[at91] refresh kernel patches

[openwrt.git] / target / linux / at91 / patches-2.6.21 / 016-v1-15-detect.patch

diff --git a/target/linux/at91/patches-2.6.21/016-v1-15-detect.patch b/target/linux/at91/patches-2.6.21/016-v1-15-detect.patch
index 0778d6a..ccdb579 100644 (file)
--- a/target/linux/at91/patches-2.6.21/016-v1-15-detect.patch
+++ b/target/linux/at91/patches-2.6.21/016-v1-15-detect.patch
@@ -1,7 +1,8 @@
-diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.21.5/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.21.5.old/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-13 16:24:18.000000000 +0100
-+++ linux-2.6.21.5/arch/arm/mach-at91/at91rm9200_devices.c     2008-03-13 16:34:43.000000000 +0100
-@@ -840,9 +840,9 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91rm9200_devices.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+@@ -840,9 +840,9 @@ static inline void configure_usart3_pins
        at91_set_B_periph(AT91_PIN_PA6, 0);             /* RXD3 */
        at91_set_B_periph(AT91_PIN_PB0, 0);   /* RTS3 */
        at91_set_B_periph(AT91_PIN_PB1, 0);   /* CTS3 */
@@ -14,10 +15,11 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.2
        at91_set_deglitch(AT91_PIN_PA24, 1);
  }
  
-diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c
---- linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c        2008-03-13 16:24:18.000000000 +0100
-+++ linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c    2008-03-13 16:35:05.000000000 +0100
-@@ -126,6 +126,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -126,6 +126,7 @@ static struct spi_board_info vlink_spi_d
  
  static void __init vlink_board_init(void)
  {
@@ -25,7 +27,7 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arc
        /* Serial */
        at91_add_device_serial();
        /* Ethernet */
-@@ -147,6 +148,10 @@
+@@ -147,6 +148,10 @@ static void __init vlink_board_init(void
  //    at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
        at91_add_device_mmc(0, &vlink_mmc_data);
  #endif
@@ -36,8 +38,8 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arc
        /* LEDs */
  //    at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
  
-@@ -164,10 +169,16 @@
- /* SIM Cards */
+@@ -164,10 +169,16 @@ static void __init vlink_board_init(void
+       /* SIM Cards */
        if (at91_get_gpio_value(AT91_PIN_PB8)) {
                at91_set_gpio_output(AT91_PIN_PB11, 0);
 -              at91_set_gpio_output(AT91_PIN_PB9, 1);
@@ -53,9 +55,9 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arc
 +              else
 +                      at91_set_gpio_output(AT91_PIN_PC13, 0);
        }
-               
+ 
        at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
-@@ -182,7 +193,18 @@
+@@ -182,7 +193,18 @@ static void __init vlink_board_init(void
        at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
        at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
        at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
@@ -75,10 +77,11 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arc
  }
  
  MACHINE_START(VLINK, "FDL VersaLink")
-diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/char/vlink_giu.c
---- linux-2.6.21.5.old/drivers/char/vlink_giu.c        2008-03-13 16:24:18.000000000 +0100
-+++ linux-2.6.21.5/drivers/char/vlink_giu.c    2008-03-13 16:37:06.000000000 +0100
-@@ -41,8 +41,7 @@
+Index: linux-2.6.21.7/drivers/char/vlink_giu.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/char/vlink_giu.c
++++ linux-2.6.21.7/drivers/char/vlink_giu.c
+@@ -41,8 +41,7 @@ static int major;    /* default is dynamic 
  module_param(major, int, 0);
  MODULE_PARM_DESC(major, "Major device number");
  
@@ -88,7 +91,7 @@ diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/cha
  struct vio_dev {
        struct cdev cdev;
  };
-@@ -50,6 +49,53 @@
+@@ -50,6 +49,53 @@ struct vio_dev {
  struct vio_dev *vio_devices;
  static struct class *vio_class;
  
@@ -142,7 +145,7 @@ diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/cha
  static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
                           loff_t *ppos)
  {
-@@ -160,6 +206,8 @@
+@@ -160,6 +206,8 @@ static int vio_probe(struct platform_dev
  {
        int retval, i, j;
        dev_t vdev = 0;
@@ -151,7 +154,7 @@ diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/cha
  
        if (major) {
                vdev = MKDEV(major, 0);
-@@ -185,6 +233,7 @@
+@@ -185,6 +233,7 @@ static int vio_probe(struct platform_dev
                vio_remove(dev);
                return PTR_ERR(vio_class);
        }
@@ -159,7 +162,7 @@ diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/cha
  
        vio_devices = kmalloc(VIO_NR_DEVS * sizeof(struct vio_dev), GFP_KERNEL);
        if (!vio_devices) {
-@@ -198,8 +247,10 @@
+@@ -198,8 +247,10 @@ static int vio_probe(struct platform_dev
                        int iodev = at91_is_pin_gpio(PIN_BASE + i*32 + j);
                        if (iodev) {
                                vio_setup_cdev(&vio_devices[i*32 + j], i*32 + j);
@@ -172,7 +175,7 @@ diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/cha
                        }
                }
  
-@@ -212,6 +263,29 @@
+@@ -212,6 +263,29 @@ fail:
        return retval;
  }