--- /dev/null
+diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
+--- linux.old/arch/mips/Makefile 2005-10-21 16:43:16.316951500 +0200
++++ linux.dev/arch/mips/Makefile 2005-11-10 01:10:45.775570250 +0100
+@@ -369,6 +369,16 @@
+ endif
+
+ #
++# Texas Instruments AR7
++#
++
++ifdef CONFIG_AR7
++LIBS += arch/mips/ar7/ar7.o
++SUBDIRS += arch/mips/ar7
++LOADADDR += 0x94020000
++endif
++
++#
+ # DECstation family
+ #
+ ifdef CONFIG_DECSTATION
+diff -urN linux.old/arch/mips/ar7/Makefile linux.dev/arch/mips/ar7/Makefile
+--- linux.old/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/Makefile 2005-11-10 01:13:51.443173750 +0100
+@@ -0,0 +1,14 @@
++.S.s:
++ $(CPP) $(AFLAGS) $< -o $*.s
++
++.S.o:
++ $(CC) $(AFLAGS) -c $< -o $*.o
++
++EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -DLITTLE_ENDIAN -D_LINK_KSEG0_
++O_TARGET := ar7.o
++
++obj-y := tnetd73xx_misc.o misc.o
++export-objs := misc.o irq.o init.o
++obj-y += setup.o irq.o int-handler.o reset.o init.o psp_env.o memory.o promlib.o cmdline.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c
+--- linux.old/arch/mips/ar7/cmdline.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/cmdline.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,88 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
++ */
++#include <linux/init.h>
++#include <linux/string.h>
++
++#include <asm/bootinfo.h>
++
++extern int prom_argc;
++extern int *_prom_argv;
++
++/*
++ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
++ * This macro take care of sign extension.
++ */
++#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
++
++char arcs_cmdline[CL_SIZE];
++#ifdef CONFIG_CMDLINE_BOOL
++char __initdata cfg_cmdline[] = CONFIG_CMDLINE;
++#endif
++
++char * __init prom_getcmdline(void)
++{
++ return &(arcs_cmdline[0]);
++}
++
++
++void __init prom_init_cmdline(void)
++{
++ char *cp, *end;
++ int actr;
++ char *env_cmdline = prom_getenv("kernel_args");
++ size_t len;
++
++ actr = 1; /* Always ignore argv[0] */
++
++ cp = end = &(arcs_cmdline[0]);
++ end += sizeof(arcs_cmdline);
++
++ if (env_cmdline) {
++ len = strlen(env_cmdline);
++ if (len > end - cp - 1)
++ len = end - cp - 1;
++ strncpy(cp, env_cmdline, len);
++ cp += len;
++ *cp++ = ' ';
++ }
++#ifdef CONFIG_CMDLINE_BOOL
++ else {
++ len = strlen(cfg_cmdline);
++ if (len > end - cp - 1)
++ len = end - cp - 1;
++ strncpy(cp, cfg_cmdline, len);
++ cp += len;
++ *cp++ = ' ';
++ }
++#endif
++
++ while(actr < prom_argc) {
++ len = strlen(prom_argv(actr));
++ if (len > end - cp - 1)
++ break;
++ strncpy(cp, prom_argv(actr), len);
++ cp += len;
++ *cp++ = ' ';
++ actr++;
++ }
++ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
++ --cp;
++ *cp = '\0';
++}
+diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c
+--- linux.old/arch/mips/ar7/init.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/init.c 2005-11-10 01:10:45.795571500 +0100
+@@ -0,0 +1,199 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * PROM library initialisation code.
++ */
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++
++#include <asm/io.h>
++#include <asm/mips-boards/prom.h>
++#include <asm/mips-boards/generic.h>
++
++#include <asm/ar7/adam2_env.h>
++
++int prom_argc;
++int *_prom_argv, *_prom_envp;
++
++/* max # of Adam2 environment variables */
++#define MAX_ENV_ENTRY 80
++
++static t_env_var local_envp[MAX_ENV_ENTRY];
++static int env_type = 0;
++int init_debug = 0;
++
++unsigned int max_env_entry;
++
++extern char *prom_psp_getenv(char *envname);
++
++static inline char *prom_adam2_getenv(char *envname)
++{
++ /*
++ * Return a pointer to the given environment variable.
++ * In 64-bit mode: we're using 64-bit pointers, but all pointers
++ * in the PROM structures are only 32-bit, so we need some
++ * workarounds, if we are running in 64-bit mode.
++ */
++ int i;
++ t_env_var *env = (t_env_var *) local_envp;
++
++ if (strcmp("bootloader", envname) == 0)
++ return "Adam2";
++
++ i = strlen(envname);
++ while (env->name) {
++ if(strncmp(envname, env->name, i) == 0) {
++ return(env->val);
++ }
++ env++;
++ }
++
++ return NULL;
++}
++
++/* XXX "bootloader" won't be returned.
++ * Better make it an element of local_envp */
++static inline t_env_var *
++prom_adam2_iterenv(t_env_var *env) {
++ if (!env)
++ env = local_envp;
++ else
++ env++;
++ if (env - local_envp > MAX_ENV_ENTRY || !env->name)
++ return 0;
++ return env;
++}
++
++char *prom_getenv(char *envname)
++{
++ if (env_type == 1)
++ return prom_psp_getenv(envname);
++ else
++ return prom_adam2_getenv(envname);
++}
++
++t_env_var *
++prom_iterenv(t_env_var *last)
++{
++ if (env_type == 1)
++ return 0; /* not yet implemented */
++ return prom_adam2_iterenv(last);
++}
++
++static inline unsigned char str2hexnum(unsigned char c)
++{
++ if (c >= '0' && c <= '9')
++ return c - '0';
++ if (c >= 'a' && c <= 'f')
++ return c - 'a' + 10;
++ return 0; /* foo */
++}
++
++static inline void str2eaddr(unsigned char *ea, unsigned char *str)
++{
++ int i;
++
++ for (i = 0; i < 6; i++) {
++ unsigned char num;
++
++ if((*str == '.') || (*str == ':'))
++ str++;
++ num = str2hexnum(*str++) << 4;
++ num |= (str2hexnum(*str++));
++ ea[i] = num;
++ }
++}
++
++int get_ethernet_addr(char *ethernet_addr)
++{
++ char *ethaddr_str;
++
++ ethaddr_str = prom_getenv("ethaddr");
++ if (!ethaddr_str) {
++ printk("ethaddr not set in boot prom\n");
++ return -1;
++ }
++ str2eaddr(ethernet_addr, ethaddr_str);
++
++ if (init_debug > 1) {
++ int i;
++ printk("get_ethernet_addr: ");
++ for (i=0; i<5; i++)
++ printk("%02x:", (unsigned char)*(ethernet_addr+i));
++ printk("%02x\n", *(ethernet_addr+i));
++ }
++
++ return 0;
++}
++
++struct psbl_rec {
++ unsigned int psbl_size;
++ unsigned int env_base;
++ unsigned int env_size;
++ unsigned int ffs_base;
++ unsigned int ffs_size;
++};
++
++static const char psp_env_version[] = "TIENV0.8";
++
++int __init prom_init(int argc, char **argv, char **envp)
++{
++ int i;
++
++ t_env_var *env = (t_env_var *) envp;
++ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x94000300));
++ void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
++
++ prom_argc = argc;
++ _prom_argv = (int *)argv;
++ _prom_envp = (int *)envp;
++
++ if(strcmp(psp_env, psp_env_version) == 0) {
++ /* PSPBOOT */
++
++ env_type = 1;
++ _prom_envp = psp_env;
++ max_env_entry = (psbl->env_size / 16) - 1;
++ } else {
++ /* Copy what we need locally so we are not dependent on
++ * bootloader RAM. In Adam2, the environment parameters
++ * are in flash but the table that references them is in
++ * RAM
++ */
++
++ for(i=0; i < MAX_ENV_ENTRY; i++, env++) {
++ if (env->name) {
++ local_envp[i].name = env->name;
++ local_envp[i].val = env->val;
++ } else {
++ local_envp[i].name = NULL;
++ local_envp[i].val = NULL;
++ }
++ }
++ }
++
++ set_io_port_base(0);
++
++ prom_printf("\nLINUX started...\n");
++ prom_init_cmdline();
++ prom_meminit();
++
++ return 0;
++}
+diff -urN linux.old/arch/mips/ar7/int-handler.S linux.dev/arch/mips/ar7/int-handler.S
+--- linux.old/arch/mips/ar7/int-handler.S 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/int-handler.S 2005-11-10 01:12:43.938955000 +0100
+@@ -0,0 +1,63 @@
++/*
++ * Copyright 2004 PMC-Sierra Inc.
++ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
++ * Adaption for AR7: Enrik Berkhan <enrik@akk.org>
++ *
++ * First-level interrupt dispatcher for the TI AR7
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++#define __ASSEMBLY__
++#include <linux/config.h>
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/addrspace.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
++
++/*
++ * First level interrupt dispatcher for TI AR7 based boards
++ */
++
++ .align 5
++ NESTED(ar7IRQ, PT_SIZE, sp)
++ SAVE_ALL
++ CLI
++ .set at
++
++ mfc0 t0, CP0_CAUSE
++ mfc0 t2, CP0_STATUS
++
++ and t0, t2
++
++ andi t1, t0, STATUSF_IP2 /* hw0 hardware interrupt */
++ bnez t1, ll_hw0_irq
++
++ andi t1, t0, STATUSF_IP7 /* R4k CPU timer */
++ bnez t1, ll_timer_irq
++
++ .set reorder
++
++ /* wrong alarm or masked ... */
++ j spurious_interrupt
++ nop
++ END(ar7IRQ)
++
++ .align 5
++
++ll_hw0_irq:
++ li a0, 2
++ move a1, sp
++ jal do_IRQ
++ j ret_from_irq
++
++ll_timer_irq:
++ li a0, 7
++ move a1, sp
++ jal do_IRQ
++ j ret_from_irq
++
++
+diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c
+--- linux.old/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/irq.c 2005-11-10 01:12:43.938955000 +0100
+@@ -0,0 +1,427 @@
++/*
++ * Nitin Dhingra, iamnd@ti.com
++ * Copyright (C) 2002 Texas Instruments, Inc. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Routines for generic manipulation of the interrupts found on the Texas
++ * Instruments avalanche board
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/interrupt.h>
++
++#include <asm/irq.h>
++#include <asm/mipsregs.h>
++#include <asm/ar7/ar7.h>
++#include <asm/ar7/avalanche_intc.h>
++
++#define shutdown_avalanche_irq disable_avalanche_irq
++#define mask_and_ack_avalanche_irq disable_avalanche_irq
++
++static unsigned int startup_avalanche_irq(unsigned int irq);
++static void end_avalanche_irq(unsigned int irq);
++void enable_avalanche_irq(unsigned int irq_nr);
++void disable_avalanche_irq(unsigned int irq_nr);
++void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs);
++
++static struct hw_interrupt_type avalanche_irq_type = {
++ "AR7",
++ startup_avalanche_irq,
++ shutdown_avalanche_irq,
++ enable_avalanche_irq,
++ disable_avalanche_irq,
++ mask_and_ack_avalanche_irq,
++ end_avalanche_irq,
++ NULL
++};
++
++static int ar7_irq_base;
++
++static struct irqaction ar7_hw0_action = {
++ ar7_hw0_interrupt, 0, 0, "AR7 on hw0", NULL, NULL
++};
++
++struct avalanche_ictrl_regs *avalanche_hw0_icregs; /* Interrupt control regs (primary) */
++struct avalanche_exctrl_regs *avalanche_hw0_ecregs; /* Exception control regs (secondary) */
++struct avalanche_ipace_regs *avalanche_hw0_ipaceregs;
++struct avalanche_channel_int_number *avalanche_hw0_chregs; /* Channel control registers */
++
++/*
++ This remaps interrupts to exist on other channels than the default
++ channels. essentially we can use the line # as the index for this
++ array
++ */
++
++static unsigned long line_to_channel[AVINTNUM(AVALANCHE_INT_END_PRIMARY)];
++unsigned long uni_secondary_interrupt = 0;
++
++static void end_avalanche_irq(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
++ enable_avalanche_irq(irq);
++}
++
++void disable_avalanche_irq(unsigned int irq_nr)
++{
++ unsigned long flags;
++ unsigned long chan_nr=0;
++
++ save_and_cli(flags);
++
++ /* irq_nr represents the line number for the interrupt. We must
++ * disable the channel number associated with that line number.
++ */
++
++ if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
++ chan_nr = AVINTNUM(irq_nr); /*CHECK THIS ALSO*/
++ else
++ chan_nr = line_to_channel[AVINTNUM(irq_nr)];/* WE NEED A LINE TO CHANNEL MAPPING FUNCTION HERE*/
++
++ /* disable the interrupt channel bit */
++
++ /* primary interrupt #'s 0-31 */
++
++ if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
++ avalanche_hw0_icregs->intecr1 = (1 << chan_nr);
++
++ /* primary interrupt #'s 32-39 */
++
++ else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
++ (chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
++ avalanche_hw0_icregs->intecr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++
++ else /* secondary interrupt #'s 0-31 */
++ avalanche_hw0_ecregs->exiecr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
++
++ restore_flags(flags);
++}
++
++void enable_avalanche_irq(unsigned int irq_nr)
++{
++ unsigned long flags;
++ unsigned long chan_nr=0;
++
++ save_and_cli(flags);
++
++ /* irq_nr represents the line number for the interrupt. We must
++ * disable the channel number associated with that line number.
++ */
++
++ if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
++ chan_nr = AVINTNUM(irq_nr);
++ else
++ chan_nr = line_to_channel[AVINTNUM(irq_nr)];
++
++ /* enable the interrupt channel bit */
++
++ /* primary interrupt #'s 0-31 */
++ if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
++ avalanche_hw0_icregs->intesr1 = (1 << chan_nr);
++
++ /* primary interrupt #'s 32 throuth 39 */
++ else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
++ (chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
++ avalanche_hw0_icregs->intesr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++
++ else /* secondary interrupt #'s 0-31 */
++ avalanche_hw0_ecregs->exiesr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
++
++ restore_flags(flags);
++}
++
++static unsigned int startup_avalanche_irq(unsigned int irq)
++{
++ enable_avalanche_irq(irq);
++ return 0; /* never anything pending */
++}
++
++void __init ar7_irq_init(int base)
++{
++ int i;
++
++ avalanche_hw0_icregs = (struct avalanche_ictrl_regs *)AVALANCHE_ICTRL_REGS_BASE;
++ avalanche_hw0_ecregs = (struct avalanche_exctrl_regs *)AVALANCHE_ECTRL_REGS_BASE;
++ avalanche_hw0_ipaceregs = (struct avalanche_ipace_regs *)AVALANCHE_IPACE_REGS_BASE;
++ avalanche_hw0_chregs = (struct avalanche_channel_int_number *)AVALANCHE_CHCTRL_REGS_BASE;
++
++ /* Disable interrupts and clear pending
++ */
++
++ avalanche_hw0_icregs->intecr1 = 0xffffffff; /* disable interrupts 0:31 */
++ avalanche_hw0_icregs->intcr1 = 0xffffffff; /* clear interrupts 0:31 */
++ avalanche_hw0_icregs->intecr2 = 0xff; /* disable interrupts 32:39 */
++ avalanche_hw0_icregs->intcr2 = 0xff; /* clear interrupts 32:39 */
++ avalanche_hw0_ecregs->exiecr = 0xffffffff; /* disable secondary interrupts 0:31 */
++ avalanche_hw0_ecregs->excr = 0xffffffff; /* clear secondary interrupts 0:31 */
++
++
++ // avalanche_hw0_ipaceregs->ipacep = (2*get_avalanche_vbus_freq()/1000000)*4;
++ /* hack for speeding up the pacing. */
++ printk("the pacing pre-scalar has been set as 600.\n");
++ avalanche_hw0_ipaceregs->ipacep = 600;
++ /* Channel to line mapping, Line to Channel mapping */
++
++ for(i = 0; i < 40; i++)
++ avalanche_int_set(i,i);
++
++ ar7_irq_base = base;
++ for (i = base; i <= base+40; i++)
++ {
++ irq_desc[i].status = IRQ_DISABLED;
++ irq_desc[i].action = 0;
++ irq_desc[i].depth = 1;
++ irq_desc[i].handler = &avalanche_irq_type;
++ }
++
++ setup_irq(2, &ar7_hw0_action);
++ set_c0_status(IE_IRQ0);
++
++ return;
++}
++
++void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs)
++{
++ int irq;
++ unsigned long int_line_number, status;
++ int i, chan_nr = 0;
++
++ int_line_number = ((avalanche_hw0_icregs->pintir >> 16) & 0x3F);
++ chan_nr = ((avalanche_hw0_icregs->pintir) & 0x3F);
++
++ if(chan_nr < 32) /* primary 0-31 */
++ {
++ if( chan_nr != uni_secondary_interrupt)
++ avalanche_hw0_icregs->intcr1 = (1<<chan_nr);
++
++ }
++
++ if((chan_nr < 40) && (chan_nr > 31)) /* primary 32-39 */
++ {
++ avalanche_hw0_icregs->intcr2 = (1<<(chan_nr-32));
++ }
++
++
++ /* If the Priority Interrupt Index Register returns 40 then no
++ * interrupts are pending
++ */
++
++ if(chan_nr == 40)
++ return;
++
++ if(chan_nr == uni_secondary_interrupt) /* secondary 0-31 */
++ {
++ status = avalanche_hw0_ecregs->exsr;
++ for(i=0; i < 32; i++)
++ {
++ if (status & 1<<i)
++ {
++ /* clear secondary interrupt */
++ avalanche_hw0_ecregs->excr = 1 << i;
++ break;
++ }
++ }
++ irq = i+40;
++
++ /* clear the universal secondary interrupt */
++ avalanche_hw0_icregs->intcr1 = 1 << uni_secondary_interrupt;
++
++ }
++ else
++ irq = chan_nr;
++
++ do_IRQ(irq + ar7_irq_base, regs);
++ return;
++}
++
++void avalanche_int_set(int channel, int line)
++{
++ switch(channel)
++ {
++ case(0):
++ avalanche_hw0_chregs->cintnr0 = line;
++ break;
++ case(1):
++ avalanche_hw0_chregs->cintnr1 = line;
++ break;
++ case(2):
++ avalanche_hw0_chregs->cintnr2 = line;
++ break;
++ case(3):
++ avalanche_hw0_chregs->cintnr3 = line;
++ break;
++ case(4):
++ avalanche_hw0_chregs->cintnr4 = line;
++ break;
++ case(5):
++ avalanche_hw0_chregs->cintnr5 = line;
++ break;
++ case(6):
++ avalanche_hw0_chregs->cintnr6 = line;
++ break;
++ case(7):
++ avalanche_hw0_chregs->cintnr7 = line;
++ break;
++ case(8):
++ avalanche_hw0_chregs->cintnr8 = line;
++ break;
++ case(9):
++ avalanche_hw0_chregs->cintnr9 = line;
++ break;
++ case(10):
++ avalanche_hw0_chregs->cintnr10 = line;
++ break;
++ case(11):
++ avalanche_hw0_chregs->cintnr11 = line;
++ break;
++ case(12):
++ avalanche_hw0_chregs->cintnr12 = line;
++ break;
++ case(13):
++ avalanche_hw0_chregs->cintnr13 = line;
++ break;
++ case(14):
++ avalanche_hw0_chregs->cintnr14 = line;
++ break;
++ case(15):
++ avalanche_hw0_chregs->cintnr15 = line;
++ break;
++ case(16):
++ avalanche_hw0_chregs->cintnr16 = line;
++ break;
++ case(17):
++ avalanche_hw0_chregs->cintnr17 = line;
++ break;
++ case(18):
++ avalanche_hw0_chregs->cintnr18 = line;
++ break;
++ case(19):
++ avalanche_hw0_chregs->cintnr19 = line;
++ break;
++ case(20):
++ avalanche_hw0_chregs->cintnr20 = line;
++ break;
++ case(21):
++ avalanche_hw0_chregs->cintnr21 = line;
++ break;
++ case(22):
++ avalanche_hw0_chregs->cintnr22 = line;
++ break;
++ case(23):
++ avalanche_hw0_chregs->cintnr23 = line;
++ break;
++ case(24):
++ avalanche_hw0_chregs->cintnr24 = line;
++ break;
++ case(25):
++ avalanche_hw0_chregs->cintnr25 = line;
++ break;
++ case(26):
++ avalanche_hw0_chregs->cintnr26 = line;
++ break;
++ case(27):
++ avalanche_hw0_chregs->cintnr27 = line;
++ break;
++ case(28):
++ avalanche_hw0_chregs->cintnr28 = line;
++ break;
++ case(29):
++ avalanche_hw0_chregs->cintnr29 = line;
++ break;
++ case(30):
++ avalanche_hw0_chregs->cintnr30 = line;
++ break;
++ case(31):
++ avalanche_hw0_chregs->cintnr31 = line;
++ break;
++ case(32):
++ avalanche_hw0_chregs->cintnr32 = line;
++ break;
++ case(33):
++ avalanche_hw0_chregs->cintnr33 = line;
++ break;
++ case(34):
++ avalanche_hw0_chregs->cintnr34 = line;
++ break;
++ case(35):
++ avalanche_hw0_chregs->cintnr35 = line;
++ break;
++ case(36):
++ avalanche_hw0_chregs->cintnr36 = line;
++ break;
++ case(37):
++ avalanche_hw0_chregs->cintnr37 = line;
++ break;
++ case(38):
++ avalanche_hw0_chregs->cintnr38 = line;
++ break;
++ case(39):
++ avalanche_hw0_chregs->cintnr39 = line;
++ break;
++ default:
++ printk("Error: Unknown Avalanche interrupt channel\n");
++ }
++
++ line_to_channel[line] = channel; /* Suraj check */
++
++ if (channel == UNIFIED_SECONDARY_INTERRUPT)
++ uni_secondary_interrupt = line;
++
++}
++
++
++#define AVALANCHE_MAX_PACING_BLK 3
++#define AVALANCHE_PACING_LOW_VAL 2
++#define AVALANCHE_PACING_HIGH_VAL 63
++
++int avalanche_request_pacing(int irq_nr, unsigned int blk_num,
++ unsigned int pace_value)
++{
++ unsigned int blk_offset;
++ unsigned long flags;
++
++ if(irq_nr < MIPS_EXCEPTION_OFFSET &&
++ irq_nr >= AVALANCHE_INT_END_PRIMARY)
++ return (0);
++
++ if(blk_num > AVALANCHE_MAX_PACING_BLK)
++ return(-1);
++
++ if(pace_value > AVALANCHE_PACING_HIGH_VAL &&
++ pace_value < AVALANCHE_PACING_LOW_VAL)
++ return(-1);
++
++ blk_offset = blk_num*8;
++
++ save_and_cli(flags);
++
++ /* disable the interrupt pacing, if enabled previously */
++ avalanche_hw0_ipaceregs->ipacemax &= ~(0xff << blk_offset);
++
++ /* clear the pacing map */
++ avalanche_hw0_ipaceregs->ipacemap &= ~(0xff << blk_offset);
++
++ /* setup the new values */
++ avalanche_hw0_ipaceregs->ipacemap |= ((AVINTNUM(irq_nr)) << blk_offset);
++ avalanche_hw0_ipaceregs->ipacemax |= ((0x80 | pace_value) << blk_offset);
++
++ restore_flags(flags);
++
++ return(0);
++}
+diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c
+--- linux.old/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/memory.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,103 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/bootmem.h>
++
++#include <asm/bootinfo.h>
++#include <asm/page.h>
++#include <asm/mips-boards/prom.h>
++
++extern char _ftext;
++extern int preserve_adam2;
++
++void __init prom_meminit(void)
++{
++ char *memsize_str;
++ unsigned long memsize, adam2size;
++
++ /* assume block before kernel is used by bootloader */
++ adam2size = __pa(&_ftext) - PHYS_OFFSET;
++
++ memsize_str = prom_getenv("memsize");
++ if (!memsize_str) {
++ memsize = 0x02000000;
++ } else {
++ memsize = simple_strtol(memsize_str, NULL, 0);
++ }
++
++#if 0
++ add_memory_region(0x00000000, PHYS_OFFSET, BOOT_MEM_RESERVED);
++#endif
++ add_memory_region(PHYS_OFFSET, adam2size, BOOT_MEM_ROM_DATA);
++ add_memory_region(PHYS_OFFSET+adam2size, memsize-adam2size,
++ BOOT_MEM_RAM);
++}
++
++unsigned long __init prom_free_prom_memory (void)
++{
++ int i;
++ unsigned long freed = 0;
++ unsigned long addr;
++
++ if (preserve_adam2) {
++ char *firstfree_str = prom_getenv("firstfreeaddress");
++ unsigned long firstfree = 0;
++
++ if (firstfree_str)
++ firstfree = simple_strtol(firstfree_str, NULL, 0);
++
++ if (firstfree && firstfree < (unsigned long)&_ftext) {
++ printk("Preserving ADAM2 memory.\n");
++ } else if (firstfree) {
++ printk("Can't preserve ADAM2 memory, "
++ "firstfreeaddress = %08lx.\n", firstfree);
++ preserve_adam2 = 0;
++ } else {
++ printk("Can't preserve ADAM2 memory, "
++ "firstfreeaddress unknown!\n");
++ preserve_adam2 = 0;
++ }
++ }
++
++ if (!preserve_adam2) {
++ for (i = 0; i < boot_mem_map.nr_map; i++) {
++ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
++ continue;
++
++ addr = boot_mem_map.map[i].addr;
++ while (addr < boot_mem_map.map[i].addr
++ + boot_mem_map.map[i].size) {
++ ClearPageReserved(virt_to_page(__va(addr)));
++ set_page_count(virt_to_page(__va(addr)), 1);
++ free_page((unsigned long)__va(addr));
++ addr += PAGE_SIZE;
++ freed += PAGE_SIZE;
++ }
++ }
++ printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
++ }
++ return freed >> PAGE_SHIFT;
++}
+diff -urN linux.old/arch/mips/ar7/misc.c linux.dev/arch/mips/ar7/misc.c
+--- linux.old/arch/mips/ar7/misc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/misc.c 2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,322 @@
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/avalanche_misc.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++
++#define TRUE 1
++
++static unsigned int avalanche_vbus_freq;
++
++REMOTE_VLYNQ_DEV_RESET_CTRL_FN p_remote_vlynq_dev_reset_ctrl = NULL;
++
++/*****************************************************************************
++ * Reset Control Module.
++ *****************************************************************************/
++void avalanche_reset_ctrl(unsigned int module_reset_bit,
++ AVALANCHE_RESET_CTRL_T reset_ctrl)
++{
++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++
++ if(module_reset_bit >= 32 && module_reset_bit < 64)
++ return;
++
++ if(module_reset_bit >= 64)
++ {
++ if(p_remote_vlynq_dev_reset_ctrl) {
++ p_remote_vlynq_dev_reset_ctrl(module_reset_bit - 64, reset_ctrl);
++ return;
++ }
++ else
++ return;
++ }
++
++ if(reset_ctrl == OUT_OF_RESET)
++ *reset_reg |= 1 << module_reset_bit;
++ else
++ *reset_reg &= ~(1 << module_reset_bit);
++ return;
++}
++
++AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(unsigned int module_reset_bit)
++{
++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++
++ return (((*reset_reg) & (1 << module_reset_bit)) ? OUT_OF_RESET : IN_RESET );
++}
++
++void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode)
++{
++ volatile unsigned int *sw_reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_SWRCR;
++ *sw_reset_reg = mode;
++}
++
++#define AVALANCHE_RST_CTRL_RSR_MASK 0x3
++
++AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status()
++{
++ volatile unsigned int *sys_reset_status = (unsigned int*) AVALANCHE_RST_CTRL_RSR;
++
++ return ( (AVALANCHE_SYS_RESET_STATUS_T) (*sys_reset_status & AVALANCHE_RST_CTRL_RSR_MASK) );
++}
++
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++#define AVALANCHE_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */
++#define AVALANCHE_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */
++
++
++void avalanche_power_ctrl(unsigned int module_power_bit, AVALANCHE_POWER_CTRL_T power_ctrl)
++{
++ volatile unsigned int *power_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++
++ if (power_ctrl == POWER_CTRL_POWER_DOWN)
++ /* power down the module */
++ *power_reg |= (1 << module_power_bit);
++ else
++ /* power on the module */
++ *power_reg &= (~(1 << module_power_bit));
++}
++
++AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int module_power_bit)
++{
++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++
++ return (((*power_status_reg) & (1 << module_power_bit)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP);
++}
++
++void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode)
++{
++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++
++ *power_status_reg &= AVALANCHE_GLOBAL_POWER_DOWN_MASK;
++ *power_status_reg |= ( power_mode << AVALANCHE_GLOBAL_POWER_DOWN_BIT);
++}
++
++AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void)
++{
++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++
++ return((AVALANCHE_SYS_POWER_MODE_T) (((*power_status_reg) & (~AVALANCHE_GLOBAL_POWER_DOWN_MASK))
++ >> AVALANCHE_GLOBAL_POWER_DOWN_BIT));
++}
++
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_init
++ ***************************************************************************/
++void avalanche_gpio_init(void)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++ spin_lock_irqsave(&closeLock, closeFlag);
++ *reset_reg |= (1 << AVALANCHE_GPIO_RESET_BIT);
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_ctrl
++ ***************************************************************************/
++int avalanche_gpio_ctrl(unsigned int gpio_pin,
++ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_ENBL;
++
++ if(gpio_pin >= 32)
++ return(-1);
++
++ spin_lock_irqsave(&closeLock, closeFlag);
++
++ if(pin_mode == GPIO_PIN)
++ {
++ *gpio_ctrl |= (1 << gpio_pin);
++
++ gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_DIR;
++
++ if(pin_direction == GPIO_INPUT_PIN)
++ *gpio_ctrl |= (1 << gpio_pin);
++ else
++ *gpio_ctrl &= ~(1 << gpio_pin);
++ }
++ else /* FUNCTIONAL PIN */
++ {
++ *gpio_ctrl &= ~(1 << gpio_pin);
++ }
++
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++
++ return (0);
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_out
++ ***************************************************************************/
++int avalanche_gpio_out_bit(unsigned int gpio_pin, int value)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
++
++ if(gpio_pin >= 32)
++ return(-1);
++
++ spin_lock_irqsave(&closeLock, closeFlag);
++ if(value == TRUE)
++ *gpio_out |= 1 << gpio_pin;
++ else
++ *gpio_out &= ~(1 << gpio_pin);
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++
++ return(0);
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_in
++ ***************************************************************************/
++int avalanche_gpio_in_bit(unsigned int gpio_pin)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
++ int ret_val = 0;
++
++ if(gpio_pin >= 32)
++ return(-1);
++
++ spin_lock_irqsave(&closeLock, closeFlag);
++ ret_val = ((*gpio_in) & (1 << gpio_pin));
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++
++ return (ret_val);
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_out_val
++ ***************************************************************************/
++int avalanche_gpio_out_value(unsigned int out_val, unsigned int out_mask,
++ unsigned int reg_index)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
++
++ if(reg_index > 0)
++ return(-1);
++
++ spin_lock_irqsave(&closeLock, closeFlag);
++ *gpio_out &= ~out_mask;
++ *gpio_out |= out_val;
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++
++ return(0);
++}
++
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_in_value
++ ***************************************************************************/
++int avalanche_gpio_in_value(unsigned int* in_val, unsigned int reg_index)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
++
++ if(reg_index > 0)
++ return(-1);
++
++ spin_lock_irqsave(&closeLock, closeFlag);
++ *in_val = *gpio_in;
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++
++ return (0);
++}
++
++/***********************************************************************
++ *
++ * Wakeup Control Module for TNETV1050 Communication Processor
++ *
++ ***********************************************************************/
++
++#define AVALANCHE_WAKEUP_POLARITY_BIT 16
++
++void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
++ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl,
++ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity)
++{
++ volatile unsigned int *wakeup_status_reg = (unsigned int*) AVALANCHE_WAKEUP_CTRL_WKCR;
++
++ /* enable/disable */
++ if (wakeup_ctrl == WAKEUP_ENABLED)
++ /* enable wakeup */
++ *wakeup_status_reg |= wakeup_int;
++ else
++ /* disable wakeup */
++ *wakeup_status_reg &= (~wakeup_int);
++
++ /* set polarity */
++ if (wakeup_polarity == WAKEUP_ACTIVE_LOW)
++ *wakeup_status_reg |= (wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
++ else
++ *wakeup_status_reg &= ~(wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
++}
++
++void avalanche_set_vbus_freq(unsigned int new_vbus_freq)
++{
++ avalanche_vbus_freq = new_vbus_freq;
++}
++
++unsigned int avalanche_get_vbus_freq()
++{
++ return(avalanche_vbus_freq);
++}
++
++unsigned int avalanche_get_chip_version_info()
++{
++ return(*(volatile unsigned int*)AVALANCHE_CVR);
++}
++
++SET_MDIX_ON_CHIP_FN_T p_set_mdix_on_chip_fn = NULL;
++
++int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation)
++{
++ if(p_set_mdix_on_chip_fn)
++ return (p_set_mdix_on_chip_fn(base_addr, operation));
++ else
++ return(-1);
++}
++
++unsigned int avalanche_is_mdix_on_chip(void)
++{
++ return(p_set_mdix_on_chip_fn ? 1:0);
++}
++
++EXPORT_SYMBOL(avalanche_reset_ctrl);
++EXPORT_SYMBOL(avalanche_get_reset_status);
++EXPORT_SYMBOL(avalanche_sys_reset);
++EXPORT_SYMBOL(avalanche_get_sys_last_reset_status);
++EXPORT_SYMBOL(avalanche_power_ctrl);
++EXPORT_SYMBOL(avalanche_get_power_status);
++EXPORT_SYMBOL(avalanche_set_global_power_mode);
++EXPORT_SYMBOL(avalanche_get_global_power_mode);
++EXPORT_SYMBOL(avalanche_set_mdix_on_chip);
++EXPORT_SYMBOL(avalanche_is_mdix_on_chip);
++
++EXPORT_SYMBOL(avalanche_gpio_init);
++EXPORT_SYMBOL(avalanche_gpio_ctrl);
++EXPORT_SYMBOL(avalanche_gpio_out_bit);
++EXPORT_SYMBOL(avalanche_gpio_in_bit);
++EXPORT_SYMBOL(avalanche_gpio_out_value);
++EXPORT_SYMBOL(avalanche_gpio_in_value);
++
++EXPORT_SYMBOL(avalanche_set_vbus_freq);
++EXPORT_SYMBOL(avalanche_get_vbus_freq);
++
++EXPORT_SYMBOL(avalanche_get_chip_version_info);
++
+diff -urN linux.old/arch/mips/ar7/platform.h linux.dev/arch/mips/ar7/platform.h
+--- linux.old/arch/mips/ar7/platform.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/platform.h 2005-11-10 01:10:45.799571750 +0100
+@@ -0,0 +1,65 @@
++#ifndef _PLATFORM_H_
++#define _PLATFORM_H_
++
++#include <linux/config.h>
++
++
++/* Important: The definition of ENV_SPACE_SIZE should match with that in
++ * PSPBoot. (/psp_boot/inc/psbl/env.h)
++ */
++#ifdef CONFIG_MIPS_AVALANCHE_TICFG
++#define ENV_SPACE_SIZE (10 * 1024)
++#endif
++
++#ifdef CONFIG_MIPS_TNETV1050SDB
++#define TNETV1050SDB
++#define DUAL_FLASH
++#endif
++
++#ifdef CONFIG_MIPS_AR7DB
++#define TNETD73XX_BOARD
++#define AR7DB
++#endif
++
++#ifdef CONFIG_MIPS_AR7RD
++#define TNETD73XX_BOARD
++#define AR7RD
++#endif
++
++#ifdef CONFIG_AR7WRD
++#define TNETD73XX_BOARD
++#define AR7WRD
++#endif
++
++#ifdef CONFIG_MIPS_AR7VWI
++#define TNETD73XX_BOARD
++#define AR7VWi
++#endif
++
++/* Merging from the DEV_DSL-PSPL4.3.2.7_Patch release. */
++#ifdef CONFIG_MIPS_AR7VW
++#define TNETD73XX_BOARD
++#define AR7WRD
++#endif
++
++#ifdef CONFIG_MIPS_AR7WI
++#define TNETD73XX_BOARD
++#define AR7Wi
++#endif
++
++#ifdef CONFIG_MIPS_AR7V
++#define TNETD73XX_BOARD
++#define AR7V
++#endif
++
++#ifdef CONFIG_MIPS_AR7V
++#define TNETD73XX_BOARD
++#define AR7V
++#endif
++
++#ifdef CONFIG_MIPS_WA1130
++#define AVALANCHE
++#define WLAN
++#endif
++
++#endif
+diff -urN linux.old/arch/mips/ar7/promlib.c linux.dev/arch/mips/ar7/promlib.c
+--- linux.old/arch/mips/ar7/promlib.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/promlib.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,48 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Putting things on the screen/serial line using Adam2 facilities.
++ */
++
++#include <linux/types.h>
++#include <asm/addrspace.h>
++
++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR \
++ (AVALANCHE_YAMON_FUNCTION_BASE + 1 * 0x4)
++#define AVALANCHE_YAMON_PROM_EXIT \
++ (AVALANCHE_YAMON_FUNCTION_BASE + 8 * 0x4)
++
++void prom_putchar(char c)
++{
++ static char buf[1];
++ void (*prom_print_str)(unsigned int dummy, char *s, int len) =
++ (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR);
++
++ buf[0] = c;
++ prom_print_str(1, buf, 1);
++ return;
++}
++
++void adam2_exit(int retval)
++{
++ void (*yamon_exit)(int retval) =
++ (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_EXIT);
++
++ yamon_exit(retval);
++ return;
++}
+diff -urN linux.old/arch/mips/ar7/psp_env.c linux.dev/arch/mips/ar7/psp_env.c
+--- linux.old/arch/mips/ar7/psp_env.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/psp_env.c 2005-11-10 01:10:45.799571750 +0100
+@@ -0,0 +1,350 @@
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <asm/io.h>
++
++#include "platform.h"
++
++#define ENV_CELL_SIZE 16
++
++/* control field decode */
++#define ENV_GARBAGE_BIT 0x01 /* Env is garbage if this bit is off */
++#define ENV_DYNAMIC_BIT 0x02 /* Env is dynamic if this bit is off */
++
++#define ENV_CTRL_MASK 0x03
++#define ENV_PREFINED (ENV_GARBAGE_BIT | ENV_DYNAMIC_BIT)
++#define ENV_DYNAMIC (ENV_GARBAGE_BIT)
++
++struct env_variable {
++ unsigned char varNum;
++ unsigned char ctrl;
++ unsigned short chksum;
++ unsigned char numCells;
++ unsigned char data[ENV_CELL_SIZE - 5]; /* The data section starts
++ * here, continues for
++ * numCells.
++ */
++};
++
++extern unsigned int max_env_entry;
++
++/* Internal macros */
++#define get_next_block(var) ((struct env_variable *)( (char*)(var) + (var)->numCells * ENV_CELL_SIZE))
++
++typedef enum ENV_VARS {
++ env_vars_start = 0,
++ CPUFREQ,
++ MEMSZ,
++ FLASHSZ,
++ MODETTY0,
++ MODETTY1,
++ PROMPT,
++ BOOTCFG,
++ HWA_0,
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ HWA_1,
++#endif
++#if !defined(TNETV1020_BOARD)
++ HWA_RNDIS,
++#endif
++#if defined (TNETD73XX_BOARD)
++ HWA_3,
++#endif
++ IPA,
++ IPA_SVR,
++ BLINE_MAC0,
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ BLINE_MAC1,
++#endif
++#if !defined(TNETV1020_BOARD)
++ BLINE_RNDIS,
++#endif
++#if defined (TNETD73XX_BOARD)
++ BLINE_ATM,
++#endif
++#if !defined(TNETV1020_BOARD)
++ USB_PID,
++ USB_VID,
++ USB_EPPOLLI,
++#endif
++ IPA_GATEWAY,
++ SUBNET_MASK,
++#if defined (TNETV1050_BOARD)
++ BLINE_ESWITCH,
++#endif
++#if !defined(TNETV1020_BOARD)
++ USB_SERIAL,
++ HWA_HRNDIS, /* Host (PC) side RNDIS address */
++#endif
++ REMOTE_USER,
++ REMOTE_PASS,
++ REMOTE_DIR,
++ SYSFREQ,
++ LINK_TIMEOUT,
++#ifndef AVALANCHE /* Avalanche boards use only one mac port */
++ MAC_PORT,
++#endif
++ PATH,
++ HOSTNAME,
++#ifdef WLAN
++ HW_REV_MAJOR,
++ HW_REV_MINOR,
++ HW_PATCH,
++ SW_PATCH,
++ SERIAL_NUMBER,
++#endif
++ TFTPCFG,
++#if defined (TNETV1050_BOARD)
++ HWA_ESWITCH,
++#endif
++ /*
++ * Add new env variables here.
++ * NOTE: New environment variables should always be placed at the end, ie
++ * just before env_vars_end.
++ */
++
++ env_vars_end
++} ENV_VARS;
++
++
++struct env_description {
++ ENV_VARS idx;
++ char *nm;
++ char *alias;
++};
++
++#define ENVSTR(x) #x
++#define _ENV_ENTRY(x) {.idx = x, .nm = ENVSTR(x), .alias = NULL}
++
++struct env_description env_ns[] = {
++ _ENV_ENTRY(env_vars_start), /* start. */
++ _ENV_ENTRY(CPUFREQ),
++ _ENV_ENTRY(MEMSZ),
++ _ENV_ENTRY(FLASHSZ),
++ _ENV_ENTRY(MODETTY0),
++ _ENV_ENTRY(MODETTY1),
++ _ENV_ENTRY(PROMPT),
++ _ENV_ENTRY(BOOTCFG),
++ _ENV_ENTRY(HWA_0),
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ _ENV_ENTRY(HWA_1),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(HWA_RNDIS),
++#endif
++#if defined (TNETD73XX_BOARD)
++ _ENV_ENTRY(HWA_3),
++#endif
++ _ENV_ENTRY(IPA),
++ _ENV_ENTRY(IPA_SVR),
++ _ENV_ENTRY(IPA_GATEWAY),
++ _ENV_ENTRY(SUBNET_MASK),
++ _ENV_ENTRY(BLINE_MAC0),
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ _ENV_ENTRY(BLINE_MAC1),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(BLINE_RNDIS),
++#endif
++#if defined (TNETD73XX_BOARD)
++ _ENV_ENTRY(BLINE_ATM),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(USB_PID),
++ _ENV_ENTRY(USB_VID),
++ _ENV_ENTRY(USB_EPPOLLI),
++#endif
++#if defined (TNETV1050_BOARD)
++ _ENV_ENTRY(BLINE_ESWITCH),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(USB_SERIAL),
++ _ENV_ENTRY(HWA_HRNDIS),
++#endif
++ _ENV_ENTRY(REMOTE_USER),
++ _ENV_ENTRY(REMOTE_PASS),
++ _ENV_ENTRY(REMOTE_DIR),
++ _ENV_ENTRY(SYSFREQ),
++ _ENV_ENTRY(LINK_TIMEOUT),
++#ifndef AVALANCHE /* Avalanche boards use only one mac port */
++ _ENV_ENTRY(MAC_PORT),
++#endif
++ _ENV_ENTRY(PATH),
++ _ENV_ENTRY(HOSTNAME),
++#ifdef WLAN
++ _ENV_ENTRY(HW_REV_MAJOR),
++ _ENV_ENTRY(HW_REV_MINOR),
++ _ENV_ENTRY(HW_PATCH),
++ _ENV_ENTRY(SW_PATCH),
++ _ENV_ENTRY(SERIAL_NUMBER),
++#endif
++ _ENV_ENTRY(TFTPCFG),
++#if defined (TNETV1050_BOARD)
++ _ENV_ENTRY(HWA_ESWITCH),
++#endif
++ /*
++ * Add new entries below this.
++ */
++ /* Adam2 environment name alias. */
++ { .idx = IPA, .nm = "my_ipaddress" },
++ { .idx = CPUFREQ, .nm = "cpufrequency" },
++ { .idx = SYSFREQ, .nm = "sysfrequency" },
++ { .idx = HWA_0, .nm = "maca" },
++#ifndef AVALANCHE
++ { .idx = HWA_1, .nm = "macb" },
++#endif
++ { .idx = MODETTY0, .nm = "modetty0" },
++ { .idx = MODETTY1, .nm = "modetty1" },
++ { .idx = MEMSZ, .nm = "memsize" },
++
++ _ENV_ENTRY(env_vars_end) /* delimiter. */
++};
++
++static inline int var_to_idx(const char* var)
++{
++ int ii;
++
++ /* go over the list of pre-defined environment variables */
++ for (ii = env_vars_start; env_ns[ii].idx != env_vars_end; ii++){
++ /* check if the env variable is listed */
++ if (strcmp(env_ns[ii].nm, var) == 0) {
++ return env_ns[ii].idx;
++ }
++
++ /* if an alias is present, check if the alias matches
++ * the description
++ */
++ if (env_ns[ii].alias != NULL) {
++ if (strcmp(env_ns[ii].alias, var) == 0) {
++ return env_ns[ii].idx;
++ }
++ }
++ }
++ return 0;
++}
++
++extern int *_prom_envp;
++
++/* FIXME: reading from the flash is extremly unstable. Sometime a read returns garbage,
++ * the next read some seconds later is ok. It looks like something is hidding or
++ * overlay the flash address at 0xb0000000. Is this possible?
++ *
++ * The readb() and while() usage below is a attempt of a workarround - with limited success.
++ */
++
++static inline struct env_variable* get_var_by_number(int index)
++{
++ struct env_variable *env_var = (struct env_variable *)_prom_envp;
++ volatile unsigned char nr;
++ int i;
++
++ env_var++; /* skip signature */
++
++ i = 0;
++ nr = readb(&(env_var->varNum));
++
++ while (i < max_env_entry && nr != 0xFF) {
++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_PREFINED) {
++ if (nr == index) {
++ return env_var;
++ }
++ }
++ i++;
++ env_var = get_next_block(env_var);
++ nr = readb(&(env_var->varNum));
++ }
++
++ return NULL;
++}
++
++static inline struct env_variable* get_var_by_name(char *var)
++{
++ struct env_variable *env_var = (struct env_variable *)_prom_envp;
++ volatile unsigned char nr;
++ int i;
++
++ env_var++; /* skip signature */
++
++ nr = readb(&(env_var->varNum));
++ i = 0;
++
++ while (i < max_env_entry && nr != 0xFF) {
++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) {
++ if (strcmp(var, env_var->data) == 0)
++ return env_var;
++ }
++ i++;
++ env_var = get_next_block(env_var);
++ nr = readb(&(env_var->varNum));
++ }
++ return NULL;
++}
++
++static inline struct env_variable* get_var(char *var)
++{
++ int index = var_to_idx(var);
++
++ if (index)
++ return get_var_by_number(index);
++ else
++ return get_var_by_name(var);
++
++ return NULL;
++}
++
++static inline char *get_value(struct env_variable* env_var)
++{
++ unsigned char *name;
++ unsigned char *value;
++ unsigned short chksum;
++ int i;
++
++ chksum = env_var->varNum + env_var->ctrl + env_var->numCells;
++
++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) {
++ name = env_var->data;
++ value = env_var->data + strlen(name) + 1;
++
++ for(i = 0; i < strlen(name); i++)
++ chksum += name[i];
++ } else
++ value = env_var->data;
++
++ for (i = 0; i < strlen(value); i++)
++ chksum += value[i];
++
++ chksum += env_var->chksum;
++ chksum = ~(chksum);
++
++ if(chksum != 0) {
++ return NULL;
++ }
++
++ return value;
++}
++
++struct psbl_rec {
++ unsigned int psbl_size;
++ unsigned int env_base;
++ unsigned int env_size;
++ unsigned int ffs_base;
++ unsigned int ffs_size;
++};
++
++char *prom_psp_getenv(char *envname)
++{
++ struct env_variable* env_var;
++ char *value;
++
++ if (strcmp("bootloader", envname) == 0)
++ return "PSPBoot";
++
++ if (!(env_var = get_var(envname)))
++ return NULL;
++
++ value = get_value(env_var);
++
++ return value;
++}
+diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c
+--- linux.old/arch/mips/ar7/reset.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/reset.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,98 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Reset the AR7 boards.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <asm/mipsregs.h>
++#include <asm/reboot.h>
++#include <asm/addrspace.h>
++
++int preserve_adam2 = 1;
++
++extern void adam2_exit(int retval);
++
++static void ar7_machine_restart(char *command);
++static void ar7_machine_halt(void);
++static void ar7_machine_power_off(void);
++
++static void ar7_machine_restart(char *command)
++{
++ volatile uint32_t *softres_reg = (void *)(KSEG1ADDR(0x08611600 + 0x4));
++
++ *softres_reg = 1;
++}
++
++static void ar7_machine_halt(void)
++{
++
++ if (preserve_adam2) {
++ set_c0_status(ST0_BEV);
++ adam2_exit(0);
++ } else {
++ /* I'd like to have Alt-SysRq-b work in this state.
++ * What's missing here? The timer interrupt is still running.
++ * Why doesn't the UART work anymore? */
++ while(1) {
++ __asm__(".set\tmips3\n\t"
++ "wait\n\t"
++ ".set\tmips0");
++ }
++ }
++}
++
++static void ar7_machine_power_off(void)
++{
++ volatile uint32_t *power_reg = (void *)(KSEG1ADDR(0x08610A00));
++ uint32_t power_state = *power_reg;
++
++ /* add something to turn LEDs off? */
++
++ power_state &= ~(3 << 30);
++ power_state |= (3 << 30); /* power down */
++ *power_reg = power_state;
++
++ printk("after power down?\n");
++}
++
++void ar7_reboot_setup(void)
++{
++ _machine_restart = ar7_machine_restart;
++ _machine_halt = ar7_machine_halt;
++ _machine_power_off = ar7_machine_power_off;
++}
++
++static int __init ar7_do_preserve_adam2(char *s)
++{
++ if (!strcmp(s, "no") || !strcmp(s, "0"))
++ preserve_adam2 = 0;
++ else
++ preserve_adam2 = 1;
++ return 1;
++}
++
++__setup("adam2=", ar7_do_preserve_adam2);
+diff -urN linux.old/arch/mips/ar7/setup.c linux.dev/arch/mips/ar7/setup.c
+--- linux.old/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/setup.c 2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,143 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/irq.h>
++
++#include <asm/processor.h>
++#include <asm/irq.h>
++#include <asm/irq_cpu.h>
++#include <asm/time.h>
++#include <asm/mipsregs.h>
++#include <asm/mips-boards/prom.h>
++
++#ifdef CONFIG_KGDB
++extern void rs_kgdb_hook(int);
++extern void breakpoint(void);
++int remote_debug = 0;
++#endif
++
++extern void ar7_reboot_setup(void);
++extern void ar7_irq_init(int);
++extern asmlinkage void ar7IRQ(void);
++
++void ar7_time_init(void)
++{
++ /* XXX runtime */
++ mips_hpt_frequency = CONFIG_AR7_CPU * 500000;
++}
++
++void ar7_timer_setup(struct irqaction *irq)
++{
++ setup_irq(7, irq);
++ set_c0_status(IE_IRQ5);
++}
++
++void __init init_IRQ(void)
++{
++ init_generic_irq();
++ mips_cpu_irq_init(0);
++ ar7_irq_init(8);
++
++ /* Now safe to set the exception vector. */
++ set_except_vector(0, ar7IRQ);
++
++#ifdef CONFIG_KGDB
++ if (remote_debug)
++ {
++ set_debug_traps();
++ breakpoint();
++ }
++#endif
++}
++
++const char *get_system_type(void)
++{
++ return "Texas Instruments AR7";
++}
++
++void __init ar7_setup(void)
++{
++#ifdef CONFIG_KGDB
++ int rs_putDebugChar(char);
++ char rs_getDebugChar(void);
++ extern int (*generic_putDebugChar)(char);
++ extern char (*generic_getDebugChar)(void);
++#endif
++ char *argptr;
++#ifdef CONFIG_SERIAL_CONSOLE
++ argptr = prom_getcmdline();
++ if ((argptr = strstr(argptr, "console=")) == NULL) {
++ char console[20];
++ char *s;
++ int i = 0;
++
++ s = prom_getenv("modetty0");
++ strcpy(console, "38400");
++
++ if (s != NULL) {
++ while (s[i] >= '0' && s[i] <= '9')
++ i++;
++
++ if (i > 0) {
++ strncpy(console, s, i);
++ console[i] = 0;
++ }
++ }
++
++ argptr = prom_getcmdline();
++ strcat(argptr, " console=ttyS0,");
++ strcat(argptr, console);
++ }
++#endif
++
++#ifdef CONFIG_KGDB
++ argptr = prom_getcmdline();
++ if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
++ int line;
++ argptr += strlen("kgdb=ttyS");
++ if (*argptr != '0' && *argptr != '1')
++ printk("KGDB: Uknown serial line /dev/ttyS%c, "
++ "falling back to /dev/ttyS1\n", *argptr);
++ line = *argptr == '0' ? 0 : 1;
++ printk("KGDB: Using serial line /dev/ttyS%d for session\n",
++ line ? 1 : 0);
++
++ rs_kgdb_hook(line);
++ generic_putDebugChar = rs_putDebugChar;
++ generic_getDebugChar = rs_getDebugChar;
++
++ prom_printf("KGDB: Using serial line /dev/ttyS%d for session, "
++ "please connect your debugger\n", line ? 1 : 0);
++
++ remote_debug = 1;
++ /* Breakpoints are in init_IRQ() */
++ }
++#endif
++
++ argptr = prom_getcmdline();
++ if ((argptr = strstr(argptr, "nofpu")) != NULL)
++ cpu_data[0].options &= ~MIPS_CPU_FPU;
++
++ ar7_reboot_setup();
++
++ board_time_init = ar7_time_init;
++ board_timer_setup = ar7_timer_setup;
++}
+diff -urN linux.old/arch/mips/ar7/tnetd73xx_misc.c linux.dev/arch/mips/ar7/tnetd73xx_misc.c
+--- linux.old/arch/mips/ar7/tnetd73xx_misc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c 2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,921 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Misc modules API Source
++ ******************************************************************************
++ * FILE NAME: tnetd73xx_misc.c
++ *
++ * DESCRIPTION: Clock Control, Reset Control, Power Management, GPIO
++ * FSER Modules API
++ * As per TNETD73xx specifications
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - Sharath Kumar PSP TII
++ * 14 Feb 03 - Anant Gole PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#include <linux/types.h>
++#include <asm/ar7/tnetd73xx.h>
++#include <asm/ar7/tnetd73xx_misc.h>
++
++/* TNETD73XX Revision */
++u32 tnetd73xx_get_revision(void)
++{
++ /* Read Chip revision register - This register is from GPIO module */
++ return ( (u32) REG32_DATA(TNETD73XX_CVR));
++}
++
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
++
++
++void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module, TNETD73XX_RESET_CTRL_T reset_ctrl)
++{
++ u32 reset_status;
++
++ /* read current reset register */
++ REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status);
++
++ if (reset_ctrl == OUT_OF_RESET)
++ {
++ /* bring module out of reset */
++ reset_status |= (1 << reset_module);
++ }
++ else
++ {
++ /* put module in reset */
++ reset_status &= (~(1 << reset_module));
++ }
++
++ /* write to the reset register */
++ REG32_WRITE(TNETD73XX_RST_CTRL_PRCR, reset_status);
++}
++
++
++TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status (TNETD73XX_RESET_MODULE_T reset_module)
++{
++ u32 reset_status;
++
++ REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status);
++ return ( (reset_status & (1 << reset_module)) ? OUT_OF_RESET : IN_RESET );
++}
++
++void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode)
++{
++ REG32_WRITE(TNETD73XX_RST_CTRL_SWRCR, mode);
++}
++
++#define TNETD73XX_RST_CTRL_RSR_MASK 0x3
++
++TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status()
++{
++ u32 sys_reset_status;
++
++ REG32_READ(TNETD73XX_RST_CTRL_RSR, sys_reset_status);
++
++ return ( (TNETD73XX_SYS_RESET_STATUS_T) (sys_reset_status & TNETD73XX_RST_CTRL_RSR_MASK) );
++}
++
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++#define TNETD73XX_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */
++#define TNETD73XX_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */
++
++
++void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl)
++{
++ u32 power_status;
++
++ /* read current power down control register */
++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++ if (power_ctrl == POWER_CTRL_POWER_DOWN)
++ {
++ /* power down the module */
++ power_status |= (1 << power_module);
++ }
++ else
++ {
++ /* power on the module */
++ power_status &= (~(1 << power_module));
++ }
++
++ /* write to the reset register */
++ REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status);
++}
++
++TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module)
++{
++ u32 power_status;
++
++ /* read current power down control register */
++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++ return ( (power_status & (1 << power_module)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP );
++}
++
++void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode)
++{
++ u32 power_status;
++
++ /* read current power down control register */
++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++ power_status &= TNETD73XX_GLOBAL_POWER_DOWN_MASK;
++ power_status |= ( power_mode << TNETD73XX_GLOBAL_POWER_DOWN_BIT);
++
++ /* write to power down control register */
++ REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status);
++}
++
++TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode()
++{
++ u32 power_status;
++
++ /* read current power down control register */
++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++ power_status &= (~TNETD73XX_GLOBAL_POWER_DOWN_MASK);
++ power_status = ( power_status >> TNETD73XX_GLOBAL_POWER_DOWN_BIT);
++
++ return ( (TNETD73XX_SYS_POWER_MODE_T) power_status );
++}
++
++
++/*****************************************************************************
++ * Wakeup Control
++ *****************************************************************************/
++
++#define TNETD73XX_WAKEUP_POLARITY_BIT 16
++
++void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int,
++ TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl,
++ TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity)
++{
++ u32 wakeup_status;
++
++ /* read the wakeup control register */
++ REG32_READ(TNETD73XX_POWER_CTRL_WKCR, wakeup_status);
++
++ /* enable/disable */
++ if (wakeup_ctrl == WAKEUP_ENABLED)
++ {
++ /* enable wakeup */
++ wakeup_status |= wakeup_int;
++ }
++ else
++ {
++ /* disable wakeup */
++ wakeup_status &= (~wakeup_int);
++ }
++
++ /* set polarity */
++ if (wakeup_polarity == WAKEUP_ACTIVE_LOW)
++ {
++ wakeup_status |= (wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT);
++ }
++ else
++ {
++ wakeup_status &= ~(wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT);
++ }
++
++ /* write the wakeup control register */
++ REG32_WRITE(TNETD73XX_POWER_CTRL_WKCR, wakeup_status);
++}
++
++
++/*****************************************************************************
++ * FSER Control
++ *****************************************************************************/
++
++void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode)
++{
++ REG32_WRITE(TNETD73XX_FSER_BASE, fser_mode);
++}
++
++/*****************************************************************************
++ * Clock Control
++ *****************************************************************************/
++
++#define MIN(x,y) ( ((x) < (y)) ? (x) : (y) )
++#define MAX(x,y) ( ((x) > (y)) ? (x) : (y) )
++#define ABS(x) ( ((signed)(x) > 0) ? (x) : (-(x)) )
++#define CEIL(x,y) ( ((x) + (y) / 2) / (y) )
++
++#define CLKC_CLKCR(x) (TNETD73XX_CLOCK_CTRL_BASE + 0x20 + (0x20 * (x)))
++#define CLKC_CLKPLLCR(x) (TNETD73XX_CLOCK_CTRL_BASE + 0x30 + (0x20 * (x)))
++
++#define CLKC_PRE_DIVIDER 0x0000001F
++#define CLKC_POST_DIVIDER 0x001F0000
++
++#define CLKC_PLL_STATUS 0x1
++#define CLKC_PLL_FACTOR 0x0000F000
++
++#define BOOTCR_PLL_BYPASS (1 << 5)
++#define BOOTCR_MIPS_ASYNC_MODE (1 << 25)
++
++#define MIPS_PLL_SELECT 0x00030000
++#define SYSTEM_PLL_SELECT 0x0000C000
++#define USB_PLL_SELECT 0x000C0000
++#define ADSLSS_PLL_SELECT 0x00C00000
++
++#define MIPS_AFECLKI_SELECT 0x00000000
++#define MIPS_REFCLKI_SELECT 0x00010000
++#define MIPS_XTAL3IN_SELECT 0x00020000
++
++#define SYSTEM_AFECLKI_SELECT 0x00000000
++#define SYSTEM_REFCLKI_SELECT 0x00004000
++#define SYSTEM_XTAL3IN_SELECT 0x00008000
++#define SYSTEM_MIPSPLL_SELECT 0x0000C000
++
++#define USB_SYSPLL_SELECT 0x00000000
++#define USB_REFCLKI_SELECT 0x00040000
++#define USB_XTAL3IN_SELECT 0x00080000
++#define USB_MIPSPLL_SELECT 0x000C0000
++
++#define ADSLSS_AFECLKI_SELECT 0x00000000
++#define ADSLSS_REFCLKI_SELECT 0x00400000
++#define ADSLSS_XTAL3IN_SELECT 0x00800000
++#define ADSLSS_MIPSPLL_SELECT 0x00C00000
++
++#define SYS_MAX CLK_MHZ(150)
++#define SYS_MIN CLK_MHZ(1)
++
++#define MIPS_SYNC_MAX SYS_MAX
++#define MIPS_ASYNC_MAX CLK_MHZ(160)
++#define MIPS_MIN CLK_MHZ(1)
++
++#define USB_MAX CLK_MHZ(100)
++#define USB_MIN CLK_MHZ(1)
++
++#define ADSL_MAX CLK_MHZ(180)
++#define ADSL_MIN CLK_MHZ(1)
++
++#define PLL_MUL_MAXFACTOR 15
++#define MAX_DIV_VALUE 32
++#define MIN_DIV_VALUE 1
++
++#define MIN_PLL_INP_FREQ CLK_MHZ(8)
++#define MAX_PLL_INP_FREQ CLK_MHZ(100)
++
++#define DIVIDER_LOCK_TIME 10100
++#define PLL_LOCK_TIME 10100 * 75
++
++
++
++ /****************************************************************************
++ * DATA PURPOSE: PRIVATE Variables
++ **************************************************************************/
++ static u32 *clk_src[4];
++ static u32 mips_pll_out;
++ static u32 sys_pll_out;
++ static u32 afeclk_inp;
++ static u32 refclk_inp;
++ static u32 xtal_inp;
++ static u32 present_min;
++ static u32 present_max;
++
++ /* Forward References */
++ static u32 find_gcd(u32 min, u32 max);
++ static u32 compute_prediv( u32 divider, u32 min, u32 max);
++ static void get_val(u32 base_freq, u32 output_freq,u32 *multiplier, u32 *divider);
++ static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id);
++ static void find_approx(u32 *,u32 *,u32);
++
++ /****************************************************************************
++ * FUNCTION: tnetd73xx_clkc_init
++ ****************************************************************************
++ * Description: The routine initializes the internal variables depending on
++ * on the sources selected for different clocks.
++ ***************************************************************************/
++void tnetd73xx_clkc_init(u32 afeclk, u32 refclk, u32 xtal3in)
++{
++
++ u32 choice;
++
++ afeclk_inp = afeclk;
++ refclk_inp = refclk;
++ xtal_inp = xtal3in;
++
++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & MIPS_PLL_SELECT;
++ switch(choice)
++ {
++ case MIPS_AFECLKI_SELECT:
++ clk_src[CLKC_MIPS] = &afeclk_inp;
++ break;
++
++ case MIPS_REFCLKI_SELECT:
++ clk_src[CLKC_MIPS] = &refclk_inp;
++ break;
++
++ case MIPS_XTAL3IN_SELECT:
++ clk_src[CLKC_MIPS] = &xtal_inp;
++ break;
++
++ default :
++ clk_src[CLKC_MIPS] = 0;
++
++ }
++
++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & SYSTEM_PLL_SELECT;
++ switch(choice)
++ {
++ case SYSTEM_AFECLKI_SELECT:
++ clk_src[CLKC_SYS] = &afeclk_inp;
++ break;
++
++ case SYSTEM_REFCLKI_SELECT:
++ clk_src[CLKC_SYS] = &refclk_inp;
++ break;
++
++ case SYSTEM_XTAL3IN_SELECT:
++ clk_src[CLKC_SYS] = &xtal_inp;
++ break;
++
++ case SYSTEM_MIPSPLL_SELECT:
++ clk_src[CLKC_SYS] = &mips_pll_out;
++ break;
++
++ default :
++ clk_src[CLKC_SYS] = 0;
++
++ }
++
++
++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & ADSLSS_PLL_SELECT;
++ switch(choice)
++ {
++ case ADSLSS_AFECLKI_SELECT:
++ clk_src[CLKC_ADSLSS] = &afeclk_inp;
++ break;
++
++ case ADSLSS_REFCLKI_SELECT:
++ clk_src[CLKC_ADSLSS] = &refclk_inp;
++ break;
++
++ case ADSLSS_XTAL3IN_SELECT:
++ clk_src[CLKC_ADSLSS] = &xtal_inp;
++ break;
++
++ case ADSLSS_MIPSPLL_SELECT:
++ clk_src[CLKC_ADSLSS] = &mips_pll_out;
++ break;
++
++ default :
++ clk_src[CLKC_ADSLSS] = 0;
++
++ }
++
++
++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & USB_PLL_SELECT;
++ switch(choice)
++ {
++ case USB_SYSPLL_SELECT:
++ clk_src[CLKC_USB] = &sys_pll_out ;
++ break;
++
++ case USB_REFCLKI_SELECT:
++ clk_src[CLKC_USB] = &refclk_inp;
++ break;
++
++ case USB_XTAL3IN_SELECT:
++ clk_src[CLKC_USB] = &xtal_inp;
++ break;
++
++ case USB_MIPSPLL_SELECT:
++ clk_src[CLKC_USB] = &mips_pll_out;
++ break;
++
++ default :
++ clk_src[CLKC_USB] = 0;
++
++ }
++}
++
++
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_clkc_set_freq
++ ****************************************************************************
++ * Description: The above routine is called to set the output_frequency of the
++ * selected clock(using clk_id) to the required value given
++ * by the variable output_freq.
++ ***************************************************************************/
++TNETD73XX_ERR tnetd73xx_clkc_set_freq
++(
++ TNETD73XX_CLKC_ID_T clk_id,
++ u32 output_freq
++ )
++{
++ u32 base_freq;
++ u32 multiplier;
++ u32 divider;
++ u32 min_prediv;
++ u32 max_prediv;
++ u32 prediv;
++ u32 postdiv;
++ u32 temp;
++
++ /* check if PLLs are bypassed*/
++ if(REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++
++ /*check if the requested output_frequency is in valid range*/
++ switch( clk_id )
++ {
++ case CLKC_SYS:
++ if( output_freq < SYS_MIN || output_freq > SYS_MAX)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++ present_min = SYS_MIN;
++ present_max = SYS_MAX;
++ break;
++
++ case CLKC_MIPS:
++ if((output_freq < MIPS_MIN) ||
++ (output_freq > ((REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX)))
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++ present_min = MIPS_MIN;
++ present_max = (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX;
++ break;
++
++ case CLKC_USB:
++ if( output_freq < USB_MIN || output_freq > USB_MAX)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++ present_min = USB_MIN;
++ present_max = USB_MAX;
++ break;
++
++ case CLKC_ADSLSS:
++ if( output_freq < ADSL_MIN || output_freq > ADSL_MAX)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++ present_min = ADSL_MIN;
++ present_max = ADSL_MAX;
++ break;
++ }
++
++
++ base_freq = get_base_frequency(clk_id);
++
++
++ /* check for minimum base frequency value */
++ if( base_freq < MIN_PLL_INP_FREQ)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++
++ get_val(output_freq, base_freq, &multiplier, ÷r);
++
++ /* check multiplier range */
++ if( (multiplier > PLL_MUL_MAXFACTOR) || (multiplier <= 0) )
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++
++ /* check divider value */
++ if( divider == 0 )
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++
++ /*compute minimum and maximum predivider values */
++ min_prediv = MAX(base_freq / MAX_PLL_INP_FREQ + 1, divider / MAX_DIV_VALUE + 1);
++ max_prediv = MIN(base_freq / MIN_PLL_INP_FREQ, MAX_DIV_VALUE);
++
++ /*adjust the value of divider so that it not less than minimum predivider value*/
++ if (divider < min_prediv)
++ {
++ temp = CEIL(min_prediv, divider);
++ if ((temp * multiplier) > PLL_MUL_MAXFACTOR)
++ {
++ return TNETD73XX_ERR_ERROR ;
++ }
++ else
++ {
++ multiplier = temp * multiplier;
++ divider = min_prediv;
++ }
++
++ }
++
++ /* compute predivider and postdivider values */
++ prediv = compute_prediv (divider, min_prediv, max_prediv);
++ postdiv = CEIL(divider,prediv);
++
++ /*return fail if postdivider value falls out of range */
++ if(postdiv > MAX_DIV_VALUE)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++
++
++ /*write predivider and postdivider values*/
++ /* pre-Divider and post-divider are 5 bit N+1 dividers */
++ REG32_WRITE(CLKC_CLKCR(clk_id), ((postdiv -1) & 0x1F) << 16 | ((prediv -1) & 0x1F) );
++
++ /*wait for divider output to stabilise*/
++ for(temp =0; temp < DIVIDER_LOCK_TIME; temp++);
++
++ /*write to PLL clock register*/
++
++ if(clk_id == CLKC_SYS)
++ {
++ /* but before writing put DRAM to hold mode */
++ REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) |= 0x80000000;
++ }
++ /*Bring PLL into div mode */
++ REG32_WRITE(CLKC_CLKPLLCR(clk_id), 0x4);
++
++ /*compute the word to be written to PLLCR
++ *corresponding to multiplier value
++ */
++ multiplier = (((multiplier - 1) & 0xf) << 12)| ((255 <<3) | 0x0e);
++
++ /* wait till PLL enters div mode */
++ while(REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS)
++ /*nothing*/;
++
++ REG32_WRITE(CLKC_CLKPLLCR(clk_id), multiplier);
++
++ while(!REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS)
++ /*nothing*/;
++
++
++ /*wait for External pll to lock*/
++ for(temp =0; temp < PLL_LOCK_TIME; temp++);
++
++ if(clk_id == CLKC_SYS)
++ {
++ /* Bring DRAM out of hold */
++ REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) &= ~0x80000000;
++ }
++
++ return TNETD73XX_ERR_OK ;
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_clkc_get_freq
++ ****************************************************************************
++ * Description: The above routine is called to get the output_frequency of the
++ * selected clock( clk_id)
++ ***************************************************************************/
++u32 tnetd73xx_clkc_get_freq
++(
++ TNETD73XX_CLKC_ID_T clk_id
++ )
++{
++
++ u32 clk_ctrl_register;
++ u32 clk_pll_setting;
++ u32 clk_predivider;
++ u32 clk_postdivider;
++ u16 pll_factor;
++ u32 base_freq;
++ u32 divider;
++
++ base_freq = get_base_frequency(clk_id);
++
++ clk_ctrl_register = REG32_DATA(CLKC_CLKCR(clk_id));
++
++ /* pre-Divider and post-divider are 5 bit N+1 dividers */
++ clk_predivider = (CLKC_PRE_DIVIDER & clk_ctrl_register) + 1;
++ clk_postdivider = ((CLKC_POST_DIVIDER & clk_ctrl_register) >> 16) + 1;
++
++ divider = clk_predivider * clk_postdivider;
++
++
++ if( (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS))
++ {
++ return (CEIL(base_freq, divider)); /* PLLs bypassed.*/
++ }
++
++
++ else
++ {
++ /* return the current clock speed based upon the PLL setting */
++ clk_pll_setting = REG32_DATA(CLKC_CLKPLLCR(clk_id));
++
++ /* Get the PLL multiplication factor */
++ pll_factor = ((clk_pll_setting & CLKC_PLL_FACTOR) >> 12) + 1;
++
++ /* Check if we're in divide mode or multiply mode */
++ if((clk_pll_setting & 0x1) == 0)
++ {
++ /* We're in divide mode */
++ if(pll_factor < 0x10)
++ return (CEIL(base_freq >> 1, divider));
++ else
++ return (CEIL(base_freq >> 2, divider));
++ }
++
++ else /* We're in PLL mode */
++ {
++ /* See if PLLNDIV & PLLDIV are set */
++ if((clk_pll_setting & 0x0800) && (clk_pll_setting & 0x2))
++ {
++ if(clk_pll_setting & 0x1000)
++ {
++ /* clk = base_freq * k/2 */
++ return(CEIL((base_freq * pll_factor) >> 1, divider));
++ }
++ else
++ {
++ /* clk = base_freq * (k-1) / 4)*/
++ return(CEIL((base_freq * (pll_factor - 1)) >>2, divider));
++ }
++ }
++ else
++ {
++ if(pll_factor < 0x10)
++ {
++ /* clk = base_freq * k */
++ return(CEIL(base_freq * pll_factor, divider));
++ }
++
++ else
++ {
++ /* clk = base_freq */
++ return(CEIL(base_freq, divider));
++ }
++ }
++ }
++ return(0); /* Should never reach here */
++
++ }
++
++}
++
++
++/* local helper functions */
++
++/****************************************************************************
++ * FUNCTION: get_base_frequency
++ ****************************************************************************
++ * Description: The above routine is called to get base frequency of the clocks.
++ ***************************************************************************/
++
++static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id)
++{
++ /* update the current MIPs PLL output value, if the required
++ * source is MIPS PLL
++ */
++ if ( clk_src[clk_id] == &mips_pll_out)
++ {
++ *clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_MIPS);
++ }
++
++
++ /* update the current System PLL output value, if the required
++ * source is system PLL
++ */
++ if ( clk_src[clk_id] == &sys_pll_out)
++ {
++ *clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_SYS);
++ }
++
++ return (*clk_src[clk_id]);
++
++}
++
++
++
++/****************************************************************************
++ * FUNCTION: find_gcd
++ ****************************************************************************
++ * Description: The above routine is called to find gcd of 2 numbers.
++ ***************************************************************************/
++static u32 find_gcd
++(
++ u32 min,
++ u32 max
++ )
++{
++ if (max % min == 0)
++ {
++ return min;
++ }
++ else
++ {
++ return find_gcd(max % min, min);
++ }
++}
++
++/****************************************************************************
++ * FUNCTION: compute_prediv
++ ****************************************************************************
++ * Description: The above routine is called to compute predivider value
++ ***************************************************************************/
++static u32 compute_prediv(u32 divider, u32 min, u32 max)
++{
++ u16 prediv;
++
++ /* return the divider itself it it falls within the range of predivider*/
++ if (min <= divider && divider <= max)
++ {
++ return divider;
++ }
++
++ /* find a value for prediv such that it is a factor of divider */
++ for (prediv = max; prediv >= min ; prediv--)
++ {
++ if ( (divider % prediv) == 0 )
++ {
++ return prediv;
++ }
++ }
++
++ /* No such factor exists, return min as prediv */
++ return min;
++}
++
++/****************************************************************************
++ * FUNCTION: get_val
++ ****************************************************************************
++ * Description: This routine is called to get values of divider and multiplier.
++ ***************************************************************************/
++
++static void get_val(u32 output_freq, u32 base_freq,u32 *multiplier, u32 *divider)
++{
++ u32 temp_mul;
++ u32 temp_div;
++ u32 gcd;
++ u32 min_freq;
++ u32 max_freq;
++
++ /* find gcd of base_freq, output_freq */
++ min_freq = (base_freq < output_freq) ? base_freq : output_freq;
++ max_freq = (base_freq > output_freq) ? base_freq : output_freq;
++ gcd = find_gcd(min_freq , max_freq);
++
++ if(gcd == 0)
++ return; /* ERROR */
++
++ /* compute values of multiplier and divider */
++ temp_mul = output_freq / gcd;
++ temp_div = base_freq / gcd;
++
++
++ /* set multiplier such that 1 <= multiplier <= PLL_MUL_MAXFACTOR */
++ if( temp_mul > PLL_MUL_MAXFACTOR )
++ {
++ if((temp_mul / temp_div) > PLL_MUL_MAXFACTOR)
++ return;
++
++ find_approx(&temp_mul,&temp_div,base_freq);
++ }
++
++ *multiplier = temp_mul;
++ *divider = temp_div;
++}
++
++/****************************************************************************
++ * FUNCTION: find_approx
++ ****************************************************************************
++ * Description: This function gets the approx value of num/denom.
++ ***************************************************************************/
++
++static void find_approx(u32 *num,u32 *denom,u32 base_freq)
++{
++ u32 num1;
++ u32 denom1;
++ u32 num2;
++ u32 denom2;
++ int32_t closest;
++ int32_t prev_closest;
++ u32 temp_num;
++ u32 temp_denom;
++ u32 normalize;
++ u32 gcd;
++ u32 output_freq;
++
++ num1 = *num;
++ denom1 = *denom;
++
++ prev_closest = 0x7fffffff; /* maximum possible value */
++ num2 = num1;
++ denom2 = denom1;
++
++ /* start with max */
++ for(temp_num = 15; temp_num >=1; temp_num--)
++ {
++
++ temp_denom = CEIL(temp_num * denom1, num1);
++ output_freq = (temp_num * base_freq) / temp_denom;
++
++ if(temp_denom < 1)
++ {
++ break;
++ }
++ else
++ {
++ normalize = CEIL(num1,temp_num);
++ closest = (ABS((num1 * (temp_denom) ) - (temp_num * denom1))) * normalize;
++ if(closest < prev_closest && output_freq > present_min && output_freq <present_max)
++ {
++ prev_closest = closest;
++ num2 = temp_num;
++ denom2 = temp_denom;
++ }
++
++ }
++
++ }
++
++ gcd = find_gcd(num2,denom2);
++ num2 = num2 / gcd;
++ denom2 = denom2 /gcd;
++
++ *num = num2;
++ *denom = denom2;
++}
++
++
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_init
++ ***************************************************************************/
++void tnetd73xx_gpio_init()
++{
++ /* Bring module out of reset */
++ tnetd73xx_reset_ctrl(RESET_MODULE_GPIO, OUT_OF_RESET);
++ REG32_WRITE(TNETD73XX_GPIOENR, 0xFFFFFFFF);
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_ctrl
++ ***************************************************************************/
++void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin,
++ TNETD73XX_GPIO_PIN_MODE_T pin_mode,
++ TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction)
++{
++ u32 pin_status;
++ REG32_READ(TNETD73XX_GPIOENR, pin_status);
++ if (pin_mode == GPIO_PIN)
++ {
++ pin_status |= (1 << gpio_pin);
++ REG32_WRITE(TNETD73XX_GPIOENR, pin_status);
++
++ /* Set pin direction */
++ REG32_READ(TNETD73XX_GPIOPDIRR, pin_status);
++ if (pin_direction == GPIO_INPUT_PIN)
++ {
++ pin_status |= (1 << gpio_pin);
++ }
++ else /* GPIO_OUTPUT_PIN */
++ {
++ pin_status &= (~(1 << gpio_pin));
++ }
++ REG32_WRITE(TNETD73XX_GPIOPDIRR, pin_status);
++ }
++ else /* FUNCTIONAL PIN */
++ {
++ pin_status &= (~(1 << gpio_pin));
++ REG32_WRITE(TNETD73XX_GPIOENR, pin_status);
++ }
++
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_out
++ ***************************************************************************/
++void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value)
++{
++ u32 pin_value;
++
++ REG32_READ(TNETD73XX_GPIODOUTR, pin_value);
++ if (value == 1)
++ {
++ pin_value |= (1 << gpio_pin);
++ }
++ else
++ {
++ pin_value &= (~(1 << gpio_pin));
++ }
++ REG32_WRITE(TNETD73XX_GPIODOUTR, pin_value);
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_in
++ ***************************************************************************/
++int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin)
++{
++ u32 pin_value;
++ REG32_READ(TNETD73XX_GPIODINR, pin_value);
++ return ( (pin_value & (1 << gpio_pin)) ? 1 : 0 );
++}
++
+diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in
+--- linux.old/arch/mips/config-shared.in 2005-10-21 16:43:18.917114000 +0200
++++ linux.dev/arch/mips/config-shared.in 2005-11-10 01:12:43.950955750 +0100
+@@ -20,6 +20,16 @@
+ mainmenu_option next_comment
+ comment 'Machine selection'
+ dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL
++dep_bool 'Support for Texas Instruments AR7 (EXPERIMENTAL)' CONFIG_AR7 $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL
++if [ "$CONFIG_AR7" = "y" ]; then
++ choice 'Texas Instruments Reference Platform' \
++ "AR7DB CONFIG_AR7DB \
++ AR7RD CONFIG_AR7RD \
++ AR7WRD CONFIG_AR7WRD" AR7DB
++ int 'Texas Instruments AR7 CPU Frequency' CONFIG_AR7_CPU 150
++ int 'Texas Instruments AR7 System Frequency' CONFIG_AR7_SYS 125
++ hex 'Texas Instruments AR7 SDRAM Start' CONFIG_AR7_MEMORY 0x14000000
++fi
+ dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32
+ dep_bool 'Support for FIC Multimedia Player board' CONFIG_MIPS_FICMMP $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy Mirage board' CONFIG_MIPS_MIRAGE $CONFIG_MIPS32
+@@ -239,6 +249,11 @@
+ define_bool CONFIG_NONCOHERENT_IO y
+ define_bool CONFIG_PC_KEYB y
+ fi
++if [ "$CONFIG_AR7" = "y" ]; then
++ define_bool CONFIG_IRQ_CPU y
++ define_bool CONFIG_NONCOHERENT_IO y
++ define_bool CONFIG_SWAP_IO_SPACE y
++fi
+ if [ "$CONFIG_CASIO_E55" = "y" ]; then
+ define_bool CONFIG_IRQ_CPU y
+ define_bool CONFIG_NONCOHERENT_IO y
+@@ -736,6 +751,7 @@
+ mainmenu_option next_comment
+ comment 'General setup'
+ if [ "$CONFIG_ACER_PICA_61" = "y" -o \
++ "$CONFIG_AR7" = "y" -o \
+ "$CONFIG_CASIO_E55" = "y" -o \
+ "$CONFIG_DDB5074" = "y" -o \
+ "$CONFIG_DDB5476" = "y" -o \
+@@ -797,6 +813,7 @@
+ bool 'Networking support' CONFIG_NET
+
+ if [ "$CONFIG_ACER_PICA_61" = "y" -o \
++ "$CONFIG_AR7" = "y" -o \
+ "$CONFIG_CASIO_E55" = "y" -o \
+ "$CONFIG_DECSTATION" = "y" -o \
+ "$CONFIG_IBM_WORKPAD" = "y" -o \
+diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
+--- linux.old/arch/mips/kernel/head.S 2005-10-21 16:43:16.396956500 +0200
++++ linux.dev/arch/mips/kernel/head.S 2005-11-10 01:10:45.807572250 +0100
+@@ -75,11 +75,11 @@
+ * size!
+ */
+ NESTED(except_vec4, 0, sp)
+- .set push
+- .set noreorder
+-1: j 1b /* Dummy, will be replaced */
+- nop
+- .set pop
++ .set mips2
++ lui k0, 0x9400
++ ori k0, 0x200
++ jr k0
++ nop
+ END(except_vec4)
+
+ /*
+diff -urN linux.old/arch/mips/kernel/mips_ksyms.c linux.dev/arch/mips/kernel/mips_ksyms.c
+--- linux.old/arch/mips/kernel/mips_ksyms.c 2004-02-18 14:36:30.000000000 +0100
++++ linux.dev/arch/mips/kernel/mips_ksyms.c 2005-11-10 01:10:45.811572500 +0100
+@@ -40,6 +40,12 @@
+ extern long __strnlen_user_nocheck_asm(const char *s);
+ extern long __strnlen_user_asm(const char *s);
+
++#ifdef CONFIG_AR7
++#include <asm/ar7/adam2_env.h>
++int avalanche_request_pacing(int irq_nr, unsigned int blk_num, unsigned int pace_value);
++#endif
++
++
+ EXPORT_SYMBOL(mips_machtype);
+ #ifdef CONFIG_EISA
+ EXPORT_SYMBOL(EISA_bus);
+@@ -103,3 +109,10 @@
+ #endif
+
+ EXPORT_SYMBOL(get_wchan);
++
++#ifdef CONFIG_AR7
++EXPORT_SYMBOL_NOVERS(avalanche_request_pacing);
++EXPORT_SYMBOL_NOVERS(prom_getenv);
++EXPORT_SYMBOL_NOVERS(prom_iterenv);
++#endif
++
+diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c
+--- linux.old/arch/mips/kernel/setup.c 2005-10-21 16:43:16.396956500 +0200
++++ linux.dev/arch/mips/kernel/setup.c 2005-11-10 01:14:16.376732000 +0100
+@@ -38,6 +38,7 @@
+ #include <asm/io.h>
+ #include <asm/ptrace.h>
+ #include <asm/system.h>
++#include <asm/addrspace.h>
+
+ struct cpuinfo_mips cpu_data[NR_CPUS];
+ EXPORT_SYMBOL(cpu_data);
+@@ -88,7 +89,7 @@
+ struct boot_mem_map boot_mem_map;
+
+ unsigned char aux_device_present;
+-extern char _ftext, _etext, _fdata, _edata, _end;
++extern char _ftext, _etext, _fdata, _edata, _fbss, _end;
+
+ static char command_line[CL_SIZE];
+ char saved_command_line[CL_SIZE];
+@@ -116,6 +117,7 @@
+
+ static struct resource code_resource = { "Kernel code" };
+ static struct resource data_resource = { "Kernel data" };
++static struct resource bss_resource = { "Kernel bss" };
+
+ asmlinkage void __init
+ init_arch(int argc, char **argv, char **envp, int *prom_vec)
+@@ -272,7 +274,7 @@
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ unsigned long start, end;
+
+- if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
++ if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED)
+ continue;
+
+ start = PFN_UP(boot_mem_map.map[i].addr);
+@@ -320,7 +322,8 @@
+ #endif
+
+ /* Initialize the boot-time allocator with low memory only. */
+- bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
++ bootmap_size = init_bootmem_node(NODE_DATA(0), first_usable_pfn,
++ PFN_UP(PHYS_OFFSET), max_low_pfn);
+
+ /*
+ * Register fully available low RAM pages with the bootmem allocator.
+@@ -371,11 +374,12 @@
+ continue;
+
+ /* Register lowmem ranges */
+- free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
++ free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
++ size<<PAGE_SHIFT);
+ }
+
+ /* Reserve the bootmap memory. */
+- reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
++ reserve_bootmem_node(NODE_DATA(0), PFN_PHYS(first_usable_pfn), bootmap_size);
+
+ #ifdef CONFIG_BLK_DEV_INITRD
+ /* Board specific code should have set up initrd_start and initrd_end */
+@@ -409,6 +413,8 @@
+ code_resource.end = virt_to_bus(&_etext) - 1;
+ data_resource.start = virt_to_bus(&_fdata);
+ data_resource.end = virt_to_bus(&_edata) - 1;
++ bss_resource.start = virt_to_bus(&_fbss);
++ bss_resource.end = virt_to_bus(&_end) - 1;
+
+ /*
+ * Request address space for all standard RAM.
+@@ -448,6 +454,7 @@
+ */
+ request_resource(res, &code_resource);
+ request_resource(res, &data_resource);
++ request_resource(res, &bss_resource);
+ }
+ }
+
+@@ -494,6 +501,7 @@
+ void hp_setup(void);
+ void au1x00_setup(void);
+ void frame_info_init(void);
++ void ar7_setup(void);
+
+ frame_info_init();
+ #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
+@@ -691,6 +699,11 @@
+ pmc_yosemite_setup();
+ break;
+ #endif
++#ifdef CONFIG_AR7
++ case MACH_GROUP_UNKNOWN:
++ ar7_setup();
++ break;
++#endif
+ default:
+ panic("Unsupported architecture");
+ }
+diff -urN linux.old/arch/mips/kernel/time.c linux.dev/arch/mips/kernel/time.c
+--- linux.old/arch/mips/kernel/time.c 2005-01-19 15:09:29.000000000 +0100
++++ linux.dev/arch/mips/kernel/time.c 2005-11-10 01:12:43.950955750 +0100
+@@ -143,7 +143,6 @@
+ expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
+ write_c0_count(expirelo - cycles_per_jiffy);
+ write_c0_compare(expirelo);
+- write_c0_count(count);
+ }
+
+ int (*mips_timer_state)(void);
+diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c
+--- linux.old/arch/mips/kernel/traps.c 2005-10-21 16:43:16.400956750 +0200
++++ linux.dev/arch/mips/kernel/traps.c 2005-11-10 01:13:28.301727500 +0100
+@@ -869,9 +869,24 @@
+
+ exception_handlers[n] = handler;
+ if (n == 0 && cpu_has_divec) {
++ printk(KERN_DEBUG "%s: using long jump via k0 to reach %08x\n",
++ __FUNCTION__, handler);
++ /* where does the 8 byte limit mentioned in head.S come from??? */
++ if (handler > 0x0fffffff) { /* maximum for single J instruction */
++ /* lui k0, 0x0000 */
++ *(volatile u32 *)(KSEG0+0x200) = 0x3c1a0000 | (handler >> 16);
++ /* ori k0, 0x0000 */
++ *(volatile u32 *)(KSEG0+0x204) = 0x375a0000 | (handler & 0xffff);
++ /* jr k0 */
++ *(volatile u32 *)(KSEG0+0x208) = 0x03400008;
++ /* nop */
++ *(volatile u32 *)(KSEG0+0x20C) = 0x00000000;
++ flush_icache_range(KSEG0+0x200, KSEG0+0x210);
++ } else {
+ *(volatile u32 *)(KSEG0+0x200) = 0x08000000 |
+ (0x03ffffff & (handler >> 2));
+- flush_icache_range(KSEG0+0x200, KSEG0 + 0x204);
++ flush_icache_range(KSEG0+0x200, KSEG0+0x204);
++ }
+ }
+ return (void *)old_handler;
+ }
+diff -urN linux.old/arch/mips/mm/init.c linux.dev/arch/mips/mm/init.c
+--- linux.old/arch/mips/mm/init.c 2004-02-18 14:36:30.000000000 +0100
++++ linux.dev/arch/mips/mm/init.c 2005-11-10 01:14:16.376732000 +0100
+@@ -235,10 +235,13 @@
+ #endif
+ }
+
++#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
++#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
++
+ void __init paging_init(void)
+ {
+ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+- unsigned long max_dma, high, low;
++ unsigned long max_dma, high, low, start;
+
+ pagetable_init();
+
+@@ -247,7 +250,8 @@
+ #endif
+
+ max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+- low = max_low_pfn;
++ start = START_PFN;
++ low = MAX_LOW_PFN - start;
+ high = highend_pfn;
+
+ #ifdef CONFIG_ISA
+@@ -270,7 +274,8 @@
+ zones_size[ZONE_HIGHMEM] = high - low;
+ #endif
+
+- free_area_init(zones_size);
++ free_area_init_node(0, NODE_DATA(0), 0, zones_size,
++ start << PAGE_SHIFT, 0);
+ }
+
+ #define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
+@@ -283,7 +288,7 @@
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ unsigned long addr, end;
+
+- if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
++ if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED)
+ /* not usable memory */
+ continue;
+
+@@ -313,16 +318,17 @@
+ max_mapnr = num_physpages = highend_pfn;
+ num_mappedpages = max_low_pfn;
+ #else
+- max_mapnr = num_mappedpages = num_physpages = max_low_pfn;
++ max_mapnr = num_mappedpages = num_physpages = MAX_LOW_PFN - START_PFN;
+ #endif
+- high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
+-
+- totalram_pages += free_all_bootmem();
++
++ high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE);
++
++ totalram_pages += free_all_bootmem_node(NODE_DATA(0));
+ totalram_pages -= setup_zero_pages(); /* Setup zeroed pages. */
+
+ reservedpages = ram = 0;
+- for (tmp = 0; tmp < max_low_pfn; tmp++)
+- if (page_is_ram(tmp)) {
++ for (tmp = 0; tmp < max_mapnr; tmp++)
++ if (page_is_ram(START_PFN + tmp)) {
+ ram++;
+ if (PageReserved(mem_map+tmp))
+ reservedpages++;
+@@ -377,13 +383,13 @@
+ #endif
+
+ extern char __init_begin, __init_end;
+-extern void prom_free_prom_memory(void) __init;
++extern unsigned long prom_free_prom_memory(void) __init;
+
+ void free_initmem(void)
+ {
+ unsigned long addr;
+
+- prom_free_prom_memory ();
++ totalram_pages += prom_free_prom_memory ();
+
+ addr = (unsigned long) &__init_begin;
+ while (addr < (unsigned long) &__init_end) {
+diff -urN linux.old/drivers/char/Config.in linux.dev/drivers/char/Config.in
+--- linux.old/drivers/char/Config.in 2005-10-21 16:43:16.440959250 +0200
++++ linux.dev/drivers/char/Config.in 2005-11-10 01:10:45.843574500 +0100
+@@ -188,6 +188,14 @@
+ tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
+ fi
+
++if [ "$CONFIG_AR7" = "y" ]; then
++ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ
++ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ
++
++ define_int CONFIG_AR7_VLYNQ_PORTS 2
++ tristate 'ADAM2 environment support (read-only)' CONFIG_AR7_ADAM2
++fi
++
+ source drivers/i2c/Config.in
+
+ mainmenu_option next_comment
+diff -urN linux.old/drivers/char/Config.in.orig linux.dev/drivers/char/Config.in.orig
+--- linux.old/drivers/char/Config.in.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/Config.in.orig 2005-11-10 01:10:45.863575750 +0100
+@@ -0,0 +1,414 @@
++#
++# Character device configuration
++#
++mainmenu_option next_comment
++comment 'Character devices'
++
++bool 'Virtual terminal' CONFIG_VT
++if [ "$CONFIG_VT" = "y" ]; then
++ bool ' Support for console on virtual terminal' CONFIG_VT_CONSOLE
++ if [ "$CONFIG_GSC_LASI" = "y" ]; then
++ bool ' Support for Lasi/Dino PS2 port' CONFIG_GSC_PS2
++ fi
++fi
++tristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIAL
++if [ "$CONFIG_SERIAL" = "y" ]; then
++ bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE
++ if [ "$CONFIG_GSC_LASI" = "y" ]; then
++ bool ' serial port on GSC support' CONFIG_SERIAL_GSC
++ fi
++ if [ "$CONFIG_IA64" = "y" ]; then
++ bool ' Support for serial port described by EFI HCDP table' CONFIG_SERIAL_HCDP
++ fi
++ if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
++ tristate ' Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL
++ tristate ' Dual serial port support' CONFIG_DUALSP_SERIAL
++ fi
++fi
++dep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIAL
++if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
++ bool ' Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
++ bool ' Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
++ bool ' Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ
++ bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT
++ bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6
++fi
++bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
++if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
++ tristate ' Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
++ tristate ' Comtrol Rocketport support' CONFIG_ROCKETPORT
++ tristate ' Cyclades async mux support' CONFIG_CYCLADES
++ if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then
++ bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
++ fi
++ if [ "$CONFIG_X86_64" != "y" ]; then
++ tristate ' Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
++ if [ "$CONFIG_DIGIEPCA" = "n" ]; then
++ tristate ' Digiboard PC/Xx Support' CONFIG_DIGI
++ fi
++ fi
++ dep_tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL $CONFIG_ISA
++ tristate ' Moxa Intellio support' CONFIG_MOXA_INTELLIO
++ tristate ' Moxa SmartIO support' CONFIG_MOXA_SMARTIO
++ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
++ dep_tristate ' Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m
++ fi
++ tristate ' Microgate SyncLink card support' CONFIG_SYNCLINK
++ tristate ' SyncLink Multiport support' CONFIG_SYNCLINKMP
++ tristate ' HDLC line discipline support' CONFIG_N_HDLC
++ tristate ' SDL RISCom/8 card support' CONFIG_RISCOM8
++ if [ "$CONFIG_X86_64" != "y" ]; then
++ tristate ' Specialix IO8+ card support' CONFIG_SPECIALIX
++ if [ "$CONFIG_SPECIALIX" != "n" ]; then
++ bool ' Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
++ fi
++ tristate ' Specialix SX (and SI) card support' CONFIG_SX
++ tristate ' Specialix RIO system support' CONFIG_RIO
++ if [ "$CONFIG_RIO" != "n" ]; then
++ bool ' Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI
++ fi
++ fi
++ bool ' Stallion multiport serial support' CONFIG_STALDRV
++ if [ "$CONFIG_STALDRV" = "y" ]; then
++ tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION
++ tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
++ fi
++ if [ "$CONFIG_PARISC" = "y" ]; then
++ if [ "$CONFIG_PDC_CONSOLE" != "y" ]; then
++ bool ' Serial MUX support' CONFIG_SERIAL_MUX CONFIG_SERIAL_NONSTANDARD
++ fi
++ if [ "$CONFIG_SERIAL_MUX" != "y" ]; then
++ bool ' PDC software console support' CONFIG_PDC_CONSOLE CONFIG_SERIAL_NONSTANDARD
++ fi
++ fi
++ if [ "$CONFIG_MIPS" = "y" ]; then
++ bool ' TX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912
++ dep_bool ' Console on TX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912
++ bool ' TMPTX39XX/49XX serial port support' CONFIG_SERIAL_TXX9
++ dep_bool ' Console on TMPTX39XX/49XX serial port' CONFIG_SERIAL_TXX9_CONSOLE $CONFIG_SERIAL_TXX9
++ if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
++ bool ' Enable Au1x00 UART Support' CONFIG_AU1X00_UART
++ if [ "$CONFIG_AU1X00_UART" = "y" ]; then
++ bool ' Enable Au1x00 serial console' CONFIG_AU1X00_SERIAL_CONSOLE
++ fi
++ dep_tristate ' Au1x00 USB TTY Device support' CONFIG_AU1X00_USB_TTY $CONFIG_SOC_AU1X00
++ if [ "$CONFIG_AU1000_USB_TTY" != "y" ]; then
++ dep_tristate ' Au1x00 USB Raw Device support' CONFIG_AU1X00_USB_RAW $CONFIG_SOC_AU1X00
++ fi
++ if [ "$CONFIG_AU1X00_USB_TTY" != "n" -o \
++ "$CONFIG_AU1X00_USB_RAW" != "n" ]; then
++ define_bool CONFIG_AU1X00_USB_DEVICE y
++ fi
++ fi
++ bool ' TXx927 SIO support' CONFIG_TXX927_SERIAL
++ if [ "$CONFIG_TXX927_SERIAL" = "y" ]; then
++ bool ' TXx927 SIO Console support' CONFIG_TXX927_SERIAL_CONSOLE
++ fi
++ if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
++ bool ' Support for BCM1xxx onchip DUART' CONFIG_SIBYTE_SB1250_DUART
++ if [ "$CONFIG_SIBYTE_SB1250_DUART" = "y" ]; then
++ bool ' Console on BCM1xxx DUART' CONFIG_SIBYTE_SB1250_DUART_CONSOLE
++ if [ "$CONFIG_SIBYTE_SB1250_DUART_CONSOLE" = "y" ]; then
++ define_bool CONFIG_SERIAL_CONSOLE y
++ fi
++ fi
++ fi
++ fi
++ if [ "$CONFIG_DECSTATION" = "y" ]; then
++ bool ' DECstation serial support' CONFIG_SERIAL_DEC
++ dep_bool ' Support for console on a DECstation serial port' CONFIG_SERIAL_DEC_CONSOLE $CONFIG_SERIAL_DEC
++ dep_bool ' DZ11 serial support' CONFIG_DZ $CONFIG_SERIAL_DEC $CONFIG_MIPS32
++ dep_bool ' Z85C30 serial support' CONFIG_ZS $CONFIG_SERIAL_DEC $CONFIG_TC
++ fi
++ if [ "$CONFIG_SGI_IP22" = "y" ]; then
++ bool ' SGI Zilog85C30 serial support' CONFIG_IP22_SERIAL
++ fi
++ if [ "$CONFIG_IA64" = "y" ]; then
++ bool ' SGI SN2 l1 serial port support' CONFIG_SGI_L1_SERIAL
++ if [ "$CONFIG_SGI_L1_SERIAL" = "y" ]; then
++ bool ' SGI SN2 l1 Console support' CONFIG_SGI_L1_SERIAL_CONSOLE
++ fi
++ if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ]; then
++ bool ' SGI SN2 IOC4 serial port support' CONFIG_SGI_IOC4_SERIAL
++ fi
++ fi
++fi
++if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then
++ tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
++fi
++if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
++ bool 'DC21285 serial port support' CONFIG_SERIAL_21285
++ if [ "$CONFIG_SERIAL_21285" = "y" ]; then
++ if [ "$CONFIG_OBSOLETE" = "y" ]; then
++ bool ' Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD
++ fi
++ bool ' Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE
++ fi
++ if [ "$CONFIG_PARISC" = "y" ]; then
++ bool ' PDC software console support' CONFIG_PDC_CONSOLE
++ fi
++fi
++if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
++ bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
++ if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
++ define_bool CONFIG_IT8172_CIR y
++ else
++ bool ' Enable PS2 Keyboard Support' CONFIG_PC_KEYB
++ fi
++ bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
++ bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1
++fi
++if [ "$CONFIG_MIPS_IVR" = "y" ]; then
++ bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
++ if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
++ define_bool CONFIG_IT8172_CIR y
++ fi
++ bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
++fi
++if [ "$CONFIG_CPU_VR41XX" = "y" ]; then
++ bool 'NEC VR4100 series Keyboard Interface Unit Support ' CONFIG_VR41XX_KIU
++fi
++bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
++if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
++ int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
++fi
++if [ "$CONFIG_PARPORT" != "n" ]; then
++ dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
++ if [ "$CONFIG_PRINTER" != "n" ]; then
++ bool ' Support for console on line printer' CONFIG_LP_CONSOLE
++ fi
++ dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT
++ dep_tristate 'Texas Instruments parallel link cable support' CONFIG_TIPAR $CONFIG_PARPORT
++fi
++
++if [ "$CONFIG_PPC64" = "y" ] ; then
++ bool 'pSeries Hypervisor Virtual Console support' CONFIG_HVC_CONSOLE
++fi
++if [ "$CONFIG_ALL_PPC" = "y" ]; then
++ tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
++fi
++
++if [ "$CONFIG_AR7" = "y" ]; then
++ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ
++ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ
++
++ define_int CONFIG_AR7_VLYNQ_PORTS 2
++fi
++
++source drivers/i2c/Config.in
++
++mainmenu_option next_comment
++comment 'Mice'
++tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
++if [ "$CONFIG_BUSMOUSE" != "n" ]; then
++ dep_tristate ' ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
++ dep_tristate ' Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
++ dep_tristate ' Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
++ if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then
++ dep_tristate ' Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
++ fi
++# if [ "$CONFIG_DECSTATION" = "y" ]; then
++# dep_bool ' MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS
++# fi
++fi
++
++tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
++if [ "$CONFIG_MOUSE" != "n" ]; then
++ bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
++ tristate ' C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
++ tristate ' PC110 digitizer pad support' CONFIG_PC110_PAD
++ tristate ' MK712 touch screen support' CONFIG_MK712_MOUSE
++fi
++endmenu
++
++source drivers/char/joystick/Config.in
++
++tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
++if [ "$CONFIG_QIC02_TAPE" != "n" ]; then
++ bool ' Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF
++ if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
++ comment ' Edit configuration parameters in ./include/linux/tpqic02.h!'
++ else
++ comment ' Setting runtime QIC-02 configuration is done with qic02conf'
++ comment ' from the tpqic02-support package. It is available at'
++ comment ' metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'
++ fi
++fi
++
++tristate 'IPMI top-level message handler' CONFIG_IPMI_HANDLER
++dep_mbool ' Generate a panic event to all BMCs on a panic' CONFIG_IPMI_PANIC_EVENT $CONFIG_IPMI_HANDLER
++dep_tristate ' Device interface for IPMI' CONFIG_IPMI_DEVICE_INTERFACE $CONFIG_IPMI_HANDLER
++dep_tristate ' IPMI KCS handler' CONFIG_IPMI_KCS $CONFIG_IPMI_HANDLER
++dep_tristate ' IPMI Watchdog Timer' CONFIG_IPMI_WATCHDOG $CONFIG_IPMI_HANDLER
++
++mainmenu_option next_comment
++comment 'Watchdog Cards'
++bool 'Watchdog Timer Support' CONFIG_WATCHDOG
++if [ "$CONFIG_WATCHDOG" != "n" ]; then
++ bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
++ tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
++ tristate ' Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT
++ tristate ' ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT
++ tristate ' ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT
++ tristate ' AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT
++ tristate ' Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
++ if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
++ tristate ' DC21285 watchdog' CONFIG_21285_WATCHDOG
++ if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
++ tristate ' NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG
++ fi
++ fi
++ tristate ' Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT
++ tristate ' IB700 SBC Watchdog Timer' CONFIG_IB700_WDT
++ tristate ' ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT
++ tristate ' Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO
++ tristate ' Mixcom Watchdog' CONFIG_MIXCOMWD
++ tristate ' SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
++ dep_tristate ' SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL
++ tristate ' NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT
++ tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG
++ tristate ' W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT
++ tristate ' WDT Watchdog timer' CONFIG_WDT
++ tristate ' WDT PCI Watchdog timer' CONFIG_WDTPCI
++ if [ "$CONFIG_WDT" != "n" ]; then
++ bool ' WDT501 features' CONFIG_WDT_501
++ if [ "$CONFIG_WDT_501" = "y" ]; then
++ bool ' Fan Tachometer' CONFIG_WDT_501_FAN
++ fi
++ fi
++ tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT
++ if [ "$CONFIG_SGI_IP22" = "y" ]; then
++ dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
++ fi
++ if [ "$CONFIG_8xx" = "y" ]; then
++ tristate ' MPC8xx Watchdog Timer' CONFIG_8xx_WDT
++ fi
++fi
++endmenu
++
++if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
++ tristate 'NetWinder thermometer support' CONFIG_DS1620
++ tristate 'NetWinder Button' CONFIG_NWBUTTON
++ if [ "$CONFIG_NWBUTTON" != "n" ]; then
++ bool ' Reboot Using Button' CONFIG_NWBUTTON_REBOOT
++ fi
++ tristate 'NetWinder flash support' CONFIG_NWFLASH
++fi
++tristate 'NatSemi SCx200 Support' CONFIG_SCx200
++dep_tristate ' NatSemi SCx200 GPIO Support' CONFIG_SCx200_GPIO $CONFIG_SCx200
++
++if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ] ; then
++ bool 'SGI SN2 fetchop support' CONFIG_FETCHOP
++fi
++
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then
++ dep_tristate 'AMD 768/8111 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI
++fi
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
++ dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI
++fi
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o \
++ "$CONFIG_X86_64" = "y" ]; then
++ dep_tristate 'Intel/AMD/VIA HW Random Number Generator support' CONFIG_HW_RANDOM $CONFIG_PCI
++fi
++dep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCI
++tristate '/dev/nvram support' CONFIG_NVRAM
++tristate 'Enhanced Real Time Clock Support' CONFIG_RTC
++if [ "$CONFIG_IA64" = "y" ]; then
++ bool 'EFI Real Time Clock Services' CONFIG_EFI_RTC
++fi
++if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then
++ bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8
++fi
++if [ "$CONFIG_SGI_IP22" = "y" ]; then
++ tristate 'Dallas DS1286 RTC support' CONFIG_DS1286
++fi
++if [ "$CONFIG_SGI_IP27" = "y" ]; then
++ tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
++fi
++if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
++ tristate 'Dallas DS1742 RTC support' CONFIG_DS1742
++fi
++
++tristate 'Double Talk PC internal speech card support' CONFIG_DTLK
++tristate 'Siemens R3964 line discipline' CONFIG_R3964
++tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM
++if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then
++ dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCI
++fi
++
++mainmenu_option next_comment
++comment 'Ftape, the floppy tape device driver'
++tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE
++if [ "$CONFIG_FTAPE" != "n" ]; then
++ source drivers/char/ftape/Config.in
++fi
++
++endmenu
++
++if [ "$CONFIG_GART_IOMMU" = "y" ]; then
++ bool '/dev/agpgart (AGP Support)' CONFIG_AGP
++ define_bool CONFIG_AGP_AMD_K8 y
++else
++ tristate '/dev/agpgart (AGP Support)' CONFIG_AGP
++fi
++if [ "$CONFIG_AGP" != "n" ]; then
++ bool ' Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL
++ bool ' Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810
++ bool ' VIA chipset support' CONFIG_AGP_VIA
++ bool ' AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD
++ if [ "$CONFIG_GART_IOMMU" != "y" ]; then
++ bool ' AMD Opteron/Athlon64 on-CPU GART support' CONFIG_AGP_AMD_K8
++ fi
++ bool ' Generic SiS support' CONFIG_AGP_SIS
++ bool ' ALI chipset support' CONFIG_AGP_ALI
++ bool ' Serverworks LE/HE support' CONFIG_AGP_SWORKS
++ if [ "$CONFIG_X86" = "y" ]; then
++ bool ' NVIDIA chipset support' CONFIG_AGP_NVIDIA
++ fi
++ if [ "$CONFIG_IA64" = "y" ]; then
++ bool ' Intel 460GX support' CONFIG_AGP_I460
++ bool ' HP ZX1 AGP support' CONFIG_AGP_HP_ZX1
++ fi
++ bool ' ATI IGP chipset support' CONFIG_AGP_ATI
++fi
++
++mainmenu_option next_comment
++comment 'Direct Rendering Manager (XFree86 DRI support)'
++bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM
++if [ "$CONFIG_DRM" = "y" ]; then
++ bool ' Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD
++ if [ "$CONFIG_DRM_OLD" = "y" ]; then
++ comment 'DRM 4.0 drivers'
++ source drivers/char/drm-4.0/Config.in
++ else
++ comment 'DRM 4.1 drivers'
++ define_bool CONFIG_DRM_NEW y
++ source drivers/char/drm/Config.in
++ fi
++fi
++
++if [ "$CONFIG_X86" = "y" ]; then
++ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
++fi
++
++endmenu
++
++if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
++ source drivers/char/pcmcia/Config.in
++fi
++if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
++ tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO
++ tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846
++ #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI
++fi
++if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
++ tristate ' ITE GPIO' CONFIG_ITE_GPIO
++fi
++
++if [ "$CONFIG_X86" = "y" ]; then
++ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
++ dep_tristate 'HP OB600 C/CT Pop-up mouse support' CONFIG_OBMOUSE $CONFIG_INPUT_MOUSEDEV
++fi
++
++endmenu
+diff -urN linux.old/drivers/char/Makefile linux.dev/drivers/char/Makefile
+--- linux.old/drivers/char/Makefile 2005-10-21 16:43:16.460960500 +0200
++++ linux.dev/drivers/char/Makefile 2005-11-10 01:10:45.871576250 +0100
+@@ -240,6 +240,13 @@
+ obj-y += joystick/js.o
+ endif
+
++#
++# Texas Intruments VLYNQ driver
++#
++
++subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq
++obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o
++
+ obj-$(CONFIG_FETCHOP) += fetchop.o
+ obj-$(CONFIG_BUSMOUSE) += busmouse.o
+ obj-$(CONFIG_DTLK) += dtlk.o
+@@ -340,6 +347,11 @@
+ obj-y += ipmi/ipmi.o
+ endif
+
++subdir-$(CONFIG_AR7_ADAM2) += ticfg
++ifeq ($(CONFIG_AR7_ADAM2),y)
++ obj-y += ticfg/ticfg.o
++endif
++
+ include $(TOPDIR)/Rules.make
+
+ fastdep:
+diff -urN linux.old/drivers/char/Makefile.orig linux.dev/drivers/char/Makefile.orig
+--- linux.old/drivers/char/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/Makefile.orig 2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,374 @@
++#
++# Makefile for the kernel character device drivers.
++#
++# Note! Dependencies are done automagically by 'make dep', which also
++# removes any old dependencies. DON'T put your own dependencies here
++# unless it's something special (ie not a .c file).
++#
++# Note 2! The CFLAGS definitions are now inherited from the
++# parent makes..
++#
++
++#
++# This file contains the font map for the default (hardware) font
++#
++FONTMAPFILE = cp437.uni
++
++O_TARGET := char.o
++
++obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o
++
++# All of the (potential) objects that export symbols.
++# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
++
++export-objs := busmouse.o console.o keyboard.o sysrq.o \
++ misc.o pty.o random.o selection.o serial.o \
++ sonypi.o tty_io.o tty_ioctl.o generic_serial.o \
++ au1000_gpio.o vac-serial.o hp_psaux.o nvram.o \
++ scx200.o fetchop.o
++
++mod-subdirs := joystick ftape drm drm-4.0 pcmcia
++
++list-multi :=
++
++KEYMAP =defkeymap.o
++KEYBD =pc_keyb.o
++CONSOLE =console.o
++SERIAL =serial.o
++
++ifeq ($(ARCH),s390)
++ KEYMAP =
++ KEYBD =
++ CONSOLE =
++ SERIAL =
++endif
++
++ifeq ($(ARCH),mips)
++ ifneq ($(CONFIG_PC_KEYB),y)
++ KEYBD =
++ endif
++ ifeq ($(CONFIG_VR41XX_KIU),y)
++ ifeq ($(CONFIG_IBM_WORKPAD),y)
++ KEYMAP = ibm_workpad_keymap.o
++ endif
++ ifeq ($(CONFIG_VICTOR_MPC30X),y)
++ KEYMAP = victor_mpc30x_keymap.o
++ endif
++ KEYBD = vr41xx_keyb.o
++ endif
++endif
++
++ifeq ($(ARCH),s390x)
++ KEYMAP =
++ KEYBD =
++ CONSOLE =
++ SERIAL =
++endif
++
++ifeq ($(ARCH),m68k)
++ ifdef CONFIG_AMIGA
++ KEYBD = amikeyb.o
++ else
++ ifndef CONFIG_MAC
++ KEYBD =
++ endif
++ endif
++ SERIAL =
++endif
++
++ifeq ($(ARCH),parisc)
++ ifdef CONFIG_GSC_PS2
++ KEYBD = hp_psaux.o hp_keyb.o
++ else
++ KEYBD =
++ endif
++ ifdef CONFIG_SERIAL_MUX
++ CONSOLE += mux.o
++ endif
++ ifdef CONFIG_PDC_CONSOLE
++ CONSOLE += pdc_console.o
++ endif
++endif
++
++ifdef CONFIG_Q40
++ KEYBD += q40_keyb.o
++ SERIAL = serial.o
++endif
++
++ifdef CONFIG_APOLLO
++ KEYBD += dn_keyb.o
++endif
++
++ifeq ($(ARCH),parisc)
++ ifdef CONFIG_GSC_PS2
++ KEYBD = hp_psaux.o hp_keyb.o
++ else
++ KEYBD =
++ endif
++ ifdef CONFIG_PDC_CONSOLE
++ CONSOLE += pdc_console.o
++ endif
++endif
++
++ifeq ($(ARCH),arm)
++ ifneq ($(CONFIG_PC_KEYMAP),y)
++ KEYMAP =
++ endif
++ ifneq ($(CONFIG_PC_KEYB),y)
++ KEYBD =
++ endif
++endif
++
++ifeq ($(ARCH),sh)
++ KEYMAP =
++ KEYBD =
++ CONSOLE =
++ ifeq ($(CONFIG_SH_HP600),y)
++ KEYMAP = defkeymap.o
++ KEYBD = scan_keyb.o hp600_keyb.o
++ CONSOLE = console.o
++ endif
++ ifeq ($(CONFIG_SH_DMIDA),y)
++ # DMIDA does not connect the HD64465 PS/2 keyboard port
++ # but we allow for USB keyboards to be plugged in.
++ KEYMAP = defkeymap.o
++ KEYBD = # hd64465_keyb.o pc_keyb.o
++ CONSOLE = console.o
++ endif
++ ifeq ($(CONFIG_SH_EC3104),y)
++ KEYMAP = defkeymap.o
++ KEYBD = ec3104_keyb.o
++ CONSOLE = console.o
++ endif
++ ifeq ($(CONFIG_SH_DREAMCAST),y)
++ KEYMAP = defkeymap.o
++ KEYBD =
++ CONSOLE = console.o
++ endif
++endif
++
++ifeq ($(CONFIG_DECSTATION),y)
++ KEYMAP =
++ KEYBD =
++endif
++
++ifeq ($(CONFIG_BAGET_MIPS),y)
++ KEYBD =
++ SERIAL = vac-serial.o
++endif
++
++ifeq ($(CONFIG_NINO),y)
++ SERIAL =
++endif
++
++ifneq ($(CONFIG_SUN_SERIAL),)
++ SERIAL =
++endif
++
++ifeq ($(CONFIG_QTRONIX_KEYBOARD),y)
++ KEYBD = qtronix.o
++ KEYMAP = qtronixmap.o
++endif
++
++ifeq ($(CONFIG_DUMMY_KEYB),y)
++ KEYBD = dummy_keyb.o
++endif
++
++obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o $(CONSOLE) selection.o
++obj-$(CONFIG_SERIAL) += $(SERIAL)
++obj-$(CONFIG_PARPORT_SERIAL) += parport_serial.o
++obj-$(CONFIG_SERIAL_HCDP) += hcdp_serial.o
++obj-$(CONFIG_SERIAL_21285) += serial_21285.o
++obj-$(CONFIG_SERIAL_SA1100) += serial_sa1100.o
++obj-$(CONFIG_SERIAL_AMBA) += serial_amba.o
++obj-$(CONFIG_TS_AU1X00_ADS7846) += au1000_ts.o
++obj-$(CONFIG_SERIAL_DEC) += decserial.o
++
++ifndef CONFIG_SUN_KEYBOARD
++ obj-$(CONFIG_VT) += keyboard.o $(KEYMAP) $(KEYBD)
++else
++ obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP)
++endif
++
++obj-$(CONFIG_HIL) += hp_keyb.o
++obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
++obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
++obj-$(CONFIG_ROCKETPORT) += rocket.o
++obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
++obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
++obj-$(CONFIG_DIGI) += pcxx.o
++obj-$(CONFIG_DIGIEPCA) += epca.o
++obj-$(CONFIG_CYCLADES) += cyclades.o
++obj-$(CONFIG_STALLION) += stallion.o
++obj-$(CONFIG_ISTALLION) += istallion.o
++obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o
++obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
++obj-$(CONFIG_RISCOM8) += riscom8.o
++obj-$(CONFIG_ISI) += isicom.o
++obj-$(CONFIG_ESPSERIAL) += esp.o
++obj-$(CONFIG_SYNCLINK) += synclink.o
++obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
++obj-$(CONFIG_N_HDLC) += n_hdlc.o
++obj-$(CONFIG_SPECIALIX) += specialix.o
++obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
++obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
++obj-$(CONFIG_SX) += sx.o generic_serial.o
++obj-$(CONFIG_RIO) += rio/rio.o generic_serial.o
++obj-$(CONFIG_SH_SCI) += sh-sci.o generic_serial.o
++obj-$(CONFIG_SERIAL167) += serial167.o
++obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o
++obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o
++obj-$(CONFIG_TXX927_SERIAL) += serial_txx927.o
++obj-$(CONFIG_SERIAL_TXX9) += generic_serial.o serial_txx9.o
++obj-$(CONFIG_IP22_SERIAL) += sgiserial.o
++obj-$(CONFIG_AU1X00_UART) += au1x00-serial.o
++obj-$(CONFIG_SGI_L1_SERIAL) += sn_serial.o
++
++subdir-$(CONFIG_RIO) += rio
++subdir-$(CONFIG_INPUT) += joystick
++
++obj-$(CONFIG_ATIXL_BUSMOUSE) += atixlmouse.o
++obj-$(CONFIG_LOGIBUSMOUSE) += logibusmouse.o
++obj-$(CONFIG_PRINTER) += lp.o
++obj-$(CONFIG_TIPAR) += tipar.o
++obj-$(CONFIG_OBMOUSE) += obmouse.o
++
++ifeq ($(CONFIG_INPUT),y)
++obj-y += joystick/js.o
++endif
++
++#
++# Texas Intruments VLYNQ driver
++#
++
++subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq
++obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o
++
++obj-$(CONFIG_FETCHOP) += fetchop.o
++obj-$(CONFIG_BUSMOUSE) += busmouse.o
++obj-$(CONFIG_DTLK) += dtlk.o
++obj-$(CONFIG_R3964) += n_r3964.o
++obj-$(CONFIG_APPLICOM) += applicom.o
++obj-$(CONFIG_SONYPI) += sonypi.o
++obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o
++obj-$(CONFIG_82C710_MOUSE) += qpmouse.o
++obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o
++obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
++obj-$(CONFIG_ADBMOUSE) += adbmouse.o
++obj-$(CONFIG_PC110_PAD) += pc110pad.o
++obj-$(CONFIG_MK712_MOUSE) += mk712.o
++obj-$(CONFIG_RTC) += rtc.o
++obj-$(CONFIG_GEN_RTC) += genrtc.o
++obj-$(CONFIG_EFI_RTC) += efirtc.o
++obj-$(CONFIG_MIPS_RTC) += mips_rtc.o
++obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
++ifeq ($(CONFIG_PPC),)
++ obj-$(CONFIG_NVRAM) += nvram.o
++endif
++obj-$(CONFIG_TOSHIBA) += toshiba.o
++obj-$(CONFIG_I8K) += i8k.o
++obj-$(CONFIG_DS1286) += ds1286.o
++obj-$(CONFIG_DS1620) += ds1620.o
++obj-$(CONFIG_DS1742) += ds1742.o
++obj-$(CONFIG_INTEL_RNG) += i810_rng.o
++obj-$(CONFIG_AMD_RNG) += amd768_rng.o
++obj-$(CONFIG_HW_RANDOM) += hw_random.o
++obj-$(CONFIG_AMD_PM768) += amd76x_pm.o
++obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o
++
++obj-$(CONFIG_ITE_GPIO) += ite_gpio.o
++obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o
++obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o
++obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o
++obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o
++obj-$(CONFIG_COBALT_LCD) += lcd.o
++
++obj-$(CONFIG_QIC02_TAPE) += tpqic02.o
++
++subdir-$(CONFIG_FTAPE) += ftape
++subdir-$(CONFIG_DRM_OLD) += drm-4.0
++subdir-$(CONFIG_DRM_NEW) += drm
++subdir-$(CONFIG_PCMCIA) += pcmcia
++subdir-$(CONFIG_AGP) += agp
++
++ifeq ($(CONFIG_FTAPE),y)
++obj-y += ftape/ftape.o
++endif
++
++obj-$(CONFIG_H8) += h8.o
++obj-$(CONFIG_PPDEV) += ppdev.o
++obj-$(CONFIG_DZ) += dz.o
++obj-$(CONFIG_NWBUTTON) += nwbutton.o
++obj-$(CONFIG_NWFLASH) += nwflash.o
++obj-$(CONFIG_SCx200) += scx200.o
++obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
++
++# Only one watchdog can succeed. We probe the hardware watchdog
++# drivers first, then the softdog driver. This means if your hardware
++# watchdog dies or is 'borrowed' for some reason the software watchdog
++# still gives you some cover.
++
++obj-$(CONFIG_PCWATCHDOG) += pcwd.o
++obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
++obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
++obj-$(CONFIG_IB700_WDT) += ib700wdt.o
++obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
++obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
++obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
++obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
++obj-$(CONFIG_WDT) += wdt.o
++obj-$(CONFIG_WDTPCI) += wdt_pci.o
++obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
++obj-$(CONFIG_977_WATCHDOG) += wdt977.o
++obj-$(CONFIG_I810_TCO) += i810-tco.o
++obj-$(CONFIG_MACHZ_WDT) += machzwd.o
++obj-$(CONFIG_SH_WDT) += shwdt.o
++obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
++obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
++obj-$(CONFIG_ALIM1535_WDT) += alim1535d_wdt.o
++obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
++obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
++obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
++obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
++obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
++
++subdir-$(CONFIG_MWAVE) += mwave
++ifeq ($(CONFIG_MWAVE),y)
++ obj-y += mwave/mwave.o
++endif
++
++subdir-$(CONFIG_IPMI_HANDLER) += ipmi
++ifeq ($(CONFIG_IPMI_HANDLER),y)
++ obj-y += ipmi/ipmi.o
++endif
++
++include $(TOPDIR)/Rules.make
++
++fastdep:
++
++conmakehash: conmakehash.c
++ $(HOSTCC) $(HOSTCFLAGS) -o conmakehash conmakehash.c
++
++consolemap_deftbl.c: $(FONTMAPFILE) conmakehash
++ ./conmakehash $(FONTMAPFILE) > consolemap_deftbl.c
++
++consolemap_deftbl.o: consolemap_deftbl.c $(TOPDIR)/include/linux/types.h
++
++.DELETE_ON_ERROR:
++
++defkeymap.c: defkeymap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
++
++qtronixmap.c: qtronixmap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
++
++ibm_workpad_keymap.c: ibm_workpad_keymap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
++
++victor_mpc30x_keymap.c: victor_mpc30x_keymap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
+diff -urN linux.old/drivers/char/avalanche_vlynq/Makefile linux.dev/drivers/char/avalanche_vlynq/Makefile
+--- linux.old/drivers/char/avalanche_vlynq/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/Makefile 2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,16 @@
++#
++# Makefile for the linux kernel.
++#
++# Note! Dependencies are done automagically by 'make dep', which also
++# removes any old dependencies. DON'T put your own dependencies here
++# unless it's something special (ie not a .c file).
++#
++# Note 2! The CFLAGS definitions are now in the main makefile...
++
++O_TARGET := avalanche_vlynq.o
++
++export-objs := vlynq_board.o
++
++obj-y += vlynq_drv.o vlynq_hal.o vlynq_board.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_board.c linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_board.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c 2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,184 @@
++/*
++ * Jeff Harrell, jharrell@ti.com
++ * Copyright (C) 2001 Texas Instruments, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Texas Instruments Sangam specific setup.
++ */
++#include <linux/config.h>
++#include <linux/module.h>
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/avalanche_misc.h>
++#include <asm/ar7/vlynq.h>
++
++#define SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR 30 /* MSB - 1 bit */
++#define SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR 31 /* MSB bit */
++#define SYS_VLYNQ_OPTIONS 0x7F; /* all options*/
++
++/* These defines are board specific */
++
++
++#define VLYNQ0_REMOTE_WINDOW1_OFFSET (0x0C000000)
++#define VLYNQ0_REMOTE_WINDOW1_SIZE (0x500)
++
++
++#define VLYNQ1_REMOTE_WINDOW1_OFFSET (0x0C000000)
++#define VLYNQ1_REMOTE_WINDOW1_SIZE (0x500)
++
++
++extern VLYNQ_DEV vlynqDevice0, vlynqDevice1;
++int vlynq_init_status[2] = {0, 0};
++EXPORT_SYMBOL(vlynq_init_status);
++static int reset_hack = 1;
++
++void vlynq_ar7wrd_dev_init()
++{
++ *(unsigned long*) AVALANCHE_GPIO_ENBL |= (1<<18);
++ vlynq_delay(20000);
++ *(unsigned long*) AVALANCHE_GPIO_DIR &= ~(1<<18);
++ vlynq_delay(20000);
++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT&= ~(1<<18);
++ vlynq_delay(50000);
++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT|= (1<<18);
++ vlynq_delay(50000);
++
++ /* Initialize the MIPS host vlynq driver for a given vlynq interface */
++ vlynqDevice0.dev_idx = 0; /* first vlynq module - this parameter is for reference only */
++ vlynqDevice0.module_base = AVALANCHE_LOW_VLYNQ_CONTROL_BASE; /* vlynq0 module base address */
++
++#if defined(CONFIG_VLYNQ_CLK_LOCAL)
++ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_LOCAL;
++#else
++ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_REMOTE;
++#endif
++ vlynqDevice0.clk_div = 0x01; /* board/hardware specific */
++ vlynqDevice0.state = VLYNQ_DRV_STATE_UNINIT; /* uninitialized module */
++
++ /* Populate vlynqDevice0.local_mem & Vlynq0.remote_mem based on system configuration */
++ /*Local memory configuration */
++
++ /* Demiurg : not good !*/
++#if 0
++ vlynqDevice0.local_mem.Txmap= AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE & ~(0xc0000000) ; /* physical address */
++ vlynqDevice0.remote_mem.RxOffset[0]= VLYNQ0_REMOTE_WINDOW1_OFFSET; /* This is specific to the board on the other end */
++ vlynqDevice0.remote_mem.RxSize[0]=VLYNQ0_REMOTE_WINDOW1_SIZE;
++#endif
++
++ /* Demiurg : This is how it should be ! */
++ vlynqDevice0.local_mem.Txmap = PHYSADDR(AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE);
++#define VLYNQ_ACX111_MEM_OFFSET 0xC0000000 /* Physical address of ACX111 memory */
++#define VLYNQ_ACX111_MEM_SIZE 0x00040000 /* Total size of the ACX111 memory */
++#define VLYNQ_ACX111_REG_OFFSET 0xF0000000 /* PHYS_ADDR of ACX111 control registers */
++#define VLYNQ_ACX111_REG_SIZE 0x00022000 /* Size of ACX111 registers area, MAC+PHY */
++#define ACX111_VL1_REMOTE_SIZE 0x1000000
++ vlynqDevice0.remote_mem.RxOffset[0] = VLYNQ_ACX111_MEM_OFFSET;
++ vlynqDevice0.remote_mem.RxSize[0] = VLYNQ_ACX111_MEM_SIZE ;
++ vlynqDevice0.remote_mem.RxOffset[1] = VLYNQ_ACX111_REG_OFFSET;
++ vlynqDevice0.remote_mem.RxSize[1] = VLYNQ_ACX111_REG_SIZE ;
++ vlynqDevice0.remote_mem.Txmap = 0;
++ vlynqDevice0.local_mem.RxOffset[0] = AVALANCHE_SDRAM_BASE;
++ vlynqDevice0.local_mem.RxSize[0] = ACX111_VL1_REMOTE_SIZE;
++
++
++ /* Local interrupt configuration */
++ vlynqDevice0.local_irq.intLocal = VLYNQ_INT_LOCAL; /* Host handles vlynq interrupts*/
++ vlynqDevice0.local_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* vlynq root isr used */
++ vlynqDevice0.local_irq.map_vector = SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR;
++ vlynqDevice0.local_irq.intr_ptr = 0; /* Since remote interrupts part of vlynq root isr this is unused */
++
++ /* Remote interrupt configuration */
++ vlynqDevice0.remote_irq.intLocal = VLYNQ_INT_REMOTE; /* MIPS handles interrupts */
++ vlynqDevice0.remote_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* Not significant since MIPS handles interrupts */
++ vlynqDevice0.remote_irq.map_vector = SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR;
++ vlynqDevice0. remote_irq.intr_ptr = AVALANCHE_INTC_BASE; /* Not significant since MIPS handles interrupts */
++
++ if(reset_hack != 1)
++ printk("About to re-init the VLYNQ.\n");
++
++ if(vlynq_init(&vlynqDevice0,VLYNQ_INIT_PERFORM_ALL)== 0)
++ {
++ /* Suraj added the following to keep the 1130 going. */
++ vlynq_interrupt_vector_set(&vlynqDevice0, 0 /* intr vector line running into 1130 vlynq */,
++ 0 /* intr mapped onto the interrupt register on remote vlynq and this vlynq */,
++ VLYNQ_REMOTE_DVC, 0 /* polarity active high */, 0 /* interrupt Level triggered */);
++
++ /* System wide interrupt is 80 for 1130, please note. */
++ vlynq_init_status[0] = 1;
++ reset_hack = 2;
++ }
++ else
++ {
++ if(reset_hack == 1)
++ printk("VLYNQ INIT FAILED: Please try cold reboot. \n");
++ else
++ printk("Failed to initialize the VLYNQ interface at insmod.\n");
++
++ }
++}
++
++void vlynq_dev_init(void)
++{
++ volatile unsigned int *reset_base = (unsigned int *) AVALANCHE_RESET_CONTROL_BASE;
++
++ *reset_base &= ~((1 << AVALANCHE_LOW_VLYNQ_RESET_BIT)); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT)); */
++
++ vlynq_delay(20000);
++
++ /* Bring vlynq out of reset if not already done */
++ *reset_base |= (1 << AVALANCHE_LOW_VLYNQ_RESET_BIT); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT); */
++ vlynq_delay(20000); /* Allowing sufficient time to VLYNQ to settle down.*/
++
++ vlynq_ar7wrd_dev_init( );
++
++}
++
++/* This function is board specific and should be ported for each board. */
++void remote_vlynq_dev_reset_ctrl(unsigned int module_reset_bit,
++ AVALANCHE_RESET_CTRL_T reset_ctrl)
++{
++ if(module_reset_bit >= 32)
++ return;
++
++ switch(module_reset_bit)
++ {
++ case 0:
++ if(OUT_OF_RESET == reset_ctrl)
++ {
++ if(reset_hack) return;
++
++ vlynq_delay(20000);
++ printk("Un-resetting the remote device.\n");
++ vlynq_dev_init();
++ printk("Re-initialized the VLYNQ.\n");
++ reset_hack = 2;
++ }
++ else if(IN_RESET == reset_ctrl)
++ {
++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT &= ~(1<<18);
++
++ vlynq_delay(20000);
++ printk("Resetting the remote device.\n");
++ reset_hack = 0;
++ }
++ else
++ ;
++ break;
++
++ default:
++ break;
++
++ }
++}
++
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c 2005-11-10 01:10:45.891577500 +0100
+@@ -0,0 +1,243 @@
++/******************************************************************************
++ * FILE PURPOSE: Vlynq Linux Device Driver Source
++ ******************************************************************************
++ * FILE NAME: vlynq_drv.c
++ *
++ * DESCRIPTION: Vlynq Linux Device Driver Source
++ *
++ * REVISION HISTORY:
++ *
++ * Date Description Author
++ *-----------------------------------------------------------------------------
++ * 17 July 2003 Initial Creation Anant Gole
++ * 17 Dec 2003 Updates Sharath Kumar
++ *
++ * (C) Copyright 2003, Texas Instruments, Inc
++ *******************************************************************************/
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/miscdevice.h>
++#include <linux/smp_lock.h>
++#include <linux/delay.h>
++#include <linux/proc_fs.h>
++#include <linux/capability.h>
++#include <asm/ar7/avalanche_intc.h>
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/vlynq.h>
++
++
++#define TI_VLYNQ_VERSION "0.2"
++
++/* debug on ? */
++#define VLYNQ_DEBUG
++
++/* Macro for debug and error printf's */
++#ifdef VLYNQ_DEBUG
++#define DBGPRINT printk
++#else
++#define DBGPRINT(x)
++#endif
++
++#define ERRPRINT printk
++
++/* Define the max vlynq ports this driver will support.
++ Device name strings are statically added here */
++#define MAX_VLYNQ_PORTS 2
++
++
++/* Type define for VLYNQ private structure */
++typedef struct vlynqPriv{
++ int irq;
++ VLYNQ_DEV *vlynqDevice;
++}VLYNQ_PRIV;
++
++extern int vlynq_init_status[2];
++
++/* Extern Global variable for vlynq devices used in initialization of the vlynq device
++ * These variables need to be populated/initialized by the system as part of initialization
++ * process. The vlynq enumerator can run at initialization and populate these globals
++ */
++
++VLYNQ_DEV vlynqDevice0;
++VLYNQ_DEV vlynqDevice1;
++
++/* Defining dummy macro AVALANCHE_HIGH_VLYNQ_INT to take
++ * care of compilation in case of single vlynq device
++ */
++
++#ifndef AVALANCHE_HIGH_VLYNQ_INT
++#define AVALANCHE_HIGH_VLYNQ_INT 0
++#endif
++
++
++
++/* vlynq private object */
++VLYNQ_PRIV vlynq_priv[CONFIG_AR7_VLYNQ_PORTS] = {
++ { LNXINTNUM(AVALANCHE_LOW_VLYNQ_INT),&vlynqDevice0},
++ { LNXINTNUM(AVALANCHE_HIGH_VLYNQ_INT),&vlynqDevice1},
++};
++
++extern void vlynq_dev_init(void);
++
++
++/* =================================== all the operations */
++
++static int
++vlynq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++ return 0;
++}
++
++static struct file_operations vlynq_fops = {
++ owner: THIS_MODULE,
++ ioctl: vlynq_ioctl,
++};
++
++/* Vlynq device object */
++static struct miscdevice vlynq_dev [MAX_VLYNQ_PORTS] = {
++ { MISC_DYNAMIC_MINOR , "vlynq0", &vlynq_fops },
++ { MISC_DYNAMIC_MINOR , "vlynq1", &vlynq_fops },
++};
++
++
++/* Proc read function */
++static int
++vlynq_read_link_proc(char *buf, char **start, off_t offset, int count, int *eof, void *unused)
++{
++ int instance;
++ int len = 0;
++
++ len += sprintf(buf +len,"VLYNQ Devices : %d\n",CONFIG_AR7_VLYNQ_PORTS);
++
++ for(instance =0;instance < CONFIG_AR7_VLYNQ_PORTS;instance++)
++ {
++ int link_state;
++ char *link_msg[] = {" DOWN "," UP "};
++
++ if(vlynq_init_status[instance] == 0)
++ link_state = 0;
++
++ else if (vlynq_link_check(vlynq_priv[instance].vlynqDevice))
++ link_state = 1;
++
++ else
++ link_state = 0;
++
++ len += sprintf(buf + len, "VLYNQ %d: Link state: %s\n",instance,link_msg[link_state]);
++
++ }
++ /* Print info about vlynq device 1 */
++
++ return len;
++}
++
++
++/* Proc function to display driver version */
++static int
++vlynq_read_ver_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++{
++ int instance;
++ int len=0;
++
++ len += sprintf(buf +len,"\nTI Linux VLYNQ Driver Version %s\n",TI_VLYNQ_VERSION);
++ return len;
++}
++
++
++
++
++/* Wrapper for vlynq ISR */
++static void lnx_vlynq_root_isr(int irq, void * arg, struct pt_regs *regs)
++{
++ vlynq_root_isr(arg);
++}
++
++/* =================================== init and cleanup */
++
++int vlynq_init_module(void)
++{
++ int ret;
++ int unit = 0;
++ int instance_count = CONFIG_AR7_VLYNQ_PORTS;
++ volatile int *ptr;
++
++ vlynq_dev_init();
++
++ DBGPRINT("Vlynq CONFIG_AR7_VLYNQ_PORTS=%d\n", CONFIG_AR7_VLYNQ_PORTS);
++ /* If num of configured vlynq ports > supported by driver return error */
++ if (instance_count > MAX_VLYNQ_PORTS)
++ {
++ ERRPRINT("ERROR: vlynq_init_module(): Max %d supported\n", MAX_VLYNQ_PORTS);
++ return (-1);
++ }
++
++ /* register the misc device */
++ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++)
++ {
++ ret = misc_register(&vlynq_dev[unit]);
++
++ if(ret < 0)
++ {
++ ERRPRINT("ERROR:Could not register vlynq device:%d\n",unit);
++ continue;
++ }
++ else
++ DBGPRINT("Vlynq Device %s registered with minor no %d as misc device. Result=%d\n",
++ vlynq_dev[unit].name, vlynq_dev[unit].minor, ret);
++#if 0
++
++ DBGPRINT("Calling vlynq init\n");
++
++ /* Read the global variable for VLYNQ device structure and initialize vlynq driver */
++ ret = vlynq_init(vlynq_priv[unit].vlynqDevice,VLYNQ_INIT_PERFORM_ALL );
++#endif
++
++ if(vlynq_init_status[unit] == 0)
++ {
++ printk("VLYNQ %d : init failed\n",unit);
++ continue;
++ }
++
++ /* Check link before proceeding */
++ if (!vlynq_link_check(vlynq_priv[unit].vlynqDevice))
++ {
++ DBGPRINT("\nError: Vlynq link not available.trying once before Exiting");
++ }
++ else
++ {
++ DBGPRINT("Vlynq instance:%d Link UP\n",unit);
++
++ /* Install the vlynq local root ISR */
++ request_irq(vlynq_priv[unit].irq,lnx_vlynq_root_isr,0,vlynq_dev[unit].name,vlynq_priv[unit].vlynqDevice);
++ }
++ }
++
++ proc_mkdir("avalanche", NULL);
++ /* Creating proc entry for the devices */
++ create_proc_read_entry("avalanche/vlynq_link", 0, NULL, vlynq_read_link_proc, NULL);
++ create_proc_read_entry("avalanche/vlynq_ver", 0, NULL, vlynq_read_ver_proc, NULL);
++
++ return 0;
++}
++
++void vlynq_cleanup_module(void)
++{
++ int unit = 0;
++
++ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++)
++ {
++ DBGPRINT("vlynq_cleanup_module(): Unregistring misc device %s\n",vlynq_dev[unit].name);
++ misc_deregister(&vlynq_dev[unit]);
++ }
++
++ remove_proc_entry("avalanche/vlynq_link", NULL);
++ remove_proc_entry("avalanche/vlynq_ver", NULL);
++}
++
++
++module_init(vlynq_init_module);
++module_exit(vlynq_cleanup_module);
++
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c 2005-11-10 01:10:45.975582750 +0100
+@@ -0,0 +1,1214 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/***************************************************************************
++ * ------------------------------------------------------------------------------
++ * Module : vlynq_hal.c
++ * Description : This file implements VLYNQ HAL API.
++ * ------------------------------------------------------------------------------
++ ***************************************************************************/
++
++#include <linux/stddef.h>
++#include <linux/types.h>
++#include <asm/ar7/vlynq.h>
++
++/**** Local Function prototypes *******/
++static int vlynqInterruptInit(VLYNQ_DEV *pdev);
++static void vlynq_configClock(VLYNQ_DEV *pdev);
++
++/*** Second argument must be explicitly type casted to
++ * (VLYNQ_DEV*) inside the following functions */
++static void vlynq_local_module_isr(void *arg1, void *arg2, void *arg3);
++static void vlynq_remote_module_isr(void *arg1, void *arg2, void *arg3);
++
++
++volatile int vlynq_delay_value = 0;
++
++/* Code adopted from original vlynq driver */
++void vlynq_delay(unsigned int clktime)
++{
++ int i = 0;
++ volatile int *ptr = &vlynq_delay_value;
++ *ptr = 0;
++
++ /* We are assuming that the each cycle takes about
++ * 23 assembly instructions. */
++ for(i = 0; i < (clktime + 23)/23; i++)
++ {
++ *ptr = *ptr + 1;
++ }
++}
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_configClock()
++ * Description: Configures clock settings based on input parameters
++ * Adapted from original vlyna driver from Cable
++ */
++static void vlynq_configClock(VLYNQ_DEV * pdev)
++{
++ unsigned int tmp;
++
++ switch( pdev->clk_source)
++ {
++ case VLYNQ_CLK_SOURCE_LOCAL: /* we output the clock, clk_div in range [1..8]. */
++ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ;
++ VLYNQ_CTRL_REG = tmp;
++ VLYNQ_R_CTRL_REG = 0ul;
++ break;
++ case VLYNQ_CLK_SOURCE_REMOTE: /* we need to set the clock pin as input */
++ VLYNQ_CTRL_REG = 0ul;
++ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ;
++ VLYNQ_R_CTRL_REG = tmp;
++ break;
++ default: /* do nothing about the clock, but clear other bits. */
++ tmp = ~(VLYNQ_CTL_CLKDIR_MASK | VLYNQ_CTL_CLKDIV_MASK);
++ VLYNQ_CTRL_REG &= tmp;
++ break;
++ }
++}
++
++ /* ----------------------------------------------------------------------------
++ * Function : vlynq_link_check()
++ * Description: This function checks the current VLYNQ for a link.
++ * An arbitrary amount of time is allowed for the link to come up .
++ * Returns 0 for "no link / failure " and 1 for "link available".
++ * -----------------------------------------------------------------------------
++ */
++unsigned int vlynq_link_check( VLYNQ_DEV * pdev)
++{
++ /*sleep for 64 cycles, allow link to come up*/
++ vlynq_delay(64);
++
++ /* check status register return OK if link is found. */
++ if (VLYNQ_STATUS_REG & VLYNQ_STS_LINK_MASK)
++ {
++ return 1; /* Link Available */
++ }
++ else
++ {
++ return 0; /* Link Failure */
++ }
++}
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_init()
++ * Description: Initialization function accepting paramaters for VLYNQ module
++ * initialization. The Options bitmap decides what operations are performed
++ * as a part of initialization. The Input parameters are obtained through the
++ * sub fields of VLYNQ_DEV structure.
++ */
++
++int vlynq_init(VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options)
++{
++ unsigned int map;
++ unsigned int val=0,cnt,tmp;
++ unsigned int counter=0;
++ VLYNQ_INTERRUPT_CNTRL *intSetting=NULL;
++
++ /* validate arguments */
++ if( VLYNQ_OUTRANGE(pdev->clk_source, VLYNQ_CLK_SOURCE_REMOTE, VLYNQ_CLK_SOURCE_NONE) ||
++ VLYNQ_OUTRANGE(pdev->clk_div, 8, 1) )
++ {
++ return VLYNQ_INVALID_ARG;
++ }
++
++ /** perform all sanity checks first **/
++ if(pdev->state != VLYNQ_DRV_STATE_UNINIT)
++ return VLYNQ_INVALID_DRV_STATE;
++
++ /** Initialize local and remote register set addresses- additional
++ * provision to access the registers directly if need be */
++ pdev->local = (VLYNQ_REG_SET*)pdev->module_base;
++ pdev->remote = (VLYNQ_REG_SET*) (pdev->module_base + VLYNQ_REMOTE_REGS_OFFSET);
++
++ /* Detect faulty int configuration that might induce int pkt looping */
++ if ( (options & VLYNQ_INIT_LOCAL_INTERRUPTS) && (options & VLYNQ_INIT_REMOTE_INTERRUPTS) )
++ {
++ /* case when both local and remote are configured */
++ if((pdev->local_irq.intLocal== VLYNQ_INT_REMOTE ) /* interrupts transfered to remote from local */
++ && (pdev->remote_irq.intLocal== VLYNQ_INT_REMOTE) /* interrupts transfered from remote to local */
++ && ((pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) || (pdev->remote_irq.intRemote == VLYNQ_INT_ROOT_ISR)) )
++ {
++ return (VLYNQ_INT_CONFIG_ERR);
++ }
++ }
++
++ pdev->state = VLYNQ_DRV_STATE_ININIT;
++ pdev->intCount = 0;
++ pdev->isrCount = 0;
++
++ /*** Its assumed that the vlynq module has been brought out of reset
++ * before invocation of vlynq_init. Since, this operation is board specific
++ * it must be handled outside this generic driver */
++
++ /* Assert reset the remote device, call reset_cb,
++ * reset CB holds Reset according to the device needs. */
++ VLYNQ_RESETCB(VLYNQ_RESET_ASSERT);
++
++ /* Handle VLYNQ clock, HW default (Sense On Reset) is
++ * usually input for all the devices. */
++ if (options & VLYNQ_INIT_CONFIG_CLOCK)
++ {
++ vlynq_configClock(pdev);
++ }
++
++ /* Call reset_cb again. It will release the remote device
++ * from reset, and wait for a while. */
++ VLYNQ_RESETCB(VLYNQ_RESET_DEASSERT);
++
++ if(options & VLYNQ_INIT_CHECK_LINK )
++ {
++ /* Check for link up during initialization*/
++ while( counter < 25 )
++ {
++ /* loop around giving a chance for link status to settle down */
++ counter++;
++ if(vlynq_link_check(pdev))
++ {
++ /* Link is up exit loop*/
++ break;
++ }
++
++ vlynq_delay(4000);
++ }/*end of while counter loop */
++
++ if(!vlynq_link_check(pdev))
++ {
++ /* Handle this case as abort */
++ pdev->state = VLYNQ_DRV_STATE_ERROR;
++ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL);
++ return VLYNQ_LINK_DOWN;
++ }/* end of if not vlynq_link_check conditional block */
++
++ }/*end of if options & VLYNQ_INIT_CHECK_LINK conditional block */
++
++
++ if (options & VLYNQ_INIT_LOCAL_MEM_REGIONS)
++ {
++ /* Initialise local memory regions . This initialization lets
++ * the local host access remote device memory regions*/
++ int i;
++
++ /* configure the VLYNQ portal window to a PHYSICAL
++ * address of the local CPU */
++ VLYNQ_ALIGN4(pdev->local_mem.Txmap);
++ VLYNQ_TXMAP_REG = (pdev->local_mem.Txmap);
++
++ /*This code assumes input parameter is itself a physical address */
++ for(i=0; i < VLYNQ_MAX_MEMORY_REGIONS ; i++)
++ {
++ /* Physical address on the remote */
++ map = i+1;
++ VLYNQ_R_RXMAP_SIZE_REG(map) = 0;
++ if( pdev->remote_mem.RxSize[i])
++ {
++ VLYNQ_ALIGN4(pdev->remote_mem.RxOffset[i]);
++ VLYNQ_ALIGN4(pdev->remote_mem.RxSize[i]);
++ VLYNQ_R_RXMAP_OFFSET_REG(map) = pdev->remote_mem.RxOffset[i];
++ VLYNQ_R_RXMAP_SIZE_REG(map) = pdev->remote_mem.RxSize[i];
++ }
++ }
++ }
++
++ if(options & VLYNQ_INIT_REMOTE_MEM_REGIONS )
++ {
++ int i;
++
++ /* Initialise remote memory regions. This initialization lets remote
++ * device access local host memory regions. It configures the VLYNQ portal
++ * window to a PHYSICAL address of the remote */
++ VLYNQ_ALIGN4(pdev->remote_mem.Txmap);
++ VLYNQ_R_TXMAP_REG = pdev->remote_mem.Txmap;
++
++ for( i=0; i<VLYNQ_MAX_MEMORY_REGIONS; i++)
++ {
++ /* Physical address on the local */
++ map = i+1;
++ VLYNQ_RXMAP_SIZE_REG(map) = 0;
++ if( pdev->local_mem.RxSize[i])
++ {
++ VLYNQ_ALIGN4(pdev->local_mem.RxOffset[i]);
++ VLYNQ_ALIGN4(pdev->local_mem.RxSize[i]);
++ VLYNQ_RXMAP_OFFSET_REG(map) = (pdev->local_mem.RxOffset[i]);
++ VLYNQ_RXMAP_SIZE_REG(map) = (pdev->local_mem.RxSize[i]);
++ }
++ }
++ }
++
++ /* Adapted from original vlynq driver from cable - Calculate VLYNQ bus width */
++ pdev->width = 3 + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_STATUS_REG)
++ + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_R_STATUS_REG);
++
++ /* chance to initialize the device, e.g. to boost VLYNQ
++ * clock by modifying pdev->clk_div or and verify the width. */
++ VLYNQ_RESETCB(VLYNQ_RESET_LINKESTABLISH);
++
++ /* Handle VLYNQ clock, HW default (Sense On Reset) is
++ * usually input for all the devices. */
++ if(options & VLYNQ_INIT_CONFIG_CLOCK )
++ {
++ vlynq_configClock(pdev);
++ }
++
++ /* last check for link*/
++ if(options & VLYNQ_INIT_CHECK_LINK )
++ {
++ /* Final Check for link during initialization*/
++ while( counter < 25 )
++ {
++ /* loop around giving a chance for link status to settle down */
++ counter++;
++ if(vlynq_link_check(pdev))
++ {
++ /* Link is up exit loop*/
++ break;
++ }
++
++ vlynq_delay(4000);
++ }/*end of while counter loop */
++
++ if(!vlynq_link_check(pdev))
++ {
++ /* Handle this case as abort */
++ pdev->state = VLYNQ_DRV_STATE_ERROR;
++ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL);
++ return VLYNQ_LINK_DOWN;
++ }/* end of if not vlynq_link_check conditional block */
++
++ } /* end of if options & VLYNQ_INIT_CHECK_LINK */
++
++ if(options & VLYNQ_INIT_LOCAL_INTERRUPTS )
++ {
++ /* Configure local interrupt settings */
++ intSetting = &(pdev->local_irq);
++
++ /* Map local module status interrupts to interrupt vector*/
++ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ;
++
++ /* enable local module status interrupts */
++ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT;
++
++ if ( intSetting->intLocal == VLYNQ_INT_LOCAL )
++ {
++ /*set the intLocal bit*/
++ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT;
++ }
++
++ /* Irrespective of whether interrupts are handled locally, program
++ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1
++ * i.e remote packets are set intPending register->which will result in
++ * same packet being sent out) has been done already
++ */
++
++ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR)
++ {
++ /* Set the int2Cfg register, so that remote interrupt
++ * packets are written to intPending register */
++ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT;
++
++ /* Set intPtr register to point to intPending register */
++ VLYNQ_INT_PTR_REG = VLYNQ_INT_PENDING_REG_PTR ;
++ }
++ else
++ {
++ /*set the interrupt pointer register*/
++ VLYNQ_INT_PTR_REG = intSetting->intr_ptr;
++ /* Dont bother to modify int2Cfg as it would be zero */
++ }
++
++ /** Clear bits related to INT settings in control register **/
++ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK);
++
++ /** Or the bits to be set with Control register **/
++ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG | val;
++
++ /* initialise local ICB */
++ if(vlynqInterruptInit(pdev)==VLYNQ_MEMALLOC_FAIL)
++ return VLYNQ_MEMALLOC_FAIL;
++
++ /* Install handler for local module status interrupts. By default when
++ * local interrupt setting is initialised, the local module status are
++ * enabled and handler hooked up */
++ if(vlynq_install_isr(pdev, intSetting->map_vector, vlynq_local_module_isr,
++ pdev, NULL, NULL) == VLYNQ_INVALID_ARG)
++ return VLYNQ_INVALID_ARG;
++ } /* end of init local interrupts */
++
++ if(options & VLYNQ_INIT_REMOTE_INTERRUPTS )
++ {
++ /* Configure remote interrupt settings from configuration */
++ intSetting = &(pdev->remote_irq);
++
++ /* Map remote module status interrupts to remote interrupt vector*/
++ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ;
++ /* enable remote module status interrupts */
++ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT;
++
++ if ( intSetting->intLocal == VLYNQ_INT_LOCAL )
++ {
++ /*set the intLocal bit*/
++ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT;
++ }
++
++ /* Irrespective of whether interrupts are handled locally, program
++ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1
++ * i.e remote packets are set intPending register->which will result in
++ * same packet being sent out) has been done already
++ */
++
++ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR)
++ {
++ /* Set the int2Cfg register, so that remote interrupt
++ * packets are written to intPending register */
++ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT;
++ /* Set intPtr register to point to intPending register */
++ VLYNQ_R_INT_PTR_REG = VLYNQ_R_INT_PENDING_REG_PTR ;
++ }
++ else
++ {
++ /*set the interrupt pointer register*/
++ VLYNQ_R_INT_PTR_REG = intSetting->intr_ptr;
++ /* Dont bother to modify int2Cfg as it would be zero */
++ }
++
++ if( (intSetting->intLocal == VLYNQ_INT_REMOTE) &&
++ (options & VLYNQ_INIT_LOCAL_INTERRUPTS) &&
++ (pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) )
++ {
++ /* Install handler for remote module status interrupts. By default when
++ * remote interrupts are forwarded to local root_isr then remote_module_isr is
++ * enabled and handler hooked up */
++ if(vlynq_install_isr(pdev,intSetting->map_vector,vlynq_remote_module_isr,
++ pdev, NULL, NULL) == VLYNQ_INVALID_ARG)
++ return VLYNQ_INVALID_ARG;
++ }
++
++
++ /** Clear bits related to INT settings in control register **/
++ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK);
++
++ /** Or the bits to be set with the remote Control register **/
++ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG | val;
++
++ } /* init remote interrupt settings*/
++
++ if(options & VLYNQ_INIT_CLEAR_ERRORS )
++ {
++ /* Clear errors during initialization */
++ tmp = VLYNQ_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK);
++ VLYNQ_STATUS_REG = tmp;
++ tmp = VLYNQ_R_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK);
++ VLYNQ_R_STATUS_REG = tmp;
++ }
++
++ /* clear int status */
++ val = VLYNQ_INT_STAT_REG;
++ VLYNQ_INT_STAT_REG = val;
++
++ /* finish initialization */
++ pdev->state = VLYNQ_DRV_STATE_RUN;
++ VLYNQ_RESETCB( VLYNQ_RESET_INITOK);
++ return VLYNQ_SUCCESS;
++
++}
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynqInterruptInit()
++ * Description: This local function is used to set up the ICB table for the
++ * VLYNQ_STATUS_REG vlynq module. The input parameter "pdev" points the vlynq
++ * device instance whose ICB is allocated.
++ * Return : returns VLYNQ_SUCCESS or vlynq error for failure
++ * -----------------------------------------------------------------------------
++ */
++static int vlynqInterruptInit(VLYNQ_DEV *pdev)
++{
++ int i, numslots;
++
++ /* Memory allocated statically.
++ * Initialise ICB,free list.Indicate primary slot empty.
++ * Intialise intVector <==> map_vector translation table*/
++ for(i=0; i < VLYNQ_NUM_INT_BITS; i++)
++ {
++ pdev->pIntrCB[i].isr = NULL;
++ pdev->pIntrCB[i].next = NULL; /*nothing chained */
++ pdev->vector_map[i] = -1; /* indicates unmapped */
++ }
++
++ /* In the ICB slots, [VLYNQ_NUM_INT_BITS i.e 32 to ICB array size) are expansion slots
++ * required only when interrupt chaining/sharing is supported. In case
++ * of chained interrupts the list starts from primary slot and the
++ * additional slots are obtained from the common free area */
++
++ /* Initialise freelist */
++
++ numslots = VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS;
++
++ if (numslots > VLYNQ_NUM_INT_BITS)
++ {
++ pdev->freelist = &(pdev->pIntrCB[VLYNQ_NUM_INT_BITS]);
++
++ for(i = VLYNQ_NUM_INT_BITS; i < (numslots-1) ; i++)
++ {
++ pdev->pIntrCB[i].next = &(pdev->pIntrCB[i+1]);
++ pdev->pIntrCB[i].isr = NULL;
++ }
++ pdev->pIntrCB[i].next=NULL; /* Indicate end of freelist*/
++ pdev->pIntrCB[i].isr=NULL;
++ }
++ else
++ {
++ pdev->freelist = NULL;
++ }
++
++ /** Reset mapping for IV 0-7 **/
++ VLYNQ_IVR_03TO00_REG = 0;
++ VLYNQ_IVR_07TO04_REG = 0;
++
++ return VLYNQ_SUCCESS;
++}
++
++/** remember that hooking up of root ISR handler with the interrupt controller
++ * is not done as a part of this driver. Typically, it must be done after
++ * invoking vlynq_init*/
++
++
++ /* ----------------------------------------------------------------------------
++ * ISR with the SOC interrupt controller. This ISR typically scans
++ * the Int PENDING/SET register in the VLYNQ module and calls the
++ * appropriate ISR associated with the correponding vector number.
++ * -----------------------------------------------------------------------------
++ */
++void vlynq_root_isr(void *arg)
++{
++ int source; /* Bit position of pending interrupt, start from 0 */
++ unsigned int interrupts, clrInterrupts;
++ VLYNQ_DEV * pdev;
++ VLYNQ_INTR_CNTRL_ICB *entry;
++
++ pdev=(VLYNQ_DEV*)(arg); /*obtain the vlynq device pointer*/
++
++ interrupts = VLYNQ_INT_STAT_REG; /* Get the list of pending interrupts */
++ VLYNQ_INT_STAT_REG = interrupts; /* clear the int CR register */
++ clrInterrupts = interrupts; /* save them for further analysis */
++
++ debugPrint("vlynq_root_isr: dev %u. INTCR = 0x%08lx\n", pdev->dev_idx, clrInterrupts,0,0,0,0);
++
++ /* Scan interrupt bits */
++ source =0;
++ while( clrInterrupts != 0)
++ {
++ /* test if bit is set? */
++ if( 0x1ul & clrInterrupts)
++ {
++ entry = &(pdev->pIntrCB[source]); /* Get the ISR entry */
++ pdev->intCount++; /* update interrupt count */
++ if(entry->isr != NULL)
++ {
++ do
++ {
++ pdev->isrCount++; /* update isr invocation count */
++ /* Call the user ISR and update the count for ISR */
++ entry->isrCount++;
++ entry->isr(entry->arg1, entry->arg2, entry->arg3);
++ if (entry->next == NULL) break;
++ entry = entry->next;
++
++ } while (entry->isr != NULL);
++ }
++ else
++ {
++ debugPrint(" ISR not installed for vlynq vector:%d\n",source,0,0,0,0,0);
++ }
++ }
++ clrInterrupts >>= 1; /* Next source bit */
++ ++source;
++ } /* endWhile clrInterrupts != 0 */
++}
++
++
++ /* ----------------------------------------------------------------------------
++ * Function : vlynq_local__module_isr()
++ * Description: This ISR is attached to the local VLYNQ interrupt vector
++ * by the Vlynq Driver when local interrupts are being handled. i.e.
++ * intLocal=1. This ISR handles local Vlynq module status interrupts only
++ * AS a part of this ISR, user callback in VLYNQ_DEV structure
++ * is invoked.
++ * VLYNQ_DEV is passed as arg1. arg2 and arg3 are unused.
++ * -----------------------------------------------------------------------------
++ */
++static void vlynq_local_module_isr(void *arg1,void *arg2, void *arg3)
++{
++ VLYNQ_REPORT_CB func;
++ unsigned int dwStatRegVal;
++ VLYNQ_DEV * pdev;
++
++ pdev = (VLYNQ_DEV*) arg1;
++ /* Callback function is read from the device pointer that is passed as an argument */
++ func = pdev->report_cb;
++
++ /* read local status register */
++ dwStatRegVal = VLYNQ_STATUS_REG;
++
++ /* clear pending events */
++ VLYNQ_STATUS_REG = dwStatRegVal;
++
++ /* invoke user callback */
++ if( func != NULL)
++ func( pdev, VLYNQ_LOCAL_DVC, dwStatRegVal);
++
++}
++
++ /* ----------------------------------------------------------------------------
++ * Function : vlynq_remote_module_isr()
++ * Description: This ISR is attached to the remote VLYNQ interrupt vector
++ * by the Vlynq Driver when remote interrupts are being handled locally. i.e.
++ * intLocal=1. This ISR handles local Vlynq module status interrupts only
++ * AS a part of this ISR, user callback in VLYNQ_DEV structure
++ * is invoked.
++ * The parameters irq,regs ar unused.
++ * -----------------------------------------------------------------------------
++ */
++static void vlynq_remote_module_isr(void *arg1,void *arg2, void *arg3)
++{
++ VLYNQ_REPORT_CB func;
++ unsigned int dwStatRegVal;
++ VLYNQ_DEV * pdev;
++
++
++ pdev = (VLYNQ_DEV*) arg1;
++
++ /* Callback function is read from the device pointer that is passed as an argument */
++ func = pdev->report_cb;
++
++ /* read local status register */
++ dwStatRegVal = VLYNQ_R_STATUS_REG;
++
++ /* clear pending events */
++ VLYNQ_R_STATUS_REG = dwStatRegVal;
++
++ /* invoke user callback */
++ if( func != NULL)
++ func( pdev, VLYNQ_REMOTE_DVC, dwStatRegVal);
++
++}
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_interrupt_get_count()
++ * Description: This function returns the number of times a particular intr
++ * has been invoked.
++ *
++ * It returns 0, if erroneous map_vector is specified or if the corres isr
++ * has not been registered with VLYNQ.
++ */
++unsigned int vlynq_interrupt_get_count(VLYNQ_DEV *pdev,
++ unsigned int map_vector)
++{
++ VLYNQ_INTR_CNTRL_ICB *entry;
++ unsigned int count = 0;
++
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return count;
++
++ entry = &(pdev->pIntrCB[map_vector]);
++
++ if (entry)
++ count = entry->isrCount;
++
++ return (count);
++}
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_install_isr()
++ * Description: This function installs ISR for Vlynq interrupt vector
++ * bits(in IntPending register). This function should be used only when
++ * Vlynq interrupts are being handled locally(remote may be programmed to send
++ * interrupt packets).Also, the int2cfg should be 1 and the least significant
++ * 8 bits of the Interrupt Pointer Register must point to Interrupt
++ * Pending/Set Register).
++ * If host int2cfg=0 and the Interrupt Pointer register contains
++ * the address of the interrupt set register in the interrupt controller
++ * module of the local device , then the ISR for the remote interrupt must be
++ * directly registered with the Interrupt controller and must not use this API
++ * Note: this function simply installs the ISR in ICB It doesnt modify
++ * any register settings
++ */
++int
++vlynq_install_isr(VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ VLYNQ_INTR_CNTRL_ISR isr,
++ void *arg1, void *arg2, void *arg3)
++{
++ VLYNQ_INTR_CNTRL_ICB *entry;
++
++ if ( (map_vector > (VLYNQ_NUM_INT_BITS-1)) || (isr == NULL) )
++ return VLYNQ_INVALID_ARG;
++
++ entry = &(pdev->pIntrCB[map_vector]);
++
++ if(entry->isr == NULL)
++ {
++ entry->isr = isr;
++ entry->arg1 = arg1;
++ entry->arg2 = arg2;
++ entry->arg3 = arg3;
++ entry->next = NULL;
++ }
++ else
++ {
++ /** No more empty slots,return error */
++ if(pdev->freelist == NULL)
++ return VLYNQ_MEMALLOC_FAIL;
++
++ while(entry->next != NULL)
++ {
++ entry = entry->next;
++ }
++
++ /* Append new node to the chain */
++ entry->next = pdev->freelist;
++ /* Remove the appended node from freelist */
++ pdev->freelist = pdev->freelist->next;
++ entry= entry->next;
++
++ /*** Set the ICB fields ***/
++ entry->isr = isr;
++ entry->arg1 = arg1;
++ entry->arg2 = arg2;
++ entry->arg3 = arg3;
++ entry->next = NULL;
++ }
++
++ return VLYNQ_SUCCESS;
++}
++
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_uninstall_isr
++ * Description: This function is used to uninstall a previously
++ * registered ISR. In case of shared/chained interrupts, the
++ * void * arg parameter must uniquely identify the ISR to be
++ * uninstalled.
++ * Note: this function simply uninstalls the ISR in ICB
++ * It doesnt modify any register settings
++ */
++int
++vlynq_uninstall_isr(VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ void *arg1, void *arg2, void *arg3)
++{
++ VLYNQ_INTR_CNTRL_ICB *entry,*temp;
++
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return VLYNQ_INVALID_ARG;
++
++ entry = &(pdev->pIntrCB[map_vector]);
++
++ if(entry->isr == NULL )
++ return VLYNQ_ISR_NON_EXISTENT;
++
++ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) )
++ {
++ if(entry->next == NULL)
++ {
++ entry->isr=NULL;
++ return VLYNQ_SUCCESS;
++ }
++ else
++ {
++ temp = entry->next;
++ /* Copy next node in the chain to prim.slot */
++ entry->isr = temp->isr;
++ entry->arg1 = temp->arg1;
++ entry->arg2 = temp->arg2;
++ entry->arg3 = temp->arg3;
++ entry->next = temp->next;
++ /* Free the just copied node */
++ temp->isr = NULL;
++ temp->arg1 = NULL;
++ temp->arg2 = NULL;
++ temp->arg3 = NULL;
++ temp->next = pdev->freelist;
++ pdev->freelist = temp;
++ return VLYNQ_SUCCESS;
++ }
++ }
++ else
++ {
++ temp = entry;
++ while ( (entry = temp->next) != NULL)
++ {
++ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) )
++ {
++ /* remove node from chain */
++ temp->next = entry->next;
++ /* Add the removed node to freelist */
++ entry->isr = NULL;
++ entry->arg1 = NULL;
++ entry->arg2 = NULL;
++ entry->arg3 = NULL;
++ entry->next = pdev->freelist;
++ entry->isrCount = 0;
++ pdev->freelist = entry;
++ return VLYNQ_SUCCESS;
++ }
++ temp = entry;
++ }
++
++ return VLYNQ_ISR_NON_EXISTENT;
++ }
++}
++
++
++
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_vector_set()
++ * description:configures interrupt vector mapping,interrupt type
++ * polarity -all in one go.
++ */
++int
++vlynq_interrupt_vector_set(VLYNQ_DEV *pdev, /* vlynq device */
++ unsigned int int_vector, /* int vector on vlynq device */
++ unsigned int map_vector, /* bit for this interrupt */
++ VLYNQ_DEV_TYPE dev_type, /* local or remote device */
++ VLYNQ_INTR_POLARITY pol, /* polarity of interrupt */
++ VLYNQ_INTR_TYPE type) /* pulsed/level interrupt */
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ unsigned int bytemask=0XFF;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ /* validate the number of interrupts supported */
++ if (int_vector >= VLYNQ_IVR_MAXIVR)
++ return VLYNQ_INVALID_ARG;
++
++ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) )
++ return VLYNQ_INVALID_ARG;
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* Update the intVector<==> bit position translation table */
++ pdev->vector_map[map_vector] = int_vector;
++
++ /* val has been initialised to zero. we only have to turn on appropriate bits*/
++ if(type == VLYNQ_INTR_PULSED)
++ val |= VLYNQ_IVR_INTTYPE_MASK;
++
++ if(pol == VLYNQ_INTR_ACTIVE_LOW)
++ val |= VLYNQ_IVR_INTPOL_MASK;
++
++ val |= map_vector;
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++ /* Setting a interrupt vector, leaves the interrupt disabled
++ * which must be enabled subsequently */
++
++ return VLYNQ_SUCCESS;
++}
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_interrupt_vector_cntl()
++ * Description:enables/disable interrupt
++ */
++int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++ unsigned int int_vector,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int enable)
++{
++ volatile unsigned int *vecReg;
++ unsigned int val=0;
++ unsigned int intenMask=0x80;
++
++ /* validate the number of interrupts supported */
++ if (int_vector >= VLYNQ_IVR_MAXIVR)
++ return VLYNQ_INVALID_ARG;
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecReg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecReg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** Clear the correct byte position and then or val **/
++ *vecReg = (*vecReg) & ( ~(intenMask << ( (int_vector %4)*8) ) );
++
++ if(enable)
++ {
++ val |= VLYNQ_IVR_INTEN_MASK;
++ /** Write to correct byte position in vecReg*/
++ *vecReg = (*vecReg) | (val << ( (int_vector % 4)*8) ) ;
++ }
++
++ return VLYNQ_SUCCESS;
++
++}/* end of function vlynq_interrupt_vector_cntl */
++
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_interrupt_vector_map()
++ * Description:Configures interrupt vector mapping alone
++ */
++int
++vlynq_interrupt_vector_map( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int int_vector,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ unsigned int bytemask=0x1f; /* mask to turn off bits corresponding to int vector */
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ /* validate the number of interrupts supported */
++ if (int_vector >= VLYNQ_IVR_MAXIVR)
++ return VLYNQ_INVALID_ARG;
++
++ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) )
++ return VLYNQ_INVALID_ARG;
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* Update the intVector<==> bit position translation table */
++ pdev->vector_map[map_vector] = int_vector;
++
++ /** val has been initialised to zero. we only have to turn on
++ * appropriate bits*/
++ val |= map_vector;
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++ return VLYNQ_SUCCESS;
++}
++
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_set_polarity()
++ * description:configures interrupt polarity .
++ */
++int
++vlynq_interrupt_set_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector,
++ VLYNQ_INTR_POLARITY pol)
++{
++ volatile unsigned int * vecreg;
++ int int_vector;
++ unsigned int val=0;
++ unsigned int bytemask=0x20; /** mask to turn off bits corresponding to int polarity */
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* val has been initialised to zero. we only have to turn on
++ * appropriate bits, if need be*/
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ if( pol == VLYNQ_INTR_ACTIVE_LOW)
++ {
++ val |= VLYNQ_IVR_INTPOL_MASK;
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++ }
++
++ return VLYNQ_SUCCESS;
++}
++
++int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ int int_vector;
++ unsigned int val=0;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return(-1);
++
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** read the information into val **/
++ val = (*vecreg) & ((VLYNQ_IVR_INTPOL_MASK << ( (int_vector %4)*8) ) );
++
++ return (val ? (VLYNQ_INTR_ACTIVE_LOW) : (VLYNQ_INTR_ACTIVE_HIGH));
++}
++
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_set_type()
++ * description:configures interrupt type .
++ */
++int vlynq_interrupt_set_type( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector,
++ VLYNQ_INTR_TYPE type)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ int int_vector;
++
++ /** mask to turn off bits corresponding to interrupt type */
++ unsigned int bytemask=0x40;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** val has been initialised to zero. we only have to turn on
++ * appropriate bits if need be*/
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ if( type == VLYNQ_INTR_PULSED)
++ {
++ val |= VLYNQ_IVR_INTTYPE_MASK;
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++ }
++
++ return VLYNQ_SUCCESS;
++}
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_get_type()
++ * description:returns interrupt type .
++ */
++int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ int int_vector;
++
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return(-1);
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** Read the correct bit position into val **/
++ val = (*vecreg) & ((VLYNQ_IVR_INTTYPE_MASK << ( (int_vector %4)*8) ) );
++
++ return (val ? (VLYNQ_INTR_PULSED) : (VLYNQ_INTR_LEVEL));
++}
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_enable()
++ * description:Enable interrupt by writing to IVR register.
++ */
++int vlynq_interrupt_enable( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ int int_vector;
++
++ /** mask to turn off bits corresponding to interrupt enable */
++ unsigned int bytemask=0x80;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** val has been initialised to zero. we only have to turn on
++ * bit corresponding to interrupt enable*/
++ val |= VLYNQ_IVR_INTEN_MASK;
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++ return VLYNQ_SUCCESS;
++}
++
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_disable()
++ * description:Disable interrupt by writing to IVR register.
++ */
++int
++vlynq_interrupt_disable( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ int int_vector;
++
++ /** mask to turn off bits corresponding to interrupt enable */
++ unsigned int bytemask=0x80;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* We disable the interrupt by simply turning off the bit
++ * corresponding to Interrupt enable.
++ * Clear the interrupt enable bit in the correct byte position **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /* Dont have to set any bit positions */
++
++ return VLYNQ_SUCCESS;
++
++}
++
++
++
++
+diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c
+--- linux.old/drivers/char/serial.c 2005-10-21 16:43:20.709226000 +0200
++++ linux.dev/drivers/char/serial.c 2005-11-10 01:10:46.015585250 +0100
+@@ -419,7 +419,40 @@
+ return 0;
+ }
+
+-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
++#if defined(CONFIG_AR7)
++
++static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
++{
++ return (inb(info->port + (offset * 4)) & 0xff);
++}
++
++
++static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset)
++{
++#ifdef CONFIG_SERIAL_NOPAUSE_IO
++ return (inb(info->port + (offset * 4)) & 0xff);
++#else
++ return (inb_p(info->port + (offset * 4)) & 0xff);
++#endif
++}
++
++static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
++{
++ outb(value, info->port + (offset * 4));
++}
++
++
++static _INLINE_ void serial_outp(struct async_struct *info, int offset,
++ int value)
++{
++#ifdef CONFIG_SERIAL_NOPAUSE_IO
++ outb(value, info->port + (offset * 4));
++#else
++ outb_p(value, info->port + (offset * 4));
++#endif
++}
++
++#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
+
+ #include <asm/mips-boards/atlas.h>
+
+@@ -478,8 +511,10 @@
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
++#ifndef CONFIG_AR7
+ #define serial_inp(info, offset) serial_in(info, offset)
+ #define serial_outp(info, offset, value) serial_out(info, offset, value)
++#endif
+
+
+ /*
+@@ -1728,7 +1763,15 @@
+ /* Special case since 134 is really 134.5 */
+ quot = (2*baud_base / 269);
+ else if (baud)
++#ifdef CONFIG_AR7
++ quot = (CONFIG_AR7_SYS*500000) / baud;
++
++ if ((quot%16)>7)
++ quot += 8;
++ quot /=16;
++#else
+ quot = baud_base / baud;
++#endif
+ }
+ /* If the quotient is zero refuse the change */
+ if (!quot && old_termios) {
+@@ -5540,8 +5583,10 @@
+ state->irq = irq_cannonicalize(state->irq);
+ if (state->hub6)
+ state->io_type = SERIAL_IO_HUB6;
++#ifndef CONFIG_AR7
+ if (state->port && check_region(state->port,8))
+ continue;
++#endif
+ #ifdef CONFIG_MCA
+ if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus)
+ continue;
+@@ -5997,7 +6042,15 @@
+ info->io_type = state->io_type;
+ info->iomem_base = state->iomem_base;
+ info->iomem_reg_shift = state->iomem_reg_shift;
++#ifdef CONFIG_AR7
++ quot = (CONFIG_AR7_SYS*500000) / baud;
++
++ if ((quot%16)>7)
++ quot += 8;
++ quot /=16;
++#else
+ quot = state->baud_base / baud;
++#endif
+ cval = cflag & (CSIZE | CSTOPB);
+ #if defined(__powerpc__) || defined(__alpha__)
+ cval >>= 8;
+diff -urN linux.old/drivers/char/ticfg/Makefile linux.dev/drivers/char/ticfg/Makefile
+--- linux.old/drivers/char/ticfg/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/ticfg/Makefile 2005-11-10 01:10:46.051587500 +0100
+@@ -0,0 +1,6 @@
++
++O_TARGET := ticfg.o
++
++obj-$(CONFIG_AR7_ADAM2) := adam2_env.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/drivers/char/ticfg/adam2_env.c linux.dev/drivers/char/ticfg/adam2_env.c
+--- linux.old/drivers/char/ticfg/adam2_env.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/ticfg/adam2_env.c 2005-11-10 01:10:46.051587500 +0100
+@@ -0,0 +1,85 @@
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/proc_fs.h>
++#include <linux/fcntl.h>
++#include <linux/init.h>
++
++#include <asm/ar7/adam2_env.h>
++
++#undef ADAM2_ENV_DEBUG
++
++#ifdef ADAM2_ENV_DEBUG
++#define DPRINTK(args...) do { printk(args); } while(0);
++#else
++#define DPRINTK(args...) do { } while(0);
++#endif
++
++#define ADAM2_ENV_DIR "ticfg"
++#define ADAM2_ENV_NAME "env"
++
++static struct proc_dir_entry *adam2_env_proc_dir;
++static struct proc_dir_entry *adam2_env_proc_ent;
++
++static int
++adam2_proc_read_env(char *page, char **start, off_t pos, int count,
++ int *eof, void *data)
++{
++ int len;
++ t_env_var *env;
++
++ if (pos > 0)
++ return 0;
++
++ len=0;
++ for (env = prom_iterenv(0); env; env = prom_iterenv(env)) {
++ if (env->val) {
++ /* XXX check for page len */
++ len += sprintf(page + len, "%s\t%s\n",
++ env->name, env->val);
++ }
++ }
++
++ *eof=1;
++ return len;
++}
++
++static int __init
++adam2_env_init(void)
++{
++
++ DPRINTK("%s\n", __FUNCTION__);
++
++ adam2_env_proc_dir = proc_mkdir(ADAM2_ENV_DIR, NULL);
++ if (!adam2_env_proc_dir) {
++ printk(KERN_ERR "%s: Unable to create /proc/%s entry\n",
++ __FUNCTION__, ADAM2_ENV_DIR);
++ return -ENOMEM;
++ }
++
++ adam2_env_proc_ent =
++ create_proc_entry(ADAM2_ENV_NAME, 0444, adam2_env_proc_dir);
++ if (!adam2_env_proc_ent) {
++ printk(KERN_ERR "%s: Unable to create /proc/%s/%s entry\n",
++ __FUNCTION__, ADAM2_ENV_DIR, ADAM2_ENV_NAME);
++ remove_proc_entry(ADAM2_ENV_DIR, NULL);
++ return -ENOMEM;
++ }
++ adam2_env_proc_ent->read_proc = adam2_proc_read_env;
++
++ return 0;
++}
++
++static
++void __exit
++adam2_env_cleanup(void)
++{
++ remove_proc_entry(ADAM2_ENV_NAME, adam2_env_proc_dir);
++ remove_proc_entry(ADAM2_ENV_DIR, NULL);
++}
++
++module_init(adam2_env_init);
++module_exit(adam2_env_cleanup);
++
++MODULE_LICENSE("GPL");
+diff -urN linux.old/include/asm-mips/addrspace.h linux.dev/include/asm-mips/addrspace.h
+--- linux.old/include/asm-mips/addrspace.h 2002-11-29 00:53:15.000000000 +0100
++++ linux.dev/include/asm-mips/addrspace.h 2005-11-10 01:14:16.400733500 +0100
+@@ -11,6 +11,8 @@
+ #ifndef __ASM_MIPS_ADDRSPACE_H
+ #define __ASM_MIPS_ADDRSPACE_H
+
++#include <linux/config.h>
++
+ /*
+ * Configure language
+ */
+@@ -102,4 +104,11 @@
+ #define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
+ #define PHYS_TO_XKPHYS(cm,a) (0x8000000000000000 | ((cm)<<59) | (a))
+
++#ifdef CONFIG_AR7_MEMORY
++#define PHYS_OFFSET ((unsigned long)(CONFIG_AR7_MEMORY))
++#else
++#define PHYS_OFFSET (0)
++#endif
++#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
++
+ #endif /* __ASM_MIPS_ADDRSPACE_H */
+diff -urN linux.old/include/asm-mips/ar7/adam2_env.h linux.dev/include/asm-mips/ar7/adam2_env.h
+--- linux.old/include/asm-mips/ar7/adam2_env.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/adam2_env.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,13 @@
++#ifndef _INCLUDE_ASM_AR7_ADAM2_ENV_H_
++#define _INCLUDE_ASM_AR7_ADAM2_ENV_H_
++
++/* Environment variable */
++typedef struct {
++ char *name;
++ char *val;
++} t_env_var;
++
++char *prom_getenv(char *);
++t_env_var *prom_iterenv(t_env_var *);
++
++#endif /* _INCLUDE_ASM_AR7_ADAM2_ENV_H_ */
+diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar7.h
+--- linux.old/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/ar7.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,33 @@
++/*
++ * $Id$
++ * Copyright (C) $Date$ $Author$
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
++ *
++ */
++
++#ifndef _AR7_H
++#define _AR7_H
++
++#include <asm/addrspace.h>
++#include <linux/config.h>
++
++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(CONFIG_AR7_MEMORY))
++
++#define AR7_UART0_REGS_BASE (KSEG1ADDR(0x08610E00))
++#define AR7_UART1_REGS_BASE (KSEG1ADDR(0x08610F00))
++#define AR7_BASE_BAUD ( 3686400 / 16 )
++
++#endif
+diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm-mips/ar7/avalanche_intc.h
+--- linux.old/include/asm-mips/ar7/avalanche_intc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_intc.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,292 @@
++ /*
++ * Nitin Dhingra, iamnd@ti.com
++ * Copyright (C) 2000 Texas Instruments Inc.
++ *
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Defines of the Sead board specific address-MAP, registers, etc.
++ *
++ */
++#ifndef _AVALANCHE_INTC_H
++#define _AVALANCHE_INTC_H
++
++#include <linux/config.h>
++
++/* ----- */
++
++#define KSEG1_BASE 0xA0000000
++#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */
++#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK)
++#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE)
++#define AVALANCHE_INTC_BASE PHYS_TO_K1(0x08612400)
++
++/* ----- */
++
++#define MIPS_EXCEPTION_OFFSET 8
++
++/******************************************************************************
++ Avalanche Interrupt number
++******************************************************************************/
++#define AVINTNUM(x) ((x) - MIPS_EXCEPTION_OFFSET)
++
++/*******************************************************************************
++*Linux Interrupt number
++*******************************************************************************/
++#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
++
++
++
++#define AVALANCHE_INT_END_PRIMARY (40 + MIPS_EXCEPTION_OFFSET)
++#define AVALANCHE_INT_END_SECONDARY (32 + MIPS_EXCEPTION_OFFSET)
++
++#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET)
++#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET)
++
++#define AVALANCHE_INTC_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \
++ AVINTNUM(AVALANCHE_INT_END_SECONDARY) + \
++ MIPS_EXCEPTION_OFFSET)
++
++#if defined(CONFIG_AR7_VLYNQ)
++#define AVALANCHE_INT_END_LOW_VLYNQ (AVALANCHE_INTC_END + 32)
++#define AVALANCHE_INT_END_VLYNQ (AVALANCHE_INTC_END + 32 * CONFIG_AR7_VLYNQ_PORTS)
++#define AVALANCHE_INT_END AVALANCHE_INT_END_VLYNQ
++#else
++#define AVALANCHE_INT_END AVALANCHE_INTC_END
++#endif
++
++
++/*
++ * Avalanche interrupt controller register base (primary)
++ */
++#define AVALANCHE_ICTRL_REGS_BASE AVALANCHE_INTC_BASE
++
++/******************************************************************************
++ * Avalanche exception controller register base (secondary)
++ ******************************************************************************/
++#define AVALANCHE_ECTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x80)
++
++
++/******************************************************************************
++ * Avalanche Interrupt pacing register base (secondary)
++ ******************************************************************************/
++#define AVALANCHE_IPACE_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0xA0)
++
++
++
++/******************************************************************************
++ * Avalanche Interrupt Channel Control register base
++ *****************************************************************************/
++#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200)
++
++
++struct avalanche_ictrl_regs /* Avalanche Interrupt control registers */
++{
++ volatile unsigned long intsr1; /* Interrupt Status/Set Register 1 0x00 */
++ volatile unsigned long intsr2; /* Interrupt Status/Set Register 2 0x04 */
++ volatile unsigned long unused1; /*0x08 */
++ volatile unsigned long unused2; /*0x0C */
++ volatile unsigned long intcr1; /* Interrupt Clear Register 1 0x10 */
++ volatile unsigned long intcr2; /* Interrupt Clear Register 2 0x14 */
++ volatile unsigned long unused3; /*0x18 */
++ volatile unsigned long unused4; /*0x1C */
++ volatile unsigned long intesr1; /* Interrupt Enable (Set) Register 1 0x20 */
++ volatile unsigned long intesr2; /* Interrupt Enable (Set) Register 2 0x24 */
++ volatile unsigned long unused5; /*0x28 */
++ volatile unsigned long unused6; /*0x2C */
++ volatile unsigned long intecr1; /* Interrupt Enable Clear Register 1 0x30 */
++ volatile unsigned long intecr2; /* Interrupt Enable Clear Register 2 0x34 */
++ volatile unsigned long unused7; /* 0x38 */
++ volatile unsigned long unused8; /* 0x3c */
++ volatile unsigned long pintir; /* Priority Interrupt Index Register 0x40 */
++ volatile unsigned long intmsr; /* Priority Interrupt Mask Index Reg 0x44 */
++ volatile unsigned long unused9; /* 0x48 */
++ volatile unsigned long unused10; /* 0x4C */
++ volatile unsigned long intpolr1; /* Interrupt Polarity Mask register 10x50 */
++ volatile unsigned long intpolr2; /* Interrupt Polarity Mask register 20x54 */
++ volatile unsigned long unused11; /* 0x58 */
++ volatile unsigned long unused12; /*0x5C */
++ volatile unsigned long inttypr1; /* Interrupt Type Mask register 10x60 */
++ volatile unsigned long inttypr2; /* Interrupt Type Mask register 20x64 */
++};
++
++struct avalanche_exctrl_regs /* Avalanche Exception control registers */
++{
++ volatile unsigned long exsr; /* Exceptions Status/Set register 0x80 */
++ volatile unsigned long reserved; /*0x84 */
++ volatile unsigned long excr; /* Exceptions Clear Register 0x88 */
++ volatile unsigned long reserved1; /*0x8c */
++ volatile unsigned long exiesr; /* Exceptions Interrupt Enable (set) 0x90 */
++ volatile unsigned long reserved2; /*0x94 */
++ volatile unsigned long exiecr; /* Exceptions Interrupt Enable(clear)0x98 */
++};
++struct avalanche_ipace_regs
++{
++
++ volatile unsigned long ipacep; /* Interrupt pacing register 0xa0 */
++ volatile unsigned long ipacemap; /*Interrupt Pacing Map Register 0xa4 */
++ volatile unsigned long ipacemax; /*Interrupt Pacing Max Register 0xa8 */
++};
++struct avalanche_channel_int_number
++{
++ volatile unsigned long cintnr0; /* Channel Interrupt Number Register0x200 */
++ volatile unsigned long cintnr1; /* Channel Interrupt Number Register0x204 */
++ volatile unsigned long cintnr2; /* Channel Interrupt Number Register0x208 */
++ volatile unsigned long cintnr3; /* Channel Interrupt Number Register0x20C */
++ volatile unsigned long cintnr4; /* Channel Interrupt Number Register0x210 */
++ volatile unsigned long cintnr5; /* Channel Interrupt Number Register0x214 */
++ volatile unsigned long cintnr6; /* Channel Interrupt Number Register0x218 */
++ volatile unsigned long cintnr7; /* Channel Interrupt Number Register0x21C */
++ volatile unsigned long cintnr8; /* Channel Interrupt Number Register0x220 */
++ volatile unsigned long cintnr9; /* Channel Interrupt Number Register0x224 */
++ volatile unsigned long cintnr10; /* Channel Interrupt Number Register0x228 */
++ volatile unsigned long cintnr11; /* Channel Interrupt Number Register0x22C */
++ volatile unsigned long cintnr12; /* Channel Interrupt Number Register0x230 */
++ volatile unsigned long cintnr13; /* Channel Interrupt Number Register0x234 */
++ volatile unsigned long cintnr14; /* Channel Interrupt Number Register0x238 */
++ volatile unsigned long cintnr15; /* Channel Interrupt Number Register0x23C */
++ volatile unsigned long cintnr16; /* Channel Interrupt Number Register0x240 */
++ volatile unsigned long cintnr17; /* Channel Interrupt Number Register0x244 */
++ volatile unsigned long cintnr18; /* Channel Interrupt Number Register0x248 */
++ volatile unsigned long cintnr19; /* Channel Interrupt Number Register0x24C */
++ volatile unsigned long cintnr20; /* Channel Interrupt Number Register0x250 */
++ volatile unsigned long cintnr21; /* Channel Interrupt Number Register0x254 */
++ volatile unsigned long cintnr22; /* Channel Interrupt Number Register0x358 */
++ volatile unsigned long cintnr23; /* Channel Interrupt Number Register0x35C */
++ volatile unsigned long cintnr24; /* Channel Interrupt Number Register0x260 */
++ volatile unsigned long cintnr25; /* Channel Interrupt Number Register0x264 */
++ volatile unsigned long cintnr26; /* Channel Interrupt Number Register0x268 */
++ volatile unsigned long cintnr27; /* Channel Interrupt Number Register0x26C */
++ volatile unsigned long cintnr28; /* Channel Interrupt Number Register0x270 */
++ volatile unsigned long cintnr29; /* Channel Interrupt Number Register0x274 */
++ volatile unsigned long cintnr30; /* Channel Interrupt Number Register0x278 */
++ volatile unsigned long cintnr31; /* Channel Interrupt Number Register0x27C */
++ volatile unsigned long cintnr32; /* Channel Interrupt Number Register0x280 */
++ volatile unsigned long cintnr33; /* Channel Interrupt Number Register0x284 */
++ volatile unsigned long cintnr34; /* Channel Interrupt Number Register0x288 */
++ volatile unsigned long cintnr35; /* Channel Interrupt Number Register0x28C */
++ volatile unsigned long cintnr36; /* Channel Interrupt Number Register0x290 */
++ volatile unsigned long cintnr37; /* Channel Interrupt Number Register0x294 */
++ volatile unsigned long cintnr38; /* Channel Interrupt Number Register0x298 */
++ volatile unsigned long cintnr39; /* Channel Interrupt Number Register0x29C */
++};
++
++struct avalanche_interrupt_line_to_channel
++{
++ unsigned long int_line0; /* Start of primary interrupts */
++ unsigned long int_line1;
++ unsigned long int_line2;
++ unsigned long int_line3;
++ unsigned long int_line4;
++ unsigned long int_line5;
++ unsigned long int_line6;
++ unsigned long int_line7;
++ unsigned long int_line8;
++ unsigned long int_line9;
++ unsigned long int_line10;
++ unsigned long int_line11;
++ unsigned long int_line12;
++ unsigned long int_line13;
++ unsigned long int_line14;
++ unsigned long int_line15;
++ unsigned long int_line16;
++ unsigned long int_line17;
++ unsigned long int_line18;
++ unsigned long int_line19;
++ unsigned long int_line20;
++ unsigned long int_line21;
++ unsigned long int_line22;
++ unsigned long int_line23;
++ unsigned long int_line24;
++ unsigned long int_line25;
++ unsigned long int_line26;
++ unsigned long int_line27;
++ unsigned long int_line28;
++ unsigned long int_line29;
++ unsigned long int_line30;
++ unsigned long int_line31;
++ unsigned long int_line32;
++ unsigned long int_line33;
++ unsigned long int_line34;
++ unsigned long int_line35;
++ unsigned long int_line36;
++ unsigned long int_line37;
++ unsigned long int_line38;
++ unsigned long int_line39;
++};
++
++
++/* Interrupt Line #'s (Sangam peripherals) */
++
++/*------------------------------*/
++/* Sangam primary interrupts */
++/*------------------------------*/
++
++#define UNIFIED_SECONDARY_INTERRUPT 0
++#define AVALANCHE_EXT_INT_0 1
++#define AVALANCHE_EXT_INT_1 2
++/* Line #3 Reserved */
++/* Line #4 Reserved */
++#define AVALANCHE_TIMER_0_INT 5
++#define AVALANCHE_TIMER_1_INT 6
++#define AVALANCHE_UART0_INT 7
++#define AVALANCHE_UART1_INT 8
++#define AVALANCHE_PDMA_INT0 9
++#define AVALANCHE_PDMA_INT1 10
++/* Line #11 Reserved */
++/* Line #12 Reserved */
++/* Line #13 Reserved */
++/* Line #14 Reserved */
++#define AVALANCHE_ATM_SAR_INT 15
++/* Line #16 Reserved */
++/* Line #17 Reserved */
++/* Line #18 Reserved */
++#define AVALANCHE_MAC0_INT 19
++/* Line #20 Reserved */
++#define AVALANCHE_VLYNQ0_INT 21
++#define AVALANCHE_CODEC_WAKE_INT 22
++/* Line #23 Reserved */
++#define AVALANCHE_USB_INT 24
++#define AVALANCHE_VLYNQ1_INT 25
++/* Line #26 Reserved */
++/* Line #27 Reserved */
++#define AVALANCHE_MAC1_INT 28
++#define AVALANCHE_I2CM_INT 29
++#define AVALANCHE_PDMA_INT2 30
++#define AVALANCHE_PDMA_INT3 31
++/* Line #32 Reserved */
++/* Line #33 Reserved */
++/* Line #34 Reserved */
++/* Line #35 Reserved */
++/* Line #36 Reserved */
++#define AVALANCHE_VDMA_VT_RX_INT 37
++#define AVALANCHE_VDMA_VT_TX_INT 38
++#define AVALANCHE_ADSLSS_INT 39
++
++/*-----------------------------------*/
++/* Sangam Secondary Interrupts */
++/*-----------------------------------*/
++#define PRIMARY_INTS 40
++
++#define EMIF_INT (7 + PRIMARY_INTS)
++
++
++extern void avalanche_int_set(int channel, int line);
++
++
++#endif /* _AVALANCHE_INTC_H */
+diff -urN linux.old/include/asm-mips/ar7/avalanche_misc.h linux.dev/include/asm-mips/ar7/avalanche_misc.h
+--- linux.old/include/asm-mips/ar7/avalanche_misc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_misc.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,174 @@
++#ifndef _AVALANCHE_MISC_H_
++#define _AVALANCHE_MISC_H_
++
++typedef enum AVALANCHE_ERR_t
++{
++ AVALANCHE_ERR_OK = 0, /* OK or SUCCESS */
++ AVALANCHE_ERR_ERROR = -1, /* Unspecified/Generic ERROR */
++
++ /* Pointers and args */
++ AVALANCHE_ERR_INVARG = -2, /* Invaild argument to the call */
++ AVALANCHE_ERR_NULLPTR = -3, /* NULL pointer */
++ AVALANCHE_ERR_BADPTR = -4, /* Bad (out of mem) pointer */
++
++ /* Memory issues */
++ AVALANCHE_ERR_ALLOC_FAIL = -10, /* allocation failed */
++ AVALANCHE_ERR_FREE_FAIL = -11, /* free failed */
++ AVALANCHE_ERR_MEM_CORRUPT = -12, /* corrupted memory */
++ AVALANCHE_ERR_BUF_LINK = -13, /* buffer linking failed */
++
++ /* Device issues */
++ AVALANCHE_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */
++ AVALANCHE_ERR_DEVICE_MALFUNC = -21, /* device malfunction */
++
++ AVALANCHE_ERR_INVID = -30 /* Invalid ID */
++
++} AVALANCHE_ERR;
++
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
++
++typedef enum AVALANCHE_RESET_MODULE_tag
++{
++ RESET_MODULE_UART0 = 0,
++ RESET_MODULE_UART1 = 1,
++ RESET_MODULE_I2C = 2,
++ RESET_MODULE_TIMER0 = 3,
++ RESET_MODULE_TIMER1 = 4,
++ RESET_MODULE_GPIO = 6,
++ RESET_MODULE_ADSLSS = 7,
++ RESET_MODULE_USBS = 8,
++ RESET_MODULE_SAR = 9,
++ RESET_MODULE_VDMA_VT = 11,
++ RESET_MODULE_FSER = 12,
++ RESET_MODULE_VLYNQ1 = 16,
++ RESET_MODULE_EMAC0 = 17,
++ RESET_MODULE_DMA = 18,
++ RESET_MODULE_BIST = 19,
++ RESET_MODULE_VLYNQ0 = 20,
++ RESET_MODULE_EMAC1 = 21,
++ RESET_MODULE_MDIO = 22,
++ RESET_MODULE_ADSLSS_DSP = 23,
++ RESET_MODULE_EPHY = 26
++} AVALANCHE_RESET_MODULE_T;
++
++typedef enum AVALANCHE_RESET_CTRL_tag
++{
++ IN_RESET = 0,
++ OUT_OF_RESET
++} AVALANCHE_RESET_CTRL_T;
++
++typedef enum AVALANCHE_SYS_RST_MODE_tag
++{
++ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */
++ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */
++} AVALANCHE_SYS_RST_MODE_T;
++
++typedef enum AVALANCHE_SYS_RESET_STATUS_tag
++{
++ HARDWARE_RESET = 0,
++ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */
++ WATCHDOG_RESET,
++ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */
++} AVALANCHE_SYS_RESET_STATUS_T;
++
++AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(AVALANCHE_RESET_MODULE_T reset_module);
++void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode);
++AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status(void);
++
++typedef int (*REMOTE_VLYNQ_DEV_RESET_CTRL_FN)(unsigned int reset_module, AVALANCHE_RESET_CTRL_T reset_ctrl);
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++
++typedef enum AVALANCHE_POWER_CTRL_tag
++{
++ POWER_CTRL_POWER_UP = 0,
++ POWER_CTRL_POWER_DOWN
++} AVALANCHE_POWER_CTRL_T;
++
++typedef enum AVALANCHE_SYS_POWER_MODE_tag
++{
++ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */
++ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */
++ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */
++ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */
++} AVALANCHE_SYS_POWER_MODE_T;
++
++void avalanche_power_ctrl(unsigned int power_module, AVALANCHE_POWER_CTRL_T power_ctrl);
++AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int power_module);
++void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode);
++AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void);
++
++/*****************************************************************************
++ * Wakeup Control
++ *****************************************************************************/
++
++typedef enum AVALANCHE_WAKEUP_INTERRUPT_tag
++{
++ WAKEUP_INT0 = 1,
++ WAKEUP_INT1 = 2,
++ WAKEUP_INT2 = 4,
++ WAKEUP_INT3 = 8
++} AVALANCHE_WAKEUP_INTERRUPT_T;
++
++typedef enum TNETV1050_WAKEUP_CTRL_tag
++{
++ WAKEUP_DISABLED = 0,
++ WAKEUP_ENABLED
++} AVALANCHE_WAKEUP_CTRL_T;
++
++typedef enum TNETV1050_WAKEUP_POLARITY_tag
++{
++ WAKEUP_ACTIVE_HIGH = 0,
++ WAKEUP_ACTIVE_LOW
++} AVALANCHE_WAKEUP_POLARITY_T;
++
++void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
++ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl,
++ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity);
++
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
++
++typedef enum AVALANCHE_GPIO_PIN_MODE_tag
++{
++ FUNCTIONAL_PIN = 0,
++ GPIO_PIN = 1
++} AVALANCHE_GPIO_PIN_MODE_T;
++
++typedef enum AVALANCHE_GPIO_PIN_DIRECTION_tag
++{
++ GPIO_OUTPUT_PIN = 0,
++ GPIO_INPUT_PIN = 1
++} AVALANCHE_GPIO_PIN_DIRECTION_T;
++
++typedef enum { GPIO_FALSE, GPIO_TRUE } AVALANCHE_GPIO_BOOL_T;
++
++void avalanche_gpio_init(void);
++int avalanche_gpio_ctrl(unsigned int gpio_pin,
++ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
++int avalanche_gpio_ctrl_with_link_count(unsigned int gpio_pin,
++ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
++int avalanche_gpio_out_bit(unsigned int gpio_pin, int value);
++int avalanche_gpio_in_bit(unsigned int gpio_pin);
++int avalanche_gpio_out_value(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
++int avalanche_gpio_out_value_with_link_count(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
++int avalanche_gpio_in_value(unsigned int *in_val, unsigned int reg_index);
++
++unsigned int avalanche_get_chip_version_info(void);
++
++unsigned int avalanche_get_vbus_freq(void);
++void avalanche_set_vbus_freq(unsigned int);
++
++
++typedef int (*SET_MDIX_ON_CHIP_FN_T)(unsigned int base_addr, unsigned int operation);
++int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation);
++unsigned int avalanche_is_mdix_on_chip(void);
++
++#endif
+diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm-mips/ar7/avalanche_regs.h
+--- linux.old/include/asm-mips/ar7/avalanche_regs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_regs.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,567 @@
++/*
++ * $Id$
++ * Avalanche Register Descriptions
++ *
++ * Jeff Harrell, jharrell@ti.com
++ * 2000 (c) Texas Instruments Inc.
++ */
++
++#ifndef __AVALANCHE_REGS_H
++#define __AVALANCHE_REGS_H
++
++#include <asm/addrspace.h>
++#include <linux/config.h>
++
++/*----------------------------------------*/
++/* Base offsets within the Avalanche ASIC */
++/*----------------------------------------*/
++
++#define BBIF_SPACE0 (KSEG1ADDR(0x01000000))
++#define BBIF_SPACE1 (KSEG1ADDR(0x01800000))
++#define BBIF_CONTROL (KSEG1ADDR(0x02000000))
++#define ATM_SAR_BASE (KSEG1ADDR(0x03000000))
++#define USB_MCU_BASE (KSEG1ADDR(0x03400000))
++#define DES_BASE (KSEG1ADDR(0x08600000))
++#define ETH_MACA_BASE (KSEG1ADDR(0x08610000))
++#define ETH_MACB_BASE (KSEG1ADDR(0x08612800))
++#define MEM_CTRLR_BASE (KSEG1ADDR(0x08610800))
++#define GPIO_BASE (KSEG1ADDR(0x08610900))
++#define CLK_CTRL_BASE (KSEG1ADDR(0x08610A00))
++#define WATCH_DOG_BASE (KSEG1ADDR(0x08610B00))
++#define TMR1_BASE (KSEG1ADDR(0x08610C00))
++#define TRM2_BASE (KSEG1ADDR(0x08610D00))
++#define UARTA_BASE (KSEG1ADDR(0x08610E00))
++#define UARTB_BASE (KSEG1ADDR(0x08610F00))
++#define I2C_BASE (KSEG1ADDR(0x08611000))
++#define DEV_ID_BASE (KSEG1ADDR(0x08611100))
++#define USB_BASE (KSEG1ADDR(0x08611200))
++#define PCI_CONFIG_BASE (KSEG1ADDR(0x08611300))
++#define DMA_BASE (KSEG1ADDR(0x08611400))
++#define RESET_CTRL_BASE (KSEG1ADDR(0x08611600))
++#define DSL_IF_BASE (KSEG1ADDR(0x08611B00))
++#define INT_CTL_BASE (KSEG1ADDR(0x08612400))
++#define PHY_BASE (KSEG1ADDR(0x1E000000))
++
++/*---------------------------------*/
++/* Device ID, chip version number */
++/*---------------------------------*/
++
++#define AVALANCHE_CHVN (*(volatile unsigned int *)(DEV_ID_BASE+0x14))
++#define AVALANCHE_DEVID1 (*(volatile unsigned int *)(DEV_ID_BASE+0x18))
++#define AVALANCHE_DEVID2 (*(volatile unsigned int *)(DEV_ID_BASE+0x1C))
++
++/*----------------------------------*/
++/* Reset Control VW changed to ptrs */
++/*----------------------------------*/
++
++#define AVALANCHE_PRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x0)) /* Peripheral reset control */
++#define AVALANCHE_SWRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x4)) /* Software reset control */
++#define AVALANCHE_RSR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x8)) /* Reset status register */
++
++/* reset control bits */
++
++#define AV_RST_UART0 (1<<0) /* Brings UART0 out of reset */
++#define AV_RST_UART1 (1<<1) /* Brings UART1 out of reset */
++#define AV_RST_IICM (1<<2) /* Brings the I2CM out of reset */
++#define AV_RST_TIMER0 (1<<3) /* Brings Timer 0 out of reset */
++#define AV_RST_TIMER1 (1<<4) /* Brings Timer 1 out of reset */
++#define AV_RST_DES (1<<5) /* Brings the DES module out of reset */
++#define AV_RST_GPIO (1<<6) /* Brings the GPIO module out of reset (see note below) */
++/*
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++ If you reset the GPIO interface all of the directions (i/o) of the UART B
++ interface pins are inputs and must be reconfigured so as not to lose the
++ serial console interface
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++*/
++#define AV_RST_BBIF (1<<7) /* Brings the Broadband interface out of reset */
++#define AV_RST_USB (1<<8) /* Brings the USB module out of reset */
++#define AV_RST_SAR (1<<9) /* Brings the SAR out of reset */
++#define AV_RST_HDLC (1<<10) /* Brings the HDLC module out of reset */
++#define AV_RST_PCI (1<<16) /* Brings the PCI module out of reset */
++#define AV_RST_ETH_MAC0 (1<<17) /* Brings the Ethernet MAC0 out of reset */
++#define AV_RST_PICO_DMA (1<<18) /* Brings the PICO DMA module out of reset */
++#define AV_RST_BIST (1<<19) /* Brings the BIST module out of reset */
++#define AV_RST_DSP (1<<20) /* Brings the DSP sub system out of reset */
++#define AV_RST_ETH_MAC1 (1<<21) /* Brings the Ethernet MAC1 out of reset */
++
++/*----------------------*/
++/* Physical interfaces */
++/*----------------------*/
++
++/* Phy loopback */
++#define PHY_LOOPBACK 1
++
++
++/* Phy 0 */
++#define PHY0BASE (PHY_BASE)
++#define PHY0RST (*(volatile unsigned char *) (PHY0BASE)) /* reset */
++#define PHY0CTRL (*(volatile unsigned char *) (PHY0BASE+0x5)) /* control */
++#define PHY0RACPCTRL (*(volatile unsigned char *) (PHY0BASE+0x50)) /* RACP control/status */
++#define PHY0TACPCTRL (*(volatile unsigned char *) (PHY0BASE+0x60)) /* TACP idle/unassigned cell hdr */
++#define PHY0RACPINT (*(volatile unsigned char *) (PHY0BASE+0x51)) /* RACP interrupt enable/Status */
++
++
++/* Phy 1 */
++
++#define PHY1BASE (PHY_BASE + 0x100000)
++#define PHY1RST (*(volatile unsigned char *) (PHY1BASE)) /* reset */
++#define PHY1CTRL (*(volatile unsigned char *) (PHY1BASE+0x5)) /* control */
++#define PHY1RACPCTRL (*(volatile unsigned char *) (PHY1BASE+0x50))
++#define PHY1TACPCTRL (*(volatile unsigned char *) (PHY1BASE+0x60))
++#define PHY1RACPINT (*(volatile unsigned char *) (PHY1BASE+0x51))
++
++/* Phy 2 */
++
++#define PHY2BASE (PHY_BASE + 0x200000)
++#define PHY2RST (*(volatile unsigned char *) (PHY2BASE)) /* reset */
++#define PHY2CTRL (*(volatile unsigned char *) (PHY2BASE+0x5)) /* control */
++#define PHY2RACPCTRL (*(volatile unsigned char *) (PHY2BASE+0x50))
++#define PHY2TACPCTRL (*(volatile unsigned char *) (PHY2BASE+0x60))
++#define PHY2RACPINT (*(volatile unsigned char *) (PHY2BASE+0x51))
++
++/*-------------------*/
++/* Avalanche ATM SAR */
++/*-------------------*/
++
++#define AVSAR_SYSCONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000000)) /* SAR system config register */
++#define AVSAR_SYSSTATUS (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000004)) /* SAR system status register */
++#define AVSAR_INT_ENABLE (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000008)) /* SAR interrupt enable register */
++#define AVSAR_CONN_VPI_VCI (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000000c)) /* VPI/VCI connection config */
++#define AVSAR_CONN_CONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000010)) /* Connection config register */
++#define AVSAR_OAM_CONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018)) /* OAM configuration register */
++
++/* Transmit completion ring registers */
++
++#define AVSAR_TCRAPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000100))
++#define AVSAR_TCRASIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000104))
++#define AVSAR_TCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000108))
++#define AVSAR_TCRATOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000010c))
++#define AVSAR_TCRAFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000110))
++#define AVSAR_TCRAPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000114))
++#define AVSAR_TCRAENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000118))
++#define AVSAR_TCRBPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000011c))
++#define AVSAR_TCRBSIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000120))
++#define AVSAR_TCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000124))
++#define AVSAR_TCRBTOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000128))
++#define AVSAR_TCRBFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000012c))
++#define AVSAR_TCRBPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000130))
++#define AVSAR_TCRBENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000134))
++
++/* Transmit Queue Packet registers */
++#define AVSAR_TXQUEUE_PKT0 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000140))
++#define AVSAR_TXQUEUE_PKT1 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000144))
++#define AVSAR_TXQUEUE_PKT2 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000148))
++#define AVSAR_TX_FLUSH (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000014C))
++/* Receive completion ring registers */
++
++#define AVSAR_RCRAPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000200))
++#define AVSAR_RCRASIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000204))
++#define AVSAR_RCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000208))
++#define AVSAR_RCRATOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000020c))
++#define AVSAR_RCRAFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000210))
++#define AVSAR_RCRAPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000214))
++#define AVSAR_RCRAENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000218))
++#define AVSAR_RCRBPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000021c))
++#define AVSAR_RCRBSIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000220))
++#define AVSAR_RCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000224))
++#define AVSAR_RCRBTOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000228))
++#define AVSAR_RCRBFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000022c))
++#define AVSAR_RCRBPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000230))
++#define AVSAR_RCRBENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000234))
++
++#define AVSAR_RXFBL_ADD0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000240)) /* Rx Free buffer list add 0 */
++#define AVSAR_RXFBL_ADD1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000244)) /* Rx Free buffer list add 1 */
++#define AVSAR_RXFBL_ADD2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000248)) /* Rx Free buffer list add 2 */
++#define AVSAR_RXFBLSIZE_0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000028c)) /* Rx Free buffer list size 0 */
++#define AVSAR_RXFBLSIZE_1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000029c)) /* Rx Free buffer list size 1 */
++#define AVSAR_RXFBLSIZE_2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002ac)) /* Rx Free buffer list size 2 */
++#define AVSAR_RXFBLSIZE_3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002bc)) /* Rx Free buffer list size 3 */
++
++
++#if defined(CONFIG_MIPS_EVM3D) || defined(CONFIG_MIPS_AR5D01) || defined(CONFIG_MIPS_AR5W01)
++
++#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010480))
++#define AVSAR_OAM_CC_SINK (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010484))
++#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010488))
++#define AVSAR_OAM_CPID0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E0))
++#define AVSAR_OAM_LLID0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F0))
++#define AVSAR_OAM_CPID1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E4))
++#define AVSAR_OAM_LLID1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F4))
++#define AVSAR_OAM_CPID2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E8))
++#define AVSAR_OAM_LLID2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F8))
++#define AVSAR_OAM_CPID3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104EC))
++#define AVSAR_OAM_LLID3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104FC))
++#define AVSAR_OAM_CORR_TAG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010500))
++#define AVSAR_OAM_FAR_COUNT (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010520))
++#define AVSAR_OAM_NEAR_COUNT (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010540))
++#define AVSAR_OAM_CONFIG_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018))
++#define AVSAR_FAIRNESS_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104B8))
++#define AVSAR_UBR_PCR_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010490))
++
++
++/*
++
++#define OAM_CPID_ADD 0xa30104e0
++
++#define OAM_LLID_ADD 0xa30104f0
++
++#define OAM_LLID_VAL 0xffffffff
++
++#define OAM_CORR_TAG 0xa3010500
++
++#define OAM_FAR_COUNT_ADD 0xa3010520
++
++#define OAM_NEAR_COUNT_ADD 0xa3010540
++
++#define OAM_CONFIG_REG_ADD 0xa3000018
++*/
++
++
++#else /* CONFIG_MIPS_EVM3 || CONFIG_MIPS_ACPEP */
++
++#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012000))
++#define AVSAR_OAM_CC_SINK (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012004))
++#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012008))
++#define AVSAR_OAM_CPID (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012300))
++
++#endif /* CONFIG_MIPS_EVM3D || CONFIG_MIPS_AR5D01 || CONFIG_MIPS_AR5W01 */
++
++
++#define AVSAR_STATE_RAM (ATM_SAR_BASE + 0x010000) /* SAR state RAM */
++#define AVSAR_PDSP_BASE (ATM_SAR_BASE + 0x020000) /* SAR PDSP base address */
++#define AVSAR_TXDMA_BASE (ATM_SAR_BASE + 0x030000) /* Transmit DMA state base */
++#define AVSAR_TDMASTATE6 0x18 /* Transmit DMA state word 6 */
++#define AVSAR_RXDMA_BASE (ATM_SAR_BASE + 0x040000) /* Receive DMA state base */
++#define AVSAR_RDMASTATE0 0x0 /* Receive DMA state word 0 */
++
++/*------------------------------------------*/
++/* DSL Interface */
++/*------------------------------------------*/
++
++#define AVDSL_TX_EN (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000000))
++#define AVDSL_RX_EN (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000004))
++#define AVDSL_POLL (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000008))
++
++/* Fast */
++
++#define AVDSL_TX_FIFO_ADDR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000000C))
++#define AVDSL_TX_FIFO_BASE0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000010))
++#define AVDSL_TX_FIFO_LEN0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000014))
++#define AVDSL_TX_FIFO_PR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000018))
++#define AVDSL_RX_FIFO_ADDR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000001C))
++#define AVDSL_RX_FIFO_BASE0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000020))
++#define AVDSL_RX_FIFO_LEN0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000024))
++#define AVDSL_RX_FIFO_PR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000028))
++
++/* Interleaved */
++
++#define AVDSL_TX_FIFO_ADDR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000002C))
++#define AVDSL_TX_FIFO_BASE1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000030))
++#define AVDSL_TX_FIFO_LEN1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000034))
++#define AVDSL_TX_FIFO_PR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000038))
++#define AVDSL_RX_FIFO_ADDR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000003C))
++#define AVDSL_RX_FIFO_BASE1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000040))
++#define AVDSL_RX_FIFO_LEN1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000044))
++#define AVDSL_RX_FIFO_PR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000048))
++
++/*------------------------------------------*/
++/* Broadband I/F */
++/*------------------------------------------*/
++
++#define AVBBIF_BBIF_CNTRL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000000))
++#define AVBBIF_ADDR_TRANS_0 (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000004))
++#define AVBBIF_ADDR_TRANS_1 (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000008))
++#define AVBBIF_ADDR_XB_MX_BL (*(volatile unsigned int *)(BBIF_CONTROL + 0x0000000C))
++#define AVBBIF_INFIFO_LVL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000010))
++#define AVBBIF_OUTFIFO_LVL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000014))
++
++#define AVBBIF_DISABLED 0x0
++#define AVBBIF_LBT4040_INT 0x1
++#define AVBBIF_XBUS 0x2
++#define AVBBIF_LBT4040_EXT 0x4
++
++#define AVBBIF_ADDR_MASK0 0xff000000 /* handles upper bits of BBIF 0 address */
++#define AVBBIF_ADDR_MASK1 0xff800000 /* handles upper bits of BBIF 1 address */
++#define AVBBIF_TRANS_MASK 0xff000000
++/*------------------------------------------*/
++/* GPIO I/F */
++/*------------------------------------------*/
++
++#define GPIO_DATA_INPUT (*(volatile unsigned int *)(GPIO_BASE + 0x00000000))
++#define GPIO_DATA_OUTPUT (*(volatile unsigned int *)(GPIO_BASE + 0x00000004))
++#define GPIO_DATA_DIR (*(volatile unsigned int *)(GPIO_BASE + 0x00000008)) /* 0=output 1=input */
++#define GPIO_DATA_ENABLE (*(volatile unsigned int *)(GPIO_BASE + 0x0000000C)) /* 0=GPIO Mux 1=GPIO */
++
++#define GPIO_0 (1<<21)
++#define GPIO_1 (1<<22)
++#define GPIO_2 (1<<23)
++#define GPIO_3 (1<<24)
++#define EINT_1 (1<<18)
++
++/*
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++ If you reset the GPIO interface all of the directions (i/o) of the UART B
++ interface pins are inputs and must be reconfigured so as not to lose the
++ serial console interface
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++*/
++
++/*------------------------------------------*/
++/* CLK_CTRL */
++/*------------------------------------------*/
++#define PERIPH_CLK_CTL (*(volatile unsigned int *)(CLK_CTRL_BASE + 0x00000004))
++
++#define PCLK_0_HALF_VBUS (0<<16)
++#define PCLK_EQ_INPUT (1<<16)
++#define BBIF_CLK_HALF_VBUS (0<<17)
++#define BBIF_CLK_EQ_VBUS (1<<17)
++#define BBIF_CLK_EQ_BBCLK (3<<17)
++#define DSP_MODCLK_DSPCLKI (0<<20)
++#define DSP_MODCLK_REFCLKI (1<<20)
++#define USB_CLK_EQ_USBCLKI (0<<21)
++#define USB_CLK_EQ_REFCLKI (1<<21)
++
++/*------------------------------------------*/
++/* PCI Control Registers */
++/*------------------------------------------*/
++#define PCIC_CONTROL (*(volatile unsigned int *)(PCI_CONFIG_BASE))
++#define PCIC_CONTROL_CFG_DONE (1<<0)
++#define PCIC_CONTROL_DIS_SLAVE_TO (1<<1)
++#define PCIC_CONTROL_FORCE_DELAY_READ (1<<2)
++#define PCIC_CONTROL_FORCE_DELAY_READ_LINE (1<<3)
++#define PCIC_CONTROL_FORCE_DELAY_READ_MULT (1<<4)
++#define PCIC_CONTROL_MEM_SPACE_EN (1<<5)
++#define PCIC_CONTROL_MEM_MASK (1<<6)
++#define PCIC_CONTROL_IO_SPACE_EN (1<<7)
++#define PCIC_CONTROL_IO_MASK (1<<8)
++/* PCIC_CONTROL_RESERVED (1<<9) */
++#define PCIC_CONTROL_BASE0_EN (1<<10)
++#define PCIC_CONTROL_BASE1_EN (1<<11)
++#define PCIC_CONTROL_BASE2_EN (1<<12)
++#define PCIC_CONTROL_HOLD_MASTER_WRITE (1<<13)
++#define PCIC_CONTROL_ARBITER_EN (1<<14)
++#define PCIC_INT_SOURCE (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000004))
++#define PCIC_INT_SOURCE_PWR_MGMT (1<<0)
++#define PCIC_INT_SOURCE_PCI_TARGET (1<<1)
++#define PCIC_INT_SOURCE_PCI_MASTER (1<<2)
++#define PCIC_INT_SOURCE_POWER_WAKEUP (1<<3)
++#define PCIC_INT_SOURCE_PMEIN (1<<4)
++/* PCIC_INT_SOURCE_RESERVED (1<<5) */
++/* PCIC_INT_SOURCE_RESERVED (1<<6) */
++#define PCIC_INT_SOURCE_PIC_INTA (1<<7)
++#define PCIC_INT_SOURCE_PIC_INTB (1<<8)
++#define PCIC_INT_SOURCE_PIC_INTC (1<<9)
++#define PCIC_INT_SOURCE_PIC_INTD (1<<10)
++#define PCIC_INT_SOURCE_SOFT_INT0 (1<<11)
++#define PCIC_INT_SOURCE_SOFT_INT1 (1<<12)
++#define PCIC_INT_SOURCE_SOFT_INT2 (1<<13)
++#define PCIC_INT_SOURCE_SOFT_INT3 (1<<14)
++#define PCIC_INT_CLEAR (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000008))
++#define PCIC_INT_CLEAR_PM (1<<0)
++#define PCIC_INT_CLEAR_PCI_TARGET (1<<1)
++#define PCIC_INT_CLEAR_PCI_MASTER (1<<2)
++/* PCIC_INT_CLEAR_RESERVED (1<<3) */
++#define PCIC_INT_CLEAR_PMEIN (1<<4)
++/* PCIC_INT_CLEAR_RESERVED (1<<5) */
++/* PCIC_INT_CLEAR_RESERVED (1<<6) */
++#define PCIC_INT_CLEAR_PCI_INTA (1<<7)
++#define PCIC_INT_CLEAR_PCI_INTB (1<<8)
++#define PCIC_INT_CLEAR_PCI_INTC (1<<9)
++#define PCIC_INT_CLEAR_PCI_INTD (1<<10)
++#define PCIC_INT_CLEAR_SOFT_INT0 (1<<11)
++#define PCIC_INT_CLEAR_SOFT_INT1 (1<<12)
++#define PCIC_INT_CLEAR_SOFT_INT2 (1<<13)
++#define PCIC_INT_CLEAR_SOFT_INT3 (1<<14)
++#define PCIC_INT_EN_AVAL (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000000c))
++#define PCIC_INT_EN_AVAL_PM (1<<0)
++#define PCIC_INT_EN_AVAL_PCI_TARGET (1<<1)
++#define PCIC_INT_EN_AVAL_PCI_MASTER (1<<2)
++/* PCIC_INT_EN_AVAL_RESERVED (1<<3) */
++#define PCIC_INT_EN_AVAL_PMEIN (1<<4)
++/* PCIC_INT_EN_AVAL_RESERVED (1<<5) */
++/* PCIC_INT_EN_AVAL_RESERVED (1<<6) */
++#define PCIC_INT_EN_AVAL_PCI_INTA (1<<7)
++#define PCIC_INT_EN_AVAL_PCI_INTB (1<<8)
++#define PCIC_INT_EN_AVAL_PCI_INTC (1<<9)
++#define PCIC_INT_EN_AVAL_PCI_INTD (1<<10)
++#define PCIC_INT_EN_AVAL_SOFT_INT0 (1<<11)
++#define PCIC_INT_EN_AVAL_SOFT_INT1 (1<<12)
++#define PCIC_INT_EN_AVAL_SOFT_INT2 (1<<13)
++#define PCIC_INT_EN_AVAL_SOFT_INT3 (1<<14)
++#define PCIC_INT_EN_PCI (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000010))
++#define PCIC_INT_EN_PCI_PM (1<<0)
++#define PCIC_INT_EN_PCI_PCI_TARGET (1<<1)
++#define PCIC_INT_EN_PCI_PCI_MASTER (1<<2)
++/* PCIC_INT_EN_PCI_RESERVED (1<<3) */
++#define PCIC_INT_EN_PCI_PMEIN (1<<4)
++/* PCIC_INT_EN_PCI_RESERVED (1<<5) */
++/* PCIC_INT_EN_PCI_RESERVED (1<<6) */
++#define PCIC_INT_EN_PCI_PCI_INTA (1<<7)
++#define PCIC_INT_EN_PCI_PCI_INTB (1<<8)
++#define PCIC_INT_EN_PCI_PCI_INTC (1<<9)
++#define PCIC_INT_EN_PCI_PCI_INTD (1<<10)
++#define PCIC_INT_EN_PCI_SOFT_INT0 (1<<11)
++#define PCIC_INT_EN_PCI_SOFT_INT1 (1<<12)
++#define PCIC_INT_EN_PCI_SOFT_INT2 (1<<13)
++#define PCIC_INT_EN_PCI_SOFT_INT3 (1<<14)
++#define PCIC_INT_SWSET (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000014))
++#define PCIC_INT_SWSET_SOFT_INT0 (1<<0)
++#define PCIC_INT_SWSET_SOFT_INT1 (1<<1)
++#define PCIC_INT_SWSET_SOFT_INT2 (1<<2)
++#define PCIC_INT_SWSET_SOFT_INT3 (1<<3)
++#define PCIC_PM_CTL (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000018))
++#define PCIC_PM_CTL_PWR_STATE_MASK (0x02)
++/* PCIC_PM_CTL_RESERVED (1<<2) */
++/* PCIC_PM_CTL_RESERVED (1<<3) */
++/* PCIC_PM_CTL_RESERVED (1<<4) */
++/* PCIC_PM_CTL_RESERVED (1<<5) */
++/* PCIC_PM_CTL_RESERVED (1<<6) */
++/* PCIC_PM_CTL_RESERVED (1<<7) */
++/* PCIC_PM_CTL_RESERVED (1<<8) */
++/* PCIC_PM_CTL_RESERVED (1<<9) */
++#define PCIC_PM_CTL_PWR_SUPPORT (1<<10)
++#define PCIC_PM_CTL_PMEIN (1<<11)
++#define PCIC_PM_CTL_CAP_MASK (*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x0000001a))
++#define PCIC_PM_CONSUME (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000001c))
++#define PCIC_PM_CONSUME_D0 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001c))
++#define PCIC_PM_CONSUME_D1 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001d))
++#define PCIC_PM_CONSUME_D2 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001e))
++#define PCIC_PM_CONSUME_D3 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001f))
++#define PCIC_PM_DISSAPATED (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000020))
++#define PCIC_PM_DISSAPATED_D0 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000020))
++#define PCIC_PM_DISSAPATED_D1 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000021))
++#define PCIC_PM_DISSAPATED_D2 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000022))
++#define PCIC_PM_DISSAPATED_D3 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000023))
++#define PCIC_PM_DATA_SCALE (*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x00000024))
++#define PCIC_VEND_DEV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000028))
++#define PCIC_SUB_VEND_DEV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000002c))
++#define PCIC_CLASS_REV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000030))
++#define PCIC_MAX_MIN (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000034))
++#define PCIC_MAST_MEM_AT0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000003c))
++#define PCIC_MAST_MEM_AT1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000040))
++#define PCIC_MAST_MEM_AT2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000044))
++#define PCIC_SLAVE_MASK0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000004c))
++#define PCIC_SLAVE_MASK1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000050))
++#define PCIC_SLAVE_MASK2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000054))
++#define PCIC_SLAVE_BASE_AT0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000058))
++#define PCIC_SLAVE_BASE_AT1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000005c))
++#define PCIC_SLAVE_BASE_AT2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000060))
++#define PCIC_CONF_COMMAND (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000090))
++#define PCIC_CONF_ADDR (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000094))
++#define PCIC_CONF_DATA (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000098))
++
++/*------------------------------------------*/
++/* IIC_INTERFACE */
++/*------------------------------------------*/
++#define I2C_DATA_HI (*(volatile unsigned int *)(I2C_BASE + 0x0))
++#define I2C_DATA_LOW (*(volatile unsigned int *)(I2C_BASE + 0x4))
++#define I2C_CONFIG (*(volatile unsigned int *)(I2C_BASE + 0x8))
++#define I2C_DATA_READ (*(volatile unsigned int *)(I2C_BASE + 0xC))
++#define I2C_CLOCK_DIV (*(volatile unsigned int *)(I2C_BASE + 0x10))
++
++#define I2CWRITE 0x200
++#define I2CREAD 0x300
++#define I2C_END_BURST 0x400
++
++/* read bits */
++#define I2C_READ_ERROR 0x8000
++#define I2C_READ_COMPLETE 0x4000
++#define I2C_READ_BUSY 0x2000
++
++/* device types */
++#define I2C_IO_EXPANDER 0x2
++#define I2C_RTC 0xd
++
++/* device Addresses on I2C bus (EVM3) */
++#define SEVEN_SEGMENT_DISP 0x23 /* Device type = 0x2, Addr = 3 */
++#define EVM3_RTC 0xd0 /* Device type = 0xd, Addr = 0 */
++#define EVM3_RTC_I2C_ADDR 0x0
++
++/*------------------------------------------*/
++/* Ethernet MAC register offset definitions */
++/*------------------------------------------*/
++#define VMAC_DMACONFIG(X) (*(volatile unsigned int *)(X + 0x00000000))
++#define VMAC_INTSTS(X) (*(volatile unsigned int *)(X + 0x00000004))
++#define VMAC_INTMASK(X) (*(volatile unsigned int *)(X + 0x00000008))
++
++#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340))
++#define VMAC_STATSBASE(X) (*(volatile unsigned int *)(X + 0x00000400))
++
++#define VMAC_TCRPTR(X) (*(volatile unsigned int *)(X + 0x00000100))
++#define VMAC_TCRSIZE(X) (*(volatile unsigned int *)(X + 0x00000104))
++#define VMAC_TCRINTTHRESH(X) (*(volatile unsigned int *)(X + 0x00000108))
++#define VMAC_TCRTOTENT(X) (*(volatile unsigned int *)(X + 0x0000010C))
++#define VMAC_TCRFREEENT(X) (*(volatile unsigned int *)(X + 0x00000110))
++#define VMAC_TCRPENDENT(X) (*(volatile unsigned int *)(X + 0x00000114))
++#define VMAC_TCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000118))
++#define VMAC_TXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000011c))
++
++
++#define VMAC_TDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000120))
++#define VMAC_TDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000124))
++#define VMAC_TDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000128))
++#define VMAC_TDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000012C))
++#define VMAC_TDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000130))
++#define VMAC_TDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000134))
++#define VMAC_TDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000138))
++#define VMAC_TDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000013C))
++#define VMAC_TXPADDCNT(X) (*(volatile unsigned int *)(X + 0x00000140))
++#define VMAC_TXPADDSTART(X) (*(volatile unsigned int *)(X + 0x00000144))
++#define VMAC_TXPADDEND(X) (*(volatile unsigned int *)(X + 0x00000148))
++#define VMAC_TXQFLUSH(X) (*(volatile unsigned int *)(X + 0x0000014C))
++
++#define VMAC_RCRPTR(X) (*(volatile unsigned int *)(X + 0x00000200))
++#define VMAC_RCRSIZE(X) (*(volatile unsigned int *)(X + 0x00000204))
++#define VMAC_RCRINTTHRESH(X) (*(volatile unsigned int *)(X + 0x00000208))
++#define VMAC_RCRTOTENT(X) (*(volatile unsigned int *)(X + 0x0000020C))
++#define VMAC_RCRFREEENT(X) (*(volatile unsigned int *)(X + 0x00000210))
++#define VMAC_RCRPENDENT(X) (*(volatile unsigned int *)(X + 0x00000214))
++#define VMAC_RCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000218))
++#define VMAC_RXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000021c))
++
++#define VMAC_RDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000220))
++#define VMAC_RDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000224))
++#define VMAC_RDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000228))
++#define VMAC_RDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000022C))
++#define VMAC_RDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000230))
++#define VMAC_RDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000234))
++#define VMAC_RDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000238))
++#define VMAC_RDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000023C))
++#define VMAC_FBLADDCNT(X) (*(volatile unsigned int *)(X + 0x00000240))
++#define VMAC_FBLADDSTART(X) (*(volatile unsigned int *)(X + 0x00000244))
++#define VMAC_FBLADDEND(X) (*(volatile unsigned int *)(X + 0x00000248))
++#define VMAC_RXONOFF(X) (*(volatile unsigned int *)(X + 0x0000024C))
++
++#define VMAC_FBL0NEXTD(X) (*(volatile unsigned int *)(X + 0x00000280))
++#define VMAC_FBL0LASTD(X) (*(volatile unsigned int *)(X + 0x00000284))
++#define VMAC_FBL0COUNTD(X) (*(volatile unsigned int *)(X + 0x00000288))
++#define VMAC_FBL0BUFSIZE(X) (*(volatile unsigned int *)(X + 0x0000028C))
++
++#define VMAC_MACCONTROL(X) (*(volatile unsigned int *)(X + 0x00000300))
++#define VMAC_MACSTATUS(X) (*(volatile unsigned int *)(X + 0x00000304))
++#define VMAC_MACADDRHI(X) (*(volatile unsigned int *)(X + 0x00000308))
++#define VMAC_MACADDRLO(X) (*(volatile unsigned int *)(X + 0x0000030C))
++#define VMAC_MACHASH1(X) (*(volatile unsigned int *)(X + 0x00000310))
++#define VMAC_MACHASH2(X) (*(volatile unsigned int *)(X + 0x00000314))
++
++#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340))
++#define VMAC_BOFTEST(X) (*(volatile unsigned int *)(X + 0x00000344))
++#define VMAC_PACTEST(X) (*(volatile unsigned int *)(X + 0x00000348))
++#define VMAC_PAUSEOP(X) (*(volatile unsigned int *)(X + 0x0000034C))
++
++#define VMAC_MDIOCONTROL(X) (*(volatile unsigned int *)(X + 0x00000380))
++#define VMAC_MDIOUSERACCESS(X) (*(volatile unsigned int *)(X +0x00000384))
++#define VMAC_MDIOACK(X) (*(volatile unsigned int *)(X + 0x00000388))
++#define VMAC_MDIOLINK(X) (*(volatile unsigned int *)(X + 0x0000038C))
++#define VMAC_MDIOMACPHY(X) (*(volatile unsigned int *)(X + 0x00000390))
++
++#define VMAC_STATS_BASE(X) (X + 0x00000400)
++
++#endif __AVALANCHE_REGS_H
++
++
++
++
++
++
+diff -urN linux.old/include/asm-mips/ar7/avalanche_types.h linux.dev/include/asm-mips/ar7/avalanche_types.h
+--- linux.old/include/asm-mips/ar7/avalanche_types.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_types.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,126 @@
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++#ifndef _avalanche_types_h_
++#define _avalanche_types_h_
++
++/*--- #include <asm/avalanche/generic/hal_modules/haltypes.h> ---*/
++#ifndef TRUE
++#define TRUE 1
++#endif
++#ifndef FALSE
++#define FALSE 0
++#endif
++#ifndef NULL
++#define NULL (void *)0
++#endif
++
++/*------------------------------------------------------------------------------------------*\
++ * Typen für Texas GPL Module
++\*------------------------------------------------------------------------------------------*/
++#ifndef __UINT8_T__
++typedef unsigned char UINT8;
++#define __UINT8_T__
++#endif
++
++#ifndef __UCHAR_T__
++typedef unsigned char UCHAR;
++#define __UCHAR_T__
++#endif
++
++#ifndef __INT8_T__
++typedef signed char INT8;
++#define __INT8_T__
++#endif
++
++#ifndef __UINT16_T__
++typedef unsigned short UINT16;
++#define __UINT16_T__
++#endif
++
++#ifndef __USHORT_T__
++typedef unsigned short USHORT;
++#define __USHORT_T__
++#endif
++
++#ifndef __INT16_T__
++typedef signed short INT16;
++#define __INT16_T__
++#endif
++
++#ifndef __UINT32_T__
++typedef unsigned int UINT32;
++#define __UINT32_T__
++#endif
++
++#ifndef __UINT_T__
++typedef unsigned int UINT;
++#define __UINT_T__
++#endif
++
++#ifndef __INT32_T__
++typedef signed int INT32;
++#define __INT32_T__
++#endif
++
++#ifndef __ULONG_T__
++typedef unsigned long ULONG;
++#define __ULONG_T__
++#endif
++
++#ifndef __BOOL_T__
++typedef int BOOL;
++#define __BOOL_T__
++#endif
++
++#ifndef __STATUS_T__
++typedef int STATUS;
++#define __STATUS_T__
++#endif
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++typedef void (*p_vlynq_intr_cntrl_isr_t)(void *,void *,void *);
++typedef INT32 (*p_vlynq_interrupt_vector_set_t)(void *, UINT32, UINT32, INT32, INT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_vector_cntl_t)(void *, UINT32, INT32, UINT32);
++typedef UINT32 (*p_vlynq_interrupt_get_count_t)(void *, UINT32);
++typedef INT32 (*p_vlynq_install_isr_t)(void *, UINT32, p_vlynq_intr_cntrl_isr_t, void *, void *, void *);
++typedef INT32 (*p_vlynq_uninstall_isr_t)(void *, UINT32, void *, void *, void *);
++typedef void (*p_vlynq_root_isr_t)(void *);
++typedef void (*p_vlynq_delay_t)(UINT32);
++typedef INT32 (*p_vlynq_interrupt_vector_map_t)(void *, INT32, UINT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_set_polarity_t)(void *, INT32, UINT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_get_polarity_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_set_type_t)(void *, INT32, UINT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_get_type_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_enable_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_disable_t)(void *, INT32, UINT32);
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++extern p_vlynq_interrupt_vector_set_t p_vlynq_interrupt_vector_set;
++extern p_vlynq_interrupt_vector_cntl_t p_vlynq_interrupt_vector_cntl;
++extern p_vlynq_interrupt_get_count_t p_vlynq_interrupt_get_count;
++extern p_vlynq_install_isr_t p_vlynq_install_isr;
++extern p_vlynq_uninstall_isr_t p_vlynq_uninstall_isr;
++extern p_vlynq_root_isr_t p_vlynq_root_isr;
++extern p_vlynq_delay_t p_vlynq_delay;
++extern p_vlynq_interrupt_vector_map_t p_vlynq_interrupt_vector_map;
++extern p_vlynq_interrupt_set_polarity_t p_vlynq_interrupt_set_polarity;
++extern p_vlynq_interrupt_get_polarity_t p_vlynq_interrupt_get_polarity;
++extern p_vlynq_interrupt_set_type_t p_vlynq_interrupt_set_type;
++extern p_vlynq_interrupt_get_type_t p_vlynq_interrupt_get_type;
++extern p_vlynq_interrupt_enable_t p_vlynq_interrupt_enable;
++extern p_vlynq_interrupt_disable_t p_vlynq_interrupt_disable;
++extern void *p_vlynqDevice0;
++extern void *p_vlynqDevice1;
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++enum _avalanche_need_ {
++ avalanche_need_vlynq,
++ avalanche_need_auto_mdix
++};
++
++int avalanche_need(enum _avalanche_need_);
++
++#endif /*--- #ifndef _avalanche_types_h_ ---*/
+diff -urN linux.old/include/asm-mips/ar7/if_port.h linux.dev/include/asm-mips/ar7/if_port.h
+--- linux.old/include/asm-mips/ar7/if_port.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/if_port.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,26 @@
++/*******************************************************************************
++ * FILE PURPOSE: Interface port id Header file
++ *******************************************************************************
++ * FILE NAME: if_port.h
++ *
++ * DESCRIPTION: Header file carrying information about port ids of interfaces
++ *
++ *
++ * (C) Copyright 2003, Texas Instruments, Inc
++ ******************************************************************************/
++#ifndef _IF_PORT_H_
++#define _IF_PORT_H_
++
++#define AVALANCHE_CPMAC_LOW_PORT_ID 0
++#define AVALANCHE_CPMAC_HIGH_PORT_ID 1
++#define AVALANCHE_USB_PORT_ID 2
++#define AVALANCHE_WLAN_PORT_ID 3
++
++
++#define AVALANCHE_MARVELL_BASE_PORT_ID 4
++
++/* The marvell ports occupy port ids from 4 to 8 */
++/* so the next port id number should start at 9 */
++
++
++#endif /* _IF_PORT_H_ */
+diff -urN linux.old/include/asm-mips/ar7/sangam.h linux.dev/include/asm-mips/ar7/sangam.h
+--- linux.old/include/asm-mips/ar7/sangam.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/sangam.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,180 @@
++#ifndef _SANGAM_H_
++#define _SANGAM_H_
++
++#include <linux/config.h>
++#include <asm/addrspace.h>
++
++/*----------------------------------------------------
++ * Sangam's Module Base Addresses
++ *--------------------------------------------------*/
++#define AVALANCHE_ADSL_SUB_SYS_MEM_BASE (KSEG1ADDR(0x01000000)) /* AVALANCHE ADSL Mem Base */
++#define AVALANCHE_BROADBAND_INTERFACE__BASE (KSEG1ADDR(0x02000000)) /* AVALANCHE BBIF */
++#define AVALANCHE_ATM_SAR_BASE (KSEG1ADDR(0x03000000)) /* AVALANCHE ATM SAR */
++#define AVALANCHE_USB_SLAVE_BASE (KSEG1ADDR(0x03400000)) /* AVALANCHE USB SLAVE */
++#define AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x04000000)) /* AVALANCHE VLYNQ 0 Mem map */
++#define AVALANCHE_LOW_CPMAC_BASE (KSEG1ADDR(0x08610000)) /* AVALANCHE CPMAC 0 */
++#define AVALANCHE_EMIF_CONTROL_BASE (KSEG1ADDR(0x08610800)) /* AVALANCHE EMIF */
++#define AVALANCHE_GPIO_BASE (KSEG1ADDR(0x08610900)) /* AVALANCHE GPIO */
++#define AVALANCHE_CLOCK_CONTROL_BASE (KSEG1ADDR(0x08610A00)) /* AVALANCHE Clock Control */
++#define AVALANCHE_WATCHDOG_TIMER_BASE (KSEG1ADDR(0x08610B00)) /* AVALANCHE Watch Dog Timer */
++#define AVALANCHE_TIMER0_BASE (KSEG1ADDR(0x08610C00)) /* AVALANCHE Timer 1 */
++#define AVALANCHE_TIMER1_BASE (KSEG1ADDR(0x08610D00)) /* AVALANCHE Timer 2 */
++#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
++#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 0 */
++#define AVALANCHE_I2C_BASE (KSEG1ADDR(0x08611000)) /* AVALANCHE I2C */
++#define AVALANCHE_USB_SLAVE_CONTROL_BASE (KSEG1ADDR(0x08611200)) /* AVALANCHE USB DMA */
++#define AVALANCHE_MCDMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* AVALANCHE MC DMA 0 (channels 0-3) */
++#define AVALANCHE_RESET_CONTROL_BASE (KSEG1ADDR(0x08611600)) /* AVALANCHE Reset Control */
++#define AVALANCHE_BIST_CONTROL_BASE (KSEG1ADDR(0x08611700)) /* AVALANCHE BIST Control */
++#define AVALANCHE_LOW_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611800)) /* AVALANCHE VLYNQ0 Control */
++#define AVALANCHE_DEVICE_CONFIG_LATCH_BASE (KSEG1ADDR(0x08611A00)) /* AVALANCHE Device Config Latch */
++#define AVALANCHE_HIGH_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611C00)) /* AVALANCHE VLYNQ1 Control */
++#define AVALANCHE_MDIO_BASE (KSEG1ADDR(0x08611E00)) /* AVALANCHE MDIO */
++#define AVALANCHE_FSER_BASE (KSEG1ADDR(0x08612000)) /* AVALANCHE FSER base */
++#define AVALANCHE_INTC_BASE (KSEG1ADDR(0x08612400)) /* AVALANCHE INTC */
++#define AVALANCHE_HIGH_CPMAC_BASE (KSEG1ADDR(0x08612800)) /* AVALANCHE CPMAC 1 */
++#define AVALANCHE_HIGH_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x0C000000)) /* AVALANCHE VLYNQ 1 Mem map */
++
++#define AVALANCHE_SDRAM_BASE 0x14000000UL
++
++
++/*----------------------------------------------------
++ * Sangam Interrupt Map (Primary Interrupts)
++ *--------------------------------------------------*/
++
++#define AVALANCHE_UNIFIED_SECONDARY_INT 0
++#define AVALANCHE_EXT_INT_0 1
++#define AVALANCHE_EXT_INT_1 2
++/* Line# 3 to 4 are reserved */
++#define AVALANCHE_TIMER_0_INT 5
++#define AVALANCHE_TIMER_1_INT 6
++#define AVALANCHE_UART0_INT 7
++#define AVALANCHE_UART1_INT 8
++#define AVALANCHE_DMA_INT0 9
++#define AVALANCHE_DMA_INT1 10
++/* Line# 11 to 14 are reserved */
++#define AVALANCHE_ATM_SAR_INT 15
++/* Line# 16 to 18 are reserved */
++#define AVALANCHE_LOW_CPMAC_INT 19
++/* Line# 20 is reserved */
++#define AVALANCHE_LOW_VLYNQ_INT 21
++#define AVALANCHE_CODEC_WAKEUP_INT 22
++/* Line# 23 is reserved */
++#define AVALANCHE_USB_SLAVE_INT 24
++#define AVALANCHE_HIGH_VLYNQ_INT 25
++/* Line# 26 to 27 are reserved */
++#define AVALANCHE_UNIFIED_PHY_INT 28
++#define AVALANCHE_I2C_INT 29
++#define AVALANCHE_DMA_INT2 30
++#define AVALANCHE_DMA_INT3 31
++/* Line# 32 is reserved */
++#define AVALANCHE_HIGH_CPMAC_INT 33
++/* Line# 34 to 36 is reserved */
++#define AVALANCHE_VDMA_VT_RX_INT 37
++#define AVALANCHE_VDMA_VT_TX_INT 38
++#define AVALANCHE_ADSL_SUB_SYSTEM_INT 39
++
++
++#define AVALANCHE_EMIF_INT 47
++
++
++
++/*-----------------------------------------------------------
++ * Sangam's Reset Bits
++ *---------------------------------------------------------*/
++
++#define AVALANCHE_UART0_RESET_BIT 0
++#define AVALANCHE_UART1_RESET_BIT 1
++#define AVALANCHE_I2C_RESET_BIT 2
++#define AVALANCHE_TIMER0_RESET_BIT 3
++#define AVALANCHE_TIMER1_RESET_BIT 4
++/* Reset bit 5 is reserved. */
++#define AVALANCHE_GPIO_RESET_BIT 6
++#define AVALANCHE_ADSL_SUB_SYS_RESET_BIT 7
++#define AVALANCHE_USB_SLAVE_RESET_BIT 8
++#define AVALANCHE_ATM_SAR_RESET_BIT 9
++/* Reset bit 10 is reserved. */
++#define AVALANCHE_VDMA_VT_RESET_BIT 11
++#define AVALANCHE_FSER_RESET_BIT 12
++/* Reset bit 13 to 15 are reserved */
++#define AVALANCHE_HIGH_VLYNQ_RESET_BIT 16
++#define AVALANCHE_LOW_CPMAC_RESET_BIT 17
++#define AVALANCHE_MCDMA_RESET_BIT 18
++#define AVALANCHE_BIST_RESET_BIT 19
++#define AVALANCHE_LOW_VLYNQ_RESET_BIT 20
++#define AVALANCHE_HIGH_CPMAC_RESET_BIT 21
++#define AVALANCHE_MDIO_RESET_BIT 22
++#define AVALANCHE_ADSL_SUB_SYS_DSP_RESET_BIT 23
++/* Reset bit 24 to 25 are reserved */
++#define AVALANCHE_LOW_EPHY_RESET_BIT 26
++/* Reset bit 27 to 31 are reserved */
++
++
++#define AVALANCHE_POWER_MODULE_USBSP 0
++#define AVALANCHE_POWER_MODULE_WDTP 1
++#define AVALANCHE_POWER_MODULE_UT0P 2
++#define AVALANCHE_POWER_MODULE_UT1P 3
++#define AVALANCHE_POWER_MODULE_IICP 4
++#define AVALANCHE_POWER_MODULE_VDMAP 5
++#define AVALANCHE_POWER_MODULE_GPIOP 6
++#define AVALANCHE_POWER_MODULE_VLYNQ1P 7
++#define AVALANCHE_POWER_MODULE_SARP 8
++#define AVALANCHE_POWER_MODULE_ADSLP 9
++#define AVALANCHE_POWER_MODULE_EMIFP 10
++#define AVALANCHE_POWER_MODULE_ADSPP 12
++#define AVALANCHE_POWER_MODULE_RAMP 13
++#define AVALANCHE_POWER_MODULE_ROMP 14
++#define AVALANCHE_POWER_MODULE_DMAP 15
++#define AVALANCHE_POWER_MODULE_BISTP 16
++#define AVALANCHE_POWER_MODULE_TIMER0P 18
++#define AVALANCHE_POWER_MODULE_TIMER1P 19
++#define AVALANCHE_POWER_MODULE_EMAC0P 20
++#define AVALANCHE_POWER_MODULE_EMAC1P 22
++#define AVALANCHE_POWER_MODULE_EPHYP 24
++#define AVALANCHE_POWER_MODULE_VLYNQ0P 27
++
++
++
++
++
++/*
++ * Sangam board vectors
++ */
++
++#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE))
++
++/*-----------------------------------------------------------------------------
++ * Sangam's system register.
++ *
++ *---------------------------------------------------------------------------*/
++#define AVALANCHE_DCL_BOOTCR (KSEG1ADDR(0x08611A00))
++#define AVALANCHE_EMIF_SDRAM_CFG (AVALANCHE_EMIF_CONTROL_BASE + 0x8)
++#define AVALANCHE_RST_CTRL_PRCR (KSEG1ADDR(0x08611600))
++#define AVALANCHE_RST_CTRL_SWRCR (KSEG1ADDR(0x08611604))
++#define AVALANCHE_RST_CTRL_RSR (KSEG1ADDR(0x08611600))
++
++#define AVALANCHE_POWER_CTRL_PDCR (KSEG1ADDR(0x08610A00))
++#define AVALANCHE_WAKEUP_CTRL_WKCR (KSEG1ADDR(0x08610A0C))
++
++#define AVALANCHE_GPIO_DATA_IN (AVALANCHE_GPIO_BASE + 0x0)
++#define AVALANCHE_GPIO_DATA_OUT (AVALANCHE_GPIO_BASE + 0x4)
++#define AVALANCHE_GPIO_DIR (AVALANCHE_GPIO_BASE + 0x8)
++#define AVALANCHE_GPIO_ENBL (AVALANCHE_GPIO_BASE + 0xC)
++#define AVALANCHE_CVR (AVALANCHE_GPIO_BASE + 0x14)
++
++/*
++ * Yamon Prom print address.
++ */
++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */
++#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
++
++#define AVALANCHE_BASE_BAUD ( 3686400 / 16 )
++
++#define AVALANCHE_GPIO_PIN_COUNT 32
++#define AVALANCHE_GPIO_OFF_MAP {0xF34FFFC0}
++
++#include "sangam_boards.h"
++
++#endif /*_SANGAM_H_ */
+diff -urN linux.old/include/asm-mips/ar7/sangam_boards.h linux.dev/include/asm-mips/ar7/sangam_boards.h
+--- linux.old/include/asm-mips/ar7/sangam_boards.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/sangam_boards.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,77 @@
++#ifndef _SANGAM_BOARDS_H
++#define _SANGAM_BOARDS_H
++
++// Let us define board specific information here.
++
++
++#if defined(CONFIG_AR7DB)
++
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++
++#endif
++
++
++#if defined(CONFIG_AR7RD)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7WI)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7V)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7WRD)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7VWI)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined CONFIG_SEAD2
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0xAAAAAAAA
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0
++#include <asm/mips-boards/sead.h>
++#endif
++
++
++#endif
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ar7/tnetd73xx.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx.h 2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,338 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Common Header File
++ ******************************************************************************
++ * FILE NAME: tnetd73xx.h
++ *
++ * DESCRIPTION: shared typedef's, constants and API for TNETD73xx
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++/*
++ *
++ *
++ * These are const, typedef, and api definitions for tnetd73xx.
++ *
++ * NOTES:
++ * 1. This file may be included into both C and Assembly files.
++ * - for .s files, please do #define _ASMLANGUAGE in your ASM file to
++ * avoid C data types (typedefs) below;
++ * - for .c files, you don't have to do anything special.
++ *
++ * 2. This file has a number of sections for each SOC subsystem. When adding
++ * a new constant, find the subsystem you are working on and follow the
++ * name pattern. If you are adding another typedef for your interface, please,
++ * place it with other typedefs and function prototypes.
++ *
++ * 3. Please, DO NOT add any macros or types that are local to a subsystem to avoid
++ * cluttering. Include such items directly into the module's .c file or have a
++ * local .h file to pass data between smaller modules. This file defines only
++ * shared items.
++ */
++
++#ifndef __TNETD73XX_H__
++#define __TNETD73XX_H__
++
++#ifndef _ASMLANGUAGE /* This part not for assembly language */
++
++extern unsigned int tnetd73xx_mips_freq;
++extern unsigned int tnetd73xx_vbus_freq;
++
++#include "tnetd73xx_err.h"
++
++#endif /* _ASMLANGUAGE */
++
++
++/*******************************************************************************************
++* Emerald core specific
++******************************************************************************************** */
++
++#ifdef BIG_ENDIAN
++#elif defined(LITTLE_ENDIAN)
++#else
++#error Need to define endianism
++#endif
++
++#ifndef KSEG_MSK
++#define KSEG_MSK 0xE0000000 /* Most significant 3 bits denote kseg choice */
++#endif
++
++#ifndef KSEG_INV_MASK
++#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */
++#endif
++
++#ifndef KSEG0_BASE
++#define KSEG0_BASE 0x80000000
++#endif
++
++#ifndef KSEG1_BASE
++#define KSEG1_BASE 0xA0000000
++#endif
++
++#ifndef KSEG0
++#define KSEG0(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG0_BASE)
++#endif
++
++#ifndef KSEG1
++#define KSEG1(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG1_BASE)
++#endif
++
++#ifndef KUSEG
++#define KUSEG(addr) ((__u32)(addr) & ~KSEG_MSK)
++#endif
++
++#ifndef PHYS_ADDR
++#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK)
++#endif
++
++#ifndef PHYS_TO_K0
++#define PHYS_TO_K0(addr) (PHYS_ADDR(addr)|KSEG0_BASE)
++#endif
++
++#ifndef PHYS_TO_K1
++#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE)
++#endif
++
++#ifndef REG8_ADDR
++#define REG8_ADDR(addr) (volatile __u8 *)(PHYS_TO_K1(addr))
++#define REG8_DATA(addr) (*(volatile __u8 *)(PHYS_TO_K1(addr)))
++#define REG8_WRITE(addr, data) REG8_DATA(addr) = data;
++#define REG8_READ(addr, data) data = (__u8) REG8_DATA(addr);
++#endif
++
++#ifndef REG16_ADDR
++#define REG16_ADDR(addr) (volatile __u16 *)(PHYS_TO_K1(addr))
++#define REG16_DATA(addr) (*(volatile __u16 *)(PHYS_TO_K1(addr)))
++#define REG16_WRITE(addr, data) REG16_DATA(addr) = data;
++#define REG16_READ(addr, data) data = (__u16) REG16_DATA(addr);
++#endif
++
++#ifndef REG32_ADDR
++#define REG32_ADDR(addr) (volatile __u32 *)(PHYS_TO_K1(addr))
++#define REG32_DATA(addr) (*(volatile __u32 *)(PHYS_TO_K1(addr)))
++#define REG32_WRITE(addr, data) REG32_DATA(addr) = data;
++#define REG32_READ(addr, data) data = (__u32) REG32_DATA(addr);
++#endif
++
++#ifdef _LINK_KSEG0_ /* Application is linked into KSEG0 space */
++#define VIRT_ADDR(addr) PHYS_TO_K0(PHYS_ADDR(addr))
++#endif
++
++#ifdef _LINK_KSEG1_ /* Application is linked into KSEG1 space */
++#define VIRT_ADDR(addr) PHYS_TO_K1(PHYS_ADDR(addr))
++#endif
++
++#if !defined(_LINK_KSEG0_) && !defined(_LINK_KSEG1_)
++#error You must define _LINK_KSEG0_ or _LINK_KSEG1_ to compile the code.
++#endif
++
++/* TNETD73XX chip definations */
++
++#define FREQ_1MHZ 1000000
++#define TNETD73XX_MIPS_FREQ tnetd73xx_mips_freq /* CPU clock frequency */
++#define TNETD73XX_VBUS_FREQ tnetd73xx_vbus_freq /* originally (TNETD73XX_MIPS_FREQ/2) */
++
++#ifdef AR7SEAD2
++#define TNETD73XX_MIPS_FREQ_DEFAULT 25000000 /* 25 Mhz for sead2 board crystal */
++#else
++#define TNETD73XX_MIPS_FREQ_DEFAULT 125000000 /* 125 Mhz */
++#endif
++#define TNETD73XX_VBUS_FREQ_DEFAULT (TNETD73XX_MIPS_FREQ_DEFAULT / 2) /* Sync mode */
++
++
++
++/* Module base addresses */
++#define TNETD73XX_ADSLSS_BASE PHYS_TO_K1(0x01000000) /* ADSLSS Module */
++#define TNETD73XX_BBIF_CTRL_BASE PHYS_TO_K1(0x02000000) /* BBIF Control */
++#define TNETD73XX_ATMSAR_BASE PHYS_TO_K1(0x03000000) /* ATM SAR */
++#define TNETD73XX_USB_BASE PHYS_TO_K1(0x03400000) /* USB Module */
++#define TNETD73XX_VLYNQ0_BASE PHYS_TO_K1(0x04000000) /* VLYNQ0 Module */
++#define TNETD73xx_EMAC0_BASE PHYS_TO_K1(0x08610000) /* EMAC0 Module*/
++#define TNETD73XX_EMIF_BASE PHYS_TO_K1(0x08610800) /* EMIF Module */
++#define TNETD73XX_GPIO_BASE PHYS_TO_K1(0x08610900) /* GPIO control */
++#define TNETD73XX_CLOCK_CTRL_BASE PHYS_TO_K1(0x08610A00) /* Clock Control */
++#define TNETD73XX_WDTIMER_BASE PHYS_TO_K1(0x08610B00) /* WDTIMER Module */
++#define TNETD73XX_TIMER0_BASE PHYS_TO_K1(0x08610C00) /* TIMER0 Module */
++#define TNETD73XX_TIMER1_BASE PHYS_TO_K1(0x08610D00) /* TIMER1 Module */
++#define TNETD73XX_UARTA_BASE PHYS_TO_K1(0x08610E00) /* UART A */
++#define TNETD73XX_UARTB_BASE PHYS_TO_K1(0x08610F00) /* UART B */
++#define TNETD73XX_I2C_BASE PHYS_TO_K1(0x08611000) /* I2C Module */
++#define TNETD73XX_USB_DMA_BASE PHYS_TO_K1(0x08611200) /* USB Module */
++#define TNETD73XX_MCDMA_BASE PHYS_TO_K1(0x08611400) /* MC-DMA */
++#define TNETD73xx_VDMAVT_BASE PHYS_TO_K1(0x08611500) /* VDMAVT Control */
++#define TNETD73XX_RST_CTRL_BASE PHYS_TO_K1(0x08611600) /* Reset Control */
++#define TNETD73xx_BIST_CTRL_BASE PHYS_TO_K1(0x08611700) /* BIST Control */
++#define TNETD73xx_VLYNQ0_CTRL_BASE PHYS_TO_K1(0x08611800) /* VLYNQ0 Control */
++#define TNETD73XX_DCL_BASE PHYS_TO_K1(0x08611A00) /* Device Configuration Latch */
++#define TNETD73xx_VLYNQ1_CTRL_BASE PHYS_TO_K1(0x08611C00) /* VLYNQ1 Control */
++#define TNETD73xx_MDIO_BASE PHYS_TO_K1(0x08611E00) /* MDIO Control */
++#define TNETD73XX_FSER_BASE PHYS_TO_K1(0x08612000) /* FSER Control */
++#define TNETD73XX_INTC_BASE PHYS_TO_K1(0x08612400) /* Interrupt Controller */
++#define TNETD73xx_EMAC1_BASE PHYS_TO_K1(0x08612800) /* EMAC1 Module*/
++#define TNETD73XX_VLYNQ1_BASE PHYS_TO_K1(0x0C000000) /* VLYNQ1 Module */
++
++/* BBIF Registers */
++#define TNETD73XX_BBIF_ADSLADR (TNETD73XX_BBIF_CTRL_BASE + 0x0)
++
++/* Device Configuration Latch Registers */
++#define TNETD73XX_DCL_BOOTCR (TNETD73XX_DCL_BASE + 0x0)
++#define TNETD73XX_DCL_DPLLSELR (TNETD73XX_DCL_BASE + 0x10)
++#define TNETD73XX_DCL_SPEEDCTLR (TNETD73XX_DCL_BASE + 0x14)
++#define TNETD73XX_DCL_SPEEDPWDR (TNETD73XX_DCL_BASE + 0x18)
++#define TNETD73XX_DCL_SPEEDCAPR (TNETD73XX_DCL_BASE + 0x1C)
++
++/* GPIO Control */
++#define TNETD73XX_GPIODINR (TNETD73XX_GPIO_BASE + 0x0)
++#define TNETD73XX_GPIODOUTR (TNETD73XX_GPIO_BASE + 0x4)
++#define TNETD73XX_GPIOPDIRR (TNETD73XX_GPIO_BASE + 0x8)
++#define TNETD73XX_GPIOENR (TNETD73XX_GPIO_BASE + 0xC)
++#define TNETD73XX_CVR (TNETD73XX_GPIO_BASE + 0x14)
++#define TNETD73XX_DIDR1 (TNETD73XX_GPIO_BASE + 0x18)
++#define TNETD73XX_DIDR2 (TNETD73XX_GPIO_BASE + 0x1C)
++
++/* Reset Control */
++#define TNETD73XX_RST_CTRL_PRCR (TNETD73XX_RST_CTRL_BASE + 0x0)
++#define TNETD73XX_RST_CTRL_SWRCR (TNETD73XX_RST_CTRL_BASE + 0x4)
++#define TNETD73XX_RST_CTRL_RSR (TNETD73XX_RST_CTRL_BASE + 0x8)
++
++/* Power Control */
++#define TNETD73XX_POWER_CTRL_PDCR (TNETD73XX_CLOCK_CTRL_BASE + 0x0)
++#define TNETD73XX_POWER_CTRL_PCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x4)
++#define TNETD73XX_POWER_CTRL_PDUCR (TNETD73XX_CLOCK_CTRL_BASE + 0x8)
++#define TNETD73XX_POWER_CTRL_WKCR (TNETD73XX_CLOCK_CTRL_BASE + 0xC)
++
++/* Clock Control */
++#define TNETD73XX_CLK_CTRL_SCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x20)
++#define TNETD73XX_CLK_CTRL_SCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x30)
++#define TNETD73XX_CLK_CTRL_MCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x40)
++#define TNETD73XX_CLK_CTRL_MCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x50)
++#define TNETD73XX_CLK_CTRL_UCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x60)
++#define TNETD73XX_CLK_CTRL_UCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x70)
++#define TNETD73XX_CLK_CTRL_ACLKCR0 (TNETD73XX_CLOCK_CTRL_BASE + 0x80)
++#define TNETD73XX_CLK_CTRL_ACLKPLLCR0 (TNETD73XX_CLOCK_CTRL_BASE + 0x90)
++#define TNETD73XX_CLK_CTRL_ACLKCR1 (TNETD73XX_CLOCK_CTRL_BASE + 0xA0)
++#define TNETD73XX_CLK_CTRL_ACLKPLLCR1 (TNETD73XX_CLOCK_CTRL_BASE + 0xB0)
++
++/* EMIF control */
++#define TNETD73XX_EMIF_SDRAM_CFG ( TNETD73XX_EMIF_BASE + 0x08 )
++
++/* UART */
++#ifdef AR7SEAD2
++#define TNETD73XX_UART_FREQ 3686400
++#else
++#define TNETD73XX_UART_FREQ TNETD73XX_VBUS_FREQ
++#endif
++
++/* Interrupt Controller */
++
++/* Primary interrupts */
++#define TNETD73XX_INTC_UNIFIED_SECONDARY 0 /* Unified secondary interrupt */
++#define TNETD73XX_INTC_EXTERNAL0 1 /* External Interrupt Line 0 */
++#define TNETD73XX_INTC_EXTERNAL1 2 /* External Interrupt Line 1 */
++#define TNETD73XX_INTC_RESERVED3 3 /* Reserved */
++#define TNETD73XX_INTC_RESERVED4 4 /* Reserved */
++#define TNETD73XX_INTC_TIMER0 5 /* TIMER 0 int */
++#define TNETD73XX_INTC_TIMER1 6 /* TIMER 1 int */
++#define TNETD73XX_INTC_UART0 7 /* UART 0 int */
++#define TNETD73XX_INTC_UART1 8 /* UART 1 int */
++#define TNETD73XX_INTC_MCDMA0 9 /* MCDMA 0 int */
++#define TNETD73XX_INTC_MCDMA1 10 /* MCDMA 1 int */
++#define TNETD73XX_INTC_RESERVED11 11 /* Reserved */
++#define TNETD73XX_INTC_RESERVED12 12 /* Reserved */
++#define TNETD73XX_INTC_RESERVED13 13 /* Reserved */
++#define TNETD73XX_INTC_RESERVED14 14 /* Reserved */
++#define TNETD73XX_INTC_ATMSAR 15 /* ATM SAR int */
++#define TNETD73XX_INTC_RESERVED16 16 /* Reserved */
++#define TNETD73XX_INTC_RESERVED17 17 /* Reserved */
++#define TNETD73XX_INTC_RESERVED18 18 /* Reserved */
++#define TNETD73XX_INTC_EMAC0 19 /* EMAC 0 int */
++#define TNETD73XX_INTC_RESERVED20 20 /* Reserved */
++#define TNETD73XX_INTC_VLYNQ0 21 /* VLYNQ 0 int */
++#define TNETD73XX_INTC_CODEC 22 /* CODEC int */
++#define TNETD73XX_INTC_RESERVED23 23 /* Reserved */
++#define TNETD73XX_INTC_USBSLAVE 24 /* USB Slave int */
++#define TNETD73XX_INTC_VLYNQ1 25 /* VLYNQ 1 int */
++#define TNETD73XX_INTC_RESERVED26 26 /* Reserved */
++#define TNETD73XX_INTC_RESERVED27 27 /* Reserved */
++#define TNETD73XX_INTC_ETH_PHY 28 /* Ethernet PHY */
++#define TNETD73XX_INTC_I2C 29 /* I2C int */
++#define TNETD73XX_INTC_MCDMA2 30 /* MCDMA 2 int */
++#define TNETD73XX_INTC_MCDMA3 31 /* MCDMA 3 int */
++#define TNETD73XX_INTC_RESERVED32 32 /* Reserved */
++#define TNETD73XX_INTC_EMAC1 33 /* EMAC 1 int */
++#define TNETD73XX_INTC_RESERVED34 34 /* Reserved */
++#define TNETD73XX_INTC_RESERVED35 35 /* Reserved */
++#define TNETD73XX_INTC_RESERVED36 36 /* Reserved */
++#define TNETD73XX_INTC_VDMAVTRX 37 /* VDMAVTRX */
++#define TNETD73XX_INTC_VDMAVTTX 38 /* VDMAVTTX */
++#define TNETD73XX_INTC_ADSLSS 39 /* ADSLSS */
++
++/* Secondary interrupts */
++#define TNETD73XX_INTC_SEC0 40 /* Secondary */
++#define TNETD73XX_INTC_SEC1 41 /* Secondary */
++#define TNETD73XX_INTC_SEC2 42 /* Secondary */
++#define TNETD73XX_INTC_SEC3 43 /* Secondary */
++#define TNETD73XX_INTC_SEC4 44 /* Secondary */
++#define TNETD73XX_INTC_SEC5 45 /* Secondary */
++#define TNETD73XX_INTC_SEC6 46 /* Secondary */
++#define TNETD73XX_INTC_EMIF 47 /* EMIF */
++#define TNETD73XX_INTC_SEC8 48 /* Secondary */
++#define TNETD73XX_INTC_SEC9 49 /* Secondary */
++#define TNETD73XX_INTC_SEC10 50 /* Secondary */
++#define TNETD73XX_INTC_SEC11 51 /* Secondary */
++#define TNETD73XX_INTC_SEC12 52 /* Secondary */
++#define TNETD73XX_INTC_SEC13 53 /* Secondary */
++#define TNETD73XX_INTC_SEC14 54 /* Secondary */
++#define TNETD73XX_INTC_SEC15 55 /* Secondary */
++#define TNETD73XX_INTC_SEC16 56 /* Secondary */
++#define TNETD73XX_INTC_SEC17 57 /* Secondary */
++#define TNETD73XX_INTC_SEC18 58 /* Secondary */
++#define TNETD73XX_INTC_SEC19 59 /* Secondary */
++#define TNETD73XX_INTC_SEC20 60 /* Secondary */
++#define TNETD73XX_INTC_SEC21 61 /* Secondary */
++#define TNETD73XX_INTC_SEC22 62 /* Secondary */
++#define TNETD73XX_INTC_SEC23 63 /* Secondary */
++#define TNETD73XX_INTC_SEC24 64 /* Secondary */
++#define TNETD73XX_INTC_SEC25 65 /* Secondary */
++#define TNETD73XX_INTC_SEC26 66 /* Secondary */
++#define TNETD73XX_INTC_SEC27 67 /* Secondary */
++#define TNETD73XX_INTC_SEC28 68 /* Secondary */
++#define TNETD73XX_INTC_SEC29 69 /* Secondary */
++#define TNETD73XX_INTC_SEC30 70 /* Secondary */
++#define TNETD73XX_INTC_SEC31 71 /* Secondary */
++
++/* These ugly macros are to access the -1 registers, like config1 */
++#define MFC0_SEL1_OPCODE(dst, src)\
++ .word (0x40000000 | ((dst)<<16) | ((src)<<11) | 1);\
++ nop; \
++ nop; \
++ nop
++
++#define MTC0_SEL1_OPCODE(dst, src)\
++ .word (0x40800000 | ((dst)<<16) | ((src)<<11) | 1);\
++ nop; \
++ nop; \
++ nop
++
++
++/* Below are Jade core specific */
++#define CFG0_4K_IL_MASK 0x00380000
++#define CFG0_4K_IL_SHIFT 19
++#define CFG0_4K_IA_MASK 0x00070000
++#define CFG0_4K_IA_SHIFT 16
++#define CFG0_4K_IS_MASK 0x01c00000
++#define CFG0_4K_IS_SHIFT 22
++
++#define CFG0_4K_DL_MASK 0x00001c00
++#define CFG0_4K_DL_SHIFT 10
++#define CFG0_4K_DA_MASK 0x00000380
++#define CFG0_4K_DA_SHIFT 7
++#define CFG0_4K_DS_MASK 0x0000E000
++#define CFG0_4K_DS_SHIFT 13
++
++
++
++#endif /* __TNETD73XX_H_ */
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-mips/ar7/tnetd73xx_err.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx_err.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h 2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,42 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Error Definations Header File
++ ******************************************************************************
++ * FILE NAME: tnetd73xx_err.h
++ *
++ * DESCRIPTION: Error definations for TNETD73XX
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++
++#ifndef __TNETD73XX_ERR_H__
++#define __TNETD73XX_ERR_H__
++
++typedef enum TNETD73XX_ERR_t
++{
++ TNETD73XX_ERR_OK = 0, /* OK or SUCCESS */
++ TNETD73XX_ERR_ERROR = -1, /* Unspecified/Generic ERROR */
++
++ /* Pointers and args */
++ TNETD73XX_ERR_INVARG = -2, /* Invaild argument to the call */
++ TNETD73XX_ERR_NULLPTR = -3, /* NULL pointer */
++ TNETD73XX_ERR_BADPTR = -4, /* Bad (out of mem) pointer */
++
++ /* Memory issues */
++ TNETD73XX_ERR_ALLOC_FAIL = -10, /* allocation failed */
++ TNETD73XX_ERR_FREE_FAIL = -11, /* free failed */
++ TNETD73XX_ERR_MEM_CORRUPT = -12, /* corrupted memory */
++ TNETD73XX_ERR_BUF_LINK = -13, /* buffer linking failed */
++
++ /* Device issues */
++ TNETD73XX_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */
++ TNETD73XX_ERR_DEVICE_MALFUNC = -21, /* device malfunction */
++
++ TNETD73XX_ERR_INVID = -30 /* Invalid ID */
++
++} TNETD73XX_ERR;
++
++#endif /* __TNETD73XX_ERR_H__ */
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx_misc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h 2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,239 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Misc modules API Header
++ ******************************************************************************
++ * FILE NAME: tnetd73xx_misc.h
++ *
++ * DESCRIPTION: Clock Control, Reset Control, Power Management, GPIO
++ * FSER Modules API
++ * As per TNETD73xx specifications
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - Sharath Kumar PSP TII
++ * 14 Feb 03 - Anant Gole PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#ifndef __TNETD73XX_MISC_H__
++#define __TNETD73XX_MISC_H__
++
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
++
++typedef enum TNETD73XX_RESET_MODULE_tag
++{
++ RESET_MODULE_UART0 = 0,
++ RESET_MODULE_UART1 = 1,
++ RESET_MODULE_I2C = 2,
++ RESET_MODULE_TIMER0 = 3,
++ RESET_MODULE_TIMER1 = 4,
++ RESET_MODULE_GPIO = 6,
++ RESET_MODULE_ADSLSS = 7,
++ RESET_MODULE_USBS = 8,
++ RESET_MODULE_SAR = 9,
++ RESET_MODULE_VDMA_VT = 11,
++ RESET_MODULE_FSER = 12,
++ RESET_MODULE_VLYNQ1 = 16,
++ RESET_MODULE_EMAC0 = 17,
++ RESET_MODULE_DMA = 18,
++ RESET_MODULE_BIST = 19,
++ RESET_MODULE_VLYNQ0 = 20,
++ RESET_MODULE_EMAC1 = 21,
++ RESET_MODULE_MDIO = 22,
++ RESET_MODULE_ADSLSS_DSP = 23,
++ RESET_MODULE_EPHY = 26
++} TNETD73XX_RESET_MODULE_T;
++
++typedef enum TNETD73XX_RESET_CTRL_tag
++{
++ IN_RESET = 0,
++ OUT_OF_RESET
++} TNETD73XX_RESET_CTRL_T;
++
++typedef enum TNETD73XX_SYS_RST_MODE_tag
++{
++ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */
++ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */
++} TNETD73XX_SYS_RST_MODE_T;
++
++typedef enum TNETD73XX_SYS_RESET_STATUS_tag
++{
++ HARDWARE_RESET = 0,
++ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */
++ WATCHDOG_RESET,
++ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */
++} TNETD73XX_SYS_RESET_STATUS_T;
++
++void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module,
++ TNETD73XX_RESET_CTRL_T reset_ctrl);
++TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status(TNETD73XX_RESET_MODULE_T reset_module);
++void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode);
++TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status(void);
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++
++typedef enum TNETD73XX_POWER_MODULE_tag
++{
++ POWER_MODULE_USBSP = 0,
++ POWER_MODULE_WDTP = 1,
++ POWER_MODULE_UT0P = 2,
++ POWER_MODULE_UT1P = 3,
++ POWER_MODULE_IICP = 4,
++ POWER_MODULE_VDMAP = 5,
++ POWER_MODULE_GPIOP = 6,
++ POWER_MODULE_VLYNQ1P = 7,
++ POWER_MODULE_SARP = 8,
++ POWER_MODULE_ADSLP = 9,
++ POWER_MODULE_EMIFP = 10,
++ POWER_MODULE_ADSPP = 12,
++ POWER_MODULE_RAMP = 13,
++ POWER_MODULE_ROMP = 14,
++ POWER_MODULE_DMAP = 15,
++ POWER_MODULE_BISTP = 16,
++ POWER_MODULE_TIMER0P = 18,
++ POWER_MODULE_TIMER1P = 19,
++ POWER_MODULE_EMAC0P = 20,
++ POWER_MODULE_EMAC1P = 22,
++ POWER_MODULE_EPHYP = 24,
++ POWER_MODULE_VLYNQ0P = 27,
++} TNETD73XX_POWER_MODULE_T;
++
++typedef enum TNETD73XX_POWER_CTRL_tag
++{
++ POWER_CTRL_POWER_UP = 0,
++ POWER_CTRL_POWER_DOWN
++} TNETD73XX_POWER_CTRL_T;
++
++typedef enum TNETD73XX_SYS_POWER_MODE_tag
++{
++ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */
++ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */
++ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */
++ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */
++} TNETD73XX_SYS_POWER_MODE_T;
++
++void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl);
++TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module);
++void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode);
++TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode(void);
++
++/*****************************************************************************
++ * Wakeup Control
++ *****************************************************************************/
++
++typedef enum TNETD73XX_WAKEUP_INTERRUPT_tag
++{
++ WAKEUP_INT0 = 1,
++ WAKEUP_INT1 = 2,
++ WAKEUP_INT2 = 4,
++ WAKEUP_INT3 = 8
++} TNETD73XX_WAKEUP_INTERRUPT_T;
++
++typedef enum TNETD73XX_WAKEUP_CTRL_tag
++{
++ WAKEUP_DISABLED = 0,
++ WAKEUP_ENABLED
++} TNETD73XX_WAKEUP_CTRL_T;
++
++typedef enum TNETD73XX_WAKEUP_POLARITY_tag
++{
++ WAKEUP_ACTIVE_HIGH = 0,
++ WAKEUP_ACTIVE_LOW
++} TNETD73XX_WAKEUP_POLARITY_T;
++
++void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int,
++ TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl,
++ TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity);
++
++/*****************************************************************************
++ * FSER Control
++ *****************************************************************************/
++
++typedef enum TNETD73XX_FSER_MODE_tag
++{
++ FSER_I2C = 0,
++ FSER_UART = 1
++} TNETD73XX_FSER_MODE_T;
++
++void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode);
++
++/*****************************************************************************
++ * Clock Control
++ *****************************************************************************/
++
++#define CLK_MHZ(x) ( (x) * 1000000 )
++
++typedef enum TNETD73XX_CLKC_ID_tag
++{
++ CLKC_SYS = 0,
++ CLKC_MIPS,
++ CLKC_USB,
++ CLKC_ADSLSS
++} TNETD73XX_CLKC_ID_T;
++
++void tnetd73xx_clkc_init(__u32 afeclk, __u32 refclk, __u32 xtal3in);
++TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, __u32 output_freq);
++__u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id);
++
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
++
++typedef enum TNETD73XX_GPIO_PIN_tag
++{
++ GPIO_UART0_RD = 0,
++ GPIO_UART0_TD = 1,
++ GPIO_UART0_RTS = 2,
++ GPIO_UART0_CTS = 3,
++ GPIO_FSER_CLK = 4,
++ GPIO_FSER_D = 5,
++ GPIO_EXT_AFE_SCLK = 6,
++ GPIO_EXT_AFE_TX_FS = 7,
++ GPIO_EXT_AFE_TXD = 8,
++ GPIO_EXT_AFE_RS_FS = 9,
++ GPIO_EXT_AFE_RXD1 = 10,
++ GPIO_EXT_AFE_RXD0 = 11,
++ GPIO_EXT_AFE_CDIN = 12,
++ GPIO_EXT_AFE_CDOUT = 13,
++ GPIO_EPHY_SPEED100 = 14,
++ GPIO_EPHY_LINKON = 15,
++ GPIO_EPHY_ACTIVITY = 16,
++ GPIO_EPHY_FDUPLEX = 17,
++ GPIO_EINT0 = 18,
++ GPIO_EINT1 = 19,
++ GPIO_MBSP0_TCLK = 20,
++ GPIO_MBSP0_RCLK = 21,
++ GPIO_MBSP0_RD = 22,
++ GPIO_MBSP0_TD = 23,
++ GPIO_MBSP0_RFS = 24,
++ GPIO_MBSP0_TFS = 25,
++ GPIO_MII_DIO = 26,
++ GPIO_MII_DCLK = 27,
++} TNETD73XX_GPIO_PIN_T;
++
++typedef enum TNETD73XX_GPIO_PIN_MODE_tag
++{
++ FUNCTIONAL_PIN = 0,
++ GPIO_PIN = 1
++} TNETD73XX_GPIO_PIN_MODE_T;
++
++typedef enum TNETD73XX_GPIO_PIN_DIRECTION_tag
++{
++ GPIO_OUTPUT_PIN = 0,
++ GPIO_INPUT_PIN = 1
++} TNETD73XX_GPIO_PIN_DIRECTION_T;
++
++void tnetd73xx_gpio_init(void);
++void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin,
++ TNETD73XX_GPIO_PIN_MODE_T pin_mode,
++ TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction);
++void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value);
++int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin);
++
++/* TNETD73XX Revision */
++__u32 tnetd73xx_get_revision(void);
++
++#endif /* __TNETD73XX_MISC_H__ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq.h linux.dev/include/asm-mips/ar7/vlynq.h
+--- linux.old/include/asm-mips/ar7/vlynq.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq.h 2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,610 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/*********************************************************************************
++ * ------------------------------------------------------------------------------
++ * Module : vlynq_hal.h
++ * Description :
++ * This header file provides the set of functions exported by the
++ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper.
++ * ------------------------------------------------------------------------------
++ *********************************************************************************/
++
++#ifndef _VLYNQ_HAL_H_
++#define _VLYNQ_HAL_H_
++
++/* Enable/Disable debug feature */
++#undef VLYNQ_DEBUG
++
++#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */
++#define debugPrint(format,args...)
++#else
++#define debugPrint(format,args...)
++#endif
++
++ /* number of VLYNQ memory regions supported */
++#define VLYNQ_MAX_MEMORY_REGIONS 0x04
++
++ /* Max.number of external interrupt inputs supported by VLYNQ module */
++#define VLYNQ_IVR_MAXIVR 0x08
++
++#define VLYNQ_CLK_DIV_MAX 0x08
++#define VLYNQ_CLK_DIV_MIN 0x01
++
++
++/*** the total number of entries allocated for ICB would be
++ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/
++#define VLYNQ_IVR_CHAIN_SLOTS 10
++
++
++/* Error defines */
++#define VLYNQ_SUCCESS 0
++
++#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */
++#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1)
++#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2)
++#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3)
++#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4)
++#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5)
++#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6)
++#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7)
++
++/* Vlynq Defines and Macros */
++
++#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */
++
++/* Base address of module */
++#define VLYNQ_BASE (pdev->module_base)
++
++#define VLYNQ_REMOTE_REGS_OFFSET 0x0080
++
++#define VLYNQ_REV_OFFSET 0x0000
++#define VLYNQ_CTRL_OFFSET 0x0004
++#define VLYNQ_STATUS_OFFSET 0x0008
++#define VLYNQ_INT_STAT_OFFSET 0x0010
++#define VLYNQ_INT_PEND_OFFSET 0x0014
++#define VLYNQ_INT_PTR_OFFSET 0x0018
++#define VLYNQ_TXMAP_OFFSET 0x001c
++
++#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020
++#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024
++
++#define VLYNQ_CHIP_VER_OFFSET 0x0040
++#define VLYNQ_IVR_REGS_OFFSET 0x0060
++
++#define VLYNQ_INT_PENDING_REG_PTR 0x14
++#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14
++
++#define VLYNQ_REV_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_REV_OFFSET))
++#define VLYNQ_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET))
++#define VLYNQ_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET))
++#define VLYNQ_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET))
++#define VLYNQ_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET))
++#define VLYNQ_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET))
++#define VLYNQ_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_SIZE_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_OFFSET_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3)))
++
++#define VLYNQ_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET))
++
++/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */
++#define VLYNQ_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) )
++
++#define VLYNQ_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(0)) )
++#define VLYNQ_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(4)) )
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++
++#define VLYNQ_IVR_INTEN(ivr) (((unsigned int)(0x80)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTTYPE(ivr) (((unsigned int)(0x40)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTPOL(ivr) (((unsigned int)(0x20)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTVEC(ivr) (((unsigned int)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTALL(ivr) (((unsigned int)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8))
++
++
++
++/*********************************
++ * Remote VLYNQ register set *
++ *********************************/
++
++#define VLYNQ_R_REV_OFFSET 0x0080
++#define VLYNQ_R_CTRL_OFFSET 0x0084
++#define VLYNQ_R_STATUS_OFFSET 0x0088
++#define VLYNQ_R_INT_STAT_OFFSET 0x0090
++#define VLYNQ_R_INT_PEND_OFFSET 0x0094
++#define VLYNQ_R_INT_PTR_OFFSET 0x0098
++#define VLYNQ_R_TXMAP_OFFSET 0x009c
++
++#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0
++#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4
++
++#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0
++#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0
++
++#define VLYNQ_R_REV_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET))
++#define VLYNQ_R_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET))
++#define VLYNQ_R_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET))
++#define VLYNQ_R_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET))
++#define VLYNQ_R_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET))
++#define VLYNQ_R_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET))
++#define VLYNQ_R_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_SIZE_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_OFFSET_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3)))
++
++#define VLYNQ_R_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET)
++
++#define VLYNQ_R_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3))
++
++
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++#define VLYNQ_R_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(0)) )
++#define VLYNQ_R_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(4)) )
++
++
++/****End of remote register set definition******/
++
++
++/*** Masks for individual register fields ***/
++
++#define VLYNQ_MODULE_ID_MASK 0xffff0000
++#define VLYNQ_MAJOR_REV_MASK 0x0000ff00
++#define VLYNQ_MINOR_REV_MASK 0x000000ff
++
++
++#define VLYNQ_CTL_ILOOP_MASK 0x00000002
++#define VLYNQ_CTL_INT2CFG_MASK 0x00000080
++#define VLYNQ_CTL_INTVEC_MASK 0x00001f00
++#define VLYNQ_CTL_INTEN_MASK 0x00002000
++#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000
++#define VLYNQ_CTL_CLKDIR_MASK 0x00008000
++#define VLYNQ_CTL_CLKDIV_MASK 0x00070000
++#define VLYNQ_CTL_MODE_MASK 0x00e00000
++
++
++#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */
++#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */
++#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */
++#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */
++#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */
++#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */
++#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */
++#define VLYNQ_STS_OFLOW_MASK 0x00000200
++#define VLYNQ_STS_IFLOW_MASK 0x00000400
++#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */
++#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */
++#define VLYNQ_STS_DEBUG_MASK 0xE0000000
++
++#define VLYNQ_CTL_INTVEC_SHIFT 0x08
++#define VLYNQ_CTL_INTEN_SHIFT 0x0D
++#define VLYNQ_CTL_INT2CFG_SHIFT 0x07
++#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E
++
++#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80
++
++#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000
++#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff
++
++#define VLYNQ_IVR_INTEN_MASK 0x80
++#define VLYNQ_IVR_INTTYPE_MASK 0x40
++#define VLYNQ_IVR_INTPOL_MASK 0x20
++
++
++/**** Helper macros ****/
++
++#define VLYNQ_RESETCB(arg) \
++ if( pdev->reset_cb != NULL) \
++ { \
++ (pdev->reset_cb)(pdev, (arg)); \
++ }
++
++#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 )
++#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 )
++
++#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo)))
++#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo)))
++
++#define VLYNQ_ALIGN4(x) (x)=(x)&(~3)
++
++
++/*************************************
++ * Enums *
++ *************************************/
++
++/* Initialization options define what operations are
++ * undertaken during vlynq module initialization */
++typedef enum
++{
++ /* Init host local memory regions.This allows
++ * local host access remote memory regions */
++ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01,
++ /* Init host remote memory regions.This allows
++ * remote device access local memory regions */
++ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02,
++ /* Init local interrupt config*/
++ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04,
++ /* Init remote interrupt config*/
++ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08,
++ /* Check link during initialization*/
++ VLYNQ_INIT_CHECK_LINK =0x10,
++ /* configure clock during init */
++ VLYNQ_INIT_CONFIG_CLOCK =0x20,
++ /* Clear errors during init */
++ VLYNQ_INIT_CLEAR_ERRORS =0x40,
++ /* All options */
++ VLYNQ_INIT_PERFORM_ALL =0x7F
++}VLYNQ_INIT_OPTIONS;
++
++
++/* VLYNQ_DEV_TYPE identifies local or remote device */
++typedef enum
++{
++ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */
++ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */
++}VLYNQ_DEV_TYPE;
++
++
++/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */
++typedef enum
++{
++ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/
++ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */
++ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */
++}VLYNQ_CLK_SOURCE;
++
++
++/* VLYNQ_DRV_STATE indicates the current driver state */
++typedef enum
++{
++ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */
++ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */
++ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */
++ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */
++ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */
++}VLYNQ_DRV_STATE;
++
++
++/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */
++typedef enum
++{
++ VLYNQ_BUS_WIDTH_3 = 3,
++ VLYNQ_BUS_WIDTH_5 = 5,
++ VLYNQ_BUS_WIDTH_7 = 7,
++ VLYNQ_BUS_WIDTH_9 = 9
++}VLYNQ_BUS_WIDTH;
++
++
++/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq
++ * interrupts are processed by the host or passed on to the
++ * remote device.
++ */
++typedef enum
++{
++ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */
++ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */
++}VLYNQ_LOCAL_INT_CONFIG;
++
++
++/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote
++ * interrupts are to be handled by the SOC system ISR
++ * or via the vlynq root ISR
++ */
++typedef enum
++{
++ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */
++ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */
++}VLYNQ_REMOTE_INT_CONFIG;
++
++
++/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */
++typedef enum
++{
++ VLYNQ_INTR_ACTIVE_HIGH = 0,
++ VLYNQ_INTR_ACTIVE_LOW = 1
++}VLYNQ_INTR_POLARITY;
++
++
++/* VLYNQ_INTR_TYPE - vlynq interrupt type */
++typedef enum
++{
++ VLYNQ_INTR_LEVEL = 0,
++ VLYNQ_INTR_PULSED = 1
++}VLYNQ_INTR_TYPE;
++
++
++/* VLYNQ_RESET_MODE - vlynq reset mode */
++typedef enum
++{
++ VLYNQ_RESET_ASSERT, /* hold device in reset state */
++ VLYNQ_RESET_DEASSERT, /* release device from reset state */
++ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */
++ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */
++ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */
++ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */
++}VLYNQ_RESET_MODE;
++
++
++
++/*************************************
++ * Typedefs *
++ *************************************/
++
++struct VLYNQ_DEV_t; /*forward declaration*/
++
++/*--------Function Pointers defintions -----------*/
++
++/* prototype for interrupt handler definition */
++typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3);
++
++typedef void
++(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode);
++
++typedef void
++(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */
++ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */
++ unsigned int dwStatRegVal); /* Value of the relevant status register */
++
++
++/*-------Structure Definitions------------*/
++
++typedef struct VLYNQ_MEMORY_MAP_t
++{
++ unsigned int Txmap;
++ unsigned int RxOffset[VLYNQ_MAX_MEMORY_REGIONS];
++ unsigned int RxSize[VLYNQ_MAX_MEMORY_REGIONS];
++}VLYNQ_MEMORY_MAP;
++
++
++/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt
++ * settings in vlynq Control register */
++typedef struct VLYNQ_INTERRUPT_CNTRL_t
++{
++ /* vlynq interrupts handled by host or remote - maps to
++ * intLocal bit in vlynq control register */
++ VLYNQ_LOCAL_INT_CONFIG intLocal;
++
++ /* remote interrupts handled by vlynq isr or host system
++ * interrupt controller - maps to the int2Cfg in vlynq
++ * control register */
++ VLYNQ_REMOTE_INT_CONFIG intRemote;
++
++ /* bit in pending/set register used for module interrupts*/
++ unsigned int map_vector;
++
++ /* used only if remote interrupts are to be handled by system ISR*/
++ unsigned int intr_ptr;
++
++}VLYNQ_INTERRUPT_CNTRL;
++
++
++/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold
++ * the interrupt dispatch table. The vlynq_root_isr() indexes into this
++ * table to identify the ISR to be invoked
++ */
++typedef struct VLYNQ_INTR_CNTRL_ICB_t
++{
++ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */
++ void *arg1 ; /* Arg 1 for the ISR */
++ void *arg2 ; /* Arg 2 for the ISR */
++ void *arg3 ; /* Arg 3 for the ISR */
++ unsigned int isrCount; /* number of ISR invocations so far */
++ struct VLYNQ_INTR_CNTRL_ICB_t *next;
++}VLYNQ_INTR_CNTRL_ICB;
++
++/* overlay of vlynq register set */
++typedef struct VLYNQ_REG_SET_t
++{
++ unsigned int revision; /*offset : 0x00 */
++ unsigned int control; /* 0x04*/
++ unsigned int status; /* 0x08*/
++ unsigned int pad1; /* 0x0c*/
++ unsigned int intStatus; /*0x10*/
++ unsigned int intPending; /*0x14*/
++ unsigned int intPtr; /*0x18*/
++ unsigned int txMap; /*0x1C*/
++ unsigned int rxSize1; /*0x20*/
++ unsigned int rxOffset1; /*0x24*/
++ unsigned int rxSize2; /*0x28*/
++ unsigned int rxOffset2; /*0x2C*/
++ unsigned int rxSize3; /*0x30*/
++ unsigned int rxOffset3; /*0x34*/
++ unsigned int rxSize4; /*0x38*/
++ unsigned int rxOffset4; /*0x3C*/
++ unsigned int chipVersion; /*0x40*/
++ unsigned int pad2[8];
++ unsigned int ivr30; /*0x60*/
++ unsigned int ivr74; /*0x64*/
++ unsigned int pad3[7];
++}VLYNQ_REG_SET;
++
++
++typedef struct VLYNQ_DEV_t
++{
++ /** module index:1,2,3... used for debugging purposes */
++ unsigned int dev_idx;
++
++ /*VLYNQ module base address */
++ unsigned int module_base;
++
++ /* clock source selection */
++ VLYNQ_CLK_SOURCE clk_source;
++
++ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */
++ unsigned int clk_div;
++
++ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */
++ VLYNQ_DRV_STATE state;
++
++ /* Valid VLYNQ bus width, filled by driver */
++ VLYNQ_BUS_WIDTH width;
++
++ /* local memory mapping */
++ VLYNQ_MEMORY_MAP local_mem;
++
++ /* remote memory mapping */
++ VLYNQ_MEMORY_MAP remote_mem;
++
++ /* Local module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL local_irq;
++
++ /* remote module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL remote_irq;
++
++ /*** ICB related fields **/
++
++ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) +
++ * expansion slots for shared interrupts*/
++ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS];
++ VLYNQ_INTR_CNTRL_ICB *freelist;
++
++ /* table holding mapping between intVector and the bit position the interrupt
++ * is mapped to(mapVector)*/
++ char vector_map[32];
++
++ /* user callback for vlynq events, NULL if unused */
++ VLYNQ_REPORT_CB report_cb;
++
++ /* user callback for resetting/realeasing remote device */
++ VLYNQ_RESET_REMOTE reset_cb;
++
++ /*** Handles provided for direct access to register set if need be
++ * Must be intialized to point to appropriate address during
++ * vlynq_init */
++ volatile VLYNQ_REG_SET * local;
++ volatile VLYNQ_REG_SET * remote;
++
++ unsigned int intCount; /* number of interrupts generated so far */
++ unsigned int isrCount; /* number of ISR invocations so far */
++}VLYNQ_DEV;
++
++
++typedef struct VLYNQ_ISR_ARGS_t
++{
++ int irq;
++ void * arg;
++ void * regset;
++}VLYNQ_ISR_ARGS;
++
++
++/****************************************
++ * Function Prototypes *
++ * API exported by generic vlynq driver *
++ ****************************************/
++/* Initialization function */
++int vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options);
++
++/* Check vlynq link */
++unsigned int vlynq_link_check( VLYNQ_DEV * pdev);
++
++/* Set interrupt vector in local or remote device */
++int vlynq_interrupt_vector_set( VLYNQ_DEV *pdev,
++ unsigned int int_vector,
++ unsigned int map_vector,
++ VLYNQ_DEV_TYPE dev,
++ VLYNQ_INTR_POLARITY pol,
++ VLYNQ_INTR_TYPE type);
++
++
++int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++ unsigned int int_vector,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int enable);
++
++unsigned int vlynq_interrupt_get_count( VLYNQ_DEV *pdev,
++ unsigned int map_vector);
++
++int vlynq_install_isr( VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ VLYNQ_INTR_CNTRL_ISR isr,
++ void *arg1, void *arg2, void *arg3);
++
++int vlynq_uninstall_isr( VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ void *arg1, void *arg2, void *arg3);
++
++
++void vlynq_root_isr(void *arg);
++
++void vlynq_delay(unsigned int clktime);
++
++/* The following functions, provide better granularity in setting
++ * interrupt parameters. (for better support of linux INT Controller)
++ * Note: The interrupt source is identified by "map_vector"- the bit
++ * position in interrupt status register*/
++
++int vlynq_interrupt_vector_map(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int int_vector,
++ unsigned int map_vector);
++
++int vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector,
++ VLYNQ_INTR_POLARITY pol);
++
++int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector);
++
++int vlynq_interrupt_set_type(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector,
++ VLYNQ_INTR_TYPE type);
++
++int vlynq_interrupt_get_type( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector);
++
++int vlynq_interrupt_enable(VLYNQ_DEV* pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector);
++
++int vlynq_interrupt_disable(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector);
++
++
++
++
++
++#endif /* _VLYNQ_HAL_H_ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq_hal.h linux.dev/include/asm-mips/ar7/vlynq_hal.h
+--- linux.old/include/asm-mips/ar7/vlynq_hal.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq_hal.h 2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,606 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/*********************************************************************************
++ * ------------------------------------------------------------------------------
++ * Module : vlynq_hal.h
++ * Description :
++ * This header file provides the set of functions exported by the
++ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper.
++ * ------------------------------------------------------------------------------
++ *********************************************************************************/
++
++#ifndef _VLYNQ_HAL_H_
++#define _VLYNQ_HAL_H_
++
++#include <asm/ar7/avalanche_types.h>
++#include <asm/ar7/vlynq_hal_params.h>
++
++#ifndef PRIVATE
++#define PRIVATE static
++#endif
++
++#ifndef GLOBAL
++#define GLOBAL
++#endif
++
++/* Enable/Disable debug feature */
++#undef VLYNQ_DEBUG
++
++#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */
++#define debugPrint(format,args...)
++#else
++#define debugPrint(format,args...)
++#endif
++
++/* Error defines */
++#define VLYNQ_SUCCESS 0
++
++#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */
++#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1)
++#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2)
++#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3)
++#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4)
++#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5)
++#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6)
++#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7)
++
++/* Vlynq Defines and Macros */
++
++#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */
++
++/* Base address of module */
++#define VLYNQ_BASE (pdev->module_base)
++
++#define VLYNQ_REMOTE_REGS_OFFSET 0x0080
++
++#define VLYNQ_REV_OFFSET 0x0000
++#define VLYNQ_CTRL_OFFSET 0x0004
++#define VLYNQ_STATUS_OFFSET 0x0008
++#define VLYNQ_INT_STAT_OFFSET 0x0010
++#define VLYNQ_INT_PEND_OFFSET 0x0014
++#define VLYNQ_INT_PTR_OFFSET 0x0018
++#define VLYNQ_TXMAP_OFFSET 0x001c
++
++#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020
++#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024
++
++#define VLYNQ_CHIP_VER_OFFSET 0x0040
++#define VLYNQ_IVR_REGS_OFFSET 0x0060
++
++#define VLYNQ_INT_PENDING_REG_PTR 0x14
++#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14
++
++#define VLYNQ_REV_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_REV_OFFSET))
++#define VLYNQ_CTRL_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET))
++#define VLYNQ_STATUS_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET))
++#define VLYNQ_INT_STAT_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET))
++#define VLYNQ_INT_PEND_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET))
++#define VLYNQ_INT_PTR_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET))
++#define VLYNQ_TXMAP_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_SIZE_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_OFFSET_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3)))
++
++#define VLYNQ_CHIP_VER_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET))
++
++/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */
++#define VLYNQ_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) )
++
++#define VLYNQ_IVR_03TO00_REG *((volatile UINT32*) (VLYNQ_IVR_OFFSET(0)) )
++#define VLYNQ_IVR_07TO04_REG *((volatile UINT32*) (VLYNQ_IVR_OFFSET(4)) )
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++
++#define VLYNQ_IVR_INTEN(ivr) (((UINT32)(0x80)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTTYPE(ivr) (((UINT32)(0x40)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTPOL(ivr) (((UINT32)(0x20)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTVEC(ivr) (((UINT32)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTALL(ivr) (((UINT32)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8))
++
++
++
++/*********************************
++ * Remote VLYNQ register set *
++ *********************************/
++
++#define VLYNQ_R_REV_OFFSET 0x0080
++#define VLYNQ_R_CTRL_OFFSET 0x0084
++#define VLYNQ_R_STATUS_OFFSET 0x0088
++#define VLYNQ_R_INT_STAT_OFFSET 0x0090
++#define VLYNQ_R_INT_PEND_OFFSET 0x0094
++#define VLYNQ_R_INT_PTR_OFFSET 0x0098
++#define VLYNQ_R_TXMAP_OFFSET 0x009c
++
++#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0
++#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4
++
++#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0
++#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0
++
++#define VLYNQ_R_REV_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET))
++#define VLYNQ_R_CTRL_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET))
++#define VLYNQ_R_STATUS_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET))
++#define VLYNQ_R_INT_STAT_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET))
++#define VLYNQ_R_INT_PEND_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET))
++#define VLYNQ_R_INT_PTR_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET))
++#define VLYNQ_R_TXMAP_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_SIZE_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_OFFSET_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3)))
++
++#define VLYNQ_R_CHIP_VER_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET)
++
++#define VLYNQ_R_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3))
++
++
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++#define VLYNQ_R_IVR_03TO00_REG *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(0)) )
++#define VLYNQ_R_IVR_07TO04_REG *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(4)) )
++
++
++/****End of remote register set definition******/
++
++
++/*** Masks for individual register fields ***/
++
++#define VLYNQ_MODULE_ID_MASK 0xffff0000
++#define VLYNQ_MAJOR_REV_MASK 0x0000ff00
++#define VLYNQ_MINOR_REV_MASK 0x000000ff
++
++
++#define VLYNQ_CTL_ILOOP_MASK 0x00000002
++#define VLYNQ_CTL_INT2CFG_MASK 0x00000080
++#define VLYNQ_CTL_INTVEC_MASK 0x00001f00
++#define VLYNQ_CTL_INTEN_MASK 0x00002000
++#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000
++#define VLYNQ_CTL_CLKDIR_MASK 0x00008000
++#define VLYNQ_CTL_CLKDIV_MASK 0x00070000
++#define VLYNQ_CTL_MODE_MASK 0x00e00000
++
++
++#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */
++#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */
++#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */
++#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */
++#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */
++#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */
++#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */
++#define VLYNQ_STS_OFLOW_MASK 0x00000200
++#define VLYNQ_STS_IFLOW_MASK 0x00000400
++#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */
++#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */
++#define VLYNQ_STS_DEBUG_MASK 0xE0000000
++
++#define VLYNQ_CTL_INTVEC_SHIFT 0x08
++#define VLYNQ_CTL_INTEN_SHIFT 0x0D
++#define VLYNQ_CTL_INT2CFG_SHIFT 0x07
++#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E
++
++#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80
++
++#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000
++#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff
++
++#define VLYNQ_IVR_INTEN_MASK 0x80
++#define VLYNQ_IVR_INTTYPE_MASK 0x40
++#define VLYNQ_IVR_INTPOL_MASK 0x20
++
++
++/**** Helper macros ****/
++
++#define VLYNQ_RESETCB(arg) \
++ if( pdev->reset_cb != NULL) \
++ { \
++ (pdev->reset_cb)(pdev, (arg)); \
++ }
++
++#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 )
++#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 )
++
++#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo)))
++#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo)))
++
++#define VLYNQ_ALIGN4(x) (x)=(x)&(~3)
++
++
++/*************************************
++ * Enums *
++ *************************************/
++
++/* Initialization options define what operations are
++ * undertaken during vlynq module initialization */
++typedef enum
++{
++ /* Init host local memory regions.This allows
++ * local host access remote memory regions */
++ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01,
++ /* Init host remote memory regions.This allows
++ * remote device access local memory regions */
++ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02,
++ /* Init local interrupt config*/
++ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04,
++ /* Init remote interrupt config*/
++ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08,
++ /* Check link during initialization*/
++ VLYNQ_INIT_CHECK_LINK =0x10,
++ /* configure clock during init */
++ VLYNQ_INIT_CONFIG_CLOCK =0x20,
++ /* Clear errors during init */
++ VLYNQ_INIT_CLEAR_ERRORS =0x40,
++ /* All options */
++ VLYNQ_INIT_PERFORM_ALL =0x7F
++}VLYNQ_INIT_OPTIONS;
++
++
++/* VLYNQ_DEV_TYPE identifies local or remote device */
++typedef enum
++{
++ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */
++ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */
++}VLYNQ_DEV_TYPE;
++
++
++/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */
++typedef enum
++{
++ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/
++ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */
++ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */
++}VLYNQ_CLK_SOURCE;
++
++
++/* VLYNQ_DRV_STATE indicates the current driver state */
++typedef enum
++{
++ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */
++ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */
++ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */
++ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */
++ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */
++}VLYNQ_DRV_STATE;
++
++
++/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */
++typedef enum
++{
++ VLYNQ_BUS_WIDTH_3 = 3,
++ VLYNQ_BUS_WIDTH_5 = 5,
++ VLYNQ_BUS_WIDTH_7 = 7,
++ VLYNQ_BUS_WIDTH_9 = 9
++}VLYNQ_BUS_WIDTH;
++
++
++/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq
++ * interrupts are processed by the host or passed on to the
++ * remote device.
++ */
++typedef enum
++{
++ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */
++ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */
++}VLYNQ_LOCAL_INT_CONFIG;
++
++
++/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote
++ * interrupts are to be handled by the SOC system ISR
++ * or via the vlynq root ISR
++ */
++typedef enum
++{
++ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */
++ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */
++}VLYNQ_REMOTE_INT_CONFIG;
++
++
++/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */
++typedef enum
++{
++ VLYNQ_INTR_ACTIVE_HIGH = 0,
++ VLYNQ_INTR_ACTIVE_LOW = 1
++}VLYNQ_INTR_POLARITY;
++
++
++/* VLYNQ_INTR_TYPE - vlynq interrupt type */
++typedef enum
++{
++ VLYNQ_INTR_LEVEL = 0,
++ VLYNQ_INTR_PULSED = 1
++}VLYNQ_INTR_TYPE;
++
++
++/* VLYNQ_RESET_MODE - vlynq reset mode */
++typedef enum
++{
++ VLYNQ_RESET_ASSERT, /* hold device in reset state */
++ VLYNQ_RESET_DEASSERT, /* release device from reset state */
++ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */
++ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */
++ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */
++ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */
++}VLYNQ_RESET_MODE;
++
++
++
++/*************************************
++ * Typedefs *
++ *************************************/
++
++struct VLYNQ_DEV_t; /*forward declaration*/
++
++/*--------Function Pointers defintions -----------*/
++
++/* prototype for interrupt handler definition */
++typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3);
++
++typedef void
++(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode);
++
++typedef void
++(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */
++ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */
++ UINT32 dwStatRegVal); /* Value of the relevant status register */
++
++
++/*-------Structure Definitions------------*/
++
++typedef struct VLYNQ_MEMORY_MAP_t
++{
++ UINT32 Txmap;
++ UINT32 RxOffset[VLYNQ_MAX_MEMORY_REGIONS];
++ UINT32 RxSize[VLYNQ_MAX_MEMORY_REGIONS];
++}VLYNQ_MEMORY_MAP;
++
++
++/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt
++ * settings in vlynq Control register */
++typedef struct VLYNQ_INTERRUPT_CNTRL_t
++{
++ /* vlynq interrupts handled by host or remote - maps to
++ * intLocal bit in vlynq control register */
++ VLYNQ_LOCAL_INT_CONFIG intLocal;
++
++ /* remote interrupts handled by vlynq isr or host system
++ * interrupt controller - maps to the int2Cfg in vlynq
++ * control register */
++ VLYNQ_REMOTE_INT_CONFIG intRemote;
++
++ /* bit in pending/set register used for module interrupts*/
++ UINT32 map_vector;
++
++ /* used only if remote interrupts are to be handled by system ISR*/
++ UINT32 intr_ptr;
++
++}VLYNQ_INTERRUPT_CNTRL;
++
++
++/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold
++ * the interrupt dispatch table. The vlynq_root_isr() indexes into this
++ * table to identify the ISR to be invoked
++ */
++typedef struct VLYNQ_INTR_CNTRL_ICB_t
++{
++ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */
++ void *arg1 ; /* Arg 1 for the ISR */
++ void *arg2 ; /* Arg 2 for the ISR */
++ void *arg3 ; /* Arg 3 for the ISR */
++ UINT32 isrCount; /* number of ISR invocations so far */
++ struct VLYNQ_INTR_CNTRL_ICB_t *next;
++}VLYNQ_INTR_CNTRL_ICB;
++
++/* overlay of vlynq register set */
++typedef struct VLYNQ_REG_SET_t
++{
++ UINT32 revision; /*offset : 0x00 */
++ UINT32 control; /* 0x04*/
++ UINT32 status; /* 0x08*/
++ UINT32 pad1; /* 0x0c*/
++ UINT32 intStatus; /*0x10*/
++ UINT32 intPending; /*0x14*/
++ UINT32 intPtr; /*0x18*/
++ UINT32 txMap; /*0x1C*/
++ UINT32 rxSize1; /*0x20*/
++ UINT32 rxOffset1; /*0x24*/
++ UINT32 rxSize2; /*0x28*/
++ UINT32 rxOffset2; /*0x2C*/
++ UINT32 rxSize3; /*0x30*/
++ UINT32 rxOffset3; /*0x34*/
++ UINT32 rxSize4; /*0x38*/
++ UINT32 rxOffset4; /*0x3C*/
++ UINT32 chipVersion; /*0x40*/
++ UINT32 pad2[8];
++ UINT32 ivr30; /*0x60*/
++ UINT32 ivr74; /*0x64*/
++ UINT32 pad3[7];
++}VLYNQ_REG_SET;
++
++
++typedef struct VLYNQ_DEV_t
++{
++ /** module index:1,2,3... used for debugging purposes */
++ UINT32 dev_idx;
++
++ /*VLYNQ module base address */
++ UINT32 module_base;
++
++ /* clock source selection */
++ VLYNQ_CLK_SOURCE clk_source;
++
++ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */
++ UINT32 clk_div;
++
++ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */
++ VLYNQ_DRV_STATE state;
++
++ /* Valid VLYNQ bus width, filled by driver */
++ VLYNQ_BUS_WIDTH width;
++
++ /* local memory mapping */
++ VLYNQ_MEMORY_MAP local_mem;
++
++ /* remote memory mapping */
++ VLYNQ_MEMORY_MAP remote_mem;
++
++ /* Local module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL local_irq;
++
++ /* remote module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL remote_irq;
++
++ /*** ICB related fields **/
++
++ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) +
++ * expansion slots for shared interrupts*/
++ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS];
++ VLYNQ_INTR_CNTRL_ICB *freelist;
++
++ /* table holding mapping between intVector and the bit position the interrupt
++ * is mapped to(mapVector)*/
++ INT8 vector_map[32];
++
++ /* user callback for vlynq events, NULL if unused */
++ VLYNQ_REPORT_CB report_cb;
++
++ /* user callback for resetting/realeasing remote device */
++ VLYNQ_RESET_REMOTE reset_cb;
++
++ /*** Handles provided for direct access to register set if need be
++ * Must be intialized to point to appropriate address during
++ * vlynq_init */
++ volatile VLYNQ_REG_SET * local;
++ volatile VLYNQ_REG_SET * remote;
++
++ UINT32 intCount; /* number of interrupts generated so far */
++ UINT32 isrCount; /* number of ISR invocations so far */
++}VLYNQ_DEV;
++
++
++typedef struct VLYNQ_ISR_ARGS_t
++{
++ int irq;
++ void * arg;
++ void * regset;
++}VLYNQ_ISR_ARGS;
++
++
++/****************************************
++ * Function Prototypes *
++ * API exported by generic vlynq driver *
++ ****************************************/
++/* Initialization function */
++GLOBAL INT32 vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options);
++
++/* Check vlynq link */
++GLOBAL UINT32 vlynq_link_check( VLYNQ_DEV * pdev);
++
++/* Set interrupt vector in local or remote device */
++GLOBAL INT32 vlynq_interrupt_vector_set( VLYNQ_DEV *pdev,
++ UINT32 int_vector,
++ UINT32 map_vector,
++ VLYNQ_DEV_TYPE dev,
++ VLYNQ_INTR_POLARITY pol,
++ VLYNQ_INTR_TYPE type);
++
++
++GLOBAL INT32 vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++ UINT32 int_vector,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 enable);
++
++GLOBAL UINT32 vlynq_interrupt_get_count( VLYNQ_DEV *pdev,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_install_isr( VLYNQ_DEV *pdev,
++ UINT32 map_vector,
++ VLYNQ_INTR_CNTRL_ISR isr,
++ void *arg1, void *arg2, void *arg3);
++
++GLOBAL INT32 vlynq_uninstall_isr( VLYNQ_DEV *pdev,
++ UINT32 map_vector,
++ void *arg1, void *arg2, void *arg3);
++
++
++GLOBAL void vlynq_root_isr(void *arg);
++
++GLOBAL void vlynq_delay(UINT32 clktime);
++
++/* The following functions, provide better granularity in setting
++ * interrupt parameters. (for better support of linux INT Controller)
++ * Note: The interrupt source is identified by "map_vector"- the bit
++ * position in interrupt status register*/
++
++GLOBAL INT32 vlynq_interrupt_vector_map(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 int_vector,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector,
++ VLYNQ_INTR_POLARITY pol);
++
++GLOBAL INT32 vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_set_type(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector,
++ VLYNQ_INTR_TYPE type);
++
++GLOBAL INT32 vlynq_interrupt_get_type( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_enable(VLYNQ_DEV* pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_disable(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector);
++
++
++
++
++
++#endif /* _VLYNQ_HAL_H_ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq_hal_params.h linux.dev/include/asm-mips/ar7/vlynq_hal_params.h
+--- linux.old/include/asm-mips/ar7/vlynq_hal_params.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq_hal_params.h 2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,50 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/* This file defines Vlynq module parameters*/
++
++#ifndef _VLYNQ_HAL_PARAMS_H
++#define _VLYNQ_HAL_PARAMS_H
++
++ /* number of VLYNQ memory regions supported */
++#define VLYNQ_MAX_MEMORY_REGIONS 0x04
++
++ /* Max.number of external interrupt inputs supported by VLYNQ module */
++#define VLYNQ_IVR_MAXIVR 0x08
++
++#define VLYNQ_CLK_DIV_MAX 0x08
++#define VLYNQ_CLK_DIV_MIN 0x01
++
++
++/*** the total number of entries allocated for ICB would be
++ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/
++#define VLYNQ_IVR_CHAIN_SLOTS 10
++
++
++#endif /* _VLYNQ_HAL_PARAMS_H */
+diff -urN linux.old/include/asm-mips/io.h linux.dev/include/asm-mips/io.h
+--- linux.old/include/asm-mips/io.h 2003-08-25 13:44:43.000000000 +0200
++++ linux.dev/include/asm-mips/io.h 2005-11-10 01:14:16.400733500 +0100
+@@ -61,9 +61,9 @@
+ * Change "struct page" to physical address.
+ */
+ #ifdef CONFIG_64BIT_PHYS_ADDR
+-#define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT)
++#define page_to_phys(page) (((u64)(page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET)
+ #else
+-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
++#define page_to_phys(page) (((page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET)
+ #endif
+
+ #define IO_SPACE_LIMIT 0xffff
+diff -urN linux.old/include/asm-mips/irq.h linux.dev/include/asm-mips/irq.h
+--- linux.old/include/asm-mips/irq.h 2003-08-25 13:44:43.000000000 +0200
++++ linux.dev/include/asm-mips/irq.h 2005-11-10 01:12:43.950955750 +0100
+@@ -14,7 +14,20 @@
+ #include <linux/config.h>
+ #include <linux/linkage.h>
+
++#ifdef CONFIG_AR7
++/* MIPS has 8 irqs
++ * AR7 has 40 primary and 32 secondary irqs
++ * vlynq0 has 32 irqs
++ * vlynq1 has 32 irqs
++ */
++#ifdef CONFIG_AR7_VLYNQ
++#define NR_IRQS (80 + 32 * CONFIG_AR7_VLYNQ_PORTS)
++#else
++#define NR_IRQS 80
++#endif
++#else
+ #define NR_IRQS 128 /* Largest number of ints of all machines. */
++#endif
+
+ #ifdef CONFIG_I8259
+ static inline int irq_cannonicalize(int irq)
+diff -urN linux.old/include/asm-mips/mips-boards/prom.h linux.dev/include/asm-mips/mips-boards/prom.h
+--- linux.old/include/asm-mips/mips-boards/prom.h 2001-09-09 19:43:02.000000000 +0200
++++ linux.dev/include/asm-mips/mips-boards/prom.h 2005-11-10 01:14:16.436735750 +0100
+@@ -33,7 +33,7 @@
+ extern void prom_init_cmdline(void);
+ extern void prom_meminit(void);
+ extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+-extern void prom_free_prom_memory (void);
++extern unsigned long prom_free_prom_memory (void);
+ extern void mips_display_message(const char *str);
+ extern void mips_display_word(unsigned int num);
+ extern int get_ethernet_addr(char *ethernet_addr);
+diff -urN linux.old/include/asm-mips/page.h linux.dev/include/asm-mips/page.h
+--- linux.old/include/asm-mips/page.h 2004-02-18 14:36:32.000000000 +0100
++++ linux.dev/include/asm-mips/page.h 2005-11-10 01:14:16.436735750 +0100
+@@ -12,6 +12,7 @@
+
+ #include <linux/config.h>
+ #include <asm/break.h>
++#include <asm/addrspace.h>
+
+ #ifdef __KERNEL__
+
+@@ -129,7 +130,7 @@
+
+ #define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
+ #define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
+-#define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT))
++#define virt_to_page(kaddr) (mem_map + ((__pa(kaddr)-PHYS_OFFSET) >> PAGE_SHIFT))
+ #define VALID_PAGE(page) ((page - mem_map) < max_mapnr)
+
+ #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgtable-32.h
+--- linux.old/include/asm-mips/pgtable-32.h 2004-02-18 14:36:32.000000000 +0100
++++ linux.dev/include/asm-mips/pgtable-32.h 2005-11-10 01:14:16.436735750 +0100
+@@ -108,7 +108,7 @@
+ * and a page entry and page directory to the page they refer to.
+ */
+
+-#ifdef CONFIG_CPU_VR41XX
++#if defined(CONFIG_CPU_VR41XX)
+ #define mk_pte(page, pgprot) \
+ ({ \
+ pte_t __pte; \
+@@ -123,13 +123,14 @@
+ ({ \
+ pte_t __pte; \
+ \
+- pte_val(__pte) = ((phys_t)(page - mem_map) << PAGE_SHIFT) | \
+- pgprot_val(pgprot); \
++ pte_val(__pte) = (((phys_t)(page - mem_map) << PAGE_SHIFT) + \
++ PHYS_OFFSET) | pgprot_val(pgprot); \
+ \
+ __pte; \
+ })
+ #endif
+
++
+ static inline pte_t mk_pte_phys(phys_t physpage, pgprot_t pgprot)
+ {
+ #ifdef CONFIG_CPU_VR41XX
+@@ -175,12 +176,12 @@
+ set_pte(ptep, __pte(0));
+ }
+
+-#ifdef CONFIG_CPU_VR41XX
++#if defined(CONFIG_CPU_VR41XX)
+ #define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> (PAGE_SHIFT+2)))))
+ #define __mk_pte(page_nr,pgprot) __pte(((page_nr) << (PAGE_SHIFT+2)) | pgprot_val(pgprot))
+ #else
+-#define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> PAGE_SHIFT))))
+-#define __mk_pte(page_nr,pgprot) __pte(((page_nr) << PAGE_SHIFT) | pgprot_val(pgprot))
++#define pte_page(x) (mem_map+((unsigned long)((((x).pte_low-PHYS_OFFSET) >> PAGE_SHIFT))))
++#define __mk_pte(page_nr,pgprot) __pte((((page_nr) << PAGE_SHIFT)+PHYS_OFFSET)|pgprot_val(pgprot))
+ #endif
+
+ #endif
+diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h
+--- linux.old/include/asm-mips/serial.h 2005-01-19 15:10:12.000000000 +0100
++++ linux.dev/include/asm-mips/serial.h 2005-11-10 01:14:16.436735750 +0100
+@@ -65,6 +65,16 @@
+
+ #define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+
++#ifdef CONFIG_AR7
++#include <asm/ar7/ar7.h>
++#include <asm/ar7/avalanche_intc.h>
++#define AR7_SERIAL_PORT_DEFNS \
++ { 0, AR7_BASE_BAUD, AR7_UART0_REGS_BASE, LNXINTNUM(AVALANCHE_UART0_INT), STD_COM_FLAGS }, \
++ { 0, AR7_BASE_BAUD, AR7_UART1_REGS_BASE, LNXINTNUM(AVALANCHE_UART1_INT), STD_COM_FLAGS },
++#else
++#define AR7_SERIAL_PORT_DEFNS
++#endif
++
+ #ifdef CONFIG_MIPS_JAZZ
+ #define _JAZZ_SERIAL_INIT(int, base) \
+ { .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \
+@@ -468,6 +478,7 @@
+ #endif
+
+ #define SERIAL_PORT_DFNS \
++ AR7_SERIAL_PORT_DEFNS \
+ ATLAS_SERIAL_PORT_DEFNS \
+ AU1000_SERIAL_PORT_DEFNS \
+ COBALT_SERIAL_PORT_DEFNS \
projects / openwrt.git / blobdiff