ramips: ethernet mac cleanup
[openwrt.git] / target / linux / ramips / dts / ALL5003.dts
1 /dts-v1/;
2
3 /include/ "rt5350.dtsi"
4
5 / {
6         compatible = "ALL5003", "ralink,rt5350-soc";
7         model = "Allnet ALL5003";
8
9         palmbus@10000000 {
10                 gpio0: gpio@600 {
11                         status = "okay";
12                 };
13
14                 spi@b00 {
15                         status = "okay";
16                         m25p80@0 {
17                                 #address-cells = <1>;
18                                 #size-cells = <1>;
19                                 compatible = "mx25l25635e";
20                                 reg = <0 0>;
21                                 linux,modalias = "m25p80", "mx25l25635e";
22                                 spi-max-frequency = <10000000>;
23
24                                 partition@0 {
25                                         label = "u-boot";
26                                         reg = <0x0 0x30000>;
27                                         read-only;
28                                 };
29
30                                 partition@30000 {
31                                         label = "u-boot-env";
32                                         reg = <0x30000 0x10000>;
33                                         read-only;
34                                 };
35
36                                 factory: partition@40000 {
37                                         label = "factory";
38                                         reg = <0x40000 0x10000>;
39                                         read-only;
40                                 };
41
42                                 partition@50000 {
43                                         label = "firmware";
44                                         reg = <0x50000 0x1fb0000>;
45                                 };
46                         };
47                 };
48         };
49
50         pinctrl {
51                 state_default: pinctrl0 {
52                         gpio {
53                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
54                                 ralink,function = "gpio";
55                         };
56                 };
57         };
58
59         ethernet@10100000 {
60                 mtd-mac-address = <&factory 0x28>;
61         };
62
63         esw@10110000 {
64                 ralink,portmap = <0x3f>;
65         };
66
67         wmac@10180000 {
68                 ralink,mtd-eeprom = <&factory 0>;
69         };
70
71         ehci@101c0000 {
72                 status = "okay";
73         };
74
75         ohci@101c1000 {
76                 status = "okay";
77         };
78
79         i2c-gpio {
80                 compatible = "i2c-gpio";
81
82                 gpios = <&gpio0 1 0 &gpio0 2 0>;
83                 i2c-gpio,delay-us = <10>;
84
85                 pcf0: iexp@38 {
86                         #gpio-cells = <2>;
87                         compatible = "inxp,pcf8574a";
88                         reg = <0x38>;
89                         gpio-controller;
90                 };
91
92                 hwmon@4b {
93                         compatible = "national,lm92";
94                         reg = <0x4b>;
95                 };
96         };
97
98         gpio-leds {
99                 compatible = "gpio-leds";
100                 ld1 {
101                         label = "allnet:green:ld1";
102                         gpios = <&pcf0 0 1>;
103                 };
104                 ld2 {
105                         label = "allnet:green:ld2";
106                         gpios = <&pcf0 1 1>;
107                 };
108         };
109 };