:
-+ dprintk("SET_SEND_CARRIER\n");
-+ result = get_user(value, (__u32 *) arg);
-+ if (result)
-+ return result;
-+ if (value > 500000 || value < 20000)
-+ return -EINVAL;
-+ return init_timing_params(duty_cycle, value);
-+ break;
-+
-+ default:
-+ return lirc_dev_fop_ioctl(filep, cmd, arg);
-+ }
-+ return 0;
-+}
-+
-+static const struct file_operations lirc_fops = {
-+ .owner = THIS_MODULE,
-+ .write = lirc_write,
-+ .unlocked_ioctl = lirc_ioctl,
-+ .read = lirc_dev_fop_read,
-+ .poll = lirc_dev_fop_poll,
-+ .open = lirc_dev_fop_open,
-+ .release = lirc_dev_fop_close,
-+ .llseek = no_llseek,
-+};
-+
-+static struct lirc_driver driver = {
-+ .name = LIRC_DRIVER_NAME,
-+ .minor = -1,
-+ .code_length = 1,
-+ .sample_rate = 0,
-+ .data = NULL,
-+ .add_to_buf = NULL,
-+ .rbuf = &rbuf,
-+ .set_use_inc = set_use_inc,
-+ .set_use_dec = set_use_dec,
-+ .fops = &lirc_fops,
-+ .dev = NULL,
-+ .owner = THIS_MODULE,
-+};
-+
-+static struct platform_driver lirc_rpi_driver = {
-+ .driver = {
-+ .name = LIRC_DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init lirc_rpi_init(void)
-+{
-+ int result;
-+
-+ /* Init read buffer. */
-+ result = lirc_buffer_init(&rbuf, sizeof(int), RBUF_LEN);
-+ if (result < 0)
-+ return -ENOMEM;
-+
-+ result = platform_driver_register(&lirc_rpi_driver);
-+ if (result) {
-+ printk(KERN_ERR LIRC_DRIVER_NAME
-+ ": lirc register returned %d\n", result);
-+ goto exit_buffer_free;
-+ }
-+
-+ lirc_rpi_dev = platform_device_alloc(LIRC_DRIVER_NAME, 0);
-+ if (!lirc_rpi_dev) {
-+ result = -ENOMEM;
-+ goto exit_driver_unregister;
-+ }
-+
-+ result = platform_device_add(lirc_rpi_dev);
-+ if (result)
-+ goto exit_device_put;
-+
-+ return 0;
-+
-+ exit_device_put:
-+ platform_device_put(lirc_rpi_dev);
-+
-+ exit_driver_unregister:
-+ platform_driver_unregister(&lirc_rpi_driver);
-+
-+ exit_buffer_free:
-+ lirc_buffer_free(&rbuf);
-+
-+ return result;
-+}
-+
-+static void lirc_rpi_exit(void)
-+{
-+ gpio_free(gpio_out_pin);
-+ gpio_free(gpio_in_pin);
-+ platform_device_unregister(lirc_rpi_dev);
-+ platform_driver_unregister(&lirc_rpi_driver);
-+ lirc_buffer_free(&rbuf);
-+}
-+
-+static int __init lirc_rpi_init_module(void)
-+{
-+ int result, i;
-+
-+ result = lirc_rpi_init();
-+ if (result)
-+ return result;
-+
-+ /* check if the module received valid gpio pin numbers */
-+ result = 0;
-+ if (gpio_in_pin != gpio_out_pin) {
-+ for(i = 0; (i < ARRAY_SIZE(valid_gpio_pins)) && (result != 2); i++) {
-+ if (gpio_in_pin == valid_gpio_pins[i] ||
-+ gpio_out_pin == valid_gpio_pins[i]) {
-+ result++;
-+ }
-+ }
-+ }
-+
-+ if (result != 2) {
-+ result = -EINVAL;
-+ printk(KERN_ERR LIRC_DRIVER_NAME
-+ ": invalid GPIO pin(s) specified!\n");
-+ goto exit_rpi;
-+ }
-+
-+ driver.features = LIRC_CAN_SET_SEND_DUTY_CYCLE |
-+ LIRC_CAN_SET_SEND_CARRIER |
-+ LIRC_CAN_SEND_PULSE |
-+ LIRC_CAN_REC_MODE2;
-+
-+ driver.dev = &lirc_rpi_dev->dev;
-+ driver.minor = lirc_register_driver(&driver);
-+
-+ if (driver.minor < 0) {
-+ printk(KERN_ERR LIRC_DRIVER_NAME
-+ ": device registration failed with %d\n", result);
-+ result = -EIO;
-+ goto exit_rpi;
-+ }
-+
-+ printk(KERN_INFO LIRC_DRIVER_NAME ": driver registered!\n");
-+
-+ result = init_port();
-+ if (result < 0)
-+ goto exit_rpi;
-+
-+ return 0;
-+
-+ exit_rpi:
-+ lirc_rpi_exit();
-+
-+ return result;
-+}
-+
-+static void __exit lirc_rpi_exit_module(void)
-+{
-+ lirc_rpi_exit();
-+
-+ lirc_unregister_driver(driver.minor);
-+ printk(KERN_INFO LIRC_DRIVER_NAME ": cleaned up module\n");
-+}
-+
-+module_init(lirc_rpi_init_module);
-+module_exit(lirc_rpi_exit_module);
-+
-+MODULE_DESCRIPTION("Infra-red receiver and blaster driver for Raspberry Pi GPIO.");
-+MODULE_AUTHOR("Aron Robert Szabo <aron@reon.hu>");
-+MODULE_AUTHOR("Michael Bishop <cleverca22@gmail.com>");
-+MODULE_LICENSE("GPL");
-+
-+module_param(gpio_out_pin, int, S_IRUGO);
-+MODULE_PARM_DESC(gpio_out_pin, "GPIO output/transmitter pin number of the BCM"
-+ " processor. Valid pin numbers are: 0, 1, 4, 8, 7, 9, 10, 11,"
-+ " 14, 15, 17, 18, 21, 22, 23, 24, 25, default 17");
-+
-+module_param(gpio_in_pin, int, S_IRUGO);
-+MODULE_PARM_DESC(gpio_in_pin, "GPIO input pin number of the BCM processor."
-+ " Valid pin numbers are: 0, 1, 4, 8, 7, 9, 10, 11, 14, 15,"
-+ " 17, 18, 21, 22, 23, 24, 25, default 18");
-+
-+module_param(sense, bool, S_IRUGO);
-+MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit"
-+ " (0 = active high, 1 = active low )");
-+
-+module_param(softcarrier, bool, S_IRUGO);
-+MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)");
-+
-+module_param(debug, bool, S_IRUGO | S_IWUSR);
-+MODULE_PARM_DESC(debug, "Enable debugging messages");
---
-1.9.1
-
projects / openwrt.git / blobdiff