Change default IPv6 config to enable DHCPv6-PD

[openwrt.git] / target / linux / ar71xx / base-files / etc / defconfig / wndr3700 / network

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
index eaf3fec..ad05525 100644 (file)
--- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
@@ -5,16 +5,24 @@ config interface loopback
        option netmask  255.0.0.0
 
 config interface lan
-       option ifname   eth0
+       option ifname   eth0.1
        option type     bridge
        option proto    static
        option ipaddr   192.168.1.1
        option netmask  255.255.255.0
+       option ip6assign 60
 
 config interface wan
        option ifname   eth1
        option proto    dhcp
 
+config interface wan6
+       option ifname   @wan
+       option proto    dhcpv6
+
+config globals globals
+       option ula_prefix auto
+
 config switch
        option name     rtl8366s
        option reset    1
@@ -25,23 +33,23 @@ config switch
 config switch_vlan
        option device   rtl8366s
        option vlan     1
-       option ports    "0 1 2 3 5"
+       option ports    "0 1 2 3 5t"
 
 config switch_port
        # Port 1 controls the GREEN configuration of LEDs for
        # the switch and the section does not correspond to a real
        # switch port.
        #
-       # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3-1000MB/s
-       # 4=100 MB/s; 5=10 MB/s; 6=1000 MB/s+activity; 7=100 MB/s+activity
-       # 8=10 MB/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+       # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+       # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+       # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
        # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
        # 14: Link (master); 15: separate register
-       
+
        option device           rtl8366s
        option port             1
-       option led              9
-       
+       option led              6
+
 config switch_port
        # Port 2 controls the ORANGE configuration of LEDs for
        # the switch and the section does not correspond to a real
@@ -52,10 +60,9 @@ config switch_port
        
        option device           rtl8366s
        option port             2
-       option led              6
-
+       option led              9
 
-config switch_port                                              
+config switch_port
        # Port 5 controls the configuration of the WAN LED and the
        # section does not correspond to a real switch port.
        #
@@ -67,5 +74,4 @@ config switch_port
 
        option device           rtl8366s
        option port             5
-       option led              6
-
+       option led              2