mainmenu "OpenWrt Configuration"
+config MODULES
+ bool
+ default y
+
config HAVE_DOT_CONFIG
bool
default y
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
default TARGET_INITRAMFS_COMPRESSION_NONE
- depends TARGET_ROOTFS_INITRAMFS
+ depends on TARGET_ROOTFS_INITRAMFS
help
Select ramdisk compression.
config TARGET_INITRAMFS_COMPRESSION_LZO
bool "lzo"
+ config TARGET_INITRAMFS_COMPRESSION_LZ4
+ bool "lz4"
+
config TARGET_INITRAMFS_COMPRESSION_XZ
bool "xz"
endchoice
config TARGET_ROOTFS_EXT4FS
bool "ext4"
default y if USES_EXT4
- depends !TARGET_ROOTFS_INITRAMFS
help
Ext4 file system with some free space for uml images
bool "iso"
default n
depends on TARGET_x86_generic
- depends !TARGET_ROOTFS_INITRAMFS
help
Create some bootable ISO image
config TARGET_ROOTFS_JFFS2
bool "jffs2"
default y if USES_JFFS2
- depends !TARGET_ROOTFS_INITRAMFS
help
Build a jffs2 root filesystem
+ config TARGET_ROOTFS_JFFS2_NAND
+ bool "jffs2 for NAND"
+ default y if USES_JFFS2_NAND
+ depends on USES_JFFS2_NAND
+ help
+ Build a jffs2 root filesystem for NAND flash
+
config TARGET_ROOTFS_SQUASHFS
bool "squashfs"
default y if USES_SQUASHFS
- depends !TARGET_ROOTFS_INITRAMFS
help
Build a squashfs-lzma root filesystem
- config TARGET_ROOTFS_UBIFS
+ menuconfig TARGET_ROOTFS_UBIFS
bool "ubifs"
default y if USES_UBIFS
- depends !TARGET_ROOTFS_INITRAMFS && USES_UBIFS
+ depends on USES_UBIFS
help
Build a ubifs root filesystem
+ choice
+ prompt "compression"
+ default TARGET_UBIFS_COMPRESSION_NONE
+ depends on TARGET_ROOTFS_UBIFS
+ help
+ Select compression type
+
+ config TARGET_UBIFS_COMPRESSION_NONE
+ bool "none"
+
+ config TARGET_UBIFS_COMPRESSION_LZO
+ bool "lzo"
+
+ config TARGET_UBIFS_COMPRESSION_ZLIB
+ bool "zlib"
+ endchoice
+
+ config TARGET_UBIFS_FREE_SPACE_FIXUP
+ bool "free space fixup" if TARGET_ROOTFS_UBIFS
+ default y
+ help
+ The file-system free space has to be fixed up on first mount
+
+ config TARGET_UBIFS_JOURNAL_SIZE
+ string
+ prompt "journal size" if TARGET_ROOTFS_UBIFS
+ default ""
+
comment "Image Options"
source "target/linux/*/image/Config.in"
config TARGET_ROOTFS_PARTSIZE
int "Root filesystem partition size (in MB)"
- depends X86_GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532
+ depends on X86_GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532
default 48
help
- Allows you to change the root filesystem partition size
+ Allows you to change the root filesystem partition size
config TARGET_ROOTFS_MAXINODE
int "Maximum number of inodes in root filesystem"
- depends TARGET_ROOTFS_EXT4FS
+ depends on TARGET_ROOTFS_EXT4FS
default 6000
help
- Allows you to change the maximum number of inodes in the root filesystem
+ Allows you to change the maximum number of inodes in the root filesystem
+
+ config TARGET_ROOTFS_RESERVED_PCT
+ int "Percentage of reserved blocks in root filesystem"
+ depends on TARGET_ROOTFS_EXT4FS
+ default 0
+ help
+ Allows you to change the percentage of reserved blocks in the root filesystem
+
+ menuconfig TARGET_ROOTFS_INCLUDE_KERNEL
+ bool "Include kernel in root filesystem"
+ depends on TARGET_ROOTFS_UBIFS || TARGET_ROOTFS_EXT4FS
+ default n if USES_UBIFS
+ help
+ Include the kernel image in the rootfs. Typically the image is placed
+ below /boot.
+
+ config TARGET_ROOTFS_INCLUDE_UIMAGE
+ bool "include uImage" if TARGET_ROOTFS_INCLUDE_KERNEL
+ default y
+ help
+ This option might not apply to all targets. Make sure
+ to check target/linux/<your_target>/image/Makefile to
+ see if this option will have any effect.
+
+ config TARGET_ROOTFS_INCLUDE_ZIMAGE
+ bool "include zImage" if TARGET_ROOTFS_INCLUDE_KERNEL
+ default y
+ help
+ This option might not apply to all targets. Make sure
+ to check target/linux/<your_target>/image/Makefile to
+ see if this option will have any effect.
+
+ config TARGET_ROOTFS_INCLUDE_FIT
+ bool "include FIT" if TARGET_ROOTFS_INCLUDE_KERNEL
+ default y
+ help
+ This option might not apply to all targets. Make sure
+ to check target/linux/<your_target>/image/Makefile to
+ see if this option will have any effect.
+
+ config TARGET_ROOTFS_INCLUDE_DTB
+ bool "Include DTB in root filesystem"
+ depends on TARGET_ROOTFS_UBIFS || TARGET_ROOTFS_EXT4FS
+ default n if USES_UBIFS
+ help
+ Include the device tree blob file(s) in the rootfs. Typically the DTBs
+ are placed below /boot.
endmenu
prompt "Remove ipkg/opkg status data files in final images"
default n
help
- This removes all ipkg/opkg status data files from the target directory before building the root fs
+ This removes all ipkg/opkg status data files from the target directory before building the root fs
config COLLECT_KERNEL_DEBUG
bool
select KERNEL_DEBUG_INFO
default n
help
- This collects debugging symbols from the kernel and all compiled modules.
- Useful for release builds, so that kernel issues can be debugged offline later.
+ This collects debugging symbols from the kernel and all compiled modules.
+ Useful for release builds, so that kernel issues can be debugged offline later.
comment "Kernel build options"
- config KERNEL_DEBUG_FS
- bool "Compile the kernel with Debug FileSystem enabled"
- default y
- help
- debugfs is a virtual file system that kernel developers use to put
- debugging files into. Enable this option to be able to read and
- write to these files.
-
- config KERNEL_PERF_EVENTS
- bool
- default n
-
- config KERNEL_PROFILING
- bool "Compile the kernel with profiling enabled"
- default n
- select KERNEL_PERF_EVENTS
- help
- Enable the extended profiling support mechanisms used by profilers such
- as OProfile.
-
- config KERNEL_KALLSYMS
- bool "Compile the kernel with symbol table information"
- default n
- help
- This will give you more information in stack traces from kernel oopses
-
- config KERNEL_FTRACE
- bool "Compile the kernel with tracing support"
- default n
-
- config KERNEL_ENABLE_DEFAULT_TRACERS
- bool "Trace process context switches and events"
- depends on KERNEL_FTRACE
- default n
-
- config KERNEL_DEBUG_KERNEL
- bool
- default n
-
- config KERNEL_DEBUG_INFO
- bool "Compile the kernel with debug information"
- default n
- select KERNEL_DEBUG_KERNEL
- help
- This will compile your kernel and modules with debug information.
-
- config KERNEL_DEBUG_LL_UART_NONE
- bool
- default n
- depends on arm
-
- config KERNEL_DEBUG_LL
- bool
- default n
- depends on arm
- select KERNEL_DEBUG_LL_UART_NONE
- help
- ARM low level debugging
-
- config KERNEL_EARLY_PRINTK
- bool "Compile the kernel with early printk"
- default n
- depends on arm
- select KERNEL_DEBUG_KERNEL
- select KERNEL_DEBUG_LL if arm
- help
- Compile the kernel with early printk support.
- This is only useful for debugging purposes to send messages
- over the serial console in early boot.
- Enable this to debug early boot problems.
-
- config KERNEL_AIO
- bool "Compile the kernel with asynchronous IO support"
- default n
-
- config KERNEL_MAGIC_SYSRQ
- bool "Compile the kernel with SysRq support"
- default y
-
- config KERNEL_ELF_CORE
- bool "Enable process core dump support"
- default y
-
- config KERNEL_PROVE_LOCKING
- bool "Enable kernel lock checking"
- select KERNEL_DEBUG_KERNEL
- default n
-
- config KERNEL_PRINTK_TIME
- bool "Enable printk timestamps"
- default y
-
- #
- # CGROUP support symbols
- #
-
- config KERNEL_FREEZER
- bool
- default y if KERNEL_CGROUP_FREEZER
- depends KERNEL_CGROUPS
-
- config KERNEL_CGROUP_FREEZER
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_CGROUP_DEVICE
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_CPUSETS
- bool
- default y if KERNEL_CGROUP_CPUACCT
- depends KERNEL_CGROUPS
-
- config KERNEL_PROC_PID_CPUSET
- bool
- default y if KERNEL_CGROUP_CPUACCT
- depends KERNEL_CGROUPS
-
- config KERNEL_CGROUP_CPUACCT
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_RESOURCE_COUNTERS
- bool
- default y if KERNEL_CGROUP_MEM_RES_CTLR
- depends KERNEL_CGROUPS
-
- config KERNEL_CGROUP_MEM_RES_CTLR
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_CGROUP_MEM_RES_CTLR_SWAP
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_CGROUP_MEM_RES_CTLR_SWAP_ENABLED
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_CGROUP_MEM_RES_CTLR_KMEM
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_CGROUP_PERF
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_CFS_BANDWIDTH
- bool
- default y if KERNEL_FAIR_GROUP_SCHED
- depends KERNEL_CGROUP_SCHED
-
- config KERNEL_FAIR_GROUP_SCHED
- bool
- default y if KERNEL_CGROUP_SCHED
- depends KERNEL_CGROUP_SCHED
-
- config KERNEL_RT_GROUP_SCHED
- bool
- default y if KERNEL_CGROUP_SCHED
- depends KERNEL_CGROUP_SCHED
-
- config KERNEL_CGROUP_SCHED
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_NET_CLS_CGROUP
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_NETPRIO_CGROUP
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_BLK_CGROUP
- bool
- depends KERNEL_CGROUPS
-
- config KERNEL_DEBUG_BLK_CGROUP
- bool
- default n if KERNEL_CGROUPS
- depends KERNEL_CGROUPS
-
- config KERNEL_CGROUPS
- bool "Enable kernel cgroups"
- default n
- select KERNEL_CGROUP_FREEZER
- select KERNEL_CGROUP_DEVICE
- select KERNEL_CGROUP_CPUACCT
- select KERNEL_CGROUP_MEM_RES_CTLR
- select KERNEL_CGROUP_MEM_RES_CTLR_SWAP
- select KERNEL_CGROUP_MEM_RES_CTLR_SWAP_ENABLED
- select KERNEL_CGROUP_MEM_RES_CTLR_KMEM
- select KERNEL_CGROUP_PERF
- select KERNEL_CGROUP_SCHED
- select KERNEL_NET_CLS_CGROUP
- select KERNEL_NETPRIO_CGROUP
- select KERNEL_BLK_CGROUP
-
- #
- # Namespace support symbols
- #
-
- config KERNEL_UTS_NS
- bool
- depends KERNEL_NAMESPACES
-
- config KERNEL_IPC_NS
- bool
- depends KERNEL_NAMESPACES
-
- config KERNEL_USER_NS
- bool
- depends KERNEL_NAMESPACES
-
- config KERNEL_PID_NS
- bool
- depends KERNEL_NAMESPACES
-
- config KERNEL_NET_NS
- bool
- depends KERNEL_NAMESPACES
-
- config KERNEL_DEVPTS_MULTIPLE_INSTANCES
- bool
- depends KERNEL_NAMESPACES
-
- config KERNEL_NAMESPACES
- bool "Enable kernel namespaces"
- default n
- select KERNEL_UTS_NS
- select KERNEL_IPC_NS
- select KERNEL_USER_NS
- select KERNEL_PID_NS
- select KERNEL_NET_NS
- select KERNEL_DEVPTS_MULTIPLE_INSTANCES
-
+ source "Config-kernel.in"
comment "Package build options"
Only say Y, if you don't mind fixing broken packages.
Before reporting build bugs, set this to N and re-run the build.
- config TOOLCHAIN_PARALLEL
- bool
- prompt "Parallelize the toolchain build (May break build)"
- depends on PKG_BUILD_PARALLEL
- depends on BROKEN
- default n
- help
- Build the toolchain with parallel make jobs.
- This speeds up the toolchain build on SMP machines, but may
- break the build for certain toolchain versions.
-
- If you say Y, toolchain build might break.
- Before reporting build bugs, set this to N and re-run the build.
-
comment "Stripping options"
choice
prompt "Binary stripping method"
default USE_STRIP if EXTERNAL_TOOLCHAIN
- default USE_STRIP if USE_GLIBC || USE_EGLIBC
+ default USE_STRIP if USE_GLIBC || USE_EGLIBC || USE_MUSL
default USE_SSTRIP
help
Select the binary stripping method you wish to use.
config USE_SSTRIP
bool "sstrip"
- depends !DEBUG
- depends !USE_GLIBC
- depends !USE_EGLIBC
+ depends on !DEBUG
+ depends on !USE_GLIBC
+ depends on !USE_EGLIBC
help
This will install binaries stripped using sstrip
endchoice
config STRIP_ARGS
string
prompt "Strip arguments"
- depends USE_STRIP
+ depends on USE_STRIP
default "--strip-unneeded --remove-section=.comment --remove-section=.note" if DEBUG
default "--strip-all"
help
config USE_LIBSTDCXX
bool "libstdc++"
-
endchoice
endmenu
in the package directory, pointing to the .git tree that you want
to pull the source code from
+ config EXTRA_OPTIMIZATION
+ string "Additional compiler options" if DEVEL
+ default "-fno-caller-saves"
+ help
+ Extra Target-independent optimizations to use when building for the target.
+
menuconfig TARGET_OPTIONS
bool "Target Options" if DEVEL
config SOFT_FLOAT
bool "Use software floating point by default" if TARGET_OPTIONS
default y
- depends on (arm || armeb || powerpc || mipsel || mips) && !HAS_FPU
+ depends on (arm || armeb || powerpc || mipsel || mips || mips64el || mips64) && !HAS_FPU
help
If your target CPU does not have a Floating Point Unit (FPU) or a
kernel FPU emulator, but you still wish to support floating point
Most people will answer N.
+ config USE_MIPS16
+ bool "Build packages with MIPS16 instructions" if TARGET_OPTIONS
+ depends on HAS_MIPS16
+ depends on !GCC_VERSION_4_6
+ default y
+ help
+ If your target CPU does support the MIPS16 instruction set
+ and you want to use it for packages, enable this option.
+ MIPS16 produces smaller binaries thus reducing pressure on
+ caches and TLB.
+
+ Most people will answer N.
+
source "toolchain/Config.in"
source "target/imagebuilder/Config.in"