brcm2708: remove linux 3.10 support

[openwrt.git] / target / linux / brcm2708 / patches-3.10 / 0036-set-i2c-speed-via-module-parameter-or-menuconfig.-Th.patch

diff --git a/target/linux/brcm2708/patches-3.10/0036-set-i2c-speed-via-module-parameter-or-menuconfig.-Th.patch b/target/linux/brcm2708/patches-3.10/0036-set-i2c-speed-via-module-parameter-or-menuconfig.-Th.patch
deleted file mode 100644 (file)
index 34d866f..0000000
--- a/target/linux/brcm2708/patches-3.10/0036-set-i2c-speed-via-module-parameter-or-menuconfig.-Th.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From ec78c7da4fe9f7289cdc3e948b70a43c900f2be4 Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Wed, 3 Oct 2012 20:08:19 +0100
-Subject: [PATCH 036/196] set i2c speed via module-parameter or menuconfig.
- Thanks FrankBoesing
-
----
- drivers/i2c/busses/Kconfig       | 11 +++++++++++
- drivers/i2c/busses/i2c-bcm2708.c | 12 ++++++++----
- 2 files changed, 19 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index 290aee4..abaff1a 100644
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -355,6 +355,17 @@ config I2C_BCM2708
-         support for the BCM2708. BSC is a Broadcom proprietary bus compatible
-         with I2C/TWI/SMBus.
- 
-+config I2C_BCM2708_BAUDRATE
-+    prompt "BCM2708 I2C baudrate"
-+      depends on I2C_BCM2708
-+    int
-+    default 100000
-+    help
-+      Set the I2C baudrate. This will alter the default value. A
-+      different baudrate can be set by using a module parameter as well. If
-+      no parameter is provided when loading, this is the value that will be
-+      used.
-+
- config I2C_BLACKFIN_TWI
-       tristate "Blackfin TWI I2C support"
-       depends on BLACKFIN
-diff --git a/drivers/i2c/busses/i2c-bcm2708.c b/drivers/i2c/busses/i2c-bcm2708.c
-index 7cae615..3391889 100644
---- a/drivers/i2c/busses/i2c-bcm2708.c
-+++ b/drivers/i2c/busses/i2c-bcm2708.c
-@@ -66,11 +66,15 @@
- #define BSC_S_DONE            0x00000002
- #define BSC_S_TA              0x00000001
- 
--#define I2C_CLOCK_HZ  100000 /* FIXME: get from DT */
- #define I2C_TIMEOUT_MS        150
- 
- #define DRV_NAME      "bcm2708_i2c"
- 
-+static unsigned int baudrate = CONFIG_I2C_BCM2708_BAUDRATE;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The I2C baudrate");
-+
-+
- struct bcm2708_i2c {
-       struct i2c_adapter adapter;
- 
-@@ -148,7 +152,7 @@ static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
-       u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1;
- 
-       bus_hz = clk_get_rate(bi->clk);
--      cdiv = bus_hz / I2C_CLOCK_HZ;
-+      cdiv = bus_hz / baudrate;
- 
-       if (bi->msg->flags & I2C_M_RD)
-               c |= BSC_C_INTR | BSC_C_READ;
-@@ -331,8 +335,8 @@ static int bcm2708_i2c_probe(struct platform_device *pdev)
-               goto out_free_irq;
-       }
- 
--      dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d)\n",
--              pdev->id, (unsigned long)regs->start, irq);
-+      dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %dk)\n",
-+              pdev->id, (unsigned long)regs->start, irq, baudrate/1000);
- 
-       return 0;
- 
--- 
-1.9.1
-