ar71xx: fix whitespaces nits
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-dir-615-c1.c
index f5eb7b2..e98ccac 100644 (file)
@@ -47,24 +47,24 @@ static struct mtd_partition dir_615c1_partitions[] = {
                .offset         = 0,
                .size           = 0x020000,
                .mask_flags     = MTD_WRITEABLE,
-       } , {
+       }, {
                .name           = "config",
                .offset         = 0x020000,
                .size           = 0x010000,
-       } , {
+       }, {
                .name           = "kernel",
                .offset         = 0x030000,
                .size           = 0x0d0000,
-       } , {
+       }, {
                .name           = "rootfs",
                .offset         = 0x100000,
                .size           = 0x2f0000,
-       } , {
+       }, {
                .name           = "art",
                .offset         = 0x3f0000,
                .size           = 0x010000,
                .mask_flags     = MTD_WRITEABLE,
-       } , {
+       }, {
                .name           = "firmware",
                .offset         = 0x030000,
                .size           = 0x3c0000,
@@ -74,8 +74,8 @@ static struct mtd_partition dir_615c1_partitions[] = {
 
 static struct flash_platform_data dir_615c1_flash_data = {
 #ifdef CONFIG_MTD_PARTITIONS
-        .parts          = dir_615c1_partitions,
-        .nr_parts       = ARRAY_SIZE(dir_615c1_partitions),
+       .parts          = dir_615c1_partitions,
+       .nr_parts       = ARRAY_SIZE(dir_615c1_partitions),
 #endif
 };
 
@@ -96,13 +96,13 @@ static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
                .name           = "dir-615c1:green:wancpu",
                .gpio           = DIR_615C1_GPIO_LED_GREEN_WANCPU,
                .active_low     = 1,
-        }, {
+       }, {
                .name           = "dir-615c1:green:wlan",
                .gpio           = DIR_615C1_GPIO_LED_GREEN_WLAN,
                .active_low     = 1,
-        }, {
-               .name           = "dir-615c1:green:status",
-               .gpio           = DIR_615C1_GPIO_LED_GREEN_STATUS,
+       }, {
+               .name           = "dir-615c1:green:status",
+               .gpio           = DIR_615C1_GPIO_LED_GREEN_STATUS,
                .active_low     = 1,
        }, {
                .name           = "dir-615c1:orange:wan",
@@ -116,18 +116,23 @@ static struct gpio_button dir_615c1_gpio_buttons[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
-               .code           = BTN_0,
+               .code           = KEY_RESTART,
                .threshold      = 3,
                .gpio           = DIR_615C1_GPIO_BTN_RESET,
        }, {
                .desc           = "wps",
                .type           = EV_KEY,
-               .code           = BTN_1,
+               .code           = KEY_WPS_BUTTON,
                .threshold      = 3,
                .gpio           = DIR_615C1_GPIO_BTN_WPS,
        }
 };
 
+#define DIR_615C1_LAN_PHYMASK  BIT(0)
+#define DIR_615C1_WAN_PHYMASK  BIT(4)
+#define DIR_615C1_MDIO_MASK    (~(DIR_615C1_LAN_PHYMASK | \
+                                  DIR_615C1_WAN_PHYMASK))
+
 static void __init dir_615c1_setup(void)
 {
        const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
@@ -136,19 +141,19 @@ static void __init dir_615c1_setup(void)
        u8 *wlan_mac = NULL;
 
        if (nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
-                                "lan_mac=", mac) == 0) {
-               ar71xx_set_mac_base(mac);
+                                       "lan_mac=", mac) == 0) {
+               ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+               ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
                wlan_mac = mac;
        }
 
-       ar71xx_add_device_mdio(0x0);
+       ar71xx_add_device_mdio(DIR_615C1_MDIO_MASK);
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+       ar71xx_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK;
 
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.phy_mask = 0x10;
+       ar71xx_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK;
 
        ar71xx_add_device_eth(0);
        ar71xx_add_device_eth(1);