target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c

   1 /*
   2  * linux/arch/arm/mach-s3c2442/mach-gta02.c
   3  *
   4  * S3C2442 Machine Support for the Openmoko Freerunner (GTA02)
   5  *
   6  * Copyright (C) 2006-2007 by Openmoko, Inc.
   7  * Author: Harald Welte <laforge@openmoko.org>
   8  * All rights reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  *
  25  */
  26
  27 #include <linux/kernel.h>
  28 #include <linux/types.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/list.h>
  31 #include <linux/delay.h>
  32 #include <linux/timer.h>
  33 #include <linux/init.h>
  34 #include <linux/workqueue.h>
  35 #include <linux/platform_device.h>
  36 #include <linux/serial_core.h>
  37 #include <linux/spi/spi.h>
  38 #include <linux/spi/spi_bitbang.h>
  39 #include <linux/mmc/host.h>
  40
  41 #include <linux/mtd/mtd.h>
  42 #include <linux/mtd/nand.h>
  43 #include <linux/mtd/nand_ecc.h>
  44 #include <linux/mtd/partitions.h>
  45 #include <linux/mtd/physmap.h>
  46
  47 #include <linux/i2c.h>
  48 #include <linux/backlight.h>
  49 #include <linux/regulator/machine.h>
  50
  51 #include <linux/mfd/pcf50633/core.h>
  52 #include <linux/mfd/pcf50633/mbc.h>
  53 #include <linux/mfd/pcf50633/adc.h>
  54 #include <linux/mfd/pcf50633/gpio.h>
  55 #include <linux/mfd/pcf50633/pmic.h>
  56
  57 #include <linux/lis302dl.h>
  58
  59 #include <asm/mach/arch.h>
  60 #include <asm/mach/map.h>
  61 #include <asm/mach/irq.h>
  62
  63 #include <mach/hardware.h>
  64 #include <mach/io.h>
  65 #include <asm/irq.h>
  66 #include <asm/mach-types.h>
  67
  68 #include <mach/regs-irq.h>
  69 #include <mach/regs-gpio.h>
  70 #include <mach/regs-gpioj.h>
  71 #include <mach/fb.h>
  72 #include <mach/mci.h>
  73 #include <mach/ts.h>
  74 #include <mach/spi.h>
  75 #include <mach/spi-gpio.h>
  76 #include <mach/regs-mem.h>
  77 #include <mach/spi-gpio.h>
  78 #include <plat/pwm.h>
  79 #include <mach/cpu.h>
  80
  81 #include <mach/gta02.h>
  82
  83 #include <plat/regs-serial.h>
  84 #include <plat/nand.h>
  85 #include <plat/devs.h>
  86 #include <plat/cpu.h>
  87 #include <plat/pm.h>
  88 #include <plat/udc.h>
  89 #include <plat/iic.h>
  90 #include <plat/usb-control.h>
  91 #include <plat/regs-timer.h>
  92
  93 #include <mach/gta02-pm-gsm.h>
  94 #include <mach/gta02-pm-gps.h>
  95 #include <mach/gta02-pm-wlan.h>
  96
  97 #include <linux/jbt6k74.h>
  98 #include <linux/glamofb.h>
  99 #include <linux/mfd/glamo.h>
 100 #include <linux/spi/glamo.h>
 101
 102 #include <linux/hdq.h>
 103 #include <linux/bq27000_battery.h>
 104
 105 #include <linux/touchscreen/ts_filter_chain.h>
 106 #ifdef CONFIG_TOUCHSCREEN_FILTER
 107 #include <linux/touchscreen/ts_filter_linear.h>
 108 #include <linux/touchscreen/ts_filter_mean.h>
 109 #include <linux/touchscreen/ts_filter_median.h>
 110 #include <linux/touchscreen/ts_filter_group.h>
 111 #endif
 112
 113 #include <asm/fiq.h>
 114
 115 #include <linux/gta02-vibrator.h>
 116 #include <linux/gta02-shadow.h>
 117
 118 /* arbitrates which sensor IRQ owns the shared SPI bus */
 119 static spinlock_t motion_irq_lock;
 120
 121
 122 /* -------------------------------------------------------------------------------
 123  * GTA02 FIQ related
 124  *
 125  * Calls into vibrator and hdq and based on the return values
 126  * determines if we the FIQ source be kept alive
 127  */
 128
 129 #define DIVISOR_FROM_US(x) ((x) << 3)
 130
 131 #ifdef CONFIG_HDQ_GPIO_BITBANG
 132 #define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
 133 extern int hdq_fiq_handler(void);
 134 #endif
 135
 136 #ifdef CONFIG_LEDS_GTA02_VIBRATOR
 137 #define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100)
 138 extern int gta02_vibrator_fiq_handler(void);
 139 #endif
 140
 141 #if defined(CONFIG_LEDS_GTA02_VIBRATOR) || defined(CONFIG_HDQ_GPIO_BITBANG)
 142
 143 /* Global data related to our fiq source */
 144 static u32 gta02_fiq_ack_mask;
 145 static struct s3c2410_pwm gta02_fiq_pwm_timer;
 146 static u16 gta02_fiq_timer_index;
 147 static int gta02_fiq_irq;
 148
 149 static void gta02_fiq_handler(void)
 150 {
 151         u16 divisor = 0xffff;
 152
 153         /* Vibrator servicing */
 154
 155         /* disable further timer interrupts if nobody has any work
 156          * or adjust rate according to who still has work
 157          *
 158          * CAUTION: it means forground code must disable FIQ around
 159          * its own non-atomic S3C2410_INTMSK changes... not common
 160          * thankfully and taken care of by the fiq-basis patch
 161          */
 162
 163 #ifdef CONFIG_LEDS_GTA02_VIBRATOR
 164         if (gta02_vibrator_fiq_handler())
 165                 divisor = FIQ_DIVISOR_VIBRATOR;
 166 #endif
 167
 168 #ifdef CONFIG_HDQ_GPIO_BITBANG
 169         if (hdq_fiq_handler())
 170                 divisor = FIQ_DIVISOR_HDQ;
 171 #endif
 172
 173         if (divisor == 0xffff) /* mask the fiq irq source */
 174                 __raw_writel(__raw_readl(S3C2410_INTMSK) | gta02_fiq_ack_mask,
 175                              S3C2410_INTMSK);
 176         else /* still working, maybe at a different rate */
 177                 __raw_writel(divisor, S3C2410_TCNTB(gta02_fiq_timer_index));
 178
 179         __raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND);
 180 }
 181
 182 static void gta02_fiq_kick(void)
 183 {
 184         unsigned long flags;
 185         u32 tcon;
 186
 187         /* we have to take care about FIQ because this modification is
 188          * non-atomic, FIQ could come in after the read and before the
 189          * writeback and its changes to the register would be lost
 190          * (platform INTMSK mod code is taken care of already)
 191          */
 192         local_save_flags(flags);
 193         local_fiq_disable();
 194         /* allow FIQs to resume */
 195         __raw_writel(__raw_readl(S3C2410_INTMSK) &
 196                      ~(1 << (gta02_fiq_irq - S3C2410_CPUIRQ_OFFSET)),
 197                      S3C2410_INTMSK);
 198         tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START;
 199         /* fake the timer to a count of 1 */
 200         __raw_writel(1, S3C2410_TCNTB(gta02_fiq_timer_index));
 201         __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON);
 202         __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START,
 203                      S3C2410_TCON);
 204         __raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON);
 205         local_irq_restore(flags);
 206 }
 207
 208 static int gta02_fiq_enable(void)
 209 {
 210         int irq_index_fiq = IRQ_TIMER3;
 211         int rc = 0;
 212
 213         local_fiq_disable();
 214
 215         gta02_fiq_irq = irq_index_fiq;
 216         gta02_fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET);
 217         gta02_fiq_timer_index = (irq_index_fiq - IRQ_TIMER0);
 218
 219         /* set up the timer to operate as a pwm device */
 220
 221         rc = s3c2410_pwm_init(&gta02_fiq_pwm_timer);
 222         if (rc)
 223                 goto bail;
 224
 225         gta02_fiq_pwm_timer.timerid = PWM0 + gta02_fiq_timer_index;
 226         gta02_fiq_pwm_timer.prescaler = (6 - 1) / 2;
 227         gta02_fiq_pwm_timer.divider = S3C2410_TCFG1_MUX3_DIV2;
 228         /* default rate == ~32us */
 229         gta02_fiq_pwm_timer.counter = gta02_fiq_pwm_timer.comparer = 3000;
 230
 231         rc = s3c2410_pwm_enable(&gta02_fiq_pwm_timer);
 232         if (rc)
 233                 goto bail;
 234
 235         s3c2410_pwm_start(&gta02_fiq_pwm_timer);
 236
 237         /* let our selected interrupt be a magic FIQ interrupt */
 238         __raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD);
 239
 240         /* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */
 241         local_fiq_enable();
 242
 243         set_fiq_c_handler(gta02_fiq_handler);
 244
 245         return 0;
 246
 247 bail:
 248         printk(KERN_ERR "Could not initialize FIQ for GTA02: %d\n", rc);
 249
 250         return rc;
 251 }
 252
 253 static void gta02_fiq_disable(void)
 254 {
 255         __raw_writel(0, S3C2410_INTMOD);
 256         local_fiq_disable();
 257         gta02_fiq_irq = 0; /* no active source interrupt now either */
 258
 259 }
 260 /* -------------------- /GTA02 FIQ Handler ------------------------------------- */
 261
 262 #endif
 263
 264 /*
 265  * this gets called every 1ms when we paniced.
 266  */
 267
 268 static long gta02_panic_blink(long count)
 269 {
 270         long delay = 0;
 271         static long last_blink;
 272         static char led;
 273
 274         if (count - last_blink < 100) /* 200ms period, fast blink */
 275                 return 0;
 276
 277         led ^= 1;
 278         s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT);
 279         gta02_gpb_setpin(GTA02_GPIO_AUX_LED, led);
 280
 281         last_blink = count;
 282         return delay;
 283 }
 284
 285
 286 /**
 287  * returns PCB revision information in b9,b8 and b2,b1,b0
 288  * Pre-GTA02 A6 returns 0x000
 289  *     GTA02 A6 returns 0x101
 290  *     ...
 291  */
 292
 293 int gta02_get_pcb_revision(void)
 294 {
 295         int n;
 296         int u = 0;
 297         static unsigned long pinlist[] = {
 298                 GTA02_PCB_ID1_0,
 299                 GTA02_PCB_ID1_1,
 300                 GTA02_PCB_ID1_2,
 301                 GTA02_PCB_ID2_0,
 302                 GTA02_PCB_ID2_1,
 303         };
 304         static int pin_offset[] = {
 305                 0, 1, 2, 8, 9
 306         };
 307
 308         for (n = 0 ; n < ARRAY_SIZE(pinlist); n++) {
 309                 /*
 310                  * set the PCB version GPIO to be pulled-down input
 311                  * force low briefly first
 312                  */
 313                 s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
 314                 s3c2410_gpio_setpin(pinlist[n], 0);
 315                 /* misnomer: it is a pullDOWN in 2442 */
 316                 s3c2410_gpio_pullup(pinlist[n], 1);
 317                 s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_INPUT);
 318
 319                 udelay(10);
 320
 321                 if (s3c2410_gpio_getpin(pinlist[n]))
 322                         u |= 1 << pin_offset[n];
 323
 324                 /*
 325                 * when not being interrogated, all of the revision GPIO
 326                 * are set to output HIGH without pulldown so no current flows
 327                 * if they are NC or pulled up.
 328                 */
 329                 s3c2410_gpio_setpin(pinlist[n], 1);
 330                 s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
 331                 /* misnomer: it is a pullDOWN in 2442 */
 332                 s3c2410_gpio_pullup(pinlist[n], 0);
 333         }
 334
 335         return u;
 336 }
 337
 338 struct platform_device gta02_resume_reason_device = {
 339         .name           = "gta02-resume",
 340         .num_resources  = 0,
 341 };
 342
 343 static struct map_desc gta02_iodesc[] __initdata = {
 344         {
 345                 .virtual        = 0xe0000000,
 346                 .pfn            = __phys_to_pfn(S3C2410_CS3+0x01000000),
 347                 .length         = SZ_1M,
 348                 .type           = MT_DEVICE
 349         },
 350 };
 351
 352 #define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
 353 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 354 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
 355
 356 static struct s3c2410_uartcfg gta02_uartcfgs[] = {
 357         [0] = {
 358                 .hwport      = 0,
 359                 .flags       = 0,
 360                 .ucon        = UCON,
 361                 .ulcon       = ULCON,
 362                 .ufcon       = UFCON,
 363         },
 364         [1] = {
 365                 .hwport      = 1,
 366                 .flags       = 0,
 367                 .ucon        = UCON,
 368                 .ulcon       = ULCON,
 369                 .ufcon       = UFCON,
 370         },
 371         [2] = {
 372                 .hwport      = 2,
 373                 .flags       = 0,
 374                 .ucon        = UCON,
 375                 .ulcon       = ULCON,
 376                 .ufcon       = UFCON,
 377         },
 378
 379 };
 380
 381 struct pcf50633 *gta02_pcf;
 382
 383 #ifdef CONFIG_CHARGER_PCF50633
 384 #ifdef CONFIG_HDQ_GPIO_BITBANG
 385 static int gta02_get_charger_online_status(void)
 386 {
 387         struct pcf50633 *pcf = gta02_pcf;
 388
 389         return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
 390 }
 391
 392 static int gta02_get_charger_active_status(void)
 393 {
 394         struct pcf50633 *pcf = gta02_pcf;
 395
 396         return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
 397 }
 398 #endif
 399
 400 #define ADC_NOM_CHG_DETECT_1A 6
 401 #define ADC_NOM_CHG_DETECT_USB 43
 402
 403 static void
 404 gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
 405 {
 406         int  ma;
 407
 408         /* Interpret charger type */
 409         if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
 410
 411                 /* Stop GPO driving out now that we have a IA charger */
 412                 pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
 413
 414                 ma = 1000;
 415         } else
 416                 ma = 100;
 417
 418         pcf50633_mbc_usb_curlim_set(pcf, ma);
 419 }
 420
 421 static struct delayed_work gta02_charger_work;
 422 static int gta02_usb_vbus_draw;
 423
 424 static void gta02_charger_worker(struct work_struct *work)
 425 {
 426         struct pcf50633 *pcf = gta02_pcf;
 427
 428         if (gta02_usb_vbus_draw) {
 429                 pcf50633_mbc_usb_curlim_set(pcf, gta02_usb_vbus_draw);
 430                 return;
 431         } else {
 432 #ifdef CONFIG_PCF50633_ADC
 433                 pcf50633_adc_async_read(pcf,
 434                         PCF50633_ADCC1_MUX_ADCIN1,
 435                         PCF50633_ADCC1_AVERAGE_16,
 436                         gta02_configure_pmu_for_charger, NULL);
 437 #else
 438                 /* If the PCF50633 ADC is disabled we fallback to a 100mA limit for safety. */
 439                 pcf50633_mbc_usb_curlim_set(pcf, 100);
 440 #endif
 441                 return;
 442         }
 443 }
 444
 445 #define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
 446 static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
 447 {
 448         if (irq == PCF50633_IRQ_USBINS) {
 449                 schedule_delayed_work(&gta02_charger_work,
 450                                 GTA02_CHARGER_CONFIGURE_TIMEOUT);
 451                 return;
 452         } else if (irq == PCF50633_IRQ_USBREM) {
 453                 cancel_delayed_work_sync(&gta02_charger_work);
 454                 gta02_usb_vbus_draw = 0;
 455         }
 456 }
 457
 458 static void gta02_pmu_force_shutdown(struct pcf50633 *pcf)
 459 {
 460         pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_OOCSHDWN,
 461                         PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
 462 }
 463
 464
 465 static void gta02_udc_vbus_draw(unsigned int ma)
 466 {
 467         if (!gta02_pcf)
 468                 return;
 469
 470         gta02_usb_vbus_draw = ma;
 471
 472         schedule_delayed_work(&gta02_charger_work,
 473                                 GTA02_CHARGER_CONFIGURE_TIMEOUT);
 474 }
 475
 476 static int gta02_udc_vbus_status(void)
 477 {
 478         struct pcf50633 *pcf = gta02_pcf;
 479         if (!gta02_pcf)
 480                 return -ENODEV;
 481
 482         return !!(pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE);
 483 }
 484
 485 #else /* !CONFIG_CHARGER_PCF50633 */
 486 #ifdef CONFIG_HDQ_GPIO_BITBANG
 487 #define gta02_get_charger_online_status NULL
 488 #define gta02_get_charger_active_status NULL
 489 #endif
 490 #define gta02_pmu_event_callback        NULL
 491 #define gta02_udc_vbus_draw             NULL
 492 #define gta02_udc_vbus_status           NULL
 493 #endif
 494
 495
 496 static struct platform_device gta02_pm_gps_dev = {
 497         .name           = "gta02-pm-gps",
 498 };
 499
 500 static struct platform_device gta02_pm_bt_dev = {
 501         .name           = "gta02-pm-bt",
 502 };
 503
 504 static struct platform_device gta02_pm_gsm_dev = {
 505         .name           = "gta02-pm-gsm",
 506 };
 507
 508 static struct platform_device gta02_pm_wlan_dev = {
 509         .name           = "gta02-pm-wlan",
 510 };
 511
 512 /* this is called when pc50633 is probed, unfortunately quite late in the
 513  * day since it is an I2C bus device.  Here we can belatedly define some
 514  * platform devices with the advantage that we can mark the pcf50633 as the
 515  * parent.  This makes them get suspended and resumed with their parent
 516  * the pcf50633 still around.
 517  */
 518
 519 static struct platform_device gta02_glamo_dev;
 520 static void mangle_glamo_res_by_system_rev(void);
 521
 522 static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
 523 static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id);
 524
 525 static struct regulator_consumer_supply ldo4_consumers[] = {
 526         {
 527                 .dev = &gta02_pm_bt_dev.dev,
 528                 .supply = "BT_3V2",
 529         },
 530 };
 531
 532 static struct regulator_consumer_supply ldo5_consumers[] = {
 533         {
 534                 .dev = &gta02_pm_gps_dev.dev,
 535                 .supply = "RF_3V",
 536         },
 537 };
 538
 539 static struct regulator_consumer_supply hcldo_consumers[] = {
 540         {
 541                 .dev = &gta02_glamo_dev.dev,
 542                 .supply = "SD_3V3",
 543         },
 544 };
 545
 546 static char *gta02_batteries[] = {
 547         "battery",
 548 };
 549
 550 #ifdef CONFIG_CHARGER_PCF50633
 551
 552 struct pcf50633_platform_data gta02_pcf_pdata = {
 553         .resumers = {
 554                 [0] =   PCF50633_INT1_USBINS |
 555                         PCF50633_INT1_USBREM |
 556                         PCF50633_INT1_ALARM,
 557                 [1] =   PCF50633_INT2_ONKEYF,
 558                 [2] =   PCF50633_INT3_ONKEY1S,
 559                 [3] =   PCF50633_INT4_LOWSYS |
 560                         PCF50633_INT4_LOWBAT |
 561                         PCF50633_INT4_HIGHTMP,
 562         },
 563
 564         .batteries = gta02_batteries,
 565         .num_batteries = ARRAY_SIZE(gta02_batteries),
 566         .charging_restart_interval = (900 * HZ),
 567         .chg_ref_current_ma = 1000,
 568
 569         .reg_init_data = {
 570                 [PCF50633_REGULATOR_AUTO] = {
 571                         .constraints = {
 572                                 .name = "IO_3V3",
 573                                 .min_uV = 3300000,
 574                                 .max_uV = 3300000,
 575                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 576                                 .boot_on = 1,
 577                                 .always_on = 1,
 578                                 .apply_uV = 1,
 579                                 .state_mem = {
 580                                         .enabled = 1,
 581                                 },
 582                         },
 583                         .num_consumer_supplies = 0,
 584                 },
 585                 [PCF50633_REGULATOR_DOWN1] = {
 586                         .constraints = {
 587                                 .name = "CORE_1V3",
 588                                 .min_uV = 1300000,
 589                                 .max_uV = 1600000,
 590                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 591                                 .boot_on = 1,
 592                                 .always_on = 1,
 593                                 .apply_uV = 1,
 594                         },
 595                         .num_consumer_supplies = 0,
 596                 },
 597                 [PCF50633_REGULATOR_DOWN2] = {
 598                         .constraints = {
 599                                 .name = "IO_1V8",
 600                                 .min_uV = 1800000,
 601                                 .max_uV = 1800000,
 602                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 603                                 .apply_uV = 1,
 604                                 .boot_on = 1,
 605                                 .always_on = 1,
 606                                 .state_mem = {
 607                                         .enabled = 1,
 608                                 },
 609                         },
 610                         .num_consumer_supplies = 0,
 611                 },
 612                 [PCF50633_REGULATOR_HCLDO] = {
 613                         .constraints = {
 614                                 .name = "SD_3V3",
 615                                 .min_uV = 2000000,
 616                                 .max_uV = 3300000,
 617                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 618                                 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
 619                                 .boot_on = 1,
 620                         },
 621                         .num_consumer_supplies = 1,
 622                         .consumer_supplies = hcldo_consumers,
 623                 },
 624                 [PCF50633_REGULATOR_LDO1] = {
 625                         .constraints = {
 626                                 .name = "GSENSOR_3V3",
 627                                 .min_uV = 3300000,
 628                                 .max_uV = 3300000,
 629                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 630                                 .apply_uV = 1,
 631                         },
 632                         .num_consumer_supplies = 0,
 633                 },
 634                 [PCF50633_REGULATOR_LDO2] = {
 635                         .constraints = {
 636                                 .name = "CODEC_3V3",
 637                                 .min_uV = 3300000,
 638                                 .max_uV = 3300000,
 639                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 640                                 .apply_uV = 1,
 641                         },
 642                         .num_consumer_supplies = 0,
 643                 },
 644                 [PCF50633_REGULATOR_LDO3] = {
 645                         .constraints = {
 646                                 .min_uV = 3000000,
 647                                 .max_uV = 3000000,
 648                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 649                                 .apply_uV = 1,
 650                         },
 651                         .num_consumer_supplies = 0,
 652                 },
 653                 [PCF50633_REGULATOR_LDO4] = {
 654                         .constraints = {
 655                                 .name = "BT_3V2",
 656                                 .min_uV = 3200000,
 657                                 .max_uV = 3200000,
 658                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 659                                 .apply_uV = 1,
 660                         },
 661                         .num_consumer_supplies = 1,
 662                         .consumer_supplies = ldo4_consumers,
 663                 },
 664                 [PCF50633_REGULATOR_LDO5] = {
 665                         .constraints = {
 666                                 .name = "RF_3V",
 667                                 .min_uV = 3000000,
 668                                 .max_uV = 3000000,
 669                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 670                                 .apply_uV = 1,
 671                                 .state_mem = {
 672                                         .enabled = 1,
 673                                 },
 674                         },
 675                         .num_consumer_supplies = 1,
 676                         .consumer_supplies = ldo5_consumers,
 677                 },
 678                 [PCF50633_REGULATOR_LDO6] = {
 679                         .constraints = {
 680                                 .name = "LCM_3V",
 681                                 .min_uV = 3000000,
 682                                 .max_uV = 3000000,
 683                                 .always_on = 1,
 684                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 685                                 .apply_uV = 1,
 686                         },
 687                         .num_consumer_supplies = 0,
 688                 },
 689                 [PCF50633_REGULATOR_MEMLDO] = {
 690                         .constraints = {
 691                                 .min_uV = 1800000,
 692                                 .max_uV = 1800000,
 693                                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 694                                 .state_mem = {
 695                                         .enabled = 1,
 696                                 },
 697                         },
 698                         .num_consumer_supplies = 0,
 699                 },
 700
 701         },
 702         .probe_done = gta02_pmu_attach_child_devices,
 703         .regulator_registered = gta02_pmu_regulator_registered,
 704         .mbc_event_callback = gta02_pmu_event_callback,
 705         .force_shutdown = gta02_pmu_force_shutdown,
 706 };
 707
 708 static void mangle_pmu_pdata_by_system_rev(void)
 709 {
 710         struct regulator_init_data *reg_init_data;
 711
 712         reg_init_data = gta02_pcf_pdata.reg_init_data;
 713
 714         switch (S3C_SYSTEM_REV_ATAG) {
 715         case GTA02v1_SYSTEM_REV:
 716                 /* FIXME: this is only in v1 due to wrong PMU variant */
 717                 reg_init_data[PCF50633_REGULATOR_DOWN2]
 718                                         .constraints.state_mem.enabled = 1;
 719
 720                 reg_init_data[PCF50633_REGULATOR_LDO1]
 721                                         .constraints.min_uV = 1300000;
 722                 reg_init_data[PCF50633_REGULATOR_LDO1]
 723                                         .constraints.max_uV = 1300000;
 724
 725                 reg_init_data[PCF50633_REGULATOR_LDO5]
 726                                         .constraints.min_uV = 1500000;
 727                 reg_init_data[PCF50633_REGULATOR_LDO5]
 728                                         .constraints.max_uV = 1500000;
 729
 730                 reg_init_data[PCF50633_REGULATOR_LDO6]
 731                                         .constraints.min_uV = 0;
 732                 reg_init_data[PCF50633_REGULATOR_LDO6]
 733                                         .constraints.max_uV = 3300000;
 734                 reg_init_data[PCF50633_REGULATOR_LDO6]
 735                                         .constraints.apply_uV = 1;
 736                 break;
 737         default:
 738                 break;
 739         }
 740 }
 741
 742 #endif
 743
 744 #ifdef CONFIG_HDQ_GPIO_BITBANG
 745 /* BQ27000 Battery */
 746
 747 struct bq27000_platform_data bq27000_pdata = {
 748         .name = "battery",
 749         .rsense_mohms = 20,
 750         .hdq_read = hdq_read,
 751         .hdq_write = hdq_write,
 752         .hdq_initialized = hdq_initialized,
 753         .get_charger_online_status = gta02_get_charger_online_status,
 754         .get_charger_active_status = gta02_get_charger_active_status
 755 };
 756
 757 struct platform_device bq27000_battery_device = {
 758         .name           = "bq27000-battery",
 759         .dev = {
 760                 .platform_data = &bq27000_pdata,
 761         },
 762 };
 763
 764 /* HDQ */
 765
 766 static void gta02_hdq_attach_child_devices(struct device *parent_device)
 767 {
 768         switch (S3C_SYSTEM_REV_ATAG) {
 769         case GTA02v5_SYSTEM_REV:
 770         case GTA02v6_SYSTEM_REV:
 771                 bq27000_battery_device.dev.parent = parent_device;
 772                 platform_device_register(&bq27000_battery_device);
 773                 break;
 774         default:
 775                 break;
 776         }
 777 }
 778
 779 static void gta02_hdq_gpio_direction_out(void)
 780 {
 781         s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT);
 782 }
 783
 784 static void gta02_hdq_gpio_direction_in(void)
 785 {
 786         s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT);
 787 }
 788
 789 static void gta02_hdq_gpio_set_value(int val)
 790 {
 791
 792         s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val);
 793 }
 794
 795 static int gta02_hdq_gpio_get_value(void)
 796 {
 797         return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ);
 798 }
 799
 800 static struct resource gta02_hdq_resources[] = {
 801         [0] = {
 802                 .start  = GTA02v5_GPIO_HDQ,
 803                 .end    = GTA02v5_GPIO_HDQ,
 804         },
 805 };
 806
 807 struct hdq_platform_data gta02_hdq_platform_data = {
 808         .attach_child_devices = gta02_hdq_attach_child_devices,
 809         .gpio_dir_out = gta02_hdq_gpio_direction_out,
 810         .gpio_dir_in = gta02_hdq_gpio_direction_in,
 811         .gpio_set = gta02_hdq_gpio_set_value,
 812         .gpio_get = gta02_hdq_gpio_get_value,
 813
 814         .enable_fiq = gta02_fiq_enable,
 815         .disable_fiq = gta02_fiq_disable,
 816         .kick_fiq = gta02_fiq_kick,
 817
 818 };
 819
 820 struct platform_device gta02_hdq_device = {
 821         .name           = "hdq",
 822         .num_resources  = 1,
 823         .resource       = gta02_hdq_resources,
 824         .dev            = {
 825                 .platform_data = &gta02_hdq_platform_data,
 826         },
 827 };
 828 #endif
 829
 830
 831 #ifdef CONFIG_LEDS_GTA02_VIBRATOR
 832 /* vibrator (child of FIQ) */
 833
 834 static struct resource gta02_vibrator_resources[] = {
 835         [0] = {
 836                 .start  = GTA02_GPIO_VIBRATOR_ON,
 837                 .end    = GTA02_GPIO_VIBRATOR_ON,
 838         },
 839 };
 840 struct gta02_vib_platform_data gta02_vib_pdata = {
 841         .enable_fiq = gta02_fiq_enable,
 842         .disable_fiq = gta02_fiq_disable,
 843         .kick_fiq = gta02_fiq_kick,
 844 };
 845
 846 static struct platform_device gta02_vibrator_dev = {
 847         .name           = "gta02-vibrator",
 848         .num_resources  = ARRAY_SIZE(gta02_vibrator_resources),
 849         .resource       = gta02_vibrator_resources,
 850         .dev     = {
 851                 .platform_data = &gta02_vib_pdata,
 852                 },
 853 };
 854 #endif
 855
 856 /* NOR Flash */
 857
 858 #define GTA02_FLASH_BASE        S3C2410_CS3 /* GCS3 */
 859 #define GTA02_FLASH_SIZE        0x200000 /* 2MBytes */
 860
 861 static struct physmap_flash_data gta02_nor_flash_data = {
 862         .width          = 2,
 863 };
 864
 865 static struct resource gta02_nor_flash_resource = {
 866         .start          = GTA02_FLASH_BASE,
 867         .end            = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
 868         .flags          = IORESOURCE_MEM,
 869 };
 870
 871 static struct platform_device gta02_nor_flash = {
 872         .name           = "physmap-flash",
 873         .id             = 0,
 874         .dev            = {
 875                                 .platform_data  = &gta02_nor_flash_data,
 876                         },
 877         .resource       = &gta02_nor_flash_resource,
 878         .num_resources  = 1,
 879 };
 880
 881
 882 struct platform_device s3c24xx_pwm_device = {
 883         .name           = "s3c24xx_pwm",
 884         .num_resources  = 0,
 885 };
 886
 887 static struct i2c_board_info gta02_i2c_devs[] __initdata = {
 888         {
 889                 I2C_BOARD_INFO("pcf50633", 0x73),
 890                 .irq = GTA02_IRQ_PCF50633,
 891                 .platform_data = &gta02_pcf_pdata,
 892         },
 893         {
 894                 I2C_BOARD_INFO("wm8753", 0x1a),
 895         },
 896 };
 897
 898 static struct s3c2410_nand_set gta02_nand_sets[] = {
 899         [0] = {
 900                 .name           = "neo1973-nand",
 901                 .nr_chips       = 1,
 902                 .flags          = S3C2410_NAND_BBT,
 903         },
 904 };
 905
 906 /* choose a set of timings derived from S3C@2442B MCP54
 907  * data sheet (K5D2G13ACM-D075 MCP Memory)
 908  */
 909
 910 static struct s3c2410_platform_nand gta02_nand_info = {
 911         .tacls          = 0,
 912         .twrph0         = 25,
 913         .twrph1         = 15,
 914         .nr_sets        = ARRAY_SIZE(gta02_nand_sets),
 915         .sets           = gta02_nand_sets,
 916         .software_ecc   = 1,
 917 };
 918
 919
 920 static void gta02_s3c_mmc_set_power(unsigned char power_mode,
 921     unsigned short vdd)
 922 {
 923         static int is_on = -1;
 924         int on;
 925
 926         on = power_mode == MMC_POWER_ON || power_mode == MMC_POWER_UP;
 927         if (is_on != on)
 928                 gta02_wlan_reset(!on);
 929         is_on = on;
 930 }
 931
 932
 933 static struct s3c24xx_mci_pdata gta02_s3c_mmc_cfg = {
 934         .set_power      = gta02_s3c_mmc_set_power,
 935 };
 936
 937 static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
 938 {
 939         switch (cmd) {
 940         case S3C2410_UDC_P_ENABLE:
 941                 printk(KERN_DEBUG "%s S3C2410_UDC_P_ENABLE\n", __func__);
 942             gta02_gpb_setpin(GTA02_GPIO_USB_PULLUP, 1);
 943                 break;
 944         case S3C2410_UDC_P_DISABLE:
 945                 printk(KERN_DEBUG "%s S3C2410_UDC_P_DISABLE\n", __func__);
 946                 gta02_gpb_setpin(GTA02_GPIO_USB_PULLUP, 0);
 947                 break;
 948         case S3C2410_UDC_P_RESET:
 949                 printk(KERN_DEBUG "%s S3C2410_UDC_P_RESET\n", __func__);
 950                 /* FIXME! */
 951                 break;
 952         default:
 953                 break;
 954         }
 955 }
 956
 957 /* get PMU to set USB current limit accordingly */
 958
 959 static struct s3c2410_udc_mach_info gta02_udc_cfg = {
 960         .vbus_draw      = gta02_udc_vbus_draw,
 961         .udc_command    = gta02_udc_command,
 962 /*      .get_vbus_status = gta02_udc_vbus_status,*/
 963 };
 964
 965
 966 /* Touchscreen configuration. */
 967
 968 #ifdef CONFIG_TOUCHSCREEN_FILTER
 969 const static struct ts_filter_group_configuration gta02_ts_group = {
 970         .length = 12,
 971         .close_enough = 10,
 972         .threshold = 6,         /* At least half of the points in a group. */
 973         .attempts = 10,
 974 };
 975
 976 const static struct ts_filter_median_configuration gta02_ts_median = {
 977         .extent = 20,
 978         .decimation_below = 3,
 979         .decimation_threshold = 8 * 3,
 980         .decimation_above = 4,
 981 };
 982
 983 const static struct ts_filter_mean_configuration gta02_ts_mean = {
 984         .length = 4,
 985 };
 986
 987 const static struct ts_filter_linear_configuration gta02_ts_linear = {
 988         .constants = {1, 0, 0, 0, 1, 0, 1},     /* Don't modify coords. */
 989         .coord0 = 0,
 990         .coord1 = 1,
 991 };
 992 #endif
 993
 994 const static struct ts_filter_chain_configuration gta02_filter_configuration[] =
 995 {
 996 #ifdef CONFIG_TOUCHSCREEN_FILTER
 997         {&ts_filter_group_api,          &gta02_ts_group.config},
 998         {&ts_filter_median_api,         &gta02_ts_median.config},
 999         {&ts_filter_mean_api,           &gta02_ts_mean.config},
1000         {&ts_filter_linear_api,         &gta02_ts_linear.config},
1001 #endif
1002         {NULL, NULL},
1003 };
1004
1005 const static struct s3c2410_ts_mach_info gta02_ts_cfg = {
1006         .delay = 10000,
1007         .presc = 0xff, /* slow as we can go */
1008         .filter_config = gta02_filter_configuration,
1009 };
1010
1011
1012
1013 static void gta02_bl_set_intensity(int intensity)
1014 {
1015         struct pcf50633 *pcf = gta02_pcf;
1016         int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
1017         int ret;
1018
1019         intensity >>= 2;
1020
1021         /*
1022          * One code path that leads here is from a kernel panic. Trying to turn
1023          * the backlight on just gives us a nearly endless stream of complaints
1024          * and accomplishes nothing. We can't win. Just give up.
1025          *
1026          * In the unlikely event that there's another path leading here while
1027          * we're atomic, we print at least a warning.
1028          */
1029         if (in_atomic()) {
1030                 printk(KERN_ERR
1031                     "gta02_bl_set_intensity called while atomic\n");
1032                 return;
1033         }
1034
1035         if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
1036                 old_intensity = 0;
1037         else
1038                 old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
1039
1040         if (intensity == old_intensity)
1041                 return;
1042
1043         /* We can't do this anywhere else */
1044         pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
1045
1046         /*
1047          * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
1048          * if seen, you have to re-enable the LED unit
1049          */
1050         if (!intensity || !old_intensity)
1051                 pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
1052
1053         if (!intensity) /* illegal to set LEDOUT to 0 */
1054                 ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
1055                                                                              2);
1056         else
1057                 ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
1058                                intensity);
1059
1060         if (intensity)
1061                 pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
1062
1063 }
1064
1065 static struct generic_bl_info gta02_bl_info = {
1066         .name                   = "gta02-bl",
1067         .max_intensity          = 0xff,
1068         .default_intensity      = 0xff,
1069         .set_bl_intensity       = gta02_bl_set_intensity,
1070 };
1071
1072 static struct platform_device gta02_bl_dev = {
1073         .name             = "generic-bl",
1074         .id               = 1,
1075         .dev = {
1076                 .platform_data = &gta02_bl_info,
1077         },
1078 };
1079
1080 /* SPI: LCM control interface attached to Glamo3362 */
1081
1082 static void gta02_jbt6k74_reset(int devidx, int level)
1083 {
1084         glamo_lcm_reset(&gta02_glamo_dev, level);
1085 }
1086
1087 static void gta02_jbt6k74_probe_completed(struct device *dev)
1088 {
1089         struct pcf50633 *pcf = gta02_pcf;
1090
1091         /* Switch on backlight. Qi does not do it for us */
1092         pcf50633_reg_write(pcf, PCF50633_REG_LEDOUT, 0x01);
1093         pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
1094         pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 0x01);
1095         pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x01);
1096
1097         gta02_bl_dev.dev.parent = dev;
1098         platform_device_register(&gta02_bl_dev);
1099 }
1100
1101 const struct jbt6k74_platform_data jbt6k74_pdata = {
1102         .reset          = gta02_jbt6k74_reset,
1103         .probe_completed = gta02_jbt6k74_probe_completed,
1104 };
1105
1106 /*----------- SPI: Accelerometers attached to SPI of s3c244x ----------------- */
1107
1108 void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
1109 {
1110         struct lis302dl_platform_data *pdata = lis->pdata;
1111
1112         if (!resume) {
1113                  /*
1114                  * we don't want to power them with a high level
1115                  * because GSENSOR_3V3 is not up during suspend
1116                  */
1117                 s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
1118                 s3c2410_gpio_setpin(pdata->pin_clk, 0);
1119                 s3c2410_gpio_setpin(pdata->pin_mosi, 0);
1120                 /* misnomer: it is a pullDOWN in 2442 */
1121                 s3c2410_gpio_pullup(pdata->pin_miso, 1);
1122                 return;
1123         }
1124
1125         /* back to normal */
1126         s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
1127         s3c2410_gpio_setpin(pdata->pin_clk, 1);
1128         /* misnomer: it is a pullDOWN in 2442 */
1129         s3c2410_gpio_pullup(pdata->pin_miso, 0);
1130
1131         s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT);
1132         s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT);
1133         s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT);
1134         s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT);
1135
1136 }
1137
1138 struct lis302dl_platform_data lis302_pdata_top = {
1139                 .name           = "lis302-1 (top)",
1140                 .pin_chip_select= S3C2410_GPD12,
1141                 .pin_clk        = S3C2410_GPG7,
1142                 .pin_mosi       = S3C2410_GPG6,
1143                 .pin_miso       = S3C2410_GPG5,
1144                 .interrupt      = GTA02_IRQ_GSENSOR_1,
1145                 .open_drain     = 1, /* altered at runtime by PCB rev */
1146                 .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
1147 };
1148
1149 struct lis302dl_platform_data lis302_pdata_bottom = {
1150                 .name           = "lis302-2 (bottom)",
1151                 .pin_chip_select= S3C2410_GPD13,
1152                 .pin_clk        = S3C2410_GPG7,
1153                 .pin_mosi       = S3C2410_GPG6,
1154                 .pin_miso       = S3C2410_GPG5,
1155                 .interrupt      = GTA02_IRQ_GSENSOR_2,
1156                 .open_drain     = 1, /* altered at runtime by PCB rev */
1157                 .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
1158 };
1159
1160 static struct spi_board_info gta02_spi_board_info[] = {
1161         {
1162                 .modalias       = "jbt6k74",
1163                 /* platform_data */
1164                 .platform_data  = &jbt6k74_pdata,
1165                 /* controller_data */
1166                 /* irq */
1167                 .max_speed_hz   = 100 * 1000,
1168                 .bus_num        = 2,
1169                 /* chip_select */
1170         },
1171         {
1172                 .modalias       = "lis302dl",
1173                 /* platform_data */
1174                 .platform_data  = &lis302_pdata_top,
1175                 /* controller_data */
1176                 /* irq */
1177                 .max_speed_hz   = 100 * 1000,
1178                 .bus_num        = 3,
1179                 .chip_select    = 0,
1180         },
1181
1182         {
1183                 .modalias       = "lis302dl",
1184                 /* platform_data */
1185                 .platform_data  = &lis302_pdata_bottom,
1186                 /* controller_data */
1187                 /* irq */
1188                 .max_speed_hz   = 100 * 1000,
1189                 .bus_num        = 3,
1190                 .chip_select    = 1,
1191         },
1192
1193 };
1194
1195 static void gta02_lis302_chip_select(struct s3c2410_spigpio_info *info, int csid, int cs)
1196 {
1197
1198         /*
1199          * Huh... "quirk"... CS on this device is not really "CS" like you can
1200          * expect.
1201          *
1202          * When it is 0 it selects SPI interface mode.
1203          * When it is 1 it selects I2C interface mode.
1204          *
1205          * Because we have 2 devices on one interface we have to make sure
1206          * that the "disabled" device (actually in I2C mode) don't think we're
1207          * talking to it.
1208          *
1209          * When we talk to the "enabled" device, the "disabled" device sees
1210          * the clocks as I2C clocks, creating havoc.
1211          *
1212          * I2C sees MOSI going LOW while CLK HIGH as a START action, thus we
1213          * must ensure this is never issued.
1214          */
1215
1216         int cs_gpio, other_cs_gpio;
1217
1218         cs_gpio = csid ? S3C2410_GPD13 : S3C2410_GPD12;
1219         other_cs_gpio = (1 - csid) ? S3C2410_GPD13 : S3C2410_GPD12;
1220
1221
1222         if (cs == BITBANG_CS_ACTIVE) {
1223                 s3c2410_gpio_setpin(other_cs_gpio, 1);
1224                 s3c2410_gpio_setpin(cs_gpio, 1);
1225                 s3c2410_gpio_setpin(info->pin_clk, 1);
1226                 s3c2410_gpio_setpin(cs_gpio, 0);
1227         } else {
1228                 s3c2410_gpio_setpin(cs_gpio, 1);
1229                 s3c2410_gpio_setpin(other_cs_gpio, 1);
1230         }
1231 }
1232
1233 static struct s3c2410_spigpio_info gta02_spigpio_cfg = {
1234         .pin_clk        = S3C2410_GPG7,
1235         .pin_mosi       = S3C2410_GPG6,
1236         .pin_miso       = S3C2410_GPG5,
1237         .bus_num        = 3,
1238         .num_chipselect = 2,
1239         .chip_select    = gta02_lis302_chip_select,
1240         .non_blocking_transfer = 1,
1241 };
1242
1243 static struct platform_device gta02_spi_gpio_dev = {
1244         .name           = "spi_s3c24xx_gpio",
1245         .dev = {
1246                 .platform_data = &gta02_spigpio_cfg,
1247         },
1248 };
1249
1250 /*----------- / SPI: Accelerometers attached to SPI of s3c244x ----------------- */
1251
1252 static struct resource gta02_led_resources[] = {
1253         {
1254                 .name   = "gta02-power:orange",
1255                 .start  = GTA02_GPIO_PWR_LED1,
1256                 .end    = GTA02_GPIO_PWR_LED1,
1257         }, {
1258                 .name   = "gta02-power:blue",
1259                 .start  = GTA02_GPIO_PWR_LED2,
1260                 .end    = GTA02_GPIO_PWR_LED2,
1261         }, {
1262                 .name   = "gta02-aux:red",
1263                 .start  = GTA02_GPIO_AUX_LED,
1264                 .end    = GTA02_GPIO_AUX_LED,
1265         },
1266 };
1267
1268 struct platform_device gta02_led_dev = {
1269         .name           = "gta02-led",
1270         .num_resources  = ARRAY_SIZE(gta02_led_resources),
1271         .resource       = gta02_led_resources,
1272 };
1273
1274 static struct resource gta02_button_resources[] = {
1275         [0] = {
1276                 .start = GTA02_GPIO_AUX_KEY,
1277                 .end   = GTA02_GPIO_AUX_KEY,
1278         },
1279         [1] = {
1280                 .start = GTA02_GPIO_HOLD_KEY,
1281                 .end   = GTA02_GPIO_HOLD_KEY,
1282         },
1283         [2] = {
1284                 .start = GTA02_GPIO_JACK_INSERT,
1285                 .end   = GTA02_GPIO_JACK_INSERT,
1286         },
1287         [3] = {
1288                 .start = 0,
1289                 .end   = 0,
1290         },
1291         [4] = {
1292                 .start = 0,
1293                 .end   = 0,
1294         },
1295 };
1296
1297 static struct platform_device gta02_button_dev = {
1298         .name           = "gta02-button",
1299         .num_resources  = ARRAY_SIZE(gta02_button_resources),
1300         .resource       = gta02_button_resources,
1301 };
1302
1303 static struct platform_device gta02_pm_usbhost_dev = {
1304         .name           = "gta02-pm-host",
1305 };
1306
1307
1308 /* USB */
1309 static struct s3c2410_hcd_info gta02_usb_info = {
1310         .port[0]        = {
1311                 .flags  = S3C_HCDFLG_USED,
1312         },
1313         .port[1]        = {
1314                 .flags  = 0,
1315         },
1316 };
1317
1318 static int glamo_irq_is_wired(void)
1319 {
1320         int rc;
1321         int count = 0;
1322
1323         /*
1324         * GTA02 S-Media IRQs prior to A5 are broken due to a lack of
1325         * a pullup on the INT# line.  Check for the bad behaviour.
1326         */
1327         s3c2410_gpio_setpin(S3C2410_GPG4, 0);
1328         s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_OUTP);
1329         s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_INP);
1330         /*
1331         * we force it low ourselves for a moment and resume being input.
1332         * If there is a pullup, it won't stay low for long.  But if the
1333         * level converter is there as on < A5 revision, the weak keeper
1334         * on the input of the LC will hold the line low indefinitiely
1335         */
1336         do
1337                 rc = s3c2410_gpio_getpin(S3C2410_GPG4);
1338         while ((!rc) && ((count++) < 10));
1339         if (rc) { /* it got pulled back up, it's good */
1340                 printk(KERN_INFO "Detected S-Media IRQ# pullup, "
1341                 "enabling interrupt\n");
1342                 return 0;
1343         } else  /* Gah we can't work with this level converter */
1344                 printk(KERN_WARNING "** Detected bad IRQ# circuit found"
1345                 " on pre-A5 GTA02: S-Media interrupt disabled **\n");
1346         return -ENODEV;
1347 }
1348
1349 /* Smedia Glamo 3362 */
1350
1351 /*
1352  * we crank down SD Card clock dynamically when GPS is powered
1353  */
1354
1355 static int gta02_glamo_mci_use_slow(void)
1356 {
1357         return gta02_pm_gps_is_on();
1358 }
1359
1360 static void gta02_glamo_external_reset(int level)
1361 {
1362         s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level);
1363         s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
1364 }
1365
1366 static struct fb_videomode gta02_glamo_modes[] = {
1367         {
1368                 .name = "480x640",
1369                 .xres = 480,
1370                 .yres = 640,
1371                 .pixclock       = 40816,
1372                 .left_margin    = 8,
1373                 .right_margin   = 16,
1374                 .upper_margin   = 2,
1375                 .lower_margin   = 16,
1376                 .hsync_len      = 8,
1377                 .vsync_len      = 2,
1378                 .vmode = FB_VMODE_NONINTERLACED,
1379         }, {
1380                 .name = "240x320",
1381                 .xres = 240,
1382                 .yres = 320,
1383                 .pixclock       = 40816,
1384                 .left_margin    = 8,
1385                 .right_margin   = 16,
1386                 .upper_margin   = 2,
1387                 .lower_margin   = 16,
1388                 .hsync_len      = 8,
1389                 .vsync_len      = 2,
1390                 .vmode = FB_VMODE_NONINTERLACED,
1391         }
1392 };
1393
1394 static struct glamo_fb_platform_data gta02_glamo_fb_pdata = {
1395         .width  = 43,
1396         .height = 58,
1397
1398         .num_modes = ARRAY_SIZE(gta02_glamo_modes),
1399         .modes = gta02_glamo_modes,
1400 };
1401
1402 static struct glamo_spigpio_platform_data gta02_glamo_spigpio_pdata = {
1403         .pin_clk  = GLAMO_GPIO10_OUTPUT,
1404         .pin_mosi = GLAMO_GPIO11_OUTPUT,
1405         .pin_cs   = GLAMO_GPIO12_OUTPUT,
1406         .pin_miso = 0,
1407         .bus_num  = 2,
1408 };
1409
1410 static struct glamo_mmc_platform_data gta02_glamo_mmc_pdata = {
1411         .glamo_mmc_use_slow = gta02_glamo_mci_use_slow,
1412 };
1413
1414 static struct glamo_platform_data gta02_glamo_pdata = {
1415         .fb_data      = &gta02_glamo_fb_pdata,
1416         .spigpio_data = &gta02_glamo_spigpio_pdata,
1417         .mmc_data     = &gta02_glamo_mmc_pdata,
1418
1419     .osci_clock_rate = 32768,
1420
1421         .glamo_irq_is_wired = glamo_irq_is_wired,
1422         .glamo_external_reset = gta02_glamo_external_reset,
1423 };
1424
1425 static struct resource gta02_glamo_resources[] = {
1426         [0] = {
1427                 .start  = S3C2410_CS1,
1428                 .end    = S3C2410_CS1 + 0x1000000 - 1,
1429                 .flags  = IORESOURCE_MEM,
1430         },
1431         [1] = {
1432                 .start  = GTA02_IRQ_3D,
1433                 .end    = GTA02_IRQ_3D,
1434                 .flags  = IORESOURCE_IRQ,
1435         },
1436         [2] = {
1437                 .start = GTA02_GPIO_3D_RESET,
1438                 .end   = GTA02_GPIO_3D_RESET,
1439         },
1440 };
1441
1442 static struct platform_device gta02_glamo_dev = {
1443         .name           = "glamo3362",
1444         .num_resources  = ARRAY_SIZE(gta02_glamo_resources),
1445         .resource       = gta02_glamo_resources,
1446         .dev            = {
1447                 .platform_data  = &gta02_glamo_pdata,
1448         },
1449 };
1450
1451 static void mangle_glamo_res_by_system_rev(void)
1452 {
1453         switch (S3C_SYSTEM_REV_ATAG) {
1454         case GTA02v1_SYSTEM_REV:
1455                 break;
1456         default:
1457                 gta02_glamo_resources[2].start = GTA02_GPIO_3D_RESET;
1458                 gta02_glamo_resources[2].end = GTA02_GPIO_3D_RESET;
1459                 break;
1460         }
1461
1462         switch (S3C_SYSTEM_REV_ATAG) {
1463         case GTA02v1_SYSTEM_REV:
1464         case GTA02v2_SYSTEM_REV:
1465         case GTA02v3_SYSTEM_REV:
1466         /* case GTA02v4_SYSTEM_REV: - FIXME: handle this later */
1467                 /* The hardware is missing a pull-up resistor and thus can't
1468                  * support the Smedia Glamo IRQ */
1469                 gta02_glamo_resources[1].start = 0;
1470                 gta02_glamo_resources[1].end = 0;
1471                 break;
1472         }
1473 }
1474
1475 static void __init gta02_map_io(void)
1476 {
1477         s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
1478         s3c24xx_init_clocks(12000000);
1479         s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
1480 }
1481
1482 static irqreturn_t gta02_modem_irq(int irq, void *param)
1483 {
1484 /*      printk(KERN_DEBUG "modem wakeup interrupt\n");*/
1485         gta_gsm_interrupts++;
1486         return IRQ_HANDLED;
1487 }
1488
1489 static irqreturn_t ar6000_wow_irq(int irq, void *param)
1490 {
1491 /*      printk(KERN_DEBUG "ar6000_wow interrupt\n");*/
1492         return IRQ_HANDLED;
1493 }
1494
1495 /*
1496  * hardware_ecc=1|0
1497  */
1498 static char hardware_ecc_str[4] __initdata = "";
1499
1500 static int __init hardware_ecc_setup(char *str)
1501 {
1502         if (str)
1503                 strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str));
1504         return 1;
1505 }
1506
1507 __setup("hardware_ecc=", hardware_ecc_setup);
1508
1509 /* these are the guys that don't need to be children of PMU */
1510
1511 static struct platform_device *gta02_devices[] __initdata = {
1512         &s3c_device_usb,
1513         &s3c_device_wdt,
1514         &s3c_device_sdi,
1515         &s3c_device_usbgadget,
1516         &s3c_device_nand,
1517         &gta02_nor_flash,
1518
1519         &s3c24xx_pwm_device,
1520         &gta02_led_dev,
1521         &gta02_pm_wlan_dev, /* not dependent on PMU */
1522
1523         &s3c_device_iis,
1524         &s3c_device_i2c0,
1525 };
1526
1527 /* these guys DO need to be children of PMU */
1528
1529 static struct platform_device *gta02_devices_pmu_children[] = {
1530         &s3c_device_ts, /* input 1 */
1531         &gta02_pm_gsm_dev,
1532         &gta02_pm_usbhost_dev,
1533         &gta02_spi_gpio_dev, /* input 2 and 3 */
1534         &gta02_button_dev, /* input 4 */
1535         &gta02_resume_reason_device,
1536 };
1537
1538 static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id)
1539 {
1540         struct platform_device *regulator, *pdev;
1541
1542         gta02_pcf = pcf;
1543
1544         regulator = pcf->regulator_pdev[id];
1545
1546         switch(id) {
1547                 case PCF50633_REGULATOR_LDO4:
1548                         pdev = &gta02_pm_bt_dev;
1549                         break;
1550                 case PCF50633_REGULATOR_LDO5:
1551                         pdev = &gta02_pm_gps_dev;
1552                         break;
1553                 case PCF50633_REGULATOR_HCLDO:
1554                         pdev = &gta02_glamo_dev;
1555                         break;
1556                 default:
1557                         return;
1558         }
1559
1560         pdev->dev.parent = &regulator->dev;
1561         platform_device_register(pdev);
1562 }
1563
1564 /* this is called when pc50633 is probed, unfortunately quite late in the
1565  * day since it is an I2C bus device.  Here we can belatedly define some
1566  * platform devices with the advantage that we can mark the pcf50633 as the
1567  * parent.  This makes them get suspended and resumed with their parent
1568  * the pcf50633 still around.
1569  */
1570
1571 static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
1572 {
1573         int n;
1574
1575         for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
1576                 gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
1577
1578         mangle_glamo_res_by_system_rev();
1579         platform_add_devices(gta02_devices_pmu_children,
1580                                         ARRAY_SIZE(gta02_devices_pmu_children));
1581
1582     regulator_has_full_constraints();
1583 }
1584
1585 static void gta02_poweroff(void)
1586 {
1587         pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN,
1588                   PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
1589 }
1590
1591 static void __init gta02_machine_init(void)
1592 {
1593         int rc;
1594
1595         /* set the panic callback to make AUX blink fast */
1596         panic_blink = gta02_panic_blink;
1597
1598         switch (S3C_SYSTEM_REV_ATAG) {
1599         case GTA02v6_SYSTEM_REV:
1600                 /* we need push-pull interrupt from motion sensors */
1601                 lis302_pdata_top.open_drain = 0;
1602                 lis302_pdata_bottom.open_drain = 0;
1603                 break;
1604         default:
1605                 break;
1606         }
1607
1608         spin_lock_init(&motion_irq_lock);
1609
1610 #ifdef CONFIG_CHARGER_PCF50633
1611         INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
1612 #endif
1613
1614         /* Glamo chip select optimization */
1615 /*       *((u32 *)(S3C2410_MEMREG(((1 + 1) << 2)))) = 0x1280; */
1616
1617         /* do not force soft ecc if we are asked to use hardware_ecc */
1618         if (hardware_ecc_str[0] == '1')
1619                 gta02_nand_info.software_ecc = 0;
1620
1621         s3c_device_usb.dev.platform_data = &gta02_usb_info;
1622         s3c_device_nand.dev.platform_data = &gta02_nand_info;
1623         s3c_device_sdi.dev.platform_data = &gta02_s3c_mmc_cfg;
1624
1625         /* acc sensor chip selects */
1626         s3c2410_gpio_setpin(S3C2410_GPD12, 1);
1627         s3c2410_gpio_cfgpin(S3C2410_GPD12, S3C2410_GPIO_OUTPUT);
1628         s3c2410_gpio_setpin(S3C2410_GPD13, 1);
1629         s3c2410_gpio_cfgpin(S3C2410_GPD13, S3C2410_GPIO_OUTPUT);
1630
1631         s3c24xx_udc_set_platdata(&gta02_udc_cfg);
1632         s3c_i2c0_set_platdata(NULL);
1633         set_s3c2410ts_info(&gta02_ts_cfg);
1634
1635         mangle_glamo_res_by_system_rev();
1636
1637         i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
1638         spi_register_board_info(gta02_spi_board_info,
1639                                 ARRAY_SIZE(gta02_spi_board_info));
1640
1641 #ifdef CONFIG_CHARGER_PCF50633
1642         mangle_pmu_pdata_by_system_rev();
1643 #endif
1644
1645         platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
1646
1647         s3c_pm_init();
1648
1649         /* Make sure the modem can wake us up */
1650         set_irq_type(GTA02_IRQ_MODEM, IRQ_TYPE_EDGE_RISING);
1651         rc = request_irq(GTA02_IRQ_MODEM, gta02_modem_irq, IRQF_DISABLED,
1652                          "modem", NULL);
1653         if (rc < 0)
1654                 printk(KERN_ERR "GTA02: can't request GSM modem wakeup IRQ\n");
1655         enable_irq_wake(GTA02_IRQ_MODEM);
1656
1657         /* Make sure the wifi module can wake us up*/
1658         set_irq_type(GTA02_IRQ_WLAN_GPIO1, IRQ_TYPE_EDGE_RISING);
1659         rc = request_irq(GTA02_IRQ_WLAN_GPIO1, ar6000_wow_irq, IRQF_DISABLED,
1660                         "ar6000", NULL);
1661
1662         if (rc < 0)
1663                 printk(KERN_ERR "GTA02: can't request ar6k wakeup IRQ\n");
1664         enable_irq_wake(GTA02_IRQ_WLAN_GPIO1);
1665
1666         pm_power_off = gta02_poweroff;
1667
1668         /* Register the HDQ and vibrator as children of pwm device */
1669 #ifdef CONFIG_HDQ_GPIO_BITBANG
1670         gta02_hdq_device.dev.parent = &s3c24xx_pwm_device.dev;
1671         platform_device_register(&gta02_hdq_device);
1672 #endif
1673 #ifdef CONFIG_LEDS_GTA02_VIBRATOR
1674         gta02_vibrator_dev.dev.parent = &s3c24xx_pwm_device.dev;
1675         platform_device_register(&gta02_vibrator_dev);
1676 #endif
1677 }
1678
1679 void DEBUG_LED(int n)
1680 {
1681         switch (n) {
1682         case 0:
1683                 gta02_gpb_setpin(GTA02_GPIO_PWR_LED1, 1);
1684                 break;
1685         case 1:
1686                 gta02_gpb_setpin(GTA02_GPIO_PWR_LED2, 1);
1687                 break;
1688         default:
1689                 gta02_gpb_setpin(GTA02_GPIO_AUX_LED, 1);
1690                 break;
1691         }
1692 }
1693 EXPORT_SYMBOL_GPL(DEBUG_LED);
1694
1695 MACHINE_START(NEO1973_GTA02, "GTA02")
1696         .phys_io        = S3C2410_PA_UART,
1697         .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
1698         .boot_params    = S3C2410_SDRAM_PA + 0x100,
1699         .map_io         = gta02_map_io,
1700         .init_irq       = s3c24xx_init_irq,
1701         .init_machine   = gta02_machine_init,
1702         .timer          = &s3c24xx_timer,
1703 MACHINE_END