target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c

   1 /*
   2  *  Buffalo WHR-G300N board support
   3  *
   4  *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify it
   7  *  under the terms of the GNU General Public License version 2 as published
   8  *  by the Free Software Foundation.
   9  */
  10
  11 #include <linux/init.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/mtd/mtd.h>
  14 #include <linux/mtd/partitions.h>
  15 #include <linux/mtd/physmap.h>
  16 #include <linux/leds.h>
  17
  18 #include <asm/mips_machine.h>
  19 #include <asm/mach-ralink/machine.h>
  20 #include <asm/mach-ralink/dev_gpio_leds.h>
  21
  22 #include "devices.h"
  23
  24 #define WHR_G300N_GPIO_LED_DIAG         7
  25 #define WHR_G300N_GPIO_LED_ROUTER       9
  26 #define WHR_G300N_GPIO_LED_SECURITY     14
  27
  28 #ifdef CONFIG_MTD_PARTITIONS
  29 static struct mtd_partition whr_g300n_partitions[] = {
  30         {
  31                 .name   = "u-boot",
  32                 .offset = 0,
  33                 .size   = 0x030000,
  34                 .mask_flags = MTD_WRITEABLE,
  35         }, {
  36                 .name   = "u-boot-env",
  37                 .offset = 0x030000,
  38                 .size   = 0x010000,
  39                 .mask_flags = MTD_WRITEABLE,
  40         }, {
  41                 .name   = "factory",
  42                 .offset = 0x040000,
  43                 .size   = 0x010000,
  44                 .mask_flags = MTD_WRITEABLE,
  45         }, {
  46                 .name   = "kernel",
  47                 .offset = 0x050000,
  48                 .size   = 0x090000,
  49         }, {
  50                 .name   = "rootfs",
  51                 .offset = 0x140000,
  52                 .size   = 0x2B0000,
  53         }, {
  54                 .name   = "user",
  55                 .offset = 0x3f0000,
  56                 .size   = 0x010000,
  57         }, {
  58                 .name   = "openwrt",
  59                 .offset = 0x050000,
  60                 .size   = 0x3a0000,
  61         }
  62 };
  63 #endif /* CONFIG_MTD_PARTITIONS */
  64
  65 static struct physmap_flash_data whr_g300n_flash_data = {
  66 #ifdef CONFIG_MTD_PARTITIONS
  67         .nr_parts       = ARRAY_SIZE(whr_g300n_partitions),
  68         .parts          = whr_g300n_partitions,
  69 #endif
  70 };
  71
  72 static struct gpio_led whr_g300n_leds_gpio[] __initdata = {
  73         {
  74                 .name           = "whr-g300n:red:diag",
  75                 .gpio           = WHR_G300N_GPIO_LED_DIAG,
  76                 .active_low     = 1,
  77         }, {
  78                 .name           = "whr-g300n:green:router",
  79                 .gpio           = WHR_G300N_GPIO_LED_ROUTER,
  80                 .active_low     = 1,
  81         }, {
  82                 .name           = "whr-g300n:amber:security",
  83                 .gpio           = WHR_G300N_GPIO_LED_SECURITY,
  84                 .active_low     = 1,
  85         }
  86 };
  87
  88 static void __init whr_g300n_init(void)
  89 {
  90         rt305x_register_flash(0, &whr_g300n_flash_data);
  91
  92         ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio),
  93                                   whr_g300n_leds_gpio);
  94 }
  95
  96 MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "Buffalo WHR-G300N", whr_g300n_init);