target/linux/ramips/dts/ALL0256N-4M.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "ALL0256N", "ralink,rt3050-soc";
   7         model = "Allnet ALL0256N";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,uartmux = "gpio";
  13                         ralink,wdtmux = <1>;
  14                 };
  15
  16                 gpio0: gpio@600 {
  17                         status = "okay";
  18                 };
  19
  20                 spi@b00 {
  21                         status = "okay";
  22                         m25p80@0 {
  23                                 #address-cells = <1>;
  24                                 #size-cells = <1>;
  25                                 compatible = "mx25l3205d";
  26                                 reg = <0 0>;
  27                                 linux,modalias = "m25p80", "mx25l3205d";
  28                                 spi-max-frequency = <10000000>;
  29
  30                                 partition@0 {
  31                                         label = "u-boot";
  32                                         reg = <0x0 0x30000>;
  33                                         read-only;
  34                                 };
  35
  36                                 partition@30000 {
  37                                         label = "u-boot-env";
  38                                         reg = <0x30000 0x10000>;
  39                                         read-only;
  40                                 };
  41
  42                                 factory: partition@40000 {
  43                                         label = "factory";
  44                                         reg = <0x40000 0x10000>;
  45                                         read-only;
  46                                 };
  47
  48                                 partition@50000 {
  49                                         label = "firmware";
  50                                         reg = <0x50000 0x3c8000>;
  51                                 };
  52                         };
  53                 };
  54         };
  55
  56         ethernet@10100000 {
  57                 status = "okay";
  58         };
  59
  60         esw@10110000 {
  61                 status = "okay";
  62                 ralink,portmap = <0x3f>;
  63         };
  64
  65         gpio-leds {
  66                 compatible = "gpio-leds";
  67                 rssilow {
  68                         label = "all0256n:green:rssilow";
  69                         gpios = <&gpio0 14 1>;
  70                 };
  71                 rssimed {
  72                         label = "all0256n:green:rssimed";
  73                         gpios = <&gpio0 12 1>;
  74                 };
  75                 rssihigh {
  76                         label = "all0256n:green:rssihigh";
  77                         gpios = <&gpio0 13 1>;
  78                 };
  79         };
  80
  81         gpio-keys-polled {
  82                 compatible = "gpio-keys-polled";
  83                 #address-cells = <1>;
  84                 #size-cells = <0>;
  85                 poll-interval = <20>;
  86                 reset {
  87                         label = "reset";
  88                         gpios = <&gpio0 0 1>;
  89                         linux,code = <0x198>;
  90                 };
  91         };
  92
  93         wmac@10180000 {
  94                 status = "okay";
  95         };
  96 };