+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* History: */
-/* 02/25/00 Hav Khauv Initial version. */
-/******************************************************************************/
-
-#ifndef LM_H
-#define LM_H
-
-#include "queue.h"
-#include "bits.h"
-
-
-
-/******************************************************************************/
-/* Basic types. */
-/******************************************************************************/
-
-typedef char LM_CHAR, *PLM_CHAR;
-typedef unsigned int LM_UINT, *PLM_UINT;
-typedef unsigned char LM_UINT8, *PLM_UINT8;
-typedef unsigned short LM_UINT16, *PLM_UINT16;
-typedef unsigned int LM_UINT32, *PLM_UINT32;
-typedef unsigned int LM_COUNTER, *PLM_COUNTER;
-typedef void LM_VOID, *PLM_VOID;
-typedef char LM_BOOL, *PLM_BOOL;
-
-/* 64bit value. */
-typedef struct {
-#ifdef BIG_ENDIAN_HOST
- LM_UINT32 High;
- LM_UINT32 Low;
-#else /* BIG_ENDIAN_HOST */
- LM_UINT32 Low;
- LM_UINT32 High;
-#endif /* !BIG_ENDIAN_HOST */
-} LM_UINT64, *PLM_UINT64;
-
-typedef LM_UINT64 LM_PHYSICAL_ADDRESS, *PLM_PHYSICAL_ADDRESS;
-
-/* void LM_INC_PHYSICAL_ADDRESS(PLM_PHYSICAL_ADDRESS pAddr,LM_UINT32 IncSize) */
-#define LM_INC_PHYSICAL_ADDRESS(pAddr, IncSize) \
- { \
- LM_UINT32 OrgLow; \
- \
- OrgLow = (pAddr)->Low; \
- (pAddr)->Low += IncSize; \
- if((pAddr)->Low < OrgLow) { \
- (pAddr)->High++; /* Wrap around. */ \
- } \
- }
-
-
-#ifndef TRUE
-#define TRUE 1
-#endif /* TRUE */
-
-#ifndef FALSE
-#define FALSE 0
-#endif /* FALSE */
-
-#ifndef NULL
-#define NULL ((void *) 0)
-#endif /* NULL */
-
-#ifndef OFFSETOF
-#define OFFSETOF(_s, _m) (MM_UINT_PTR(&(((_s *) 0)->_m)))
-#endif /* OFFSETOF */
-
-
-
-/******************************************************************************/
-/* Simple macros. */
-/******************************************************************************/
-
-#define IS_ETH_BROADCAST(_pEthAddr) \
- (((unsigned char *) (_pEthAddr))[0] == ((unsigned char) 0xff))
-
-#define IS_ETH_MULTICAST(_pEthAddr) \
- (((unsigned char *) (_pEthAddr))[0] & ((unsigned char) 0x01))
-
-#define IS_ETH_ADDRESS_EQUAL(_pEtherAddr1, _pEtherAddr2) \
- ((((unsigned char *) (_pEtherAddr1))[0] == \
- ((unsigned char *) (_pEtherAddr2))[0]) && \
- (((unsigned char *) (_pEtherAddr1))[1] == \
- ((unsigned char *) (_pEtherAddr2))[1]) && \
- (((unsigned char *) (_pEtherAddr1))[2] == \
- ((unsigned char *) (_pEtherAddr2))[2]) && \
- (((unsigned char *) (_pEtherAddr1))[3] == \
- ((unsigned char *) (_pEtherAddr2))[3]) && \
- (((unsigned char *) (_pEtherAddr1))[4] == \
- ((unsigned char *) (_pEtherAddr2))[4]) && \
- (((unsigned char *) (_pEtherAddr1))[5] == \
- ((unsigned char *) (_pEtherAddr2))[5]))
-
-#define COPY_ETH_ADDRESS(_Src, _Dst) \
- ((unsigned char *) (_Dst))[0] = ((unsigned char *) (_Src))[0]; \
- ((unsigned char *) (_Dst))[1] = ((unsigned char *) (_Src))[1]; \
- ((unsigned char *) (_Dst))[2] = ((unsigned char *) (_Src))[2]; \
- ((unsigned char *) (_Dst))[3] = ((unsigned char *) (_Src))[3]; \
- ((unsigned char *) (_Dst))[4] = ((unsigned char *) (_Src))[4]; \
- ((unsigned char *) (_Dst))[5] = ((unsigned char *) (_Src))[5];
-
-
-
-/******************************************************************************/
-/* Constants. */
-/******************************************************************************/
-
-#define ETHERNET_ADDRESS_SIZE 6
-#define ETHERNET_PACKET_HEADER_SIZE 14
-#define MIN_ETHERNET_PACKET_SIZE 64 /* with 4 byte crc. */
-#define MAX_ETHERNET_PACKET_SIZE 1518 /* with 4 byte crc. */
-#define MIN_ETHERNET_PACKET_SIZE_NO_CRC 60
-#define MAX_ETHERNET_PACKET_SIZE_NO_CRC 1514
-#define MAX_ETHERNET_PACKET_BUFFER_SIZE 1536 /* A nice even number. */
-#define MAX_ETHERNET_JUMBO_PACKET_SIZE_NO_CRC 9014
-
-#ifndef LM_MAX_MC_TABLE_SIZE
-#define LM_MAX_MC_TABLE_SIZE 32
-#endif /* LM_MAX_MC_TABLE_SIZE */
-#define LM_MC_ENTRY_SIZE (ETHERNET_ADDRESS_SIZE+1)
-#define LM_MC_INSTANCE_COUNT_INDEX (LM_MC_ENTRY_SIZE-1)
-
-
-/* Receive filter masks. */
-#define LM_ACCEPT_UNICAST 0x0001
-#define LM_ACCEPT_MULTICAST 0x0002
-#define LM_ACCEPT_ALL_MULTICAST 0x0004
-#define LM_ACCEPT_BROADCAST 0x0008
-#define LM_ACCEPT_ERROR_PACKET 0x0010
-#define LM_KEEP_VLAN_TAG 0x0020
-
-#define LM_PROMISCUOUS_MODE 0x10000
-
-
-
-/******************************************************************************/
-/* PCI registers. */
-/******************************************************************************/
-
-#define PCI_VENDOR_ID_REG 0x00
-#define PCI_DEVICE_ID_REG 0x02
-
-#define PCI_COMMAND_REG 0x04
-#define PCI_IO_SPACE_ENABLE 0x0001
-#define PCI_MEM_SPACE_ENABLE 0x0002
-#define PCI_BUSMASTER_ENABLE 0x0004
-#define PCI_MEMORY_WRITE_INVALIDATE 0x0010
-#define PCI_PARITY_ERROR_ENABLE 0x0040
-#define PCI_SYSTEM_ERROR_ENABLE 0x0100
-#define PCI_FAST_BACK_TO_BACK_ENABLE 0x0200
-
-#define PCI_STATUS_REG 0x06
-#define PCI_REV_ID_REG 0x08
-
-#define PCI_CACHE_LINE_SIZE_REG 0x0c
-
-#define PCI_IO_BASE_ADDR_REG 0x10
-#define PCI_IO_BASE_ADDR_MASK 0xfffffff0
-
-#define PCI_MEM_BASE_ADDR_LOW 0x10
-#define PCI_MEM_BASE_ADDR_HIGH 0x14
-
-#define PCI_SUBSYSTEM_VENDOR_ID_REG 0x2c
-#define PCI_SUBSYSTEM_ID_REG 0x2e
-#define PCI_INT_LINE_REG 0x3c
-
-#define PCIX_CAP_REG 0x40
-#define PCIX_ENABLE_RELAXED_ORDERING BIT_17
-
-/******************************************************************************/
-/* Fragment structure. */
-/******************************************************************************/
-
-typedef struct {
- LM_UINT32 FragSize;
- LM_PHYSICAL_ADDRESS FragBuf;
-} LM_FRAG, *PLM_FRAG;
-
-typedef struct {
- /* FragCount is initialized for the caller to the maximum array size, on */
- /* return FragCount is the number of the actual fragments in the array. */
- LM_UINT32 FragCount;
-
- /* Total buffer size. */
- LM_UINT32 TotalSize;
-
- /* Fragment array buffer. */
- LM_FRAG Fragments[1];
-} LM_FRAG_LIST, *PLM_FRAG_LIST;
-
-#define DECLARE_FRAG_LIST_BUFFER_TYPE(_FRAG_LIST_TYPE_NAME, _MAX_FRAG_COUNT) \
- typedef struct { \
- LM_FRAG_LIST FragList; \
- LM_FRAG FragListBuffer[_MAX_FRAG_COUNT-1]; \
- } _FRAG_LIST_TYPE_NAME, *P##_FRAG_LIST_TYPE_NAME
-
-
-
-/******************************************************************************/
-/* Status codes. */
-/******************************************************************************/
-
-#define LM_STATUS_SUCCESS 0
-#define LM_STATUS_FAILURE 1
-
-#define LM_STATUS_INTERRUPT_ACTIVE 2
-#define LM_STATUS_INTERRUPT_NOT_ACTIVE 3
-
-#define LM_STATUS_LINK_ACTIVE 4
-#define LM_STATUS_LINK_DOWN 5
-#define LM_STATUS_LINK_SETTING_MISMATCH 6
-
-#define LM_STATUS_TOO_MANY_FRAGMENTS 7
-#define LM_STATUS_TRANSMIT_ABORTED 8
-#define LM_STATUS_TRANSMIT_ERROR 9
-#define LM_STATUS_RECEIVE_ABORTED 10
-#define LM_STATUS_RECEIVE_ERROR 11
-#define LM_STATUS_INVALID_PACKET_SIZE 12
-#define LM_STATUS_OUT_OF_MAP_REGISTERS 13
-#define LM_STATUS_UNKNOWN_ADAPTER 14
-
-typedef LM_UINT LM_STATUS, *PLM_STATUS;
-
-
-/******************************************************************************/
-/* Line speed. */
-/******************************************************************************/
-
-#define LM_LINE_SPEED_UNKNOWN 0
-#define LM_LINE_SPEED_AUTO LM_LINE_SPEED_UNKNOWN
-#define LM_LINE_SPEED_10MBPS 10
-#define LM_LINE_SPEED_100MBPS 100
-#define LM_LINE_SPEED_1000MBPS 1000
-
-typedef LM_UINT32 LM_LINE_SPEED, *PLM_LINE_SPEED;
-
-
-
-/******************************************************************************/
-/* Duplex mode. */
-/******************************************************************************/
-
-#define LM_DUPLEX_MODE_UNKNOWN 0
-#define LM_DUPLEX_MODE_HALF 1
-#define LM_DUPLEX_MODE_FULL 2
-
-typedef LM_UINT32 LM_DUPLEX_MODE, *PLM_DUPLEX_MODE;
-
-
-
-/******************************************************************************/
-/* Power state. */
-/******************************************************************************/
-
-#define LM_POWER_STATE_D0 0
-#define LM_POWER_STATE_D1 1
-#define LM_POWER_STATE_D2 2
-#define LM_POWER_STATE_D3 3
-
-typedef LM_UINT32 LM_POWER_STATE, *PLM_POWER_STATE;
-
-
-
-/******************************************************************************/
-/* Task offloading. */
-/******************************************************************************/
-
-#define LM_TASK_OFFLOAD_NONE 0x0000
-#define LM_TASK_OFFLOAD_TX_IP_CHECKSUM 0x0001
-#define LM_TASK_OFFLOAD_RX_IP_CHECKSUM 0x0002
-#define LM_TASK_OFFLOAD_TX_TCP_CHECKSUM 0x0004
-#define LM_TASK_OFFLOAD_RX_TCP_CHECKSUM 0x0008
-#define LM_TASK_OFFLOAD_TX_UDP_CHECKSUM 0x0010
-#define LM_TASK_OFFLOAD_RX_UDP_CHECKSUM 0x0020
-#define LM_TASK_OFFLOAD_TCP_SEGMENTATION 0x0040
-
-typedef LM_UINT32 LM_TASK_OFFLOAD, *PLM_TASK_OFFLOAD;
-
-
-
-/******************************************************************************/
-/* Flow control. */
-/******************************************************************************/
-
-#define LM_FLOW_CONTROL_NONE 0x00
-#define LM_FLOW_CONTROL_RECEIVE_PAUSE 0x01
-#define LM_FLOW_CONTROL_TRANSMIT_PAUSE 0x02
-#define LM_FLOW_CONTROL_RX_TX_PAUSE (LM_FLOW_CONTROL_RECEIVE_PAUSE | \
- LM_FLOW_CONTROL_TRANSMIT_PAUSE)
-
-/* This value can be or-ed with RECEIVE_PAUSE and TRANSMIT_PAUSE. If the */
-/* auto-negotiation is disabled and the RECEIVE_PAUSE and TRANSMIT_PAUSE */
-/* bits are set, then flow control is enabled regardless of link partner's */
-/* flow control capability. */
-#define LM_FLOW_CONTROL_AUTO_PAUSE 0x80000000
-
-typedef LM_UINT32 LM_FLOW_CONTROL, *PLM_FLOW_CONTROL;
-
-
-
-/******************************************************************************/
-/* Wake up mode. */
-/******************************************************************************/
-
-#define LM_WAKE_UP_MODE_NONE 0
-#define LM_WAKE_UP_MODE_MAGIC_PACKET 1
-#define LM_WAKE_UP_MODE_NWUF 2
-#define LM_WAKE_UP_MODE_LINK_CHANGE 4
-
-typedef LM_UINT32 LM_WAKE_UP_MODE, *PLM_WAKE_UP_MODE;
-
-
-
-/******************************************************************************/
-/* Counters. */
-/******************************************************************************/
-
-#define LM_COUNTER_FRAMES_XMITTED_OK 0
-#define LM_COUNTER_FRAMES_RECEIVED_OK 1
-#define LM_COUNTER_ERRORED_TRANSMIT_COUNT 2
-#define LM_COUNTER_ERRORED_RECEIVE_COUNT 3
-#define LM_COUNTER_RCV_CRC_ERROR 4
-#define LM_COUNTER_ALIGNMENT_ERROR 5
-#define LM_COUNTER_SINGLE_COLLISION_FRAMES 6
-#define LM_COUNTER_MULTIPLE_COLLISION_FRAMES 7
-#define LM_COUNTER_FRAMES_DEFERRED 8
-#define LM_COUNTER_MAX_COLLISIONS 9
-#define LM_COUNTER_RCV_OVERRUN 10
-#define LM_COUNTER_XMIT_UNDERRUN 11
-#define LM_COUNTER_UNICAST_FRAMES_XMIT 12
-#define LM_COUNTER_MULTICAST_FRAMES_XMIT 13
-#define LM_COUNTER_BROADCAST_FRAMES_XMIT 14
-#define LM_COUNTER_UNICAST_FRAMES_RCV 15
-#define LM_COUNTER_MULTICAST_FRAMES_RCV 16
-#define LM_COUNTER_BROADCAST_FRAMES_RCV 17
-
-typedef LM_UINT32 LM_COUNTER_TYPE, *PLM_COUNTER_TYPE;
-
-
-typedef LM_UINT32 LM_RESET_TYPE;
-#define LM_SHUTDOWN_RESET 0
-#define LM_INIT_RESET 1
-#define LM_SUSPEND_RESET 2
-
-/******************************************************************************/
-/* Forward definition. */
-/******************************************************************************/
-
-typedef struct _LM_DEVICE_BLOCK *PLM_DEVICE_BLOCK;
-typedef struct _LM_PACKET *PLM_PACKET;
-
-
-
-/******************************************************************************/
-/* Function prototypes. */
-/******************************************************************************/
-
-LM_STATUS LM_GetAdapterInfo(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_InitializeAdapter(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_ResetAdapter(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_DisableInterrupt(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_EnableInterrupt(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_SendPacket(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS LM_ServiceInterrupts(PLM_DEVICE_BLOCK pDevice);
-#ifdef BCM_NAPI_RXPOLL
-int LM_ServiceRxPoll(PLM_DEVICE_BLOCK pDevice, int limit);
-#endif
-LM_STATUS LM_QueueRxPackets(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_SetReceiveMask(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask);
-LM_STATUS LM_Halt(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_Abort(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_MulticastAdd(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
-LM_STATUS LM_MulticastDel(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
-LM_STATUS LM_MulticastClear(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_SetMacAddress(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMacAddress);
-LM_STATUS LM_LoopbackAddress(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pAddress);
-
-LM_UINT32 LM_GetCrcCounter(PLM_DEVICE_BLOCK pDevice);
-
-LM_WAKE_UP_MODE LM_PMCapabilities(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_NwufAdd(PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
- LM_UINT8 *pByteMask, LM_UINT8 *pPattern);
-LM_STATUS LM_NwufRemove(PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
- LM_UINT8 *pByteMask, LM_UINT8 *pPattern);
-LM_STATUS LM_SetPowerState(PLM_DEVICE_BLOCK pDevice, LM_POWER_STATE PowerLevel);
-
-LM_VOID LM_ReadPhy(PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
- PLM_UINT32 pData32);
-LM_VOID LM_WritePhy(PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
- LM_UINT32 Data32);
-
-/* MII read/write functions to export to the robo support code */
-LM_UINT16 robo_miird(void *h, int phyadd, int regoff);
-void robo_miiwr(void *h, int phyadd, int regoff, LM_UINT16 value);
-
-
-LM_STATUS LM_EnableMacLoopBack(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_DisableMacLoopBack(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_EnablePhyLoopBack(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_DisablePhyLoopBack(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_EnableExtLoopBack(PLM_DEVICE_BLOCK pDevice, LM_LINE_SPEED Speed);
-LM_STATUS LM_DisableExtLoopBack(PLM_DEVICE_BLOCK pDevice);
-
-LM_STATUS LM_SetupPhy(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_BlinkLED(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDuration);
-LM_STATUS LM_GetStats(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_NvramRead(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT32 *pData);
-LM_STATUS LM_NvramWriteBlock(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT32 *pData, LM_UINT32 Size);
-LM_VOID LM_ResetPhy(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_ShutdownChip(PLM_DEVICE_BLOCK pDevice, LM_RESET_TYPE Mode);
-LM_STATUS LM_HaltCpu(PLM_DEVICE_BLOCK pDevice,LM_UINT32 cpu_number);
-LM_UINT32 ComputeCrc32(LM_UINT8 *pBuffer, LM_UINT32 BufferSize);
-LM_STATUS LM_SwitchClocks(PLM_DEVICE_BLOCK pDevice);
-
-void LM_5714_FamForceFiber( PLM_DEVICE_BLOCK pDevice);
-void LM_5714_FamGoFiberAutoNeg( PLM_DEVICE_BLOCK pDevice);
-void LM_5714_FamFiberCheckLink( PLM_DEVICE_BLOCK pDevice);
-
-/******************************************************************************/
-/* These are the OS specific functions called by LMAC. */
-/******************************************************************************/
-
-LM_STATUS MM_ReadConfig16(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT16 *pValue16);
-LM_STATUS MM_WriteConfig16(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT16 Value16);
-LM_STATUS MM_ReadConfig32(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT32 *pValue32);
-LM_STATUS MM_WriteConfig32(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT32 Value32);
-LM_STATUS MM_MapMemBase(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_MapIoBase(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_IndicateRxPackets(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_IndicateTxPackets(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_StartTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS MM_CompleteTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS MM_AllocateMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
- PLM_VOID *pMemoryBlockVirt);
-LM_STATUS MM_AllocateSharedMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
- PLM_VOID *pMemoryBlockVirt, PLM_PHYSICAL_ADDRESS pMemoryBlockPhy,
- LM_BOOL Cached);
-LM_STATUS MM_GetConfig(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_IndicateStatus(PLM_DEVICE_BLOCK pDevice, LM_STATUS Status);
-LM_STATUS MM_InitializeUmPackets(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_FreeRxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS MM_CoalesceTxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-PLM_DEVICE_BLOCK MM_FindPeerDev(PLM_DEVICE_BLOCK pDevice);
-int MM_FindCapability(PLM_DEVICE_BLOCK pDevice, int capability);
-LM_VOID MM_UnmapRxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-#ifdef BCM_NAPI_RXPOLL
-LM_STATUS MM_ScheduleRxPoll(PLM_DEVICE_BLOCK pDevice);
-#endif
-LM_STATUS MM_Sleep(PLM_DEVICE_BLOCK pDevice, LM_UINT32 msec);
-LM_STATUS LM_MbufWorkAround(PLM_DEVICE_BLOCK pDevice);
-
-#ifdef INCLUDE_5703_A0_FIX
-LM_STATUS LM_Load5703DmaWFirmware(PLM_DEVICE_BLOCK pDevice);
-#endif
-
-/* Debugging support */
-
-extern int b57_msg_level;
-
-#define B57_ERR_VAL 1
-#define B57_INFO_VAL 2
-
-#define B57_ERR(args) do {if (b57_msg_level & B57_ERR_VAL) printf args;} while (0)
-#define B57_INFO(args) do {if (b57_msg_level & B57_INFO_VAL) printf args;} while (0)
-
-#endif /* LM_H */
-
projects / openwrt.git / blobdiff