+++ /dev/null
--- wizard rewrite wip
-
-local uci = require "luci.model.uci".cursor()
-local sys = require "luci.sys"
-local util = require "luci.util"
-local ip = require "luci.ip"
-
-local community = "profile_" .. (uci:get("freifunk", "community", "name") or "Freifunk")
-local mesh_network = ip.IPv4(uci:get_first(community, "community", "mesh_network") or "10.0.0.0/8")
-local community_ipv6 = uci:get_first(community, "community", "ipv6") or 0
-local community_ipv6mode = uci:get_first(community, "community", "ipv6_config") or "static"
-local meshkit_ipv6 = uci:get("meshwizard", "ipv6", "enabled") or 0
-local community_vap = uci:get_first(community, "community", "vap") or 0
-
-m = Map("meshwizard", translate("Wizard"), translate("This wizard will assist you in setting up your router for Freifunk " ..
- "or another similar wireless community network."))
-
-n = m:section(NamedSection, "netconfig", nil, translate("Interfaces"))
-n.anonymous = true
-
--- common functions
-
-function cbi_configure(device)
- local configure = n:taboption(device, Flag, device .. "_config", translate("Configure this interface"),
- translate("Note: this will set up this interface for mesh operation, i.e. add it to zone 'freifunk' and enable olsr."))
-end
-
-function cbi_ip4addr(device)
- local ip4addr = n:taboption(device, Value, device .. "_ip4addr", translate("Mesh IP address"),
- translate("This is a unique address in the mesh (e.g. 10.1.1.1) and has to be registered at your local community."))
- ip4addr:depends(device .. "_config", 1)
- ip4addr.datatype = "ip4addr"
- function ip4addr.validate(self, value)
- local x = ip.IPv4(value)
- if mesh_network:contains(x) then
- return value
- else
- return nil, translate("The given IP address is not inside the mesh network range ") ..
- "(" .. mesh_network:string() .. ")."
- end
- end
-end
-
-function cbi_ip6addr(device)
- local ip6addr = n:taboption(device, Value, device .. "_ip6addr", translate("Mesh IPv6 address"),
- translate("This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and has to be registered at your local community."))
- ip6addr:depends(device .. "_config", 1)
- ip6addr.datatype = "ip6addr"
-end
-
-
-function cbi_dhcp(device)
- local dhcp = n:taboption(device, Flag, device .. "_dhcp", translate("Enable DHCP"),
- translate("DHCP will automatically assign ip addresses to clients"))
- dhcp:depends(device .. "_config", 1)
- dhcp.rmempty = true
-end
-
-function cbi_ra(device)
- local ra = n:taboption(device, Flag, device .. "_ipv6ra", translate("Enable RA"),
- translate("Send router advertisements on this device."))
- ra:depends(device .. "_config", 1)
- ra.rmempty = true
-end
-
-function cbi_dhcprange(device)
- local dhcprange = n:taboption(device, Value, device .. "_dhcprange", translate("DHCP IP range"),
- translate("The IP range from which clients are assigned ip addresses (e.g. 10.1.2.1/28). " ..
- "If this is a range inside your mesh network range, then it will be announced as HNA. Any other range will use NAT. " ..
- "If left empty then the defaults from the community profile will be used."))
- dhcprange:depends(device .. "_dhcp", "1")
- dhcprange.rmempty = true
- dhcprange.datatype = "ip4addr"
-end
--- create tabs and config for wireless
-local nets={}
-uci:foreach("wireless", "wifi-device", function(section)
- local device = section[".name"]
- table.insert(nets, device)
-end)
-
-local wired_nets = {}
-uci:foreach("network", "interface", function(section)
- local device = section[".name"]
- if not util.contains(nets, device) and device ~= "loopback" and not device:find("wireless") then
- table.insert(nets, device)
- table.insert(wired_nets, device)
- end
-end)
-
-for _, net in util.spairs(nets, function(a,b) return (nets[a] < nets[b]) end) do
- n:tab(net, net)
-end
-
--- create cbi config for wireless
-uci:foreach("wireless", "wifi-device", function(section)
- local device = section[".name"]
- local hwtype = section.type
- local syscc = section.country or uci:get(community, "wifi_device", "country") or
- uci:get("freifunk", "wifi_device", "country")
-
- cbi_configure(device)
-
- -- Channel selection
-
- if hwtype == "atheros" then
- local cc = util.trim(sys.exec("grep -i '" .. syscc .. "' /lib/wifi/cc_translate.txt |cut -d ' ' -f 2")) or 0
- sys.exec('"echo " .. cc .. " > /proc/sys/dev/" .. device .. "/countrycode"')
- elseif hwtype == "mac80211" then
- sys.exec("iw reg set " .. syscc)
- elseif hwtype == "broadcom" then
- sys.exec ("wlc country " .. syscc)
- end
-
- local chan = n:taboption(device, ListValue, device .. "_channel", translate("Channel"),
- translate("Your device and neighbouring nodes have to use the same channel."))
- chan:depends(device .. "_config", 1)
- chan:value('default')
-
- local iwinfo = sys.wifi.getiwinfo(device)
- if iwinfo and iwinfo.freqlist then
- for _, f in ipairs(iwinfo.freqlist) do
- if not f.restricted then
- chan:value(f.channel)
- end
- end
- end
- -- IPv4 address
- cbi_ip4addr(device)
-
- -- DHCP enable
- cbi_dhcp(device)
-
- -- DHCP range
- cbi_dhcprange(device)
-
- -- IPv6 addr and RA
- if community_ipv6 == "1" then
- if community_ipv6mode == "static" then
- cbi_ip6addr(device)
- end
- cbi_ra(device)
- end
-
- -- Enable VAP
- local supports_vap = 0
- if sys.call("/usr/bin/meshwizard/helpers/supports_vap.sh " .. device .. " " .. hwtype) == 0 then
- supports_vap = 1
- end
- if supports_vap == 1 then
- local vap = n:taboption(device, Flag, device .. "_vap", translate("Virtual Access Point (VAP)"),
- translate("This will setup a new virtual wireless interface in Access Point mode."))
- vap:depends(device .. "_dhcp", "1")
- vap.rmempty = true
- if community_vap == "1" then
- vap.default = "1"
- end
- end
-end)
-
-for _, device in pairs(wired_nets) do
- cbi_configure(device)
- cbi_ip4addr(device)
- cbi_dhcp(device)
- cbi_dhcprange(device)
- -- IPv6 addr and RA
- if community_ipv6 == "1" then
- if community_ipv6mode == "static" then
- cbi_ip6addr(device)
- end
- cbi_ra(device)
- end
-end
-
--- General settings
-g = m:section(TypedSection, "general", translate("General Settings"))
-g.anonymous = true
-
-local cleanup = g:option(Flag, "cleanup", translate("Cleanup config"),
- translate("If this is selected then config is cleaned before setting new config options."))
-cleanup.default = "1"
-
-local restrict = g:option(Flag, "local_restrict", translate("Protect LAN"),
- translate("Check this to protect your LAN from other nodes or clients") .. " (" .. translate("recommended") .. ").")
-
-local share = g:option(Flag, "sharenet", translate("Share your internet connection"),
- translate("Select this to allow others to use your connection to access the internet."))
- share.rmempty = true
-
--- IPv6 config
-if community_ipv6 == "1" then
- v6 = m:section(NamedSection, "ipv6", nil, translate("IPv6 Settings"))
- local enabled = v6:option(Flag, "enabled", translate("Enabled"),
- translate("Activate or deactivate IPv6 config globally."))
- enabled.default = meshkit_ipv6
- enabled.rmempty = false
-end
-
-return m
projects / project / luci.git / blobdiff