target/linux/ppc40x/patches/006-magicboxv2.patch

   1 --- /dev/null
   2 +++ b/arch/powerpc/boot/cuboot-magicboxv2.c
   3 @@ -0,0 +1,69 @@
   4 +/*
   5 + * Old U-boot compatibility for Magicbox v2
   6 + *
   7 + * Author: Imre Kaloz <kaloz@openwrt.org>
   8 + *         Gabor Juhos <juhosg@openwrt.org>
   9 + *
  10 + * This program is free software; you can redistribute it and/or modify it
  11 + * under the terms of the GNU General Public License version 2 as published
  12 + * by the Free Software Foundation.
  13 + */
  14 +
  15 +#include "ops.h"
  16 +#include "io.h"
  17 +#include "dcr.h"
  18 +#include "stdio.h"
  19 +#include "4xx.h"
  20 +#include "44x.h"
  21 +#include "cuboot.h"
  22 +
  23 +#define TARGET_4xx
  24 +#define TARGET_405EP
  25 +#include "ppcboot.h"
  26 +
  27 +static bd_t bd;
  28 +
  29 +static void fixup_cf_card(void)
  30 +{
  31 +#define DCRN_CPC0_PCI_BASE     0xf9
  32 +#define CF_CS0_BASE    0xff100000
  33 +#define CF_CS1_BASE    0xff200000
  34 +
  35 +       /* Turn on PerWE instead of PCIsomething */
  36 +       mtdcr(DCRN_CPC0_PCI_BASE,
  37 +             mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
  38 +
  39 +       /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
  40 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR);
  41 +       mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
  42 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP);
  43 +       mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
  44 +
  45 +       /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
  46 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR);
  47 +       mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
  48 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP);
  49 +       mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
  50 +
  51 +#undef DCRN_CPC0_PCI_BASE
  52 +#undef CF_CS0_BASE
  53 +#undef CF_CS1_BASE
  54 +}
  55 +
  56 +static void magicboxv2_fixups(void)
  57 +{
  58 +       fixup_cf_card();
  59 +       ibm405ep_fixup_clocks(25000000);
  60 +       ibm4xx_sdram_fixup_memsize();
  61 +       dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
  62 +}
  63 +
  64 +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
  65 +               unsigned long r6, unsigned long r7)
  66 +{
  67 +       CUBOOT_INIT();
  68 +       platform_ops.fixups = magicboxv2_fixups;
  69 +       platform_ops.exit = ibm40x_dbcr_reset;
  70 +       fdt_init(_dtb_start);
  71 +       serial_console_init();
  72 +}
  73 --- /dev/null
  74 +++ b/arch/powerpc/boot/dts/magicboxv2.dts
  75 @@ -0,0 +1,281 @@
  76 +/*
  77 + * Device Tree Source for Magicbox v2
  78 + *
  79 + * Copyright 2008 Imre Kaloz <kaloz@openwrt.org>
  80 + * Copyright 2009 Gabor Juhos <juhosg@openwrt.org>
  81 + *
  82 + * Based on walnut.dts
  83 + *
  84 + * This file is licensed under the terms of the GNU General Public
  85 + * License version 2.  This program is licensed "as is" without
  86 + * any warranty of any kind, whether express or implied.
  87 + */
  88 +
  89 +/dts-v1/;
  90 +
  91 +/ {
  92 +       #address-cells = <1>;
  93 +       #size-cells = <1>;
  94 +       model = "magicboxv2";
  95 +       compatible = "magicboxv2";
  96 +       dcr-parent = <&{/cpus/cpu@0}>;
  97 +
  98 +       aliases {
  99 +               ethernet0 = &EMAC0;
 100 +               ethernet1 = &EMAC1;
 101 +               serial0 = &UART0;
 102 +               serial1 = &UART1;
 103 +       };
 104 +
 105 +       cpus {
 106 +               #address-cells = <1>;
 107 +               #size-cells = <0>;
 108 +
 109 +               cpu@0 {
 110 +                       device_type = "cpu";
 111 +                       model = "PowerPC,405EP";
 112 +                       reg = <0x00000000>;
 113 +                       clock-frequency = <0xbebc200>; /* Filled in by zImage */
 114 +                       timebase-frequency = <0>; /* Filled in by zImage */
 115 +                       i-cache-line-size = <20>;
 116 +                       d-cache-line-size = <20>;
 117 +                       i-cache-size = <4000>;
 118 +                       d-cache-size = <4000>;
 119 +                       dcr-controller;
 120 +                       dcr-access-method = "native";
 121 +               };
 122 +       };
 123 +
 124 +       memory {
 125 +               device_type = "memory";
 126 +               reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 127 +       };
 128 +
 129 +       UIC0: interrupt-controller {
 130 +               compatible = "ibm,uic";
 131 +               interrupt-controller;
 132 +               cell-index = <0>;
 133 +               dcr-reg = <0x0c0 0x009>;
 134 +               #address-cells = <0>;
 135 +               #size-cells = <0>;
 136 +               #interrupt-cells = <2>;
 137 +       };
 138 +
 139 +       plb {
 140 +               compatible = "ibm,plb3";
 141 +               #address-cells = <1>;
 142 +               #size-cells = <1>;
 143 +               ranges;
 144 +               clock-frequency = <0>; /* Filled in by zImage */
 145 +
 146 +               SDRAM0: memory-controller {
 147 +                       compatible = "ibm,sdram-405ep";
 148 +                       dcr-reg = <0x010 0x002>;
 149 +               };
 150 +
 151 +               MAL: mcmal {
 152 +                       compatible = "ibm,mcmal-405ep", "ibm,mcmal";
 153 +                       dcr-reg = <0x180 0x062>;
 154 +                       num-tx-chans = <4>;
 155 +                       num-rx-chans = <2>;
 156 +                       interrupt-parent = <&UIC0>;
 157 +                       interrupts = <
 158 +                               0xb 0x4 /* TXEOB */
 159 +                               0xc 0x4 /* RXEOB */
 160 +                               0xa 0x4 /* SERR */
 161 +                               0xd 0x4 /* TXDE */
 162 +                               0xe 0x4 /* RXDE */>;
 163 +               };
 164 +
 165 +               POB0: opb {
 166 +                       compatible = "ibm,opb-405ep", "ibm,opb";
 167 +                       #address-cells = <1>;
 168 +                       #size-cells = <1>;
 169 +                       ranges = <0xef600000 0xef600000 0x00a00000>;
 170 +                       dcr-reg = <0x0a0 0x005>;
 171 +                       clock-frequency = <0>; /* Filled in by zImage */
 172 +
 173 +                       UART0: serial@ef600300 {
 174 +                               device_type = "serial";
 175 +                               compatible = "ns16550";
 176 +                               reg = <0xef600300 0x00000008>;
 177 +                               virtual-reg = <0xef600300>;
 178 +                               clock-frequency = <0>; /* Filled in by zImage */
 179 +                               current-speed = <115200>;
 180 +                               interrupt-parent = <&UIC0>;
 181 +                               interrupts = <0x0 0x4>;
 182 +                       };
 183 +
 184 +                       UART1: serial@ef600400 {
 185 +                               device_type = "serial";
 186 +                               compatible = "ns16550";
 187 +                               reg = <0xef600400 0x00000008>;
 188 +                               virtual-reg = <0xef600400>;
 189 +                               clock-frequency = <0>; /* Filled in by zImage */
 190 +                               current-speed = <115200>;
 191 +                               interrupt-parent = <&UIC0>;
 192 +                               interrupts = <0x1 0x4>;
 193 +                       };
 194 +
 195 +                       IIC: i2c@ef600500 {
 196 +                               compatible = "ibm,iic-405ep", "ibm,iic";
 197 +                               #address-cells = <1>;
 198 +                               #size-cells = <0>;
 199 +                               reg = <0xef600500 0x00000011>;
 200 +                               interrupt-parent = <&UIC0>;
 201 +                               interrupts = <0x2 0x4>;
 202 +
 203 +                               dtt@48 {
 204 +                                       compatible = "national,lm75";
 205 +                                       reg = <0x48>;
 206 +                               };
 207 +
 208 +                               eeprom@50 {
 209 +                                       compatible = "at24,24c16";
 210 +                                       reg = <0x50>;
 211 +                               };
 212 +                       };
 213 +
 214 +                       GPIO0: gpio-controller@ef600700 {
 215 +                               compatible = "ibm,ppc4xx-gpio";
 216 +                               reg = <0xef600700 0x00000020>;
 217 +                               #gpio-cells = <2>;
 218 +                               gpio-controller;
 219 +                       };
 220 +
 221 +                       EMAC0: ethernet@ef600800 {
 222 +                               linux,network-index = <0x0>;
 223 +                               device_type = "network";
 224 +                               compatible = "ibm,emac-405ep", "ibm,emac";
 225 +                               interrupt-parent = <&UIC0>;
 226 +                               interrupts = <
 227 +                                       0xf 0x4 /* Ethernet */
 228 +                                       0x9 0x4 /* Ethernet Wake Up */>;
 229 +                               local-mac-address = [000000000000]; /* Filled in by zImage */
 230 +                               reg = <0xef600800 0x00000070>;
 231 +                               mal-device = <&MAL>;
 232 +                               mal-tx-channel = <0>;
 233 +                               mal-rx-channel = <0>;
 234 +                               cell-index = <0>;
 235 +                               max-frame-size = <0x5dc>;
 236 +                               rx-fifo-size = <0x1000>;
 237 +                               tx-fifo-size = <0x800>;
 238 +                               phy-mode = "mii";
 239 +                               phy-map = <0x00000000>;
 240 +                       };
 241 +
 242 +                       EMAC1: ethernet@ef600900 {
 243 +                               linux,network-index = <0x1>;
 244 +                               device_type = "network";
 245 +                               compatible = "ibm,emac-405ep", "ibm,emac";
 246 +                               interrupt-parent = <&UIC0>;
 247 +                               interrupts = <
 248 +                                       0x11 0x4 /* Ethernet */
 249 +                                       0x09 0x4 /* Ethernet Wake Up */>;
 250 +                               local-mac-address = [000000000000]; /* Filled in by zImage */
 251 +                               reg = <0xef600900 0x00000070>;
 252 +                               mal-device = <&MAL>;
 253 +                               mal-tx-channel = <2>;
 254 +                               mal-rx-channel = <1>;
 255 +                               cell-index = <1>;
 256 +                               max-frame-size = <0x5dc>;
 257 +                               rx-fifo-size = <0x1000>;
 258 +                               tx-fifo-size = <0x800>;
 259 +                               mdio-device = <&EMAC0>;
 260 +                               phy-mode = "mii";
 261 +                               phy-map = <0x00000001>;
 262 +                       };
 263 +
 264 +                       leds {
 265 +                               compatible = "gpio-leds";
 266 +                               user {
 267 +                                       label = "magicbox:red:user";
 268 +                                       gpios = <&GPIO0 2 1>;
 269 +                               };
 270 +                       };
 271 +               };
 272 +
 273 +               EBC0: ebc {
 274 +                       compatible = "ibm,ebc-405ep", "ibm,ebc";
 275 +                       dcr-reg = <0x012 0x002>;
 276 +                       #address-cells = <2>;
 277 +                       #size-cells = <1>;
 278 +                       /* The ranges property is supplied by the bootwrapper
 279 +                        * and is based on the firmware's configuration of the
 280 +                        * EBC bridge
 281 +                        */
 282 +                       clock-frequency = <0>; /* Filled in by zImage */
 283 +
 284 +                       cf_card@ff100000 {
 285 +                               compatible = "magicbox-cf", "pata-magicbox-cf";
 286 +                               reg = <0x00000000 0xff100000 0x00001000
 287 +                                      0x00000000 0xff200000 0x00001000>;
 288 +                               interrupt-parent = <&UIC0>;
 289 +                               interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >;
 290 +                       };
 291 +
 292 +                       nor_flash@ffc00000 {
 293 +                               compatible = "cfi-flash";
 294 +                               bank-width = <2>;
 295 +                               reg = <0x00000000 0xffc00000 0x00400000>;
 296 +                               #address-cells = <1>;
 297 +                               #size-cells = <1>;
 298 +                               partition@0 {
 299 +                                       label = "linux";
 300 +                                       reg = <0x0 0x120000>;
 301 +                               };
 302 +                               partition@120000 {
 303 +                                       label = "rootfs";
 304 +                                       reg = <0x120000 0x2a0000>;
 305 +                               };
 306 +                               partition@3c0000 {
 307 +                                       label = "u-boot";
 308 +                                       reg = <0x3c0000 0x30000>;
 309 +                                       read-only;
 310 +                               };
 311 +                       };
 312 +               };
 313 +
 314 +               PCI0: pci@ec000000 {
 315 +                       device_type = "pci";
 316 +                       #interrupt-cells = <1>;
 317 +                       #size-cells = <2>;
 318 +                       #address-cells = <3>;
 319 +                       compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
 320 +                       primary;
 321 +                       reg = <0xeec00000 0x00000008    /* Config space access */
 322 +                              0xeed80000 0x00000004    /* IACK */
 323 +                              0xeed80000 0x00000004    /* Special cycle */
 324 +                              0xef480000 0x00000040>;  /* Internal registers */
 325 +
 326 +                       /* Outbound ranges, one memory and one IO,
 327 +                        * later cannot be changed. Chip supports a second
 328 +                        * IO range but we don't use it for now
 329 +                        */
 330 +                       ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
 331 +                                 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 332 +
 333 +                       /* Inbound 2GB range starting at 0 */
 334 +                       dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 335 +
 336 +                       interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 337 +                       interrupt-map = <
 338 +                               /* IDSEL 1 */
 339 +                               0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 340 +
 341 +                               /* IDSEL 2 */
 342 +                               0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
 343 +
 344 +                               /* IDSEL 3 */
 345 +                               0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
 346 +
 347 +                               /* IDSEL 4 */
 348 +                               0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
 349 +                       >;
 350 +               };
 351 +       };
 352 +
 353 +       chosen {
 354 +               linux,stdout-path = "/plb/opb/serial@ef600300";
 355 +       };
 356 +};
 357 --- a/arch/powerpc/boot/Makefile
 358 +++ b/arch/powerpc/boot/Makefile
 359 @@ -70,7 +70,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
 360                 cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 361                 cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 362                 virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
 363 -               cuboot-acadia.c cuboot-magicboxv1.c
 364 +               cuboot-acadia.c cuboot-magicboxv1.c cuboot-magicboxv2.c
 365  src-boot := $(src-wlib) $(src-plat) empty.c
 366
 367  src-boot := $(addprefix $(obj)/, $(src-boot))
 368 @@ -215,6 +215,7 @@ image-$(CONFIG_EP405)                       += dtbImage.ep40
 369  image-$(CONFIG_WALNUT)                 += treeImage.walnut
 370  image-$(CONFIG_ACADIA)                 += cuImage.acadia
 371  image-$(CONFIG_MAGICBOXV1)             += cuImage.magicboxv1
 372 +image-$(CONFIG_MAGICBOXV2)             += cuImage.magicboxv2
 373
 374  # Board ports in arch/powerpc/platform/44x/Kconfig
 375  image-$(CONFIG_EBONY)                  += treeImage.ebony cuImage.ebony
 376 --- a/arch/powerpc/platforms/40x/Kconfig
 377 +++ b/arch/powerpc/platforms/40x/Kconfig
 378 @@ -59,6 +59,16 @@ config MAGICBOXV1
 379         help
 380           This option enables support for the Magicbox v1 board.
 381
 382 +config MAGICBOXV2
 383 +       bool "Magicbox v2"
 384 +       depends on 40x
 385 +       default n
 386 +       select PPC40x_SIMPLE
 387 +       select 405EP
 388 +       select PCI
 389 +       help
 390 +         This option enables support for the Magicbox v2 board.
 391 +
 392  config MAKALU
 393         bool "Makalu"
 394         depends on 40x
 395 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c
 396 +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
 397 @@ -52,7 +52,8 @@ machine_device_initcall(ppc40x_simple, p
 398   */
 399  static char *board[] __initdata = {
 400         "amcc,acadia",
 401 -       "magicboxv1"
 402 +       "magicboxv1",
 403 +       "magicboxv2",
 404  };
 405
 406  static int __init ppc40x_probe(void)