target/linux/pxa/patches-2.6.21/027-ucb1400-ac97-audio.patch

   1 --- a/sound/pci/ac97/ac97_codec.c
   2 +++ b/sound/pci/ac97/ac97_codec.c
   3 @@ -158,7 +158,7 @@ static const struct ac97_codec_id snd_ac
   4  { 0x4e534300, 0xffffffff, "LM4540,43,45,46,48",        NULL,           NULL }, // only guess --jk
   5  { 0x4e534331, 0xffffffff, "LM4549",            NULL,           NULL },
   6  { 0x4e534350, 0xffffffff, "LM4550",            patch_lm4550,   NULL }, // volume wrap fix
   7 -{ 0x50534304, 0xffffffff, "UCB1400",           patch_ucb1400,  NULL },
   8 +{ 0x50534304, 0xffffffff, "UCB1400",           patch_ucb1400,  NULL, AC97_HAS_NO_STD_PCM },
   9  { 0x53494c20, 0xffffffe0, "Si3036,8",          mpatch_si3036,  mpatch_si3036, AC97_MODEM_PATCH },
  10  { 0x54524102, 0xffffffff, "TR28022",           NULL,           NULL },
  11  { 0x54524106, 0xffffffff, "TR28026",           NULL,           NULL },
  12 --- a/sound/pci/ac97/ac97_patch.c
  13 +++ b/sound/pci/ac97/ac97_patch.c
  14 @@ -29,6 +29,10 @@
  15  #include <linux/slab.h>
  16  #include <linux/mutex.h>
  17
  18 +#include <linux/proc_fs.h>
  19 +#include <linux/string.h>
  20 +#include <linux/ctype.h>
  21 +
  22  #include <sound/core.h>
  23  #include <sound/pcm.h>
  24  #include <sound/control.h>
  25 @@ -406,6 +410,227 @@ int patch_yamaha_ymf753(struct snd_ac97
  26  }
  27
  28  /*
  29 + * UCB1400 codec
  30 + */
  31 +
  32 +#define AC97_UCB1400_FCSR1     0x6a
  33 +#define AC97_UCB1400_FCSR2     0x6c
  34 +
  35 +static const struct snd_kcontrol_new ucb1400_snd_ac97_controls[] = {
  36 +       AC97_SINGLE("Tone Control - Bass", AC97_UCB1400_FCSR1, 11, 4, 0),
  37 +       AC97_SINGLE("Tone Control - Treble", AC97_UCB1400_FCSR1, 9, 2, 0),
  38 +       AC97_SINGLE("Headphone Playback Switch", AC97_UCB1400_FCSR1, 6, 1, 0),
  39 +       AC97_SINGLE("De-emphasis", AC97_UCB1400_FCSR1, 5, 1, 0),
  40 +       AC97_SINGLE("DC Filter", AC97_UCB1400_FCSR1, 4, 1, 0),
  41 +       AC97_SINGLE("Hi-pass Filter", AC97_UCB1400_FCSR1, 3, 1, 0),
  42 +       AC97_SINGLE("ADC Filter", AC97_UCB1400_FCSR2, 12, 1, 0),
  43 +};
  44 +
  45 +#define NUM_GPIO_LINES 10
  46 +
  47 +static struct proc_dir_entry *proc_gpio_parent;
  48 +static struct proc_dir_entry *proc_gpios[NUM_GPIO_LINES];
  49 +
  50 +typedef struct
  51 +{
  52 +       int                     gpio;
  53 +       char                    name[32];
  54 +       struct snd_ac97         *ac97;
  55 +} gpio_summary_type;
  56 +
  57 +static gpio_summary_type gpio_summaries[NUM_GPIO_LINES] =
  58 +{
  59 +       { 0,    "UCB1400-0-0" },
  60 +       { 1,    "UCB1400-0-1" },
  61 +       { 2,    "UCB1400-0-2" },
  62 +       { 3,    "UCB1400-0-3" },
  63 +       { 4,    "UCB1400-0-4" },
  64 +       { 5,    "UCB1400-0-5" },
  65 +       { 6,    "UCB1400-0-6" },
  66 +       { 7,    "UCB1400-0-7" },
  67 +       { 8,    "UCB1400-0-8" },
  68 +       { 9,    "UCB1400-0-9" }
  69 +};
  70 +
  71 +
  72 +static int proc_ucb1400_ac97_gpio_write(struct file *file, const char __user *buf,
  73 +                        unsigned long count, void *data)
  74 +{
  75 +    char *cur, lbuf[count + 1];
  76 +    gpio_summary_type *summary = data;
  77 +    u32 direction_is_out, operation_is_set;
  78 +    int i = summary->gpio;
  79 +    u16 dir, value;
  80 +
  81 +    if (!capable(CAP_SYS_ADMIN))
  82 +            return -EACCES;
  83 +
  84 +    memset(lbuf, 0, count + 1);
  85 +
  86 +    if (copy_from_user(lbuf, buf, count))
  87 +            return -EFAULT;
  88 +
  89 +    cur = lbuf;
  90 +
  91 +    // Get current values
  92 +    direction_is_out = !!(snd_ac97_read(summary->ac97, 0x5c) & (0x0001 << i));
  93 +    operation_is_set = !!(snd_ac97_read(summary->ac97, 0x5a) & (0x0001 << i));
  94 +    while(1)
  95 +    {
  96 +            // We accept options: {GPIO|AF1|AF2|AF3}, {set|clear}, {in|out}
  97 +            // Anything else is an error
  98 +            while(cur[0] && (isspace(cur[0]) || ispunct(cur[0]))) cur = &(cur[1]);
  99 +
 100 +            if('\0' == cur[0]) break;
 101 +
 102 +            // Ok, so now we're pointing at the start of something
 103 +            switch(cur[0])
 104 +            {
 105 +                    case 'G':
 106 +                            // Check that next is "PIO" -- '\0' will cause safe short-circuit if end of buf
 107 +                            if(!(cur[1] == 'P' && cur[2] == 'I' && cur[3] == 'O')) goto parse_error;
 108 +                            cur = &(cur[4]);
 109 +                            break;
 110 +                    case 's':
 111 +                            if(!(cur[1] == 'e' && cur[2] == 't')) goto parse_error;
 112 +                            operation_is_set = 1;
 113 +                            cur = &(cur[3]);
 114 +                            break;
 115 +                    case 'c':
 116 +                            if(!(cur[1] == 'l' && cur[2] == 'e' && cur[3] == 'a' && cur[4] == 'r')) goto
 117 +parse_error;
 118 +                            operation_is_set = 0;
 119 +                            cur = &(cur[5]);
 120 +                            break;
 121 +                    case 'i':
 122 +                            if(!(cur[1] == 'n')) goto parse_error;
 123 +                            direction_is_out = 0;
 124 +                            cur = &(cur[2]);
 125 +                            break;
 126 +                    case 'o':
 127 +                            if(!(cur[1] == 'u' && cur[2] == 't')) goto parse_error;
 128 +                            direction_is_out = 1;
 129 +                            cur = &(cur[3]);
 130 +                            break;
 131 +                    default: goto parse_error;
 132 +            }
 133 +    }
 134 +
 135 +    // set/get value
 136 +    dir = snd_ac97_read(summary->ac97, 0x5c);
 137 +    value = snd_ac97_read(summary->ac97, 0x5a);
 138 +    if (direction_is_out)
 139 +    {
 140 +            dir |= 0x0001 << i;
 141 +            if (operation_is_set)
 142 +            {
 143 +                    value |= 0x0001 << i;
 144 +            }
 145 +            else
 146 +            {
 147 +                    value &= ~(0x0001 << i);
 148 +            }
 149 +
 150 +            snd_ac97_write(summary->ac97, 0x5c, dir);
 151 +            snd_ac97_write(summary->ac97, 0x5a, value);
 152 +    }
 153 +    else // direction in
 154 +    {
 155 +            dir &= ~(0x0001 << i);
 156 +            snd_ac97_write(summary->ac97, 0x5c, dir);
 157 +            operation_is_set = snd_ac97_read(summary->ac97, 0x5a) & ~(0x0001 << i);
 158 +    }
 159 +
 160 +#ifdef CONFIG_PROC_GPIO_DEBUG
 161 +    printk(KERN_INFO "Set (%s,%s,%s) via /proc/gpio/%s\n",
 162 +                            "GPIO",
 163 +                            direction_is_out ? "out" : "in",
 164 +                            operation_is_set ? "set" : "clear",
 165 +                            summary->name);
 166 +#endif
 167 +
 168 +    return count;
 169 +
 170 +parse_error:
 171 +    printk(KERN_CRIT "Parse error: Expect \"GPIO|[set|clear]|[in|out] ...\"\n");
 172 +    return -EINVAL;
 173 +}
 174 +
 175 +static int proc_ucb1400_ac97_gpio_read(char *page, char **start, off_t off,
 176 +                    int count, int *eof, void *data)
 177 +{
 178 +    char *p = page;
 179 +    gpio_summary_type *summary = data;
 180 +    int len, i; /*, af;*/
 181 +    i = summary->gpio;
 182 +
 183 +    p += sprintf(p, "%d\t%s\t%s\t%s\n", i,
 184 +                    "GPIO",
 185 +                    (snd_ac97_read(summary->ac97, 0x5c) & (0x0001 << i)) ? "out" : "in",
 186 +                    (snd_ac97_read(summary->ac97, 0x5a) & (0x0001 << i)) ? "set" : "clear");
 187 +
 188 +    len = (p - page) - off;
 189 +
 190 +    if(len < 0)
 191 +    {
 192 +            len = 0;
 193 +    }
 194 +
 195 +    *eof = (len <= count) ? 1 : 0;
 196 +    *start = page + off;
 197 +
 198 +    return len;
 199 +}
 200 +
 201 +int patch_ucb1400(struct snd_ac97 * ac97)
 202 +{
 203 +       int err, i;
 204 +
 205 +       proc_gpio_parent = proc_mkdir("gpio", NULL);
 206 +       if(!proc_gpio_parent) return 0;
 207 +
 208 +       for(i=0; i < NUM_GPIO_LINES; i++)
 209 +       {
 210 +               proc_gpios[i] = create_proc_entry(gpio_summaries[i].name, 0644, proc_gpio_parent);
 211 +               if(proc_gpios[i])
 212 +               {
 213 +                       gpio_summaries[i].ac97 = ac97;
 214 +                       proc_gpios[i]->data = &gpio_summaries[i];
 215 +                       proc_gpios[i]->read_proc = proc_ucb1400_ac97_gpio_read;
 216 +                       proc_gpios[i]->write_proc = proc_ucb1400_ac97_gpio_write;
 217 +               }
 218 +       }
 219 +
 220 +       for(i = 0; i < ARRAY_SIZE(ucb1400_snd_ac97_controls); i++) {
 221 +               if((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&ucb1400_snd_ac97_controls[i], ac97))) < 0)
 222 +                       return err;
 223 +       }
 224 +
 225 +       snd_ac97_write_cache(ac97,  AC97_UCB1400_FCSR1,
 226 +                       (0 << 11) |     // 0 base boost
 227 +                       (0 << 9)  |     // 0 treble boost
 228 +                       (0 << 7)  |     // Mode = flat
 229 +                       (1 << 6)  |     // Headphones enable
 230 +                       (0 << 5)  |     // De-emphasis disabled
 231 +                       (1 << 4)  |     // DC filter enabled
 232 +                       (1 << 3)  |     // Hi-pass filter enabled
 233 +                       (0 << 2)  |     // disable interrupt signalling via GPIO_INT
 234 +                       (1 << 0)        // clear ADC overflow status if set
 235 +               );
 236 +
 237 +       snd_ac97_write_cache(ac97, AC97_UCB1400_FCSR2,
 238 +                       (0 << 15) |     // must be 0
 239 +                       (0 << 13) |     // must be 0
 240 +                       (1 << 12) |     // ADC filter enabled
 241 +                       (0 << 10) |     // must be 0
 242 +                       (0 << 4)  |     // Smart low power mode on neither Codec nor PLL
 243 +                       (0 << 0)        // must be 0
 244 +               );
 245 +
 246 +       return 0;
 247 +}
 248 +
 249 +/*
 250   * May 2, 2003 Liam Girdwood <liam.girdwood@wolfsonmicro.com>
 251   *  removed broken wolfson00 patch.
 252   *  added support for WM9705,WM9708,WM9709,WM9710,WM9711,WM9712 and WM9717.
 253 @@ -3408,41 +3633,3 @@ int patch_lm4550(struct snd_ac97 *ac97)
 254         ac97->res_table = lm4550_restbl;
 255         return 0;
 256  }
 257 -
 258 -/*
 259 - *  UCB1400 codec (http://www.semiconductors.philips.com/acrobat_download/datasheets/UCB1400-02.pdf)
 260 - */
 261 -static const struct snd_kcontrol_new snd_ac97_controls_ucb1400[] = {
 262 -/* enable/disable headphone driver which allows direct connection to
 263 -   stereo headphone without the use of external DC blocking
 264 -   capacitors */
 265 -AC97_SINGLE("Headphone Driver", 0x6a, 6, 1, 0),
 266 -/* Filter used to compensate the DC offset is added in the ADC to remove idle
 267 -   tones from the audio band. */
 268 -AC97_SINGLE("DC Filter", 0x6a, 4, 1, 0),
 269 -/* Control smart-low-power mode feature. Allows automatic power down
 270 -   of unused blocks in the ADC analog front end and the PLL. */
 271 -AC97_SINGLE("Smart Low Power Mode", 0x6c, 4, 3, 0),
 272 -};
 273 -
 274 -static int patch_ucb1400_specific(struct snd_ac97 * ac97)
 275 -{
 276 -       int idx, err;
 277 -       for (idx = 0; idx < ARRAY_SIZE(snd_ac97_controls_ucb1400); idx++)
 278 -               if ((err = snd_ctl_add(ac97->bus->card, snd_ctl_new1(&snd_ac97_controls_ucb1400[idx], ac97))) < 0)
 279 -                       return err;
 280 -       return 0;
 281 -}
 282 -
 283 -static struct snd_ac97_build_ops patch_ucb1400_ops = {
 284 -       .build_specific = patch_ucb1400_specific,
 285 -};
 286 -
 287 -int patch_ucb1400(struct snd_ac97 * ac97)
 288 -{
 289 -       ac97->build_ops = &patch_ucb1400_ops;
 290 -       /* enable headphone driver and smart low power mode by default */
 291 -       snd_ac97_write(ac97, 0x6a, 0x0050);
 292 -       snd_ac97_write(ac97, 0x6c, 0x0030);
 293 -       return 0;
 294 -}