3 /include/ "rt3883.dtsi"
6 compatible = "BR-6475ND", "ralink,rt3883-soc";
7 model = "Edimax BR-6475nD";
10 state_default: pinctrl0 {
12 ralink,group = "spi", "jtag", "uartf";
13 ralink,function = "gpio";
36 ralink,fixed-link = <1000 1 1 1>;
43 pinctrl-names = "default";
44 pinctrl-0 = <&pci_pins>;
48 ralink,function = "pci-fnc";
56 compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
57 reg = < 0x10000 0 0 0 0 >;
58 ralink,eeprom = "soc_wmac.eeprom";
73 compatible = "cfi-flash";
74 reg = <0x1c000000 0x800000>;
81 reg = <0x00000000 0x00030000>;
87 reg = <0x00030000 0x00010000>;
92 factory: partition@40000 {
93 reg = <0x00040000 0x00010000>;
99 reg = <0x00050000 0x00020000>;
105 reg = <0x00070000 0x00790000>;
110 reg = <0x00270000 0x00590000>;
116 compatible = "realtek,rtl8367";
117 gpio-sda = <&gpio0 5 0>;
118 gpio-sck = <&gpio0 4 0>;
119 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
123 compatible = "gpio-keys-polled";
124 #address-cells = <1>;
126 poll-interval = <100>;
129 gpios = <&gpio0 7 1>;
130 linux,code = <0x198>;
134 gpios = <&gpio0 9 1>;
135 linux,input-type = <5>;
141 compatible = "gpio-leds";
144 label = "edimax:green:power";
145 gpios = <&gpio0 10 1>;
148 label = "edimax:amber:wlan";
149 gpios = <&gpio0 11 1>;
152 label = "edimax:amber:wlan_5ghz";
153 gpios = <&gpio0 14 1>;
157 /* Unclear if this is the correct gpio setup; the USB ports are
158 unpopulated on a stock BR-6475nD, even though the hardware exists
159 and the headers are there. */
162 compatible = "gpio-export";
165 gpio-export,name="usb";
166 gpio-export,output=<0>;
167 gpios = <&gpio0 19 0>;