1 /* Smedia Glamo 336x/337x driver
3 * (C) 2007 by Openmoko, Inc.
4 * Author: Harald Welte <laforge@openmoko.org>
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 #include <linux/module.h>
24 #include <linux/kernel.h>
25 #include <linux/errno.h>
26 #include <linux/string.h>
28 #include <linux/delay.h>
30 #include <linux/init.h>
31 #include <linux/irq.h>
32 #include <linux/interrupt.h>
33 #include <linux/workqueue.h>
34 #include <linux/platform_device.h>
35 #include <linux/kernel_stat.h>
36 #include <linux/spinlock.h>
37 #include <linux/mfd/core.h>
38 #include <linux/mfd/glamo.h>
39 #include <linux/glamofb.h>
42 #include <asm/div64.h>
46 #include "glamo-regs.h"
47 #include "glamo-core.h"
49 #define GLAMO_MEM_REFRESH_COUNT 0x100
52 * Glamo internal settings
54 * We run the memory interface from the faster PLLB on 2.6.28 kernels and
55 * above. Couple of GTA02 users report trouble with memory bus when they
56 * upgraded from 2.6.24. So this parameter allows reversion to 2.6.24
57 * scheme if their Glamo chip needs it.
59 * you can override the faster default on kernel commandline using
61 * glamo3362.slow_memory=1
66 static int slow_memory = 0;
67 module_param(slow_memory, int, 0644);
76 struct reg_range reg_range[] = {
77 { 0x0000, 0x76, "General", 1 },
78 { 0x0200, 0x18, "Host Bus", 1 },
79 { 0x0300, 0x38, "Memory", 1 },
80 /* { 0x0400, 0x100, "Sensor", 0 }, */
81 /* { 0x0500, 0x300, "ISP", 0 }, */
82 /* { 0x0800, 0x400, "JPEG", 0 }, */
83 /* { 0x0c00, 0xcc, "MPEG", 0 }, */
84 { 0x1100, 0xb2, "LCD 1", 1 },
85 { 0x1200, 0x64, "LCD 2", 1 },
86 { 0x1400, 0x42, "MMC", 1 },
87 /* { 0x1500, 0x080, "MPU 0", 0 },
88 { 0x1580, 0x080, "MPU 1", 0 },
89 { 0x1600, 0x080, "Cmd Queue", 0 },
90 { 0x1680, 0x080, "RISC CPU", 0 },*/
91 { 0x1700, 0x400, "2D Unit", 0 },
92 /* { 0x1b00, 0x900, "3D Unit", 0 }, */
95 static inline void __reg_write(struct glamo_core *glamo,
96 u_int16_t reg, u_int16_t val)
98 writew(val, glamo->base + reg);
101 static inline u_int16_t __reg_read(struct glamo_core *glamo,
104 return readw(glamo->base + reg);
107 static void __reg_set_bit_mask(struct glamo_core *glamo,
108 u_int16_t reg, u_int16_t mask,
115 tmp = __reg_read(glamo, reg);
118 __reg_write(glamo, reg, tmp);
121 static void reg_set_bit_mask(struct glamo_core *glamo,
122 u_int16_t reg, u_int16_t mask,
125 spin_lock(&glamo->lock);
126 __reg_set_bit_mask(glamo, reg, mask, val);
127 spin_unlock(&glamo->lock);
130 static inline void __reg_set_bit(struct glamo_core *glamo,
131 u_int16_t reg, u_int16_t bit)
133 __reg_set_bit_mask(glamo, reg, bit, 0xffff);
136 static inline void __reg_clear_bit(struct glamo_core *glamo,
137 u_int16_t reg, u_int16_t bit)
139 __reg_set_bit_mask(glamo, reg, bit, 0);
142 /***********************************************************************
143 * resources of sibling devices
144 ***********************************************************************/
146 static struct resource glamo_fb_resources[] = {
148 .name = "glamo-fb-regs",
149 .start = GLAMO_REGOFS_LCD,
150 .end = GLAMO_REGOFS_MMC - 1,
151 .flags = IORESOURCE_MEM,
153 .name = "glamo-fb-mem",
154 .start = GLAMO_OFFSET_FB,
155 .end = GLAMO_OFFSET_FB + GLAMO_FB_SIZE - 1,
156 .flags = IORESOURCE_MEM,
160 static struct resource glamo_mmc_resources[] = {
162 .start = GLAMO_REGOFS_MMC,
163 .end = GLAMO_REGOFS_MPROC0 - 1,
164 .flags = IORESOURCE_MEM
166 .start = IRQ_GLAMO_MMC,
167 .end = IRQ_GLAMO_MMC,
168 .flags = IORESOURCE_IRQ,
169 }, { /* our data buffer for MMC transfers */
170 .start = GLAMO_OFFSET_FB + GLAMO_FB_SIZE,
171 .end = GLAMO_OFFSET_FB + GLAMO_FB_SIZE +
172 GLAMO_MMC_BUFFER_SIZE - 1,
173 .flags = IORESOURCE_MEM
183 static struct mfd_cell glamo_cells[] = {
186 .num_resources = ARRAY_SIZE(glamo_fb_resources),
187 .resources = glamo_fb_resources,
191 .num_resources = ARRAY_SIZE(glamo_mmc_resources),
192 .resources = glamo_mmc_resources,
194 [GLAMO_CELL_GPIO] = {
195 .name = "glamo-gpio",
200 /***********************************************************************
202 ***********************************************************************/
203 #define irq2glamo(x) (x - IRQ_GLAMO(0))
205 static void glamo_ack_irq(unsigned int irq)
207 struct glamo_core *glamo = (struct glamo_core*)get_irq_chip_data(irq);
208 /* clear interrupt source */
209 __reg_write(glamo, GLAMO_REG_IRQ_CLEAR,
210 1 << irq2glamo(irq));
213 static void glamo_mask_irq(unsigned int irq)
215 struct glamo_core *glamo = (struct glamo_core*)get_irq_chip_data(irq);
218 /* clear bit in enable register */
219 tmp = __reg_read(glamo, GLAMO_REG_IRQ_ENABLE);
220 tmp &= ~(1 << irq2glamo(irq));
221 __reg_write(glamo, GLAMO_REG_IRQ_ENABLE, tmp);
224 static void glamo_unmask_irq(unsigned int irq)
226 struct glamo_core *glamo = (struct glamo_core*)get_irq_chip_data(irq);
229 /* set bit in enable register */
230 tmp = __reg_read(glamo, GLAMO_REG_IRQ_ENABLE);
231 tmp |= (1 << irq2glamo(irq));
232 __reg_write(glamo, GLAMO_REG_IRQ_ENABLE, tmp);
235 static struct irq_chip glamo_irq_chip = {
237 .ack = glamo_ack_irq,
238 .mask = glamo_mask_irq,
239 .unmask = glamo_unmask_irq,
242 static void glamo_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
244 struct glamo_core *glamo = get_irq_desc_chip_data(desc);
245 desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
247 if (unlikely(desc->status & IRQ_INPROGRESS)) {
248 desc->status |= (IRQ_PENDING | IRQ_MASKED);
249 desc->chip->mask(irq);
250 desc->chip->ack(irq);
253 kstat_incr_irqs_this_cpu(irq, desc);
255 desc->chip->ack(irq);
256 desc->status |= IRQ_INPROGRESS;
262 if (unlikely((desc->status &
263 (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
264 (IRQ_PENDING | IRQ_MASKED))) {
265 /* dealing with pending IRQ, unmasking */
266 desc->chip->unmask(irq);
267 desc->status &= ~IRQ_MASKED;
270 desc->status &= ~IRQ_PENDING;
272 /* read IRQ status register */
273 irqstatus = __reg_read(glamo, GLAMO_REG_IRQ_STATUS);
274 for (i = 0; i < 9; i++)
275 if (irqstatus & (1 << i))
276 desc_handle_irq(IRQ_GLAMO(i),
277 irq_desc+IRQ_GLAMO(i));
279 } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
281 desc->status &= ~IRQ_INPROGRESS;
285 static ssize_t regs_write(struct device *dev, struct device_attribute *attr,
286 const char *buf, size_t count)
288 unsigned long reg = simple_strtoul(buf, NULL, 10);
289 struct glamo_core *glamo = dev_get_drvdata(dev);
291 while (*buf && (*buf != ' '))
295 while (*buf && (*buf == ' '))
300 printk(KERN_INFO"reg 0x%02lX <-- 0x%04lX\n",
301 reg, simple_strtoul(buf, NULL, 10));
303 __reg_write(glamo, reg, simple_strtoul(buf, NULL, 10));
308 static ssize_t regs_read(struct device *dev, struct device_attribute *attr,
311 struct glamo_core *glamo = dev_get_drvdata(dev);
315 spin_lock(&glamo->lock);
317 for (r = 0; r < ARRAY_SIZE(reg_range); r++) {
318 if (!reg_range[r].dump)
321 end += sprintf(end, "\n%s\n", reg_range[r].name);
322 for (n = reg_range[r].start;
323 n < reg_range[r].start + reg_range[r].count; n += 2) {
324 if (((n1++) & 7) == 0)
325 end += sprintf(end, "\n%04X: ", n);
326 end += sprintf(end, "%04x ", __reg_read(glamo, n));
328 end += sprintf(end, "\n");
334 spin_unlock(&glamo->lock);
339 static DEVICE_ATTR(regs, 0644, regs_read, regs_write);
340 static struct attribute *glamo_sysfs_entries[] = {
344 static struct attribute_group glamo_attr_group = {
346 .attrs = glamo_sysfs_entries,
351 /***********************************************************************
353 ***********************************************************************/
355 int __glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
358 case GLAMO_ENGINE_LCD:
359 __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
360 GLAMO_HOSTBUS2_MMIO_EN_LCD,
361 GLAMO_HOSTBUS2_MMIO_EN_LCD);
362 __reg_write(glamo, GLAMO_REG_CLOCK_LCD,
363 GLAMO_CLOCK_LCD_EN_M5CLK |
364 GLAMO_CLOCK_LCD_EN_DHCLK |
365 GLAMO_CLOCK_LCD_EN_DMCLK |
366 GLAMO_CLOCK_LCD_EN_DCLK |
367 GLAMO_CLOCK_LCD_DG_M5CLK |
368 GLAMO_CLOCK_LCD_DG_DMCLK);
369 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
370 GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
371 GLAMO_CLOCK_GEN51_EN_DIV_DMCLK |
372 GLAMO_CLOCK_GEN51_EN_DIV_DCLK, 0xffff);
374 case GLAMO_ENGINE_MMC:
375 __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
376 GLAMO_HOSTBUS2_MMIO_EN_MMC,
377 GLAMO_HOSTBUS2_MMIO_EN_MMC);
378 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MMC,
379 GLAMO_CLOCK_MMC_EN_M9CLK |
380 GLAMO_CLOCK_MMC_EN_TCLK |
381 GLAMO_CLOCK_MMC_DG_M9CLK |
382 GLAMO_CLOCK_MMC_DG_TCLK,
384 /* enable the TCLK divider clk input */
385 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
386 GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
387 GLAMO_CLOCK_GEN51_EN_DIV_TCLK);
389 case GLAMO_ENGINE_2D:
390 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
391 GLAMO_CLOCK_2D_EN_M7CLK |
392 GLAMO_CLOCK_2D_EN_GCLK |
393 GLAMO_CLOCK_2D_DG_M7CLK |
394 GLAMO_CLOCK_2D_DG_GCLK, 0xffff);
395 __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
396 GLAMO_HOSTBUS2_MMIO_EN_2D,
397 GLAMO_HOSTBUS2_MMIO_EN_2D);
398 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
399 GLAMO_CLOCK_GEN51_EN_DIV_GCLK,
402 case GLAMO_ENGINE_CMDQ:
403 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
404 GLAMO_CLOCK_2D_EN_M6CLK, 0xffff);
405 __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
406 GLAMO_HOSTBUS2_MMIO_EN_CQ,
407 GLAMO_HOSTBUS2_MMIO_EN_CQ);
408 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
409 GLAMO_CLOCK_GEN51_EN_DIV_MCLK,
412 /* FIXME: Implementation */
417 glamo->engine_enabled_bitfield |= 1 << engine;
422 int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
426 spin_lock(&glamo->lock);
428 ret = __glamo_engine_enable(glamo, engine);
430 spin_unlock(&glamo->lock);
434 EXPORT_SYMBOL_GPL(glamo_engine_enable);
436 int __glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
439 case GLAMO_ENGINE_LCD:
440 /* remove pixel clock to LCM */
441 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD,
442 GLAMO_CLOCK_LCD_EN_DCLK, 0);
443 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD,
444 GLAMO_CLOCK_LCD_EN_DHCLK |
445 GLAMO_CLOCK_LCD_EN_DMCLK, 0);
446 /* kill memory clock */
447 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD,
448 GLAMO_CLOCK_LCD_EN_M5CLK, 0);
449 /* stop dividing the clocks */
450 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
451 GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
452 GLAMO_CLOCK_GEN51_EN_DIV_DMCLK |
453 GLAMO_CLOCK_GEN51_EN_DIV_DCLK, 0);
456 case GLAMO_ENGINE_MMC:
457 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MMC,
458 GLAMO_CLOCK_MMC_EN_M9CLK |
459 GLAMO_CLOCK_MMC_EN_TCLK |
460 GLAMO_CLOCK_MMC_DG_M9CLK |
461 GLAMO_CLOCK_MMC_DG_TCLK, 0);
462 /* disable the TCLK divider clk input */
463 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
464 GLAMO_CLOCK_GEN51_EN_DIV_TCLK, 0);
466 case GLAMO_ENGINE_CMDQ:
467 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
468 GLAMO_CLOCK_2D_EN_M6CLK,
470 __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
471 GLAMO_HOSTBUS2_MMIO_EN_CQ,
472 GLAMO_HOSTBUS2_MMIO_EN_CQ);
473 /* __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
474 GLAMO_CLOCK_GEN51_EN_DIV_MCLK,
477 case GLAMO_ENGINE_2D:
478 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
479 GLAMO_CLOCK_2D_EN_M7CLK |
480 GLAMO_CLOCK_2D_EN_GCLK |
481 GLAMO_CLOCK_2D_DG_M7CLK |
482 GLAMO_CLOCK_2D_DG_GCLK,
484 __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2),
485 GLAMO_HOSTBUS2_MMIO_EN_2D,
486 GLAMO_HOSTBUS2_MMIO_EN_2D);
487 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1,
488 GLAMO_CLOCK_GEN51_EN_DIV_GCLK,
495 glamo->engine_enabled_bitfield &= ~(1 << engine);
499 int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
503 spin_lock(&glamo->lock);
505 ret = __glamo_engine_disable(glamo, engine);
507 spin_unlock(&glamo->lock);
511 EXPORT_SYMBOL_GPL(glamo_engine_disable);
513 static const u_int16_t engine_clock_regs[__NUM_GLAMO_ENGINES] = {
514 [GLAMO_ENGINE_LCD] = GLAMO_REG_CLOCK_LCD,
515 [GLAMO_ENGINE_MMC] = GLAMO_REG_CLOCK_MMC,
516 [GLAMO_ENGINE_ISP] = GLAMO_REG_CLOCK_ISP,
517 [GLAMO_ENGINE_JPEG] = GLAMO_REG_CLOCK_JPEG,
518 [GLAMO_ENGINE_3D] = GLAMO_REG_CLOCK_3D,
519 [GLAMO_ENGINE_2D] = GLAMO_REG_CLOCK_2D,
520 [GLAMO_ENGINE_MPEG_ENC] = GLAMO_REG_CLOCK_MPEG,
521 [GLAMO_ENGINE_MPEG_DEC] = GLAMO_REG_CLOCK_MPEG,
524 void glamo_engine_clkreg_set(struct glamo_core *glamo,
525 enum glamo_engine engine,
526 u_int16_t mask, u_int16_t val)
528 reg_set_bit_mask(glamo, engine_clock_regs[engine], mask, val);
530 EXPORT_SYMBOL_GPL(glamo_engine_clkreg_set);
532 u_int16_t glamo_engine_clkreg_get(struct glamo_core *glamo,
533 enum glamo_engine engine)
537 spin_lock(&glamo->lock);
538 val = __reg_read(glamo, engine_clock_regs[engine]);
539 spin_unlock(&glamo->lock);
543 EXPORT_SYMBOL_GPL(glamo_engine_clkreg_get);
545 static const struct glamo_script engine_div_regs[__NUM_GLAMO_ENGINES] = {
546 [GLAMO_ENGINE_LCD] = {GLAMO_REG_CLOCK_GEN5_1, GLAMO_CLOCK_GEN51_EN_DIV_DCLK},
547 [GLAMO_ENGINE_MMC] = {GLAMO_REG_CLOCK_GEN5_1, GLAMO_CLOCK_GEN51_EN_DIV_TCLK},
548 [GLAMO_ENGINE_2D] = {GLAMO_REG_CLOCK_GEN5_1, GLAMO_CLOCK_GEN51_EN_DIV_GCLK},
551 void glamo_engine_div_enable(struct glamo_core *glamo, enum glamo_engine engine)
553 uint16_t reg = engine_div_regs[engine].reg;
554 uint16_t bit = engine_div_regs[engine].val;
557 spin_lock(&glamo->lock);
558 val = __reg_read(glamo, reg);
559 __reg_write(glamo, reg, val | bit);
560 spin_unlock(&glamo->lock);
563 EXPORT_SYMBOL_GPL(glamo_engine_div_enable);
565 void glamo_engine_div_disable(struct glamo_core *glamo, enum glamo_engine engine)
567 uint16_t reg = engine_div_regs[engine].reg;
568 uint16_t bit = engine_div_regs[engine].val;
571 spin_lock(&glamo->lock);
572 val = __reg_read(glamo, reg);
573 __reg_write(glamo, reg, val & ~bit);
574 spin_unlock(&glamo->lock);
576 EXPORT_SYMBOL_GPL(glamo_engine_div_disable);
578 static const struct glamo_script reset_regs[] = {
579 [GLAMO_ENGINE_LCD] = {
580 GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET
583 [GLAMO_ENGINE_HOST] = {
584 GLAMO_REG_CLOCK_HOST, GLAMO_CLOCK_HOST_RESET
586 [GLAMO_ENGINE_MEM] = {
587 GLAMO_REG_CLOCK_MEM, GLAMO_CLOCK_MEM_RESET
590 [GLAMO_ENGINE_MMC] = {
591 GLAMO_REG_CLOCK_MMC, GLAMO_CLOCK_MMC_RESET
593 [GLAMO_ENGINE_CMDQ] = {
594 GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_CQ_RESET
596 [GLAMO_ENGINE_2D] = {
597 GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_RESET
599 [GLAMO_ENGINE_JPEG] = {
600 GLAMO_REG_CLOCK_JPEG, GLAMO_CLOCK_JPEG_RESET
604 void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
606 uint16_t reg = reset_regs[engine].reg;
607 uint16_t val = reset_regs[engine].val;
609 if (engine >= ARRAY_SIZE(reset_regs)) {
610 dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine);
615 spin_lock(&glamo->lock);
616 __reg_set_bit(glamo, reg, val);
617 __reg_clear_bit(glamo, reg, val);
618 spin_unlock(&glamo->lock);
620 EXPORT_SYMBOL_GPL(glamo_engine_reset);
622 int glamo_pll_rate(struct glamo_core *glamo,
626 unsigned int osci = glamo->pdata->osci_clock_rate;
630 reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1);
633 reg = __reg_read(glamo, GLAMO_REG_PLL_GEN3);
640 EXPORT_SYMBOL_GPL(glamo_pll_rate);
642 int glamo_engine_reclock(struct glamo_core *glamo,
643 enum glamo_engine engine,
647 u_int16_t reg, mask, div;
653 case GLAMO_ENGINE_LCD:
655 reg = GLAMO_REG_CLOCK_GEN7;
658 case GLAMO_ENGINE_MMC:
660 reg = GLAMO_REG_CLOCK_GEN8;
664 dev_warn(&glamo->pdev->dev,
665 "reclock of engine 0x%x not supported\n", engine);
670 pll = glamo_pll_rate(glamo, pll);
674 if (div != 0 && pll / div <= hz)
680 dev_dbg(&glamo->pdev->dev,
681 "PLL %d, kHZ %d, div %d\n", pll, hz / 1000, div);
683 reg_set_bit_mask(glamo, reg, mask, div);
684 mdelay(5); /* wait some time to stabilize */
686 return pll / (div + 1);
688 EXPORT_SYMBOL_GPL(glamo_engine_reclock);
690 /***********************************************************************
692 ***********************************************************************/
694 int glamo_run_script(struct glamo_core *glamo, const struct glamo_script *script,
695 int len, int may_sleep)
698 const struct glamo_script *line = script;
700 for (i = 0; i < len; ++i, ++line) {
708 mdelay(line->val * 4);
711 /* spin until PLLs lock */
712 while ((__reg_read(glamo, GLAMO_REG_PLL_GEN5) & 3) != 3)
717 * couple of people reported artefacts with 2.6.28 changes, this
718 * allows reversion to 2.6.24 settings
722 switch (slow_memory) {
723 /* choice 1 is the most conservative */
724 case 1: /* 3 waits on Async BB R & W, Use PLL 1 for mem bus */
725 __reg_write(glamo, script[i].reg, 0xef0);
727 case 2: /* 2 waits on Async BB R & W, Use PLL 1 for mem bus */
728 __reg_write(glamo, script[i].reg, 0xea0);
730 case 3: /* 1 waits on Async BB R & W, Use PLL 1 for mem bus */
731 __reg_write(glamo, script[i].reg, 0xe50);
733 case 4: /* 0 waits on Async BB R & W, Use PLL 1 for mem bus */
734 __reg_write(glamo, script[i].reg, 0xe00);
737 /* using PLL2 for memory bus increases CPU bandwidth significantly */
738 case 5: /* 3 waits on Async BB R & W, Use PLL 2 for mem bus */
739 __reg_write(glamo, script[i].reg, 0xef3);
741 case 6: /* 2 waits on Async BB R & W, Use PLL 2 for mem bus */
742 __reg_write(glamo, script[i].reg, 0xea3);
744 case 7: /* 1 waits on Async BB R & W, Use PLL 2 for mem bus */
745 __reg_write(glamo, script[i].reg, 0xe53);
747 /* default of 0 or >7 is fastest */
748 default: /* 0 waits on Async BB R & W, Use PLL 2 for mem bus */
749 __reg_write(glamo, script[i].reg, 0xe03);
755 __reg_write(glamo, script[i].reg, script[i].val);
762 EXPORT_SYMBOL(glamo_run_script);
764 static const struct glamo_script glamo_init_script[] = {
765 { GLAMO_REG_CLOCK_HOST, 0x1000 },
767 { GLAMO_REG_CLOCK_MEMORY, 0x1000 },
768 { GLAMO_REG_CLOCK_MEMORY, 0x2000 },
769 { GLAMO_REG_CLOCK_LCD, 0x1000 },
770 { GLAMO_REG_CLOCK_MMC, 0x1000 },
771 { GLAMO_REG_CLOCK_ISP, 0x1000 },
772 { GLAMO_REG_CLOCK_ISP, 0x3000 },
773 { GLAMO_REG_CLOCK_JPEG, 0x1000 },
774 { GLAMO_REG_CLOCK_3D, 0x1000 },
775 { GLAMO_REG_CLOCK_3D, 0x3000 },
776 { GLAMO_REG_CLOCK_2D, 0x1000 },
777 { GLAMO_REG_CLOCK_2D, 0x3000 },
778 { GLAMO_REG_CLOCK_RISC1, 0x1000 },
779 { GLAMO_REG_CLOCK_MPEG, 0x3000 },
780 { GLAMO_REG_CLOCK_MPEG, 0x3000 },
781 { GLAMO_REG_CLOCK_MPROC, 0x1000 /*0x100f*/ },
783 { GLAMO_REG_CLOCK_HOST, 0x0000 },
784 { GLAMO_REG_CLOCK_MEMORY, 0x0000 },
785 { GLAMO_REG_CLOCK_LCD, 0x0000 },
786 { GLAMO_REG_CLOCK_MMC, 0x0000 },
788 /* unused engines must be left in reset to stop MMC block read "blackouts" */
789 { GLAMO_REG_CLOCK_ISP, 0x0000 },
790 { GLAMO_REG_CLOCK_ISP, 0x0000 },
791 { GLAMO_REG_CLOCK_JPEG, 0x0000 },
792 { GLAMO_REG_CLOCK_3D, 0x0000 },
793 { GLAMO_REG_CLOCK_3D, 0x0000 },
794 { GLAMO_REG_CLOCK_2D, 0x0000 },
795 { GLAMO_REG_CLOCK_2D, 0x0000 },
796 { GLAMO_REG_CLOCK_RISC1, 0x0000 },
797 { GLAMO_REG_CLOCK_MPEG, 0x0000 },
798 { GLAMO_REG_CLOCK_MPEG, 0x0000 },
800 { GLAMO_REG_PLL_GEN1, 0x05db }, /* 48MHz */
801 { GLAMO_REG_PLL_GEN3, 0x0aba }, /* 90MHz */
804 * b9 of this register MUST be zero to get any interrupts on INT#
805 * the other set bits enable all the engine interrupt sources
807 { GLAMO_REG_IRQ_ENABLE, 0x01ff },
808 { GLAMO_REG_CLOCK_GEN6, 0x2000 },
809 { GLAMO_REG_CLOCK_GEN7, 0x0101 },
810 { GLAMO_REG_CLOCK_GEN8, 0x0100 },
811 { GLAMO_REG_CLOCK_HOST, 0x000d },
813 * b7..b4 = 0 = no wait states on read or write
814 * b0 = 1 select PLL2 for Host interface, b1 = enable it
816 { 0x200, 0x0e03 /* this is replaced by script parser */ },
822 /* S-Media recommended "set tiling mode to 512 mode for memory access
823 * more efficiency when 640x480" */
824 { GLAMO_REG_MEM_TYPE, 0x0c74 }, /* 8MB, 16 word pg wr+rd */
825 { GLAMO_REG_MEM_GEN, 0xafaf }, /* 63 grants min + max */
827 { GLAMO_REGOFS_HOSTBUS + 2, 0xffff }, /* enable on MMIO*/
829 { GLAMO_REG_MEM_TIMING1, 0x0108 },
830 { GLAMO_REG_MEM_TIMING2, 0x0010 }, /* Taa = 3 MCLK */
831 { GLAMO_REG_MEM_TIMING3, 0x0000 },
832 { GLAMO_REG_MEM_TIMING4, 0x0000 }, /* CE1# delay fall/rise */
833 { GLAMO_REG_MEM_TIMING5, 0x0000 }, /* UB# LB# */
834 { GLAMO_REG_MEM_TIMING6, 0x0000 }, /* OE# */
835 { GLAMO_REG_MEM_TIMING7, 0x0000 }, /* WE# */
836 { GLAMO_REG_MEM_TIMING8, 0x1002 }, /* MCLK delay, was 0x1000 */
837 { GLAMO_REG_MEM_TIMING9, 0x6006 },
838 { GLAMO_REG_MEM_TIMING10, 0x00ff },
839 { GLAMO_REG_MEM_TIMING11, 0x0001 },
840 { GLAMO_REG_MEM_POWER1, 0x0020 },
841 { GLAMO_REG_MEM_POWER2, 0x0000 },
842 { GLAMO_REG_MEM_DRAM1, 0x0000 },
844 { GLAMO_REG_MEM_DRAM1, 0xc100 },
846 { GLAMO_REG_MEM_DRAM1, 0xe100 },
847 { GLAMO_REG_MEM_DRAM2, 0x01d6 },
848 { GLAMO_REG_CLOCK_MEMORY, 0x000b },
851 static struct glamo_script glamo_resume_script[] = {
853 { GLAMO_REG_PLL_GEN1, 0x05db }, /* 48MHz */
854 { GLAMO_REG_PLL_GEN3, 0x0aba }, /* 90MHz */
855 { GLAMO_REG_DFT_GEN6, 1 },
861 * b9 of this register MUST be zero to get any interrupts on INT#
862 * the other set bits enable all the engine interrupt sources
864 { GLAMO_REG_IRQ_ENABLE, 0x01ff },
865 { GLAMO_REG_CLOCK_HOST, 0x0018 },
866 { GLAMO_REG_CLOCK_GEN5_1, 0x18b1 },
868 { GLAMO_REG_MEM_DRAM1, 0x0000 },
870 { GLAMO_REG_MEM_DRAM1, 0xc100 },
872 { GLAMO_REG_MEM_DRAM1, 0xe100 },
873 { GLAMO_REG_MEM_DRAM2, 0x01d6 },
874 { GLAMO_REG_CLOCK_MEMORY, 0x000b },
883 static void glamo_power(struct glamo_core *glamo,
884 enum glamo_power new_state)
889 spin_lock_irqsave(&glamo->lock, flags);
891 dev_info(&glamo->pdev->dev, "***** glamo_power -> %d\n", new_state);
895 static const REG_VALUE_MASK_TYPE reg_powerOn[] =
897 { REG_GEN_DFT6, REG_BIT_ALL, REG_DATA(1u << 0) },
898 { REG_GEN_PLL3, 0u, REG_DATA(1u << 13) },
899 { REG_GEN_MEM_CLK, REG_BIT_ALL, REG_BIT_EN_MOCACLK },
900 { REG_MEM_DRAM2, 0u, REG_BIT_EN_DEEP_POWER_DOWN },
901 { REG_MEM_DRAM1, 0u, REG_BIT_SELF_REFRESH }
904 static const REG_VALUE_MASK_TYPE reg_powerStandby[] =
906 { REG_MEM_DRAM1, REG_BIT_ALL, REG_BIT_SELF_REFRESH },
907 { REG_GEN_MEM_CLK, 0u, REG_BIT_EN_MOCACLK },
908 { REG_GEN_PLL3, REG_BIT_ALL, REG_DATA(1u << 13) },
909 { REG_GEN_DFT5, REG_BIT_ALL, REG_DATA(1u << 0) }
912 static const REG_VALUE_MASK_TYPE reg_powerSuspend[] =
914 { REG_MEM_DRAM2, REG_BIT_ALL, REG_BIT_EN_DEEP_POWER_DOWN },
915 { REG_GEN_MEM_CLK, 0u, REG_BIT_EN_MOCACLK },
916 { REG_GEN_PLL3, REG_BIT_ALL, REG_DATA(1u << 13) },
917 { REG_GEN_DFT5, REG_BIT_ALL, REG_DATA(1u << 0) }
925 * glamo state on resume is nondeterministic in some
926 * fundamental way, it has also been observed that the
927 * Glamo reset pin can get asserted by, eg, touching it with
928 * a scope probe. So the only answer is to roll with it and
929 * force an external reset on the Glamo during resume.
932 (glamo->pdata->glamo_external_reset)(0);
934 (glamo->pdata->glamo_external_reset)(1);
937 glamo_run_script(glamo, glamo_init_script,
938 ARRAY_SIZE(glamo_init_script), 0);
942 case GLAMO_POWER_SUSPEND:
944 /* nuke interrupts */
945 __reg_write(glamo, GLAMO_REG_IRQ_ENABLE, 0x200);
947 /* stash a copy of which engines were running */
948 glamo->engine_enabled_bitfield_suspend =
949 glamo->engine_enabled_bitfield;
951 /* take down each engine before we kill mem and pll */
952 for (n = 0; n < __NUM_GLAMO_ENGINES; n++)
953 if (glamo->engine_enabled_bitfield & (1 << n))
954 __glamo_engine_disable(glamo, n);
956 /* enable self-refresh */
958 __reg_write(glamo, GLAMO_REG_MEM_DRAM1,
959 GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
960 GLAMO_MEM_DRAM1_EN_GATE_CKE |
961 GLAMO_MEM_DRAM1_SELF_REFRESH |
962 GLAMO_MEM_REFRESH_COUNT);
963 __reg_write(glamo, GLAMO_REG_MEM_DRAM1,
964 GLAMO_MEM_DRAM1_EN_MODEREG_SET |
965 GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
966 GLAMO_MEM_DRAM1_EN_GATE_CKE |
967 GLAMO_MEM_DRAM1_SELF_REFRESH |
968 GLAMO_MEM_REFRESH_COUNT);
970 /* force RAM into deep powerdown */
972 __reg_write(glamo, GLAMO_REG_MEM_DRAM2,
973 GLAMO_MEM_DRAM2_DEEP_PWRDOWN |
976 (1 << 2) | /* tRCD */
977 2); /* CAS latency */
979 /* disable clocks to memory */
980 __reg_write(glamo, GLAMO_REG_CLOCK_MEMORY, 0);
982 /* all dividers from OSCI */
983 __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, 0x400, 0x400);
985 /* PLL2 into bypass */
986 __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 12, 1 << 12);
988 __reg_write(glamo, 0x200, 0x0e00);
991 /* kill PLLS 1 then 2 */
992 __reg_write(glamo, GLAMO_REG_DFT_GEN5, 0x0001);
993 __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 13, 1 << 13);
998 spin_unlock_irqrestore(&glamo->lock, flags);
1002 #define MEMDETECT_RETRY 6
1003 static unsigned int detect_memsize(struct glamo_core *glamo)
1007 /*static const u_int16_t pattern[] = {
1008 0x1111, 0x8a8a, 0x2222, 0x7a7a,
1009 0x3333, 0x6a6a, 0x4444, 0x5a5a,
1010 0x5555, 0x4a4a, 0x6666, 0x3a3a,
1011 0x7777, 0x2a2a, 0x8888, 0x1a1a
1014 for (i = 0; i < MEMDETECT_RETRY; i++) {
1015 switch (glamo->type) {
1017 __reg_write(glamo, GLAMO_REG_MEM_TYPE, 0x0072);
1018 __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xc100);
1021 switch (glamo->revision) {
1022 case GLAMO_CORE_REV_A0:
1024 __reg_write(glamo, GLAMO_REG_MEM_TYPE,
1027 __reg_write(glamo, GLAMO_REG_MEM_TYPE,
1030 __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0x0000);
1032 __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xc100);
1036 __reg_write(glamo, GLAMO_REG_MEM_TYPE,
1039 __reg_write(glamo, GLAMO_REG_MEM_TYPE,
1042 __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0x0000);
1044 __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xe100);
1055 /* FIXME: finish implementation */
1056 for (j = 0; j < 8; j++) {
1065 /* Find out if we can support this version of the Glamo chip */
1066 static int glamo_supported(struct glamo_core *glamo)
1068 u_int16_t dev_id, rev_id; /*, memsize; */
1070 dev_id = __reg_read(glamo, GLAMO_REG_DEVICE_ID);
1071 rev_id = __reg_read(glamo, GLAMO_REG_REVISION_ID);
1076 case GLAMO_CORE_REV_A2:
1078 case GLAMO_CORE_REV_A0:
1079 case GLAMO_CORE_REV_A1:
1080 case GLAMO_CORE_REV_A3:
1081 dev_warn(&glamo->pdev->dev, "untested core revision "
1082 "%04x, your mileage may vary\n", rev_id);
1085 dev_warn(&glamo->pdev->dev, "unknown glamo revision "
1086 "%04x, your mileage may vary\n", rev_id);
1087 /* maybe should abort ? */
1093 dev_err(&glamo->pdev->dev, "unsupported Glamo device %04x\n",
1098 dev_dbg(&glamo->pdev->dev, "Detected Glamo core %04x Revision %04x "
1099 "(%uHz CPU / %uHz Memory)\n", dev_id, rev_id,
1100 glamo_pll_rate(glamo, GLAMO_PLL1),
1101 glamo_pll_rate(glamo, GLAMO_PLL2));
1106 static int __init glamo_probe(struct platform_device *pdev)
1109 struct glamo_core *glamo;
1111 glamo = kmalloc(GFP_KERNEL, sizeof(*glamo));
1115 spin_lock_init(&glamo->lock);
1117 glamo->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1118 glamo->irq = platform_get_irq(pdev, 0);
1119 glamo->pdata = pdev->dev.platform_data;
1120 if (!glamo->mem || !glamo->pdata) {
1121 dev_err(&pdev->dev, "platform device with no MEM/PDATA ?\n");
1126 /* register a number of sibling devices whoise IOMEM resources
1127 * are siblings of pdev's IOMEM resource */
1129 /* only remap the generic, hostbus and memory controller registers */
1130 glamo->base = ioremap(glamo->mem->start, 0x4000 /*GLAMO_REGOFS_VIDCAP*/);
1132 dev_err(&pdev->dev, "failed to ioremap() memory region\n");
1136 platform_set_drvdata(pdev, glamo);
1138 (glamo->pdata->glamo_external_reset)(0);
1140 (glamo->pdata->glamo_external_reset)(1);
1144 * finally set the mfd interrupts up
1145 * can't do them earlier or sibling probes blow up
1148 for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
1149 set_irq_chip_and_handler(irq, &glamo_irq_chip, handle_level_irq);
1150 set_irq_flags(irq, IRQF_VALID);
1151 set_irq_chip_data(irq, glamo);
1154 if (glamo->pdata->glamo_irq_is_wired &&
1155 !glamo->pdata->glamo_irq_is_wired()) {
1156 set_irq_chained_handler(glamo->irq, glamo_irq_demux_handler);
1157 set_irq_type(glamo->irq, IRQ_TYPE_EDGE_FALLING);
1158 set_irq_chip_data(glamo->irq, glamo);
1159 dev_info(&pdev->dev, "Glamo interrupt registered\n");
1160 glamo->irq_works = 1;
1162 dev_err(&pdev->dev, "Glamo interrupt not used\n");
1163 glamo->irq_works = 0;
1166 /* confirm it isn't insane version */
1167 if (!glamo_supported(glamo)) {
1168 dev_err(&pdev->dev, "This Glamo is not supported\n");
1173 rc = sysfs_create_group(&pdev->dev.kobj, &glamo_attr_group);
1175 dev_err(&pdev->dev, "cannot create sysfs group\n");
1179 /* init the chip with canned register set */
1181 dev_dbg(&glamo->pdev->dev, "running init script\n");
1182 glamo_run_script(glamo, glamo_init_script,
1183 ARRAY_SIZE(glamo_init_script), 1);
1185 dev_info(&glamo->pdev->dev, "Glamo core PLL1: %uHz, PLL2: %uHz\n",
1186 glamo_pll_rate(glamo, GLAMO_PLL1),
1187 glamo_pll_rate(glamo, GLAMO_PLL2));
1189 mfd_add_devices(&pdev->dev, pdev->id, glamo_cells,
1190 ARRAY_SIZE(glamo_cells),
1193 /* only request the generic, hostbus and memory controller MMIO */
1194 glamo->mem = request_mem_region(glamo->mem->start,
1195 GLAMO_REGOFS_VIDCAP, "glamo-core");
1197 dev_err(&pdev->dev, "failed to request memory region\n");
1204 disable_irq(glamo->irq);
1205 set_irq_chained_handler(glamo->irq, NULL);
1206 set_irq_chip_data(glamo->irq, NULL);
1208 for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
1209 set_irq_flags(irq, 0);
1210 set_irq_chip(irq, NULL);
1211 set_irq_chip_data(irq, NULL);
1214 iounmap(glamo->base);
1216 platform_set_drvdata(pdev, NULL);
1222 static int glamo_remove(struct platform_device *pdev)
1224 struct glamo_core *glamo = platform_get_drvdata(pdev);
1227 disable_irq(glamo->irq);
1228 set_irq_chained_handler(glamo->irq, NULL);
1229 set_irq_chip_data(glamo->irq, NULL);
1231 for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) {
1232 set_irq_flags(irq, 0);
1233 set_irq_chip(irq, NULL);
1234 set_irq_chip_data(irq, NULL);
1237 platform_set_drvdata(pdev, NULL);
1238 mfd_remove_devices(&pdev->dev);
1239 iounmap(glamo->base);
1240 release_mem_region(glamo->mem->start, GLAMO_REGOFS_VIDCAP);
1248 static int glamo_suspend(struct device *dev)
1250 struct glamo_core *glamo = dev_get_drvdata(dev);
1251 glamo->suspending = 1;
1252 glamo_power(glamo, GLAMO_POWER_SUSPEND);
1257 static int glamo_resume(struct device *dev)
1259 struct glamo_core *glamo = dev_get_drvdata(dev);
1260 glamo_power(glamo, GLAMO_POWER_ON);
1261 glamo->suspending = 0;
1265 static struct dev_pm_ops glamo_pm_ops = {
1266 .suspend = glamo_suspend,
1267 .resume = glamo_resume,
1270 #define GLAMO_PM_OPS (&glamo_pm_ops)
1273 #define GLAMO_PM_OPS NULL
1276 static struct platform_driver glamo_driver = {
1277 .probe = glamo_probe,
1278 .remove = glamo_remove,
1280 .name = "glamo3362",
1281 .owner = THIS_MODULE,
1286 static int __devinit glamo_init(void)
1288 return platform_driver_register(&glamo_driver);
1291 static void __exit glamo_cleanup(void)
1293 platform_driver_unregister(&glamo_driver);
1296 module_init(glamo_init);
1297 module_exit(glamo_cleanup);
1299 MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
1300 MODULE_DESCRIPTION("Smedia Glamo 336x/337x core/resource driver");
1301 MODULE_LICENSE("GPL");