base-files: remove base-files-network, netifd is the only supported option now

[openwrt.git] / package / base-files-network / files / etc / hotplug.d / iface / 10-routes

diff --git a/package/base-files-network/files/etc/hotplug.d/iface/10-routes b/package/base-files-network/files/etc/hotplug.d/iface/10-routes
deleted file mode 100644 (file)
index d57a5b3..0000000
--- a/package/base-files-network/files/etc/hotplug.d/iface/10-routes
+++ /dev/null
@@ -1,137 +0,0 @@
-add_route() {
-       local config="$1"
-
-       # is this route intended for the
-       # $INTERFACE of this hotplug event
-       config_get interface "$config" interface
-       [ "$interface" != "$INTERFACE" ] && return 0
-       
-       # get the real interface name from network config
-       config_get dev "$interface" ifname
-
-       config_get target "$config" target
-       config_get netmask "$config" netmask
-       config_get gateway "$config" gateway
-       config_get metric "$config" metric
-       config_get mtu "$config" mtu
-
-       # make sure there is a gateway and a target
-       [ -n "$target" ] || {
-               echo "Missing target in route section $config"
-               return 1
-       }
-       [ -n "$gateway" ] || {
-               config_get gateway "$interface" gateway
-       }
-
-       # handle "0.0.0.0" as "no gateway given" to allow
-       # defining gateway-less routes while still keeping
-       # the possibility to have static routes with a
-       # proper gateway on interfaces with dynamic ips 
-       [ "$gateway" = "0.0.0.0" ] && gateway=""
-
-       dest="${netmask:+-net "$target" netmask "$netmask"}"
-       dest="${dest:--host "$target"}"
-       
-       /sbin/route add $dest ${gateway:+gw "$gateway"} \
-               ${dev:+dev "$dev"} ${metric:+ metric "$metric"} \
-               ${mtu:+mss "$mtu"}
-}
-
-add_route6() {
-       local config="$1"
-
-       # is this route intended for the
-       # $INTERFACE of this hotplug event
-       config_get interface "$config" interface
-       [ "$interface" != "$INTERFACE" ] && return 0
-       
-       # get the real interface name from network config
-       config_get dev "$interface" ifname
-
-       config_get target "$config" target
-       config_get gateway "$config" gateway
-       config_get metric "$config" metric
-       config_get mtu "$config" mtu
-
-       # make sure there is a gateway and a target
-       [ -n "$target" ] || {
-               echo "Missing target in route section $config"
-               return 1
-       }
-       [ -n "$gateway" ] || {
-               config_get gateway "$interface" gateway
-       }
-
-       /sbin/route -A inet6 add $target ${gateway:+gw "$gateway"} \
-               ${dev:+dev "$dev"} ${metric:+ metric "$metric"} \
-               ${mtu:+mss "$mtu"}
-}
-
-# Skip fake devices (e.g. relayd)
-grep -qs "^ *$DEVICE:" /proc/net/dev || exit 0
-
-case "$ACTION" in
-       ifup)
-               include /lib/network
-               scan_interfaces
-
-               # Setup aliases
-               config_set "$INTERFACE" aliases ""
-               config_set "$INTERFACE" alias_count 0
-               config_foreach setup_interface_alias alias "$INTERFACE" "$DEVICE"
-
-               # Save alias references in state vars
-               local aliases
-               config_get aliases "$INTERFACE" aliases
-               [ -z "$aliases" ] || uci_toggle_state network "$INTERFACE" aliases "$aliases"
-
-               # Make ip6addr of parent iface the main address again
-               local ip6addr
-               config_get ip6addr "$INTERFACE" ip6addr
-               [ -z "$ip6addr" ] || {
-                       ifconfig "$DEVICE" del "$ip6addr"
-                       ifconfig "$DEVICE" add "$ip6addr"
-               }
-               
-               # Setup sysctls
-               local proto accept_ra send_rs
-               
-               config_get proto "$INTERFACE" proto
-               if [ "$proto" = dhcp ]; then
-                       accept_ra=1
-                       send_rs=0
-               else
-                       accept_ra=0
-                       send_rs=1
-               fi
-
-               config_get_bool accept_ra "$INTERFACE" accept_ra $accept_ra
-               [ $accept_ra -eq 0 ] || {
-                       logger -t ifup "Allowing Router Advertisements on $INTERFACE ($DEVICE)"
-                       accept_ra=2
-               }
-               do_sysctl "net.ipv6.conf.$DEVICE.accept_ra" $accept_ra
-
-               config_get_bool send_rs "$INTERFACE" send_rs $send_rs
-               [ $send_rs -eq 0 ] || {
-                       logger -t ifup "Enabling Router Solicitations on $INTERFACE ($DEVICE)"
-                       send_rs=2
-               }
-               do_sysctl "net.ipv6.conf.$DEVICE.forwarding" $send_rs
-
-
-               # Setup routes
-               config_foreach "add_route" route
-               config_foreach "add_route6" route6
-       ;;
-       ifdown)
-               # Bring down named aliases
-               local device=$(uci_get_state network "$INTERFACE" device)
-               local ifn
-               for ifn in $(ifconfig | sed -ne "s/^\(\($DEVICE${device:+\|$device}\|br-$INTERFACE\):[^[:space:]]\+\).*/\1/p"); do
-                       ifconfig "$ifn" down
-               done
-       ;;
-esac
-