ar71xx: rewrite WNDR3700/3800 handling

[openwrt.git] / target / linux / ar71xx / base-files / etc / defconfig / wndr3800 / network

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network
deleted file mode 100644 (file)
index 69d7dc7..0000000
--- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network
+++ /dev/null
@@ -1,69 +0,0 @@
-config interface loopback
-       option ifname   lo
-       option proto    static
-       option ipaddr   127.0.0.1
-       option netmask  255.0.0.0
-
-config interface lan
-       option ifname   eth0.1
-       option type     bridge
-       option proto    static
-       option ipaddr   192.168.1.1
-       option netmask  255.255.255.0
-
-config interface wan
-       option ifname   eth1
-       option proto    dhcp
-
-config switch
-       option name     rtl8366s
-       option reset    1
-       option enable_vlan 1
-       # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
-       option blinkrate        2
-
-config switch_vlan
-       option device   rtl8366s
-       option vlan     1
-       option ports    "0 1 2 3 5t"
-
-config switch_port
-       # Port 1 controls the GREEN configuration of LEDs for
-       # the switch and the section does not correspond to a real
-       # switch port.
-       #
-       # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
-       # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
-       # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
-       # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
-       # 14: Link (master); 15: separate register
-
-       option device           rtl8366s
-       option port             1
-       option led              6
-
-config switch_port
-       # Port 2 controls the ORANGE configuration of LEDs for
-       # the switch and the section does not correspond to a real
-       # switch port.
-       #
-       # See the key above for switch port 1 for the meaning of the
-       # 'led' setting below.
-       
-       option device           rtl8366s
-       option port             2
-       option led              9
-
-config switch_port
-       # Port 5 controls the configuration of the WAN LED and the
-       # section does not correspond to a real switch port.
-       #
-       # To toggle the use of green or orange LEDs for the WAN port,
-       # see the LED setting for wndr3700:green:wan in /etc/config/system.
-       #
-       # See the key above for switch port 1 for the meaning of the
-       # 'led' setting below.
-
-       option device           rtl8366s
-       option port             5
-       option led              2