+++ /dev/null
-/*
- * $Id$
- *
- * Cellvision/SparkLAN boards
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_irq.h>
-
-#define CAS6XX_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-#define CAS7XX_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-#define NFS_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN5, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN5, 1);
- break;
- }
-}
-
-static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
- PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition cas6xx_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 32*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = 32*1024,
- } , {
- .name = "nvfs1",
- .offset = MTDPART_OFS_APPEND,
- .size = 64*1024,
- } , {
- .name = "nvfs2",
- .offset = MTDPART_OFS_APPEND,
- .size = 64*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition cas7xx_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 32*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = 32*1024,
- } , {
- .name = "nvfs",
- .offset = MTDPART_OFS_APPEND,
- .size = 128*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct platform_device *cas6xx_devices[] __initdata = {
- &adm5120_flash0_device,
-};
-
-static struct platform_device *cas7xx_devices[] __initdata = {
- &adm5120_flash0_device,
-};
-
-static void __init cas6xx_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
- adm5120_flash0_data.parts = cas6xx_partitions;
-
- adm5120_gpiodev_resource.start &= ~CAS6XX_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-static void __init cas7xx_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
- adm5120_flash0_data.parts = cas7xx_partitions;
-
- adm5120_gpiodev_resource.start &= ~CAS7XX_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-static void __init nfs_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
- adm5120_flash0_data.parts = cas6xx_partitions;
-
- adm5120_gpiodev_resource.start &= ~NFS_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-unsigned char nfs_vlans[6] = { /* TODO: not tested */
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(CAS630, "Cellvision CAS-630/630W")
- .board_setup = cas6xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas6xx_devices),
- .devices = cas6xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS670, "Cellvision CAS-670/670W")
- .board_setup = cas6xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas6xx_devices),
- .devices = cas6xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS700, "Cellvision CAS-700/700W")
- .board_setup = cas7xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas7xx_devices),
- .devices = cas7xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS771, "Cellvision CAS-771/771W")
- .board_setup = cas7xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas7xx_devices),
- .devices = cas7xx_devices,
- .pci_nr_irqs = ARRAY_SIZE(cas771_pci_irqs),
- .pci_irq_map = cas771_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS790, "Cellvision CAS-790")
- .board_setup = cas7xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas7xx_devices),
- .devices = cas7xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS861, "Cellvision CAS-861/861W")
- .board_setup = cas7xx_setup,
- .eth_num_ports = 1,
- .num_devices = ARRAY_SIZE(cas7xx_devices),
- .devices = cas7xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(NFS101U, "Cellvision NFS-101U/101WU")
- .board_setup = nfs_setup,
- .eth_num_ports = 5,
- .eth_vlans = nfs_vlans,
- .num_devices = ARRAY_SIZE(cas6xx_devices),
- .devices = cas6xx_devices,
- /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
projects / openwrt.git / blobdiff