ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards

[openwrt.git] / target / linux / ar71xx / files-3.2 / arch / mips / ath79 / mach-whr-hp-g300n.c

diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c
index 514a69a..3e3924b 100644 (file)
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c
+++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c
@@ -16,7 +16,9 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
 
+#include "common.h"
 #include "dev-ap9x-pci.h"
 #include "dev-eth.h"
 #include "dev-gpio-buttons.h"
@@ -24,14 +26,19 @@
 #include "dev-m25p80.h"
 #include "machtypes.h"
 
-#define        WHRHPG300N_GPIO_LED_SECURITY            0
-#define        WHRHPG300N_GPIO_LED_DIAG                1
-#define        WHRHPG300N_GPIO_LED_ROUTER              6
+#define WHRHPG300N_GPIO_LED_SECURITY           0
+#define WHRHPG300N_GPIO_LED_DIAG               1
+#define WHRHPG300N_GPIO_LED_ROUTER             6
 
-#define        WHRHPG300N_GPIO_BTN_ROUTER_ON           7
-#define        WHRHPG300N_GPIO_BTN_ROUTER_AUTO         8
-#define        WHRHPG300N_GPIO_BTN_RESET               11
-#define        WHRHPG300N_GPIO_BTN_AOSS                12
+#define WHRHPG300N_GPIO_BTN_ROUTER_ON          7
+#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO                8
+#define WHRHPG300N_GPIO_BTN_RESET              11
+#define WHRHPG300N_GPIO_BTN_AOSS               12
+#define WHRHPG300N_GPIO_LED_LAN1               13
+#define WHRHPG300N_GPIO_LED_LAN2               14
+#define WHRHPG300N_GPIO_LED_LAN3               15
+#define WHRHPG300N_GPIO_LED_LAN4               16
+#define WHRHPG300N_GPIO_LED_WAN                        17
 
 #define        WHRHPG300N_KEYS_POLL_INTERVAL   20      /* msecs */
 #define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL)
@@ -91,6 +98,26 @@ static struct gpio_led whrhpg300n_leds_gpio[] __initdata = {
                .name           = "buffalo:green:router",
                .gpio           = WHRHPG300N_GPIO_LED_ROUTER,
                .active_low     = 1,
+       }, {
+               .name           = "buffalo:green:wan",
+               .gpio           = WHRHPG300N_GPIO_LED_WAN,
+               .active_low     = 1,
+       }, {
+               .name           = "buffalo:green:lan1",
+               .gpio           = WHRHPG300N_GPIO_LED_LAN1,
+               .active_low     = 1,
+       }, {
+               .name           = "buffalo:green:lan2",
+               .gpio           = WHRHPG300N_GPIO_LED_LAN2,
+               .active_low     = 1,
+       }, {
+               .name           = "buffalo:green:lan3",
+               .gpio           = WHRHPG300N_GPIO_LED_LAN3,
+               .active_low     = 1,
+       }, {
+               .name           = "buffalo:green:lan4",
+               .gpio           = WHRHPG300N_GPIO_LED_LAN4,
+               .active_low     = 1,
        }
 };
 
@@ -133,6 +160,12 @@ static void __init whrhpg300n_setup(void)
 
        ath79_register_m25p80(&whrhpg300n_flash_data);
 
+       ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+                                   AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+                                   AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+                                   AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+                                   AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
        ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio),
                                 whrhpg300n_leds_gpio);