ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons

[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-mzk-w04nu.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c
index 6af5dd4..b0dc0d1 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c
@@ -105,43 +105,45 @@ static struct gpio_button mzk_w04nu_gpio_buttons[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
-               .code           = BTN_0,
-               .threshold      = 5,
+               .code           = KEY_RESTART,
+               .threshold      = 3,
                .gpio           = MZK_W04NU_GPIO_BTN_RESET,
                .active_low     = 1,
        }, {
                .desc           = "wps",
                .type           = EV_KEY,
-               .code           = BTN_1,
-               .threshold      = 5,
+               .code           = KEY_WPS_BUTTON,
+               .threshold      = 3,
                .gpio           = MZK_W04NU_GPIO_BTN_WPS,
                .active_low     = 1,
        }, {
                .desc           = "aprouter",
                .type           = EV_KEY,
                .code           = BTN_2,
-               .threshold      = 5,
+               .threshold      = 3,
                .gpio           = MZK_W04NU_GPIO_BTN_APROUTER,
                .active_low     = 0,
        }
 };
 
+#define MZK_W04NU_WAN_PHYMASK  BIT(4)
+#define MZK_W04NU_MDIO_MASK    (~MZK_W04NU_WAN_PHYMASK)
+
 static void __init mzk_w04nu_setup(void)
 {
        u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
 
        ar71xx_set_mac_base(eeprom);
 
-       ar71xx_add_device_mdio(0x0);
+       ar71xx_add_device_mdio(MZK_W04NU_MDIO_MASK);
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.phy_mask = 0xf;
        ar71xx_eth0_data.speed = SPEED_100;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
        ar71xx_eth0_data.has_ar8216 = 1;
 
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.phy_mask = 0x10;
+       ar71xx_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK;
 
        ar71xx_add_device_eth(0);
        ar71xx_add_device_eth(1);