target/linux/xburst/patches-2.6.36/801-n526-lpc.patch

   1 From 626675b8f03f416a6b1c50f69dabb8a3f27b200a Mon Sep 17 00:00:00 2001
   2 From: Lars-Peter Clausen <lars@metafoo.de>
   3 Date: Wed, 12 May 2010 14:23:43 +0200
   4 Subject: [PATCH] Add n526 lpc driver
   5
   6 ---
   7  drivers/misc/Kconfig    |    9 ++
   8  drivers/misc/Makefile   |    1 +
   9  drivers/misc/n526-lpc.c |  238 +++++++++++++++++++++++++++++++++++++++++++++++
  10  3 files changed, 248 insertions(+), 0 deletions(-)
  11  create mode 100644 drivers/misc/n526-lpc.c
  12
  13 --- a/drivers/misc/Kconfig
  14 +++ b/drivers/misc/Kconfig
  15 @@ -398,6 +398,15 @@ config N516_LPC
  16         help
  17           N516 keyboard & power controller driver
  18
  19 +config N526_LPC
  20 +       tristate "N526 LPC934 coprocessor"
  21 +       depends on JZ4740_N526
  22 +       help
  23 +         If you say yes here you get support for the N526s NXP LPC934 coprocessor.
  24 +         It is used as a keyboard controllor and for power management.
  25 +
  26 +         If you have a N526 you probably want to say Y here.
  27 +
  28  source "drivers/misc/c2port/Kconfig"
  29  source "drivers/misc/eeprom/Kconfig"
  30  source "drivers/misc/cb710/Kconfig"
  31 --- a/drivers/misc/Makefile
  32 +++ b/drivers/misc/Makefile
  33 @@ -36,3 +36,4 @@ obj-y                         += cb710/
  34  obj-$(CONFIG_VMWARE_BALLOON)   += vmw_balloon.o
  35  obj-$(CONFIG_ARM_CHARLCD)      += arm-charlcd.o
  36  obj-$(CONFIG_N516_LPC)         += n516-lpc.o
  37 +obj-$(CONFIG_N526_LPC)         += n526-lpc.o
  38 --- /dev/null
  39 +++ b/drivers/misc/n526-lpc.c
  40 @@ -0,0 +1,238 @@
  41 +/*
  42 + * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
  43 + *
  44 + * This program is free software; you can redistribute it and/or modify
  45 + * it under the terms of the GNU General Public License version 2 as
  46 + * published by the Free Software Foundation.
  47 + *
  48 + *  You should have received a copy of the  GNU General Public License along
  49 + *  with this program; if not, write  to the Free Software Foundation, Inc.,
  50 + *  675 Mass Ave, Cambridge, MA 02139, USA.
  51 + *
  52 + */
  53 +
  54 +#include <linux/kernel.h>
  55 +#include <linux/module.h>
  56 +#include <linux/i2c.h>
  57 +#include <linux/input.h>
  58 +#include <linux/irq.h>
  59 +#include <linux/interrupt.h>
  60 +#include <linux/slab.h>
  61 +
  62 +#include <linux/workqueue.h>
  63 +
  64 +#include <asm/mach-jz4740/irq.h>
  65 +#include <asm/mach-jz4740/gpio.h>
  66 +
  67 +struct n526_lpc {
  68 +       struct i2c_client *client;
  69 +       struct input_dev *input;
  70 +
  71 +       struct work_struct work;
  72 +};
  73 +
  74 +static const unsigned int n526_lpc_keymap[] = {
  75 +       [0x01] = KEY_PAGEUP,
  76 +       [0x02] = KEY_PAGEDOWN,
  77 +       [0x03] = KEY_VOLUMEUP,
  78 +       [0x04] = KEY_VOLUMEDOWN,
  79 +       [0x06] = KEY_1,
  80 +       [0x07] = KEY_Q,
  81 +       [0x08] = KEY_A,
  82 +       [0x09] = KEY_Z,
  83 +       [0x0a] = KEY_LEFTSHIFT,
  84 +       [0x0b] = KEY_2,
  85 +       [0x0c] = KEY_W,
  86 +       [0x0d] = KEY_S,
  87 +       [0x0e] = KEY_X,
  88 +       [0x0f] = KEY_REFRESH,
  89 +       [0x10] = KEY_3,
  90 +       [0x11] = KEY_E,
  91 +       [0x12] = KEY_D,
  92 +       [0x13] = KEY_C,
  93 +       [0x14] = KEY_DOCUMENTS,
  94 +       [0x15] = KEY_4,
  95 +       [0x16] = KEY_R,
  96 +       [0x17] = KEY_F,
  97 +       [0x18] = KEY_V,
  98 +       [0x19] = KEY_MUTE,
  99 +       [0x1a] = KEY_5,
 100 +       [0x1b] = KEY_T,
 101 +       [0x1c] = KEY_G,
 102 +       [0x1d] = KEY_B,
 103 +       [0x1e] = KEY_DELETE,
 104 +       [0x1f] = KEY_6,
 105 +       [0x20] = KEY_Y,
 106 +       [0x21] = KEY_H,
 107 +       [0x22] = KEY_N,
 108 +       [0x23] = KEY_SPACE,
 109 +       [0x24] = KEY_7,
 110 +       [0x25] = KEY_U,
 111 +       [0x26] = KEY_J,
 112 +       [0x27] = KEY_M,
 113 +/*     [0x28] = KEY_SYM, */
 114 +       [0x29] = KEY_8,
 115 +       [0x2a] = KEY_I,
 116 +       [0x2b] = KEY_K,
 117 +       [0x2c] = KEY_MENU,
 118 +       [0x2d] = KEY_LEFT,
 119 +       [0x2e] = KEY_9,
 120 +       [0x2f] = KEY_O,
 121 +       [0x30] = KEY_L,
 122 +       [0x31] = KEY_UP,
 123 +       [0x32] = KEY_DOWN,
 124 +       [0x33] = KEY_0,
 125 +       [0x34] = KEY_P,
 126 +       [0x35] = KEY_BACKSPACE,
 127 +       [0x36] = KEY_ENTER,
 128 +       [0x37] = KEY_RIGHT,
 129 +};
 130 +
 131 +static void n526_lpc_irq_work(struct work_struct *work)
 132 +{
 133 +       int ret;
 134 +       struct n526_lpc *n526_lpc = container_of(work, struct n526_lpc, work);
 135 +       struct i2c_client *client = n526_lpc->client;
 136 +       unsigned char raw_msg;
 137 +       struct i2c_msg msg = {client->addr, client->flags | I2C_M_RD, 1, &raw_msg};
 138 +       unsigned char keycode;
 139 +
 140 +
 141 +       ret = i2c_transfer(client->adapter, &msg, 1);
 142 +
 143 +       if (ret != 1) {
 144 +               dev_err(&client->dev, "Failed to read lpc status\n");
 145 +       }
 146 +
 147 +       keycode = raw_msg & 0x7f;
 148 +
 149 +       if (keycode < ARRAY_SIZE(n526_lpc_keymap)) {
 150 +               input_report_key(n526_lpc->input, n526_lpc_keymap[keycode],
 151 +                                !(raw_msg & 0x80));
 152 +               input_sync(n526_lpc->input);
 153 +       }
 154 +}
 155 +
 156 +static irqreturn_t n526_lpc_irq(int irq, void *dev_id)
 157 +{
 158 +       struct n526_lpc *n526_lpc = dev_id;
 159 +
 160 +       schedule_work(&n526_lpc->work);
 161 +       return IRQ_HANDLED;
 162 +}
 163 +
 164 +static int __devinit n526_lpc_probe(struct i2c_client *client,
 165 +               const struct i2c_device_id *id)
 166 +{
 167 +       int ret;
 168 +       size_t i;
 169 +       struct n526_lpc *n526_lpc;
 170 +       struct input_dev *input;
 171 +
 172 +       n526_lpc = kmalloc(sizeof(*n526_lpc), GFP_KERNEL);
 173 +
 174 +       if (!n526_lpc) {
 175 +               dev_err(&client->dev, "Failed to allocate device structure\n");
 176 +               return -ENOMEM;
 177 +       }
 178 +
 179 +       input = input_allocate_device();
 180 +       if (!input) {
 181 +               dev_err(&client->dev, "Failed to allocate input device\n");
 182 +               ret = -ENOMEM;
 183 +               goto err_free;
 184 +       }
 185 +
 186 +       input->name = "n526-keys";
 187 +       input->phys = "n526-keys/input0";
 188 +       input->dev.parent = &client->dev;
 189 +       input->id.bustype = BUS_I2C;
 190 +       input->id.vendor  = 0x0001;
 191 +       input->id.product = 0x0001;
 192 +       input->id.version = 0x0001;
 193 +
 194 +       __set_bit(EV_KEY, input->evbit);
 195 +
 196 +       for (i = 0; i < ARRAY_SIZE(n526_lpc_keymap); ++i) {
 197 +               if (n526_lpc_keymap[i] != 0)
 198 +                       __set_bit(n526_lpc_keymap[i], input->keybit);
 199 +       }
 200 +
 201 +       ret = input_register_device(input);
 202 +
 203 +       if (ret) {
 204 +               dev_err(&client->dev, "Failed to register input device: %d\n", ret);
 205 +               goto err_free_input;
 206 +       }
 207 +
 208 +       n526_lpc->client = client;
 209 +       n526_lpc->input  = input;
 210 +       INIT_WORK(&n526_lpc->work, n526_lpc_irq_work);
 211 +
 212 +       ret = request_irq(client->irq, n526_lpc_irq, IRQF_TRIGGER_FALLING,
 213 +                         "n526-lpc", n526_lpc);
 214 +       if (ret) {
 215 +               dev_err(&client->dev, "Failed to request irq: %d\n", ret);
 216 +               goto err_unregister_input;
 217 +       }
 218 +
 219 +       i2c_set_clientdata(client, n526_lpc);
 220 +
 221 +       return 0;
 222 +
 223 +err_unregister_input:
 224 +       input_unregister_device(input);
 225 +err_free_input:
 226 +       input_free_device(input);
 227 +err_free:
 228 +       kfree(n526_lpc);
 229 +
 230 +       return ret;
 231 +}
 232 +
 233 +static int n526_lpc_remove(struct i2c_client *client)
 234 +{
 235 +       struct n526_lpc *n526_lpc = i2c_get_clientdata(client);
 236 +
 237 +       free_irq(client->irq, n526_lpc);
 238 +
 239 +       i2c_set_clientdata(client, NULL);
 240 +       input_unregister_device(n526_lpc->input);
 241 +       input_free_device(n526_lpc->input);
 242 +       kfree(n526_lpc);
 243 +
 244 + return 0;
 245 +}
 246 +
 247 +static const struct i2c_device_id n526_lpc_id[] = {
 248 +       { "n526-lpc", 0 },
 249 +       { }
 250 +};
 251 +MODULE_DEVICE_TABLE(i2c, n526_lpc_id);
 252 +
 253 +static struct i2c_driver n526_lpc_driver = {
 254 +       .driver = {
 255 +               .name = "n526-lpc",
 256 +               .owner = THIS_MODULE,
 257 +       },
 258 +       .probe = n526_lpc_probe,
 259 +       .remove = n526_lpc_remove,
 260 +       .id_table = n526_lpc_id,
 261 +};
 262 +
 263 +static int __init n526_lpc_init(void)
 264 +{
 265 +       return i2c_add_driver(&n526_lpc_driver);
 266 +}
 267 +module_init(n526_lpc_init);
 268 +
 269 +static void __exit n526_lpc_exit(void)
 270 +{
 271 +       i2c_del_driver(&n526_lpc_driver);
 272 +}
 273 +module_exit(n526_lpc_exit);
 274 +
 275 +MODULE_LICENSE("GPL");
 276 +MODULE_AUTHOR("Lars-Peter Clausen");
 277 +MODULE_DESCRIPTION("n526 keypad driver");
 278 +MODULE_ALIAS("i2c:n526-keys");