brcm47xx: use libgpio instaed of implementing the gpio interface ourself.

[openwrt.git] / package / switch / src / switch-adm.c

diff --git a/package/switch/src/switch-adm.c b/package/switch/src/switch-adm.c
index 3826ca5..9a6d32b 100644 (file)
--- a/package/switch/src/switch-adm.c
+++ b/package/switch/src/switch-adm.c
@@ -104,7 +104,7 @@ static void adm_write(int cs, char *buf, unsigned int bits)
        int i, len = (bits + 7) / 8;
        __u8 mask;
 
-       gpio_out(eecs, (cs ? eecs : 0));
+       bcm47xx_gpio_out(eecs, (cs ? eecs : 0));
        udelay(EECK_EDGE_TIME);
 
        /* Byte assemble from MSB to LSB */
@@ -112,25 +112,25 @@ static void adm_write(int cs, char *buf, unsigned int bits)
                /* Bit bang from MSB to LSB */
                for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) {
                        /* Clock low */
-                       gpio_out(eesk, 0);
+                       bcm47xx_gpio_out(eesk, 0);
                        udelay(EECK_EDGE_TIME);
 
                        /* Output on rising edge */
-                       gpio_out(eedi, ((mask & buf[i]) ? eedi : 0));
+                       bcm47xx_gpio_out(eedi, ((mask & buf[i]) ? eedi : 0));
                        udelay(EEDI_SETUP_TIME);
 
                        /* Clock high */
-                       gpio_out(eesk, eesk);
+                       bcm47xx_gpio_out(eesk, eesk);
                        udelay(EECK_EDGE_TIME);
                }
        }
 
        /* Clock low */
-       gpio_out(eesk, 0);
+       bcm47xx_gpio_out(eesk, 0);
        udelay(EECK_EDGE_TIME);
 
        if (cs)
-               gpio_out(eecs, 0);
+               bcm47xx_gpio_out(eecs, 0);
 }
 
 
@@ -139,7 +139,7 @@ static void adm_read(int cs, char *buf, unsigned int bits)
        int i, len = (bits + 7) / 8;
        __u8 mask;
 
-       gpio_out(eecs, (cs ? eecs : 0));
+       bcm47xx_gpio_out(eecs, (cs ? eecs : 0));
        udelay(EECK_EDGE_TIME);
 
        /* Byte assemble from MSB to LSB */
@@ -151,16 +151,16 @@ static void adm_read(int cs, char *buf, unsigned int bits)
                        __u8 gp;
 
                        /* Clock low */
-                       gpio_out(eesk, 0);
+                       bcm47xx_gpio_out(eesk, 0);
                        udelay(EECK_EDGE_TIME);
 
                        /* Input on rising edge */
-                       gp = gpio_in();
+                       gp = bcm47xx_gpio_in(~0);
                        if (gp & eedi)
                                byte |= mask;
 
                        /* Clock high */
-                       gpio_out(eesk, eesk);
+                       bcm47xx_gpio_out(eesk, eesk);
                        udelay(EECK_EDGE_TIME);
                }
 
@@ -168,11 +168,11 @@ static void adm_read(int cs, char *buf, unsigned int bits)
        }
 
        /* Clock low */
-       gpio_out(eesk, 0);
+       bcm47xx_gpio_out(eesk, 0);
        udelay(EECK_EDGE_TIME);
 
        if (cs)
-               gpio_out(eecs, 0);
+               bcm47xx_gpio_out(eecs, 0);
 }
 
 
@@ -180,10 +180,10 @@ static void adm_read(int cs, char *buf, unsigned int bits)
 static void adm_enout(__u8 pins, __u8 val)
 {
        /* Prepare GPIO output value */
-       gpio_out(pins, val);
+       bcm47xx_gpio_out(pins, val);
 
        /* Enable GPIO outputs */
-       gpio_outen(pins, pins);
+       bcm47xx_gpio_outen(pins, pins);
        udelay(EECK_EDGE_TIME);
 }
 
@@ -192,7 +192,7 @@ static void adm_enout(__u8 pins, __u8 val)
 static void adm_disout(__u8 pins)
 {
        /* Disable GPIO outputs */
-       gpio_outen(pins, 0);
+       bcm47xx_gpio_outen(pins, 0);
        udelay(EECK_EDGE_TIME);
 }
 
@@ -203,11 +203,11 @@ static void adm_adclk(int clocks)
        int i;
        for (i = 0; i < clocks; i++) {
                /* Clock high */
-               gpio_out(eesk, eesk);
+               bcm47xx_gpio_out(eesk, eesk);
                udelay(EECK_EDGE_TIME);
 
                /* Clock low */
-               gpio_out(eesk, 0);
+               bcm47xx_gpio_out(eesk, 0);
                udelay(EECK_EDGE_TIME);
        }
 }