/*
* Buffalo WZR-HP-AG300H board support
*
- * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2011 Felix Fietkau <nbd@nbd.name>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
- .name = "kernel",
+ .name = "firmware",
.offset = 0x0060000,
- .size = 0x0100000,
- }, {
- .name = "rootfs",
- .offset = 0x0160000,
- .size = 0x1e90000,
+ .size = 0x1f90000,
}, {
.name = "user_property",
.offset = 0x1ff0000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f90000,
}
};
},
};
+static struct gpio_led wzrhpag300h_wmac0_leds_gpio[] = {
+ {
+ .name = "buffalo:amber:band2g",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:usb",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:band2g",
+ .gpio = 5,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led wzrhpag300h_wmac1_leds_gpio[] = {
+ {
+ .name = "buffalo:green:band5g",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:router",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:blue:movie_engine",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:amber:band5g",
+ .gpio = 5,
+ .active_low = 1,
+ },
+};
+
static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
{
.desc = "reset",
.active_low = 1,
}, {
.desc = "router_auto",
- .type = EV_KEY,
+ .type = EV_SW,
.code = BTN_6,
.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 6,
.active_low = 1,
}, {
.desc = "router_off",
- .type = EV_KEY,
+ .type = EV_SW,
.code = BTN_5,
.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 7,
.active_low = 1,
+ }, {
+ .desc = "movie_engine",
+ .type = EV_SW,
+ .code = BTN_7,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 8,
+ .active_low = 1,
}
};
ath79_register_eth(0);
ath79_register_eth(1);
+ gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
ath79_register_usb();
- gpio_request(2, "usb");
- gpio_direction_output(2, 1);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
wzrhpag300h_leds_gpio);
ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ ap9x_pci_setup_wmac_leds(0, wzrhpag300h_wmac0_leds_gpio,
+ ARRAY_SIZE(wzrhpag300h_wmac0_leds_gpio));
+ ap9x_pci_setup_wmac_leds(1, wzrhpag300h_wmac1_leds_gpio,
+ ARRAY_SIZE(wzrhpag300h_wmac1_leds_gpio));
}
MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
- "Buffalo WZR-HP-AG300H", wzrhpag300h_setup);
-
+ "Buffalo WZR-HP-AG300H/WZR-600DHP", wzrhpag300h_setup);