target/linux/sunxi/base-files/lib/firmware/brcm/brcmfmac4329-sdio.txt

   1 #AP6210_NVRAM_V1.2_03192013\r
   2 manfid=0x2d0\r
   3 prodid=0x492\r
   4 vendid=0x14e4\r
   5 devid=0x4343\r
   6 boardtype=0x0598\r
   7 \r
   8 # Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same\r
   9 #Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305\r
  10 boardrev=0x1307\r
  11 boardnum=777\r
  12 xtalfreq=26000\r
  13 boardflags=0x80201\r
  14 boardflags2=0x80\r
  15 sromrev=3\r
  16 wl0id=0x431b\r
  17 macaddr=00:90:4c:07:71:12\r
  18 aa2g=1\r
  19 ag0=2\r
  20 maxp2ga0=74\r
  21 cck2gpo=0x2222\r
  22 ofdm2gpo=0x44444444\r
  23 mcs2gpo0=0x6666\r
  24 mcs2gpo1=0x6666\r
  25 pa0maxpwr=56\r
  26 \r
  27 #P207 PA params\r
  28 #pa0b0=5447\r
  29 #pa0b1=-658\r
  30 #pa0b2=-175<div></div>\r
  31 \r
  32 #Same PA params for P304,P305, P306, P307\r
  33 \r
  34 pa0b0=5447\r
  35 pa0b1=-607\r
  36 pa0b2=-160\r
  37 pa0itssit=62\r
  38 pa1itssit=62\r
  39 \r
  40 \r
  41 cckPwrOffset=5\r
  42 ccode=0\r
  43 rssismf2g=0xa\r
  44 rssismc2g=0x3\r
  45 rssisav2g=0x7\r
  46 triso2g=0\r
  47 noise_cal_enable_2g=0\r
  48 noise_cal_po_2g=0\r
  49 swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff\r
  50 temp_add=29767\r
  51 temp_mult=425\r
  52 \r
  53 btc_flags=0x6\r
  54 btc_params0=5000\r
  55 btc_params1=1000\r
  56 btc_params6=63\r
  57 \r