packages: clean up the package folder

[15.05/openwrt.git] / package / kernel / lantiq / ltq-atm / src / ifxmips_atm_fw_regs_danube.h

diff --git a/package/kernel/lantiq/ltq-atm/src/ifxmips_atm_fw_regs_danube.h b/package/kernel/lantiq/ltq-atm/src/ifxmips_atm_fw_regs_danube.h
new file mode 100644 (file)
index 0000000..9bdefdb
--- /dev/null
+++ b/package/kernel/lantiq/ltq-atm/src/ifxmips_atm_fw_regs_danube.h
@@ -0,0 +1,51 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_atm_fw_regs_danube.h
+** PROJECT      : UEIP
+** MODULES             : ATM (ADSL)
+**
+** DATE         : 1 AUG 2005
+** AUTHOR       : Xu Liang
+** DESCRIPTION  : ATM Driver (Firmware Registers)
+** COPYRIGHT    :      Copyright (c) 2006
+**                     Infineon Technologies AG
+**                     Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Date        $Author         $Comment
+**  4 AUG 2005  Xu Liang        Initiate Version
+** 23 OCT 2006  Xu Liang        Add GPL header.
+**  9 JAN 2007  Xu Liang        First version got from Anand (IC designer)
+*******************************************************************************/
+
+
+
+#ifndef IFXMIPS_ATM_FW_REGS_DANUBE_H
+#define IFXMIPS_ATM_FW_REGS_DANUBE_H
+
+#define FW_VER_ID                       ((volatile struct fw_ver_id *)      SB_BUFFER(0x2001))
+#define CFG_WRX_HTUTS                   SB_BUFFER(0x2400)   /*  WAN RX HTU Table Size, must be configured before enable PPE firmware.   */
+#define CFG_WRX_QNUM                    SB_BUFFER(0x2401)   /*  WAN RX Queue Number */
+#define CFG_WRX_DCHNUM                  SB_BUFFER(0x2402)   /*  WAN RX DMA Channel Number, no more than 8, must be configured before enable PPE firmware.   */
+#define CFG_WTX_DCHNUM                  SB_BUFFER(0x2403)   /*  WAN TX DMA Channel Number, no more than 16, must be configured before enable PPE firmware.  */
+#define CFG_WRDES_DELAY                 SB_BUFFER(0x2404)   /*  WAN Descriptor Write Delay, must be configured before enable PPE firmware.  */
+#define WRX_DMACH_ON                    SB_BUFFER(0x2405)   /*  WAN RX DMA Channel Enable, must be configured before enable PPE firmware.   */
+#define WTX_DMACH_ON                    SB_BUFFER(0x2406)   /*  WAN TX DMA Channel Enable, must be configured before enable PPE firmware.   */
+#define WRX_HUNT_BITTH                  SB_BUFFER(0x2407)   /*  WAN RX HUNT Threshold, must be between 2 to 8.  */
+
+#define WRX_QUEUE_CONFIG(i)             ((struct wrx_queue_config*)         SB_BUFFER(0x2500 + (i) * 20))
+#define WRX_DMA_CHANNEL_CONFIG(i)       ((struct wrx_dma_channel_config*)   SB_BUFFER(0x2640 + (i) * 7))
+#define WTX_PORT_CONFIG(i)              ((struct wtx_port_config*)          SB_BUFFER(0x2440 + (i)))
+#define WTX_QUEUE_CONFIG(i)             ((struct wtx_queue_config*)         SB_BUFFER(0x2710 + (i) * 27))
+#define WTX_DMA_CHANNEL_CONFIG(i)       ((struct wtx_dma_channel_config*)   SB_BUFFER(0x2711 + (i) * 27))
+#define WAN_MIB_TABLE                   ((struct wan_mib_table*)            SB_BUFFER(0x2410))
+#define HTU_ENTRY(i)                  ((struct htu_entry*)                SB_BUFFER(0x2000 + (i)))
+#define HTU_MASK(i)                   ((struct htu_mask*)                 SB_BUFFER(0x2020 + (i)))
+#define HTU_RESULT(i)                 ((struct htu_result*)               SB_BUFFER(0x2040 + (i)))
+
+#endif