modules/admin-full: add AHCP client support
[project/luci.git] / modules / admin-full / luasrc / model / cbi / admin_network / ifaces.lua
index 823d42d..798b388 100644 (file)
@@ -14,11 +14,16 @@ $Id$
 ]]--
 
 local fs = require "nixio.fs"
+local ut = require "luci.util"
 local nw = require "luci.model.network"
 local fw = require "luci.model.firewall"
 
 arg[1] = arg[1] or ""
 
+local has_dnsmasq  = fs.access("/etc/config/dhcp")
+local has_firewall = fs.access("/etc/config/firewall")
+local has_radvd    = fs.access("/etc/config/radvd")
+
 local has_3g     = fs.access("/usr/bin/gcom")
 local has_pptp   = fs.access("/usr/sbin/pptp")
 local has_pppd   = fs.access("/usr/sbin/pppd")
@@ -26,14 +31,35 @@ local has_pppoe  = fs.glob("/usr/lib/pppd/*/rp-pppoe.so")()
 local has_pppoa  = fs.glob("/usr/lib/pppd/*/pppoatm.so")()
 local has_ipv6   = fs.access("/proc/net/ipv6_route")
 local has_6in4   = fs.access("/lib/network/6in4.sh")
+local has_6to4   = fs.access("/lib/network/6to4.sh")
+local has_relay  = fs.access("/lib/network/relay.sh")
+local has_ahcp   = fs.access("/lib/network/ahcp.sh")
 
 m = Map("network", translate("Interfaces") .. " - " .. arg[1]:upper(), translate("On this page you can configure the network interfaces. You can bridge several interfaces by ticking the \"bridge interfaces\" field and enter the names of several network interfaces separated by spaces. You can also use <abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation <samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: <samp>eth0.1</samp>)."))
-m:chain("firewall")
 m:chain("wireless")
 
+if has_firewall then
+       m:chain("firewall")
+end
+
+if has_radvd then
+       m:chain("radvd")
+end
+
 nw.init(m.uci)
 fw.init(m.uci)
 
+
+local net = nw:get_network(arg[1])
+
+-- redirect to overview page if network does not exist anymore (e.g. after a revert)
+if not net then
+       luci.http.redirect(luci.dispatcher.build_url("admin/network/network"))
+       return
+end
+
+local ifc = net:get_interfaces()[1]
+
 s = m:section(NamedSection, arg[1], "interface", translate("Common Configuration"))
 s.addremove = false
 
@@ -41,8 +67,15 @@ s:tab("general", translate("General Setup"))
 if has_ipv6  then s:tab("ipv6", translate("IPv6 Setup")) end
 if has_pppd  then s:tab("ppp", translate("PPP Settings")) end
 if has_pppoa then s:tab("atm", translate("ATM Settings")) end
+if has_6in4 or has_6to4 then s:tab("tunnel", translate("Tunnel Settings")) end
+if has_relay then s:tab("relay", translate("Relay Settings")) end
+if has_ahcp then s:tab("ahcp", translate("AHCP Settings")) end
 s:tab("physical", translate("Physical Settings"))
-s:tab("firewall", translate("Firewall Settings"))
+if has_firewall then s:tab("firewall", translate("Firewall Settings")) end
+
+st = s:taboption("general", DummyValue, "__status", translate("Status"))
+st.template = "admin_network/iface_status"
+st.network  = arg[1]
 
 --[[
 back = s:taboption("general", DummyValue, "_overview", translate("Overview"))
@@ -60,6 +93,10 @@ if has_pppoe then p:value("pppoe", "PPPoE")   end
 if has_pppoa then p:value("pppoa", "PPPoA")   end
 if has_3g    then p:value("3g",    "UMTS/3G") end
 if has_pptp  then p:value("pptp",  "PPTP")    end
+if has_6in4  then p:value("6in4",  "6in4")    end
+if has_6to4  then p:value("6to4",  "6to4")    end
+if has_relay then p:value("relay", "Relay")   end
+if has_ahcp  then p:value("ahcp",  "AHCP")    end
 p:value("none", translate("none"))
 
 if not ( has_pppd and has_pppoe and has_pppoa and has_3g and has_pptp ) then
@@ -69,10 +106,13 @@ end
 br = s:taboption("physical", Flag, "type", translate("Bridge interfaces"), translate("creates a bridge over specified interface(s)"))
 br.enabled = "bridge"
 br.rmempty = true
+br:depends("proto", "static")
+br:depends("proto", "dhcp")
+br:depends("proto", "none")
 
 stp = s:taboption("physical", Flag, "stp", translate("Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"),
        translate("Enables the Spanning Tree Protocol on this bridge"))
-stp:depends("type", "1")
+stp:depends("type", "bridge")
 stp.rmempty = true
 
 ifname_single = s:taboption("physical", Value, "ifname_single", translate("Interface"))
@@ -81,7 +121,12 @@ ifname_single.widget = "radio"
 ifname_single.nobridges = true
 ifname_single.network = arg[1]
 ifname_single.rmempty = true
-ifname_single:depends("type", "")
+ifname_single:depends({ type = "", proto = "static" })
+ifname_single:depends({ type = "", proto = "dhcp"   })
+ifname_single:depends({ type = "", proto = "pppoe"  })
+ifname_single:depends({ type = "", proto = "pppoa"  })
+ifname_single:depends({ type = "", proto = "ahcp"   })
+ifname_single:depends({ type = "", proto = "none"   })
 
 function ifname_single.cfgvalue(self, s)
        return self.map.uci:get("network", s, "ifname")
@@ -94,105 +139,196 @@ function ifname_single.write(self, s, val)
                for _, i in ipairs(n:get_interfaces()) do
                        n:del_interface(i)
                end
-               n:add_interface(val)
+
+               for i in ut.imatch(val) do
+                       n:add_interface(i)
+
+                       -- if this is not a bridge, only assign first interface
+                       if self.option == "ifname_single" then
+                               break
+                       end
+               end
        end
 end
 
-
-ifname_multi = s:taboption("physical", MultiValue, "ifname_multi", translate("Interface"))
+ifname_multi = s:taboption("physical", Value, "ifname_multi", translate("Interface"))
 ifname_multi.template = "cbi/network_ifacelist"
 ifname_multi.nobridges = true
 ifname_multi.network = arg[1]
 ifname_multi.widget = "checkbox"
-ifname_multi:depends("type", "1")
+ifname_multi:depends("type", "bridge")
 ifname_multi.cfgvalue = ifname_single.cfgvalue
 ifname_multi.write = ifname_single.write
 
 
-for _, d in ipairs(nw:get_interfaces()) do
-       if not d:is_bridge() then
-               ifname_single:value(d:name())
-               ifname_multi:value(d:name())
-       end
-end
-
+if has_firewall then
+       fwzone = s:taboption("firewall", Value, "_fwzone",
+               translate("Create / Assign firewall-zone"),
+               translate("Choose the firewall zone you want to assign to this interface. Select <em>unspecified</em> to remove the interface from the associated zone or fill out the <em>create</em> field to define a new zone and attach the interface to it."))
 
-local fwd_to, fwd_from
+       fwzone.template = "cbi/firewall_zonelist"
+       fwzone.network = arg[1]
+       fwzone.rmempty = false
 
-fwzone = s:taboption("firewall", Value, "_fwzone",
-       translate("Create / Assign firewall-zone"),
-       translate("Choose the firewall zone you want to assign to this interface. Select <em>unspecified</em> to remove the interface from the associated zone or fill out the <em>create</em> field to define a new zone and attach the interface to it."))
-
-fwzone.template = "cbi/firewall_zonelist"
-fwzone.network = arg[1]
-fwzone.rmempty = false
+       function fwzone.cfgvalue(self, section)
+               self.iface = section
+               local z = fw:get_zone_by_network(section)
+               return z and z:name()
+       end
 
-function fwzone.cfgvalue(self, section)
-       self.iface = section
-       local z = fw:get_zone_by_network(section)
-       return z and z:name()
-end
+       function fwzone.write(self, section, value)
+               local zone = fw:get_zone(value)
 
-function fwzone.write(self, section, value)
-       local zone = fw:get_zone(value)
+               if not zone and value == '-' then
+                       value = m:formvalue(self:cbid(section) .. ".newzone")
+                       if value and #value > 0 then
+                               zone = fw:add_zone(value)
+                       else
+                               fw:del_network(section)
+                       end
+               end
 
-       if not zone and value == '-' then
-               value = m:formvalue(self:cbid(section) .. ".newzone")
-               if value and #value > 0 then
-                       zone = fw:add_zone(value)
-               else
+               if zone then
                        fw:del_network(section)
+                       zone:add_network(section)
                end
        end
-
-       if zone then
-               fw:del_network(section)
-               zone:add_network(section)
-       end
 end
 
-
 ipaddr = s:taboption("general", Value, "ipaddr", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"))
-ipaddr.rmempty = true
+ipaddr.optional = true
+ipaddr.datatype = "ip4addr"
 ipaddr:depends("proto", "static")
 
 nm = s:taboption("general", Value, "netmask", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"))
-nm.rmempty = true
+nm.optional = true
+nm.datatype = "ip4addr"
 nm:depends("proto", "static")
 nm:value("255.255.255.0")
 nm:value("255.255.0.0")
 nm:value("255.0.0.0")
 
 gw = s:taboption("general", Value, "gateway", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"))
+gw.optional = true
+gw.datatype = "ip4addr"
 gw:depends("proto", "static")
-gw.rmempty = true
 
-bcast = s:taboption("general", Value, "bcast", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"))
+bcast = s:taboption("general", Value, "broadcast", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"))
+bcast.optional = true
+bcast.datatype = "ip4addr"
 bcast:depends("proto", "static")
 
 if has_ipv6 then
        ip6addr = s:taboption("ipv6", Value, "ip6addr", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"), translate("<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"))
+       ip6addr.optional = true
+       ip6addr.datatype = "ip6addr"
        ip6addr:depends("proto", "static")
+       ip6addr:depends("proto", "6in4")
 
        ip6gw = s:taboption("ipv6", Value, "ip6gw", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"))
+       ip6gw.optional = true
+       ip6gw.datatype = "ip6addr"
        ip6gw:depends("proto", "static")
+
+
+       ra = s:taboption("ipv6", Flag, "accept_ra", translate("Accept Router Advertisements"))
+       ra.default = m.uci:get("network", arg[1], "proto") == "dhcp" and ra.enabled or ra.disabled
+       ra:depends("proto", "static")
+       ra:depends("proto", "dhcp")
+       ra:depends("proto", "none")
+
+       rs = s:taboption("ipv6", Flag, "send_rs", translate("Send Router Solicitiations"))
+       rs.default = m.uci:get("network", arg[1], "proto") ~= "dhcp" and rs.enabled or rs.disabled
+       rs:depends("proto", "static")
+       rs:depends("proto", "dhcp")
+       rs:depends("proto", "none")
 end
 
-dns = s:taboption("general", Value, "dns", translate("<abbr title=\"Domain Name System\">DNS</abbr>-Server"),
-       translate("You can specify multiple DNS servers separated by space here. Servers entered here will override " ..
+dns = s:taboption("general", DynamicList, "dns", translate("<abbr title=\"Domain Name System\">DNS</abbr>-Server"),
+       translate("You can specify multiple DNS servers here, press enter to add a new entry. Servers entered here will override " ..
                "automatically assigned ones."))
 
-dns:depends("peerdns", "")
+dns.optional = true
+dns.cast = "string"
+dns.datatype = "ipaddr"
+dns:depends({ peerdns = "", proto = "static" })
+dns:depends({ peerdns = "", proto = "dhcp"   })
+dns:depends({ peerdns = "", proto = "pppoe"  })
+dns:depends({ peerdns = "", proto = "pppoa"  })
+dns:depends({ peerdns = "", proto = "none"   })
 
 mtu = s:taboption("physical", Value, "mtu", "MTU")
-mtu.isinteger = true
-
-mac = s:taboption("physical", Value, "macaddr", translate("<abbr title=\"Media Access Control\">MAC</abbr>-Address"))
-
+mtu.optional = true
+mtu.datatype = "uinteger"
+mtu.placeholder = 1500
+mtu:depends("proto", "static")
+mtu:depends("proto", "dhcp")
+mtu:depends("proto", "pppoe")
+mtu:depends("proto", "pppoa")
+mtu:depends("proto", "6in4")
+mtu:depends("proto", "6to4")
+mtu:depends("proto", "none")
 
 srv = s:taboption("general", Value, "server", translate("<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"))
 srv:depends("proto", "pptp")
-srv.rmempty = true
+srv.optional = false
+srv.datatype = "host"
+
+if has_6in4 then
+       peer = s:taboption("general", Value, "peeraddr", translate("Server IPv4-Address"))
+       peer.optional = false
+       peer.datatype = "ip4addr"
+       peer:depends("proto", "6in4")
+end
+
+if has_6in4 or has_6to4 then
+       ttl = s:taboption("physical", Value, "ttl", translate("TTL"))
+       ttl.default = "64"
+       ttl.optional = true
+       ttl.datatype = "uinteger"
+       ttl:depends("proto", "6in4")
+       ttl:depends("proto", "6to4")
+end
+
+if has_6to4 then
+       advi = s:taboption("general", Value, "adv_interface", translate("Advertise IPv6 on network"))
+       advi.widget = "checkbox"
+       advi.exclude = arg[1]
+       advi.default = "lan"
+       advi.template = "cbi/network_netlist"
+       advi.nocreate = true
+       advi.nobridges = true
+       advi:depends("proto", "6to4")
+
+       advn = s:taboption("general", Value, "adv_subnet", translate("Advertised network ID"), translate("Allowed range is 1 to FFFF"))
+       advn.default = "1"
+       advn:depends("proto", "6to4")
+
+       function advn.write(self, section, value)
+               value = tonumber(value, 16) or 1
+
+               if value > 65535 then value = 65535
+               elseif value < 1 then value = 1 end
+
+               Value.write(self, section, "%X" % value)
+       end
+end
+
+if has_relay then
+       rnet = s:taboption("general", Value, "network", translate("Relay between networks"))
+       rnet.widget = "checkbox"
+       rnet.exclude = arg[1]
+       rnet.template = "cbi/network_netlist"
+       rnet.nocreate = true
+       rnet.nobridges = true
+       rnet:depends("proto", "relay")
+end
+
+mac = s:taboption("physical", Value, "macaddr", translate("<abbr title=\"Media Access Control\">MAC</abbr>-Address"))
+mac:depends("proto", "none")
+mac:depends("proto", "static")
+mac:depends("proto", "dhcp")
+mac.placeholder = ifc and ifc:mac():upper()
 
 if has_3g then
        service = s:taboption("general", ListValue, "service", translate("Service type"))
@@ -213,7 +349,14 @@ if has_3g then
        pincode:depends("proto", "3g")
 end
 
-if has_pppd or has_pppoe or has_pppoa or has_3g or has_pptp then
+if has_6in4 then
+       tunid = s:taboption("general", Value, "tunnelid", translate("HE.net Tunnel ID"))
+       tunid.optional = true
+       tunid.datatype = "uinteger"
+       tunid:depends("proto", "6in4")
+end
+
+if has_pppd or has_pppoe or has_pppoa or has_3g or has_pptp or has_6in4 then
        user = s:taboption("general", Value, "username", translate("Username"))
        user.rmempty = true
        user:depends("proto", "pptp")
@@ -221,6 +364,7 @@ if has_pppd or has_pppoe or has_pppoa or has_3g or has_pptp then
        user:depends("proto", "pppoa")
        user:depends("proto", "ppp")
        user:depends("proto", "3g")
+       user:depends("proto", "6in4")
 
        pass = s:taboption("general", Value, "password", translate("Password"))
        pass.rmempty = true
@@ -230,7 +374,10 @@ if has_pppd or has_pppoe or has_pppoa or has_3g or has_pptp then
        pass:depends("proto", "pppoa")
        pass:depends("proto", "ppp")
        pass:depends("proto", "3g")
+       pass:depends("proto", "6in4")
+end
 
+if has_pppd or has_pppoe or has_pppoa or has_3g or has_pptp then
        ka = s:taboption("ppp", Value, "keepalive",
         translate("Keep-Alive"),
         translate("Number of failed connection tests to initiate automatic reconnect")
@@ -245,6 +392,8 @@ if has_pppd or has_pppoe or has_pppoa or has_3g or has_pptp then
         translate("Automatic Disconnect"),
         translate("Time (in seconds) after which an unused connection will be closed")
        )
+       demand.optional = true
+       demand.datatype = "uinteger"
        demand:depends("proto", "pptp")
        demand:depends("proto", "pppoe")
        demand:depends("proto", "pppoa")
@@ -261,14 +410,17 @@ if has_pppoa then
        atmdev = s:taboption("atm", Value, "atmdev", translate("ATM device number"))
        atmdev:depends("proto", "pppoa")
        atmdev.default = "0"
+       atmdev.datatype = "uinteger"
 
        vci = s:taboption("atm", Value, "vci", translate("ATM Virtual Channel Identifier (VCI)"))
        vci:depends("proto", "pppoa")
        vci.default = "35"
+       vci.datatype = "uinteger"
 
        vpi = s:taboption("atm", Value, "vpi", translate("ATM Virtual Path Identifier (VPI)"))
        vpi:depends("proto", "pppoa")
        vpi.default = "8"
+       vpi.datatype = "uinteger"
 end
 
 if has_pptp or has_pppd or has_pppoe or has_pppoa or has_3g then
@@ -288,10 +440,7 @@ if has_pptp or has_pppd or has_pppoe or has_pppoa or has_3g then
        defaultroute:depends("proto", "pppoe")
        defaultroute:depends("proto", "pptp")
        defaultroute:depends("proto", "3g")
-       defaultroute.rmempty = false
-       function defaultroute.cfgvalue(...)
-               return ( AbstractValue.cfgvalue(...) or '1' )
-       end
+       defaultroute.default = defaultroute.enabled
 
        peerdns = s:taboption("ppp", Flag, "peerdns",
         translate("Use peer DNS"),
@@ -302,10 +451,7 @@ if has_pptp or has_pppd or has_pppoe or has_pppoa or has_3g then
        peerdns:depends("proto", "pppoe")
        peerdns:depends("proto", "pptp")
        peerdns:depends("proto", "3g")
-       peerdns.rmempty = false
-       function peerdns.cfgvalue(...)
-               return ( AbstractValue.cfgvalue(...) or '1' )
-       end
+       peerdns.default = peerdns.enabled
 
        if has_ipv6 then
                ipv6 = s:taboption("ppp", Flag, "ipv6", translate("Enable IPv6 on PPP link") )
@@ -351,116 +497,247 @@ if has_pptp or has_pppd or has_pppoe or has_pppoa or has_3g then
         translate("Seconds to wait for the modem to become ready before attempting to connect")
        )
        maxwait:depends("proto", "3g")
+       maxwait.default  = "0"
+       maxwait.optional = true
+       maxwait.datatype = "uinteger"
 end
 
-s2 = m:section(TypedSection, "alias", translate("IP-Aliases"))
-s2.addremove = true
-
-s2:depends("interface", arg[1])
-s2.defaults.interface = arg[1]
+if has_relay then
+       fb = s:taboption("relay", Flag, "forward_bcast", translate("Forward broadcasts"))
+       fb.default = fb.enabled
+       fb:depends("proto", "relay")
+
+       fd = s:taboption("relay", Flag, "forward_dhcp", translate("Forward DHCP"))
+       fd.default = fd.enabled
+       fd:depends("proto", "relay")
+
+       gw = s:taboption("relay", Value, "relay_gateway", translate("Override Gateway"))
+       gw.optional    = true
+       gw.placeholder = "0.0.0.0"
+       gw.datatype    = "ip4addr"
+       gw:depends("proto", "relay")
+       function gw.cfgvalue(self, section)
+               return m.uci:get("network", section, "gateway")
+       end
+       function gw.write(self, section, value)
+               return m.uci:set("network", section, "gateway", value)
+       end
+       function gw.delete(self, section)
+               return m.uci:delete("network", section, "gateway")
+       end
 
-s2:tab("general", translate("General Setup"))
-s2.defaults.proto = "static"
+       expiry = s:taboption("relay", Value, "expiry", translate("Host expiry timeout"))
+       expiry.optional    = true
+       expiry.placeholder = 30
+       expiry.datatype    = "uinteger"
+       expiry:depends("proto", "relay")
+
+       retry = s:taboption("relay", Value, "retry", translate("ARP ping retries"))
+       retry.optional     = true
+       retry.placeholder  = 5
+       retry.datatype     = "uinteger"
+       retry:depends("proto", "relay")
+
+       table = s:taboption("relay", Value, "table", translate("Routing table ID"))
+       table.optional     = true
+       table.placeholder  = 16800
+       table.datatype     = "uinteger"
+       table:depends("proto", "relay")
+end
 
-s2:taboption("general", Value, "ipaddr", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address")).rmempty = true
+if has_ahcp then
+       mca = s:taboption("ahcp", Value, "multicast_address", translate("Multicast address"))
+       mca.optional    = true
+       mca.placeholder = "ff02::cca6:c0f9:e182:5359"
+       mca.datatype    = "ip6addr"
+       mca:depends("proto", "ahcp")
+
+       port = s:taboption("ahcp", Value, "port", translate("Port"))
+       port.optional    = true
+       port.placeholder = 5359
+       port.datatype    = "port"
+       port:depends("proto", "ahcp")
+
+       fam = s:taboption("ahcp", ListValue, "_family", translate("Protocol family"))
+       fam:value("", translate("IPv4 and IPv6"))
+       fam:value("ipv4", translate("IPv4 only"))
+       fam:value("ipv6", translate("IPv6 only"))
+       fam:depends("proto", "ahcp")
+
+       function fam.cfgvalue(self, section)
+               local v4 = m.uci:get_bool("network", section, "ipv4_only")
+               local v6 = m.uci:get_bool("network", section, "ipv6_only")
+               if v4 then
+                       return "ipv4"
+               elseif v6 then
+                       return "ipv6"
+               end
+               return ""
+       end
 
-nm = s2:taboption("general", Value, "netmask", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"))
-nm.rmempty = true
-nm:value("255.255.255.0")
-nm:value("255.255.0.0")
-nm:value("255.0.0.0")
+       function fam.write(self, section, value)
+               if value == "ipv4" then
+                       m.uci:set("network", section, "ipv4_only", "true")
+                       m.uci:delete("network", section, "ipv6_only")
+               elseif value == "ipv6" then
+                       m.uci:set("network", section, "ipv6_only", "true")
+                       m.uci:delete("network", section, "ipv4_only")
+               end
+       end
 
-s2:taboption("general", Value, "gateway", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway")).rmempty = true
+       function fam.remove(self, section)
+               m.uci:delete("network", section, "ipv4_only")
+               m.uci:delete("network", section, "ipv6_only")
+       end
 
-if has_ipv6 then
-       s2:tab("ipv6", translate("IPv6 Setup"))
-       s2:taboption("ipv6", Value, "ip6addr", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"), translate("<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"))
-       s2:taboption("ipv6", Value, "ip6gw", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"))
+       nodns = s:taboption("ahcp", Flag, "no_dns", translate("Disable DNS setup"))
+       nodns.optional = true
+       nodns.enabled  = "true"
+       nodns.disabled = "false"
+       nodns.default  = nodns.disabled
+       nodns:depends("proto", "ahcp")
+
+       ltime = s:taboption("ahcp", Value, "lease_time", translate("Lease validity time"))
+       ltime.optional    = true
+       ltime.placeholder = 3666
+       ltime.datatype    = "uinteger"
+       ltime:depends("proto", "ahcp")
 end
 
-s2:tab("advanced", translate("Advanced Settings"))
-s2:taboption("advanced", Value, "bcast", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"))
-s2:taboption("advanced", Value, "dns", translate("<abbr title=\"Domain Name System\">DNS</abbr>-Server"))
+if net:proto() ~= "relay" then
+       s2 = m:section(TypedSection, "alias", translate("IP-Aliases"))
+       s2.addremove = true
 
+       s2:depends("interface", arg[1])
+       s2.defaults.interface = arg[1]
 
-m2 = Map("dhcp", "", "")
-function m2.on_parse()
-       local has_section = false
+       s2:tab("general", translate("General Setup"))
+       s2.defaults.proto = "static"
 
-       m2.uci:foreach("dhcp", "dhcp", function(s)
-               if s.interface == arg[1] then
-                       has_section = true
-                       return false
-               end
-       end)
+       ip = s2:taboption("general", Value, "ipaddr", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"))
+       ip.optional = true
+       ip.datatype = "ip4addr"
 
-       if not has_section then
-               m2.uci:section("dhcp", "dhcp", nil, { interface = arg[1], ignore = "1" })
-               m2.uci:save("dhcp")
-       end
-end
+       nm = s2:taboption("general", Value, "netmask", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"))
+       nm.optional = true
+       nm.datatype = "ip4addr"
+       nm:value("255.255.255.0")
+       nm:value("255.255.0.0")
+       nm:value("255.0.0.0")
 
-s = m2:section(TypedSection, "dhcp", translate("DHCP Server"))
-s.addremove = false
-s.anonymous = true
-s:tab("general",  translate("General Setup"))
-s:tab("advanced", translate("Advanced Settings"))
+       gw = s2:taboption("general", Value, "gateway", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"))
+       gw.optional = true
+       gw.datatype = "ip4addr"
 
-function s.filter(self, section)
-       return m2.uci:get("dhcp", section, "interface") == arg[1]
-end
+       if has_ipv6 then
+               s2:tab("ipv6", translate("IPv6 Setup"))
 
-local ignore = s:taboption("general", Flag, "ignore",
-       translate("Ignore interface"),
-       translate("Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for " ..
-               "this interface."))
+               ip6 = s2:taboption("ipv6", Value, "ip6addr", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"), translate("<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"))
+               ip6.optional = true
+               ip6.datatype = "ip6addr"
 
-ignore.rmempty = false
+               gw6 = s2:taboption("ipv6", Value, "ip6gw", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"))
+               gw6.optional = true
+               gw6.datatype = "ip6addr"
+       end
 
-local start = s:taboption("general", Value, "start", translate("Start"),
-       translate("Lowest leased address as offset from the network address."))
-start.rmempty = true
-start.default = "100"
+       s2:tab("advanced", translate("Advanced Settings"))
 
-local limit = s:taboption("general", Value, "limit", translate("Limit"),
-       translate("Maximum number of leased addresses."))
-limit.rmempty = true
-limit.default = "150"
+       bcast = s2:taboption("advanced", Value, "bcast", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"))
+       bcast.optional = true
+       bcast.datatype = "ip4addr"
 
-local ltime = s:taboption("general", Value, "leasetime", translate("Leasetime"),
-       translate("Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."))
-ltime.rmempty = true
-ltime.default = "12h"
+       dns = s2:taboption("advanced", Value, "dns", translate("<abbr title=\"Domain Name System\">DNS</abbr>-Server"))
+       dns.optional = true
+       dns.datatype = "ip4addr"
+end
 
-local dd = s:taboption("advanced", Flag, "dynamicdhcp",
-       translate("Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"),
-       translate("Dynamically allocate DHCP addresses for clients. If disabled, only " ..
-               "clients having static leases will be served."))
 
-dd.rmempty = false
-function dd.cfgvalue(self, section)
-       return Flag.cfgvalue(self, section) or "1"
-end
+--
+-- Display DNS settings if dnsmasq is available
+--
 
-s:taboption("advanced", Flag, "force", translate("Force"),
-       translate("Force DHCP on this network even if another server is detected."))
+if has_dnsmasq and net:proto() == "static" then
+       m2 = Map("dhcp", "", "")
+       function m2.on_parse()
+               local has_section = false
 
--- XXX: is this actually useful?
---s:taboption("advanced", Value, "name", translate("Name"),
---     translate("Define a name for this network."))
+               m2.uci:foreach("dhcp", "dhcp", function(s)
+                       if s.interface == arg[1] then
+                               has_section = true
+                               return false
+                       end
+               end)
 
-s:taboption("advanced", Value, "netmask",
-       translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"),
-       translate("Override the netmask sent to clients. Normally it is calculated " ..
-               "from the subnet that is served."))
+               if not has_section then
+                       m2.uci:section("dhcp", "dhcp", nil, { interface = arg[1], ignore = "1" })
+                       m2.uci:save("dhcp")
+               end
+       end
 
-s:taboption("advanced", DynamicList, "dhcp_option", translate("DHCP-Options"),
-       translate("Define additional DHCP options, for example \"<code>6,192.168.2.1," ..
-               "192.168.2.2</code>\" which advertises different DNS servers to clients."))
+       s = m2:section(TypedSection, "dhcp", translate("DHCP Server"))
+       s.addremove = false
+       s.anonymous = true
+       s:tab("general",  translate("General Setup"))
+       s:tab("advanced", translate("Advanced Settings"))
 
-for i, n in ipairs(s.children) do
-       if n ~= ignore then
-               n:depends("ignore", "")
+       function s.filter(self, section)
+               return m2.uci:get("dhcp", section, "interface") == arg[1]
+       end
+
+       local ignore = s:taboption("general", Flag, "ignore",
+               translate("Ignore interface"),
+               translate("Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for " ..
+                       "this interface."))
+
+       ignore.rmempty = false
+
+       local start = s:taboption("general", Value, "start", translate("Start"),
+               translate("Lowest leased address as offset from the network address."))
+       start.optional = true
+       start.datatype = "uinteger"
+       start.default = "100"
+
+       local limit = s:taboption("general", Value, "limit", translate("Limit"),
+               translate("Maximum number of leased addresses."))
+       limit.optional = true
+       limit.datatype = "uinteger"
+       limit.default = "150"
+
+       local ltime = s:taboption("general", Value, "leasetime", translate("Leasetime"),
+               translate("Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."))
+       ltime.rmempty = true
+       ltime.default = "12h"
+
+       local dd = s:taboption("advanced", Flag, "dynamicdhcp",
+               translate("Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"),
+               translate("Dynamically allocate DHCP addresses for clients. If disabled, only " ..
+                       "clients having static leases will be served."))
+       dd.default = dd.enabled
+
+       s:taboption("advanced", Flag, "force", translate("Force"),
+               translate("Force DHCP on this network even if another server is detected."))
+
+       -- XXX: is this actually useful?
+       --s:taboption("advanced", Value, "name", translate("Name"),
+       --      translate("Define a name for this network."))
+
+       mask = s:taboption("advanced", Value, "netmask",
+               translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"),
+               translate("Override the netmask sent to clients. Normally it is calculated " ..
+                       "from the subnet that is served."))
+
+       mask.optional = true
+       mask.datatype = "ip4addr"
+
+       s:taboption("advanced", DynamicList, "dhcp_option", translate("DHCP-Options"),
+               translate("Define additional DHCP options, for example \"<code>6,192.168.2.1," ..
+                       "192.168.2.2</code>\" which advertises different DNS servers to clients."))
+
+       for i, n in ipairs(s.children) do
+               if n ~= ignore then
+                       n:depends("ignore", "")
+               end
        end
 end