-diff -Nrub linux-2.6.14/drivers/net/Kconfig linux-2.6.14-imq/drivers/net/Kconfig
---- linux-2.6.14/drivers/net/Kconfig 2005-10-28 00:02:08.000000000 +0000
-+++ linux-2.6.14-imq/drivers/net/Kconfig 2005-12-16 16:28:05.000000000 +0000
-@@ -82,6 +82,129 @@
- To compile this driver as a module, choose M here: the module
- will be called eql. If unsure, say N.
-
-+config IMQ
-+ tristate "IMQ (intermediate queueing device) support"
-+ depends on NETDEVICES && NETFILTER
-+ ---help---
-+ The IMQ device(s) is used as placeholder for QoS queueing disciplines.
-+ Every packet entering/leaving the IP stack can be directed through
-+ the IMQ device where it's enqueued/dequeued to the attached qdisc.
-+ This allows you to treat network devices as classes and distribute
-+ bandwidth among them. Iptables is used to specify through which IMQ
-+ device, if any, packets travel.
-+
-+ More information at: http://www.linuximq.net/
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called imq. If unsure, say N.
-+
-+choice
-+ prompt "IMQ behavior (PRE/POSTROUTING)"
-+ depends on IMQ
-+ default IMQ_BEHAVIOR_BA
-+ help
-+
-+ This settings defines how IMQ behaves in respect to its
-+ hooking in PREROUTING and POSTROUTING.
-+
-+ IMQ can work in any of the following ways:
-+
-+ PREROUTING | POSTROUTING
-+ -----------------|-------------------
-+ #1 After NAT | After NAT
-+ #2 After NAT | Before NAT
-+ #3 Before NAT | After NAT
-+ #4 Before NAT | Before NAT
-+
-+ The default behavior is to hook before NAT on PREROUTING
-+ and after NAT on POSTROUTING (#3).
-+
-+ This settings are specially usefull when trying to use IMQ
-+ to shape NATed clients.
-+
-+ More information can be found at: www.linuximq.net
-+
-+ If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_AA
-+ bool "IMQ AA"
-+ help
-+ This settings defines how IMQ behaves in respect to its
-+ hooking in PREROUTING and POSTROUTING.
-+
-+ Choosing this option will make IMQ hook like this:
-+
-+ PREROUTING: After NAT
-+ POSTROUTING: After NAT
-+
-+ More information can be found at: www.linuximq.net
-+
-+ If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_AB
-+ bool "IMQ AB"
-+ help
-+ This settings defines how IMQ behaves in respect to its
-+ hooking in PREROUTING and POSTROUTING.
-+
-+ Choosing this option will make IMQ hook like this:
-+
-+ PREROUTING: After NAT
-+ POSTROUTING: Before NAT
-+
-+ More information can be found at: www.linuximq.net
-+
-+ If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_BA
-+ bool "IMQ BA"
-+ help
-+ This settings defines how IMQ behaves in respect to its
-+ hooking in PREROUTING and POSTROUTING.
-+
-+ Choosing this option will make IMQ hook like this:
-+
-+ PREROUTING: Before NAT
-+ POSTROUTING: After NAT
-+
-+ More information can be found at: www.linuximq.net
-+
-+ If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_BB
-+ bool "IMQ BB"
-+ help
-+ This settings defines how IMQ behaves in respect to its
-+ hooking in PREROUTING and POSTROUTING.
-+
-+ Choosing this option will make IMQ hook like this:
-+
-+ PREROUTING: Before NAT
-+ POSTROUTING: Before NAT
-+
-+ More information can be found at: www.linuximq.net
-+
-+ If not sure leave the default settings alone.
-+
-+endchoice
-+
-+config IMQ_NUM_DEVS
-+
-+ int "Number of IMQ devices"
-+ range 2 8
-+ depends on IMQ
-+ default "2"
-+ help
-+
-+ This settings defines how many IMQ devices will be
-+ created.
-+
-+ The default value is 2.
-+
-+ More information can be found at: www.linuximq.net
-+
-+ If not sure leave the default settings alone.
-+
- config TUN
- tristate "Universal TUN/TAP device driver support"
- select CRC32
-diff -Nrub linux-2.6.14/drivers/net/Makefile linux-2.6.14-imq/drivers/net/Makefile
---- linux-2.6.14/drivers/net/Makefile 2005-10-28 00:02:08.000000000 +0000
-+++ linux-2.6.14-imq/drivers/net/Makefile 2005-12-16 16:28:05.000000000 +0000
-@@ -119,6 +119,7 @@
- endif
-
- obj-$(CONFIG_DUMMY) += dummy.o
-+obj-$(CONFIG_IMQ) += imq.o
- obj-$(CONFIG_DE600) += de600.o
- obj-$(CONFIG_DE620) += de620.o
- obj-$(CONFIG_LANCE) += lance.o
-diff -Nrub linux-2.6.14/drivers/net/imq.c linux-2.6.14-imq/drivers/net/imq.c
---- linux-2.6.14/drivers/net/imq.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14-imq/drivers/net/imq.c 2005-12-16 16:49:02.000000000 +0000
+diff -Nur linux-2.6.16/drivers/net/imq.c linux-2.6.16-owrt/drivers/net/imq.c
+--- linux-2.6.16/drivers/net/imq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16-owrt/drivers/net/imq.c 2006-03-20 12:59:23.000000000 +0100
@@ -0,0 +1,403 @@
+/*
+ * Pseudo-driver for the intermediate queue device.
+MODULE_AUTHOR("http://www.linuximq.net");
+MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
+MODULE_LICENSE("GPL");
-diff -Nrub linux-2.6.14/include/linux/imq.h linux-2.6.14-imq/include/linux/imq.h
---- linux-2.6.14/include/linux/imq.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14-imq/include/linux/imq.h 2005-12-16 16:28:05.000000000 +0000
+diff -Nur linux-2.6.16/drivers/net/Kconfig linux-2.6.16-owrt/drivers/net/Kconfig
+--- linux-2.6.16/drivers/net/Kconfig 2006-03-20 06:53:29.000000000 +0100
++++ linux-2.6.16-owrt/drivers/net/Kconfig 2006-03-20 12:59:23.000000000 +0100
+@@ -93,6 +93,129 @@
+ To compile this driver as a module, choose M here: the module
+ will be called eql. If unsure, say N.
+
++config IMQ
++ tristate "IMQ (intermediate queueing device) support"
++ depends on NETDEVICES && NETFILTER
++ ---help---
++ The IMQ device(s) is used as placeholder for QoS queueing disciplines.
++ Every packet entering/leaving the IP stack can be directed through
++ the IMQ device where it's enqueued/dequeued to the attached qdisc.
++ This allows you to treat network devices as classes and distribute
++ bandwidth among them. Iptables is used to specify through which IMQ
++ device, if any, packets travel.
++
++ More information at: http://www.linuximq.net/
++
++ To compile this driver as a module, choose M here: the module
++ will be called imq. If unsure, say N.
++
++choice
++ prompt "IMQ behavior (PRE/POSTROUTING)"
++ depends on IMQ
++ default IMQ_BEHAVIOR_BA
++ help
++
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ IMQ can work in any of the following ways:
++
++ PREROUTING | POSTROUTING
++ -----------------|-------------------
++ #1 After NAT | After NAT
++ #2 After NAT | Before NAT
++ #3 Before NAT | After NAT
++ #4 Before NAT | Before NAT
++
++ The default behavior is to hook before NAT on PREROUTING
++ and after NAT on POSTROUTING (#3).
++
++ This settings are specially usefull when trying to use IMQ
++ to shape NATed clients.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++ bool "IMQ AA"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++ bool "IMQ AB"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++ bool "IMQ BA"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++ bool "IMQ BB"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++ int "Number of IMQ devices"
++ range 2 8
++ depends on IMQ
++ default "2"
++ help
++
++ This settings defines how many IMQ devices will be
++ created.
++
++ The default value is 2.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
+ config TUN
+ tristate "Universal TUN/TAP device driver support"
+ select CRC32
+diff -Nur linux-2.6.16/drivers/net/Makefile linux-2.6.16-owrt/drivers/net/Makefile
+--- linux-2.6.16/drivers/net/Makefile 2006-03-20 06:53:29.000000000 +0100
++++ linux-2.6.16-owrt/drivers/net/Makefile 2006-03-20 13:00:13.000000000 +0100
+@@ -125,6 +125,7 @@
+ endif
+
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_DE600) += de600.o
+ obj-$(CONFIG_DE620) += de620.o
+diff -Nur linux-2.6.16/include/linux/imq.h linux-2.6.16-owrt/include/linux/imq.h
+--- linux-2.6.16/include/linux/imq.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16-owrt/include/linux/imq.h 2006-03-20 12:59:23.000000000 +0100
@@ -0,0 +1,9 @@
+#ifndef _IMQ_H
+#define _IMQ_H
+#define IMQ_F_ENQUEUE 0x80
+
+#endif /* _IMQ_H */
-diff -Nrub linux-2.6.14/include/linux/netfilter_ipv4/ipt_IMQ.h linux-2.6.14-imq/include/linux/netfilter_ipv4/ipt_IMQ.h
---- linux-2.6.14/include/linux/netfilter_ipv4/ipt_IMQ.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14-imq/include/linux/netfilter_ipv4/ipt_IMQ.h 2005-12-16 16:28:05.000000000 +0000
+diff -Nur linux-2.6.16/include/linux/netfilter_ipv4/ipt_IMQ.h linux-2.6.16-owrt/include/linux/netfilter_ipv4/ipt_IMQ.h
+--- linux-2.6.16/include/linux/netfilter_ipv4/ipt_IMQ.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16-owrt/include/linux/netfilter_ipv4/ipt_IMQ.h 2006-03-20 12:59:23.000000000 +0100
@@ -0,0 +1,8 @@
+#ifndef _IPT_IMQ_H
+#define _IPT_IMQ_H
+};
+
+#endif /* _IPT_IMQ_H */
-diff -Nrub linux-2.6.14/include/linux/netfilter_ipv6/ip6t_IMQ.h linux-2.6.14-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h
---- linux-2.6.14/include/linux/netfilter_ipv6/ip6t_IMQ.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h 2005-12-16 16:28:05.000000000 +0000
+diff -Nur linux-2.6.16/include/linux/netfilter_ipv6/ip6t_IMQ.h linux-2.6.16-owrt/include/linux/netfilter_ipv6/ip6t_IMQ.h
+--- linux-2.6.16/include/linux/netfilter_ipv6/ip6t_IMQ.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16-owrt/include/linux/netfilter_ipv6/ip6t_IMQ.h 2006-03-20 12:59:23.000000000 +0100
@@ -0,0 +1,8 @@
+#ifndef _IP6T_IMQ_H
+#define _IP6T_IMQ_H
+};
+
+#endif /* _IP6T_IMQ_H */
-diff -Nrub linux-2.6.14/include/linux/skbuff.h linux-2.6.14-imq/include/linux/skbuff.h
---- linux-2.6.14/include/linux/skbuff.h 2005-10-28 00:02:08.000000000 +0000
-+++ linux-2.6.14-imq/include/linux/skbuff.h 2005-12-16 16:28:05.000000000 +0000
-@@ -271,6 +271,10 @@
- #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
- __u8 ipvs_property:1;
+diff -Nur linux-2.6.16/include/linux/skbuff.h linux-2.6.16-owrt/include/linux/skbuff.h
+--- linux-2.6.16/include/linux/skbuff.h 2006-03-20 06:53:29.000000000 +0100
++++ linux-2.6.16-owrt/include/linux/skbuff.h 2006-03-20 12:59:23.000000000 +0100
+@@ -275,6 +275,10 @@
+ #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+ struct sk_buff *nfct_reasm;
#endif
+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
+ unsigned char imq_flags;
#ifdef CONFIG_BRIDGE_NETFILTER
struct nf_bridge_info *nf_bridge;
#endif
-diff -Nrub linux-2.6.14/net/core/skbuff.c linux-2.6.14-imq/net/core/skbuff.c
---- linux-2.6.14/net/core/skbuff.c 2005-10-28 00:02:08.000000000 +0000
-+++ linux-2.6.14-imq/net/core/skbuff.c 2005-12-16 16:28:05.000000000 +0000
-@@ -413,6 +413,10 @@
- #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
- C(ipvs_property);
+diff -Nur linux-2.6.16/net/core/skbuff.c linux-2.6.16-owrt/net/core/skbuff.c
+--- linux-2.6.16/net/core/skbuff.c 2006-03-20 06:53:29.000000000 +0100
++++ linux-2.6.16-owrt/net/core/skbuff.c 2006-03-20 12:59:23.000000000 +0100
+@@ -425,6 +425,10 @@
+ C(nfct_reasm);
+ nf_conntrack_get_reasm(skb->nfct_reasm);
#endif
+#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
+ C(imq_flags);
#ifdef CONFIG_BRIDGE_NETFILTER
C(nf_bridge);
nf_bridge_get(skb->nf_bridge);
-@@ -473,6 +477,10 @@
+@@ -489,6 +493,10 @@
#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
new->ipvs_property = old->ipvs_property;
#endif
#ifdef CONFIG_BRIDGE_NETFILTER
new->nf_bridge = old->nf_bridge;
nf_bridge_get(old->nf_bridge);
-diff -Nrub linux-2.6.14/net/ipv4/netfilter/Kconfig linux-2.6.14-imq/net/ipv4/netfilter/Kconfig
---- linux-2.6.14/net/ipv4/netfilter/Kconfig 2005-10-28 00:02:08.000000000 +0000
-+++ linux-2.6.14-imq/net/ipv4/netfilter/Kconfig 2005-12-16 16:28:05.000000000 +0000
-@@ -489,6 +489,17 @@
-
- To compile it as a module, choose M here. If unsure, say N.
-
-+config IP_NF_TARGET_IMQ
-+ tristate "IMQ target support"
-+ depends on IP_NF_MANGLE
-+ help
-+ This option adds a `IMQ' target which is used to specify if and
-+ to which IMQ device packets should get enqueued/dequeued.
-+
-+ For more information visit: http://www.linuximq.net/
-+
-+ To compile it as a module, choose M here. If unsure, say N.
-+
- config IP_NF_TARGET_LOG
- tristate "LOG target support"
- depends on IP_NF_IPTABLES
-diff -Nrub linux-2.6.14/net/ipv4/netfilter/Makefile linux-2.6.14-imq/net/ipv4/netfilter/Makefile
---- linux-2.6.14/net/ipv4/netfilter/Makefile 2005-10-28 00:02:08.000000000 +0000
-+++ linux-2.6.14-imq/net/ipv4/netfilter/Makefile 2005-12-16 16:28:05.000000000 +0000
-@@ -80,6 +80,7 @@
- obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
- obj-$(CONFIG_IP_NF_TARGET_DSCP) += ipt_DSCP.o
- obj-$(CONFIG_IP_NF_TARGET_MARK) += ipt_MARK.o
-+obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
- obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
- obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
- obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
-diff -Nrub linux-2.6.14/net/ipv4/netfilter/ipt_IMQ.c linux-2.6.14-imq/net/ipv4/netfilter/ipt_IMQ.c
---- linux-2.6.14/net/ipv4/netfilter/ipt_IMQ.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14-imq/net/ipv4/netfilter/ipt_IMQ.c 2005-12-16 16:28:05.000000000 +0000
+diff -Nur linux-2.6.16/net/ipv4/netfilter/ipt_IMQ.c linux-2.6.16-owrt/net/ipv4/netfilter/ipt_IMQ.c
+--- linux-2.6.16/net/ipv4/netfilter/ipt_IMQ.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16-owrt/net/ipv4/netfilter/ipt_IMQ.c 2006-03-20 12:59:23.000000000 +0100
@@ -0,0 +1,80 @@
+/*
+ * This target marks packets to be enqueued to an imq device
+MODULE_AUTHOR("http://www.linuximq.net");
+MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
+MODULE_LICENSE("GPL");
-diff -Nrub linux-2.6.14/net/ipv6/netfilter/Kconfig linux-2.6.14-imq/net/ipv6/netfilter/Kconfig
---- linux-2.6.14/net/ipv6/netfilter/Kconfig 2005-10-28 00:02:08.000000000 +0000
-+++ linux-2.6.14-imq/net/ipv6/netfilter/Kconfig 2005-12-16 16:28:05.000000000 +0000
-@@ -190,6 +190,15 @@
+diff -Nur linux-2.6.16/net/ipv4/netfilter/Kconfig linux-2.6.16-owrt/net/ipv4/netfilter/Kconfig
+--- linux-2.6.16/net/ipv4/netfilter/Kconfig 2006-03-20 12:58:53.000000000 +0100
++++ linux-2.6.16-owrt/net/ipv4/netfilter/Kconfig 2006-03-20 12:59:23.000000000 +0100
+@@ -351,6 +351,17 @@
To compile it as a module, choose M here. If unsure, say N.
-+config IP6_NF_TARGET_IMQ
-+ tristate "IMQ target support"
-+ depends on IP6_NF_MANGLE
-+ help
-+ This option adds a `IMQ' target which is used to specify if and
-+ to which imq device packets should get enqueued/dequeued.
++config IP_NF_TARGET_IMQ
++ tristate "IMQ target support"
++ depends on IP_NF_MANGLE
++ help
++ This option adds a `IMQ' target which is used to specify if and
++ to which IMQ device packets should get enqueued/dequeued.
+
-+ To compile it as a module, choose M here. If unsure, say N.
++ For more information visit: http://www.linuximq.net/
+
- config IP6_NF_TARGET_LOG
++ To compile it as a module, choose M here. If unsure, say N.
++
+ config IP_NF_TARGET_LOG
tristate "LOG target support"
- depends on IP6_NF_FILTER
-diff -Nrub linux-2.6.14/net/ipv6/netfilter/Makefile linux-2.6.14-imq/net/ipv6/netfilter/Makefile
---- linux-2.6.14/net/ipv6/netfilter/Makefile 2005-10-28 00:02:08.000000000 +0000
-+++ linux-2.6.14-imq/net/ipv6/netfilter/Makefile 2005-12-16 16:28:05.000000000 +0000
-@@ -6,6 +6,7 @@
- obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
- obj-$(CONFIG_IP6_NF_MATCH_LIMIT) += ip6t_limit.o
- obj-$(CONFIG_IP6_NF_MATCH_MARK) += ip6t_mark.o
-+obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
- obj-$(CONFIG_IP6_NF_MATCH_LENGTH) += ip6t_length.o
- obj-$(CONFIG_IP6_NF_MATCH_MAC) += ip6t_mac.o
- obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o
-diff -Nrub linux-2.6.14/net/ipv6/netfilter/ip6t_IMQ.c linux-2.6.14-imq/net/ipv6/netfilter/ip6t_IMQ.c
---- linux-2.6.14/net/ipv6/netfilter/ip6t_IMQ.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14-imq/net/ipv6/netfilter/ip6t_IMQ.c 2005-12-16 16:28:05.000000000 +0000
+ depends on IP_NF_IPTABLES
+diff -Nur linux-2.6.16/net/ipv4/netfilter/Makefile linux-2.6.16-owrt/net/ipv4/netfilter/Makefile
+--- linux-2.6.16/net/ipv4/netfilter/Makefile 2006-03-20 12:58:53.000000000 +0100
++++ linux-2.6.16-owrt/net/ipv4/netfilter/Makefile 2006-03-20 13:01:12.000000000 +0100
+@@ -67,6 +67,7 @@
+ obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o
+ obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
+ obj-$(CONFIG_IP_NF_TARGET_DSCP) += ipt_DSCP.o
++obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
+ obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
+ obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
+ obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
+diff -Nur linux-2.6.16/net/ipv6/netfilter/ip6t_IMQ.c linux-2.6.16-owrt/net/ipv6/netfilter/ip6t_IMQ.c
+--- linux-2.6.16/net/ipv6/netfilter/ip6t_IMQ.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16-owrt/net/ipv6/netfilter/ip6t_IMQ.c 2006-03-20 12:59:23.000000000 +0100
@@ -0,0 +1,80 @@
+/*
+ * This target marks packets to be enqueued to an imq device
+MODULE_AUTHOR("http://www.linuximq.net");
+MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
+MODULE_LICENSE("GPL");
-diff -Nrub linux-2.6.14/net/sched/sch_generic.c linux-2.6.14-imq/net/sched/sch_generic.c
---- linux-2.6.14/net/sched/sch_generic.c 2005-10-28 00:02:08.000000000 +0000
-+++ linux-2.6.14-imq/net/sched/sch_generic.c 2005-12-16 16:28:05.000000000 +0000
+diff -Nur linux-2.6.16/net/ipv6/netfilter/Kconfig linux-2.6.16-owrt/net/ipv6/netfilter/Kconfig
+--- linux-2.6.16/net/ipv6/netfilter/Kconfig 2006-03-20 06:53:29.000000000 +0100
++++ linux-2.6.16-owrt/net/ipv6/netfilter/Kconfig 2006-03-20 12:59:23.000000000 +0100
+@@ -154,6 +154,15 @@
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config IP6_NF_TARGET_IMQ
++ tristate "IMQ target support"
++ depends on IP6_NF_MANGLE
++ help
++ This option adds a `IMQ' target which is used to specify if and
++ to which imq device packets should get enqueued/dequeued.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
+ config IP6_NF_TARGET_LOG
+ tristate "LOG target support"
+ depends on IP6_NF_FILTER
+diff -Nur linux-2.6.16/net/ipv6/netfilter/Makefile linux-2.6.16-owrt/net/ipv6/netfilter/Makefile
+--- linux-2.6.16/net/ipv6/netfilter/Makefile 2006-03-20 06:53:29.000000000 +0100
++++ linux-2.6.16-owrt/net/ipv6/netfilter/Makefile 2006-03-20 13:02:14.000000000 +0100
+@@ -4,6 +4,7 @@
+
+ # Link order matters here.
+ obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
++obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
+ obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o
+ obj-$(CONFIG_IP6_NF_MATCH_OPTS) += ip6t_hbh.o ip6t_dst.o
+ obj-$(CONFIG_IP6_NF_MATCH_IPV6HEADER) += ip6t_ipv6header.o
+diff -Nur linux-2.6.16/net/sched/sch_generic.c linux-2.6.16-owrt/net/sched/sch_generic.c
+--- linux-2.6.16/net/sched/sch_generic.c 2006-03-20 06:53:29.000000000 +0100
++++ linux-2.6.16-owrt/net/sched/sch_generic.c 2006-03-20 12:59:23.000000000 +0100
@@ -29,6 +29,9 @@
#include <linux/netdevice.h>
#include <linux/skbuff.h>
projects / openwrt.git / blobdiff