+#~ msgid ""
+#~ "This section allows you to modify the content of \"/etc/mwan3.user\".<br /"
+#~ ">The file is also preserved during sysupgrade.<br /><br />Notes:<br /"
+#~ ">This file is interpreted as a shell script.<br />The first line of the "
+#~ "script must be "#!/bin/sh" without quotes.<br />Lines beginning "
+#~ "with # are comments and are not executed.<br />Put your custom mwan3 "
+#~ "action here, they will<br />be executed with each netifd hotplug "
+#~ "interface event<br />on interfaces for which mwan3 is enabled.<br /><br /"
+#~ ">There are three main environment variables that are passed to this "
+#~ "script.<br /><br />$ACTION Either \"ifup\" or \"ifdown\"<br />$INTERFACE "
+#~ "Name of the interface which went up or down (e.g. \"wan\" or \"wwan"
+#~ "\")<br />$DEVICE Physical device name which interface went up or down (e."
+#~ "g. \"eth0\" or \"wwan0\")<br /><br />"
+#~ msgstr ""
+#~ "這裡允許您修改“/etc/mwan3.user”的內容。<br />該檔案在 sysupgrade 期間也會"
+#~ "保留。<br /><br />注意:<br />該檔案會作為 shell 指令碼解釋。<br />指令碼"
+#~ "的第一行必須是"#!/bin/sh",不帶引號。<br />以#開頭的行是註釋,不會"
+#~ "執行。<br />將您的自定義 mwan3 動作放在這裡,他們將<br />在啟用 mwan3 的介"
+#~ "面上<br />在 netifd hotplug 介面事件時執行。<br /><br />有三個主要的環境變"
+#~ "數傳遞給這個腳本。<br /><br />$ACTION “ifup”或“ifdown”<br />$INTERFACE 啟"
+#~ "動或停止的介面名(例如“wan”或“wwan”)<br />$DEVICE 啟動或停止介面的物理裝"
+#~ "置名(例如“eth0”或“wwan0”)<br /><br />"
+
+#~ msgid "Currently Configured Interfaces"
+#~ msgstr "當前配置的介面"
+
+#~ msgid "Currently Configured Members"
+#~ msgstr "當前配置的成員"
+
+#~ msgid "Currently Configured Policies"
+#~ msgstr "當前配置的策略"
+
+#~ msgid "Detailed Status"
+#~ msgstr "詳細狀態"
+
+#~ msgid "Diagnostic Results"
+#~ msgstr "診斷結果"
+
+#~ msgid "Error collecting troubleshooting information"
+#~ msgstr "收集故障排除資訊時出錯"
+
+#~ msgid "Errors"
+#~ msgstr "錯誤"
+
+#~ msgid "Globals mwan3 options"
+#~ msgstr "全域性 mwan3 選項"
+
+#~ msgid "Interface Status"
+#~ msgstr "介面狀態"
+
+#~ msgid "Last 50 MWAN systemlog entries. Newest entries sorted at the top :"
+#~ msgstr "最近 50 條 MWAN 系統日誌,最新條目排在頂部:"
+
+#~ msgid "MWAN Detailed Status"
+#~ msgstr "MWAN 詳細狀態"
+
+#~ msgid "MWAN Interface Configuration"
+#~ msgstr "MWAN 介面配置"
+
+#~ msgid "MWAN Interface Diagnostics"
+#~ msgstr "MWAN 介面診斷"
+
+#~ msgid "MWAN Interface Systemlog"
+#~ msgstr "MWAN 介面系統日誌"
+
+#~ msgid "MWAN Member Configuration"
+#~ msgstr "MWAN 成員配置"
+
+#~ msgid "MWAN Policy Configuration"
+#~ msgstr "MWAN 策略配置"
+
+#~ msgid "MWAN Rule Configuration"
+#~ msgstr "MWAN 規則配置"
+
+#~ msgid "MWAN Service Control"
+#~ msgstr "MWAN 服務控制"
+
+#~ msgid "No MWAN systemlog history found"
+#~ msgstr "沒有在系統日誌中找到 MWAN 歷史資訊"
+
+#~ msgid "No detailed status information available"
+#~ msgstr "沒有狀態詳細資訊可用"
+
+#~ msgid "No diagnostic results returned"
+#~ msgstr "沒有返回診斷結果"
+
+#~ msgid "No protocol specified"
+#~ msgstr "未指定協議"
+
+#~ msgid "Restart MWAN"
+#~ msgstr "重啟 MWAN"
+
+#~ msgid ""
+#~ "Rules specify which traffic will use a particular MWAN policy based on IP "
+#~ "address, port or protocol<br />Rules are matched from top to bottom. "
+#~ "Rules below a matching rule are ignored. Traffic not matching any rule is "
+#~ "routed using the main routing table<br />Traffic destined for known "
+#~ "(other than default) networks is handled by the main routing table. "
+#~ "Traffic matching a rule, but all WAN interfaces for that policy are down "
+#~ "will be blackholed<br />Names may contain characters A-Z, a-z, 0-9, _ and "
+#~ "no spaces<br />Rules may not share the same name as configured "
+#~ "interfaces, members or policies"
+#~ msgstr ""
+#~ "“規則”基於 IP 位址、協議、埠把流量劃分到指定的“策略”中。<br />規則按照從上"
+#~ "到下的順序進行匹配。除了第一條能夠匹配一次通訊的規則以外,其它規則將被忽"
+#~ "略。不匹配任何規則的通訊將會由系統預設路由表進行。<br />來自已知的網路的轉"
+#~ "發流量由系統預設路由表接手,然後 MWAN 從中匹配出相應的流量並轉移到 MWAN 自"
+#~ "己的路由表。但是所有被劃分到一個無法使用的策略的流量將會無法正常進行路由。"
+#~ "<br />名稱允許包括A-Z、a-z、0-9、_ 但是不能有空格。<br />規則不應該與介"
+#~ "面、成員、策略中的任意一個設定項使用相同的名稱"
+
+#~ msgid "Start MWAN"
+#~ msgstr "啟動 MWAN"
+
+#~ msgid "Stop MWAN"
+#~ msgstr "停止 MWAN"
+
+#~ msgid "Tracking IP"
+#~ msgstr "跟蹤的 IP"
+
+#~ msgid "Traffic Rules"
+#~ msgstr "流量規則"
+
+#~ msgid "Troubleshooting Data"
+#~ msgstr "故障排除資料"
+
+#~ msgid "View the contents of /etc/protocols for protocol descriptions"
+#~ msgstr "請檢視 /etc/protocols 獲取可選協議詳情"
+
+#~ msgid ""
+#~ "WARNING: Some interfaces are configured incorrectly or not at all in /etc/"
+#~ "config/network!"
+#~ msgstr "警告:某些介面配置不正確或未配置到 /etc/config/network!"
+
+#~ msgid ""
+#~ "WARNING: Some interfaces have a higher reliability requirement than there "
+#~ "are tracking IP addresses!"
+#~ msgstr "警告:某些介面的跟蹤可靠性要求大於了跟蹤 IP 位址總數!"
+
+#~ msgid ""
+#~ "WARNING: Some interfaces have duplicate metrics configured in /etc/config/"
+#~ "network!"
+#~ msgstr "警告:某些介面在 /etc/config/network 中配置了相同的躍點數!"
+
+#~ msgid ""
+#~ "WARNING: Some interfaces have no default route in the main routing table!"
+#~ msgstr "警告:某些介面在主路由表中沒有預設路由!"
+
+#~ msgid ""
+#~ "WARNING: Some interfaces have no metric configured in /etc/config/network!"
+#~ msgstr "警告:某些介面沒有在 /etc/config/network 中配置躍點數!"
+
+#~ msgid ""
+#~ "WARNING: Some policies have names exceeding the maximum of 15 characters!"
+#~ msgstr "警告:某些策略的名稱超過了 15 個字元!"
+
+#~ msgid ""
+#~ "WARNING: Some rules have a port configured with no or improper protocol "
+#~ "specified! Please configure a specific protocol!"
+#~ msgstr ""
+#~ "警告:某些規則指定了埠卻沒有配置或配置了不正確的協議,請重新指定協議!"
+
+#~ msgid ""
+#~ "WARNING: This and other interfaces have duplicate metrics configured in /"
+#~ "etc/config/network!"
+#~ msgstr "警告:此介面和其他介面在 /etc/config/network 中配置了相同的躍點數!"
+
+#~ msgid ""
+#~ "WARNING: This interface has a higher reliability requirement than there "
+#~ "are tracking IP addresses!"
+#~ msgstr "警告:此介面的跟蹤可靠性要求大於了跟蹤 IP 位址總數!"
+
+#~ msgid ""
+#~ "WARNING: This interface has no default route in the main routing table!"
+#~ msgstr "警告:此介面在主路由表中沒有預設路由!"
+
+#~ msgid ""
+#~ "WARNING: This interface has no metric configured in /etc/config/network!"
+#~ msgstr "警告:此介面沒有在 /etc/config/network 中配置躍點數!"
+
+#~ msgid ""
+#~ "WARNING: This interface is configured incorrectly or not at all in /etc/"
+#~ "config/network!"
+#~ msgstr "警告:此介面配置不正確或未配置到 /etc/config/network!"
+
+#~ msgid ""
+#~ "WARNING: This policy's name is %d characters exceeding the maximum of 15!"
+#~ msgstr "警告:此策略的名稱具有 %d 個字元,超過了 15 個字元!"
+
+#~ msgid ""
+#~ "WARNING: This rule is incorrectly configured with no or improper protocol "
+#~ "specified! Please configure a specific protocol!"
+#~ msgstr "警告:此規則沒有配置或配置了不正確的協議,請重新指定協議!"
+
+#~ msgid "Waiting for MWAN to %s..."
+#~ msgstr "等待 MWAN %s..."
+
+#~ msgid "Waiting for diagnostic results..."
+#~ msgstr "等待診斷結果..."
+
+#~ msgid "restart"
+#~ msgstr "重啟"
+
+#~ msgid "start"
+#~ msgstr "啟動"
+
+#~ msgid "stop"
+#~ msgstr "停止"