target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts

   1 /*
   2  * Device Tree file for the Linksys WRT3200ACM (Rango)
   3  *
   4  * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
   5  *
   6  *
   7  * This file is dual-licensed: you can use it either under the terms
   8  * of the GPL or the X11 license, at your option. Note that this dual
   9  * licensing only applies to this file, and not this project as a
  10  * whole.
  11  *
  12  *  a) This file is licensed under the terms of the GNU General Public
  13  *     License version 2.  This program is licensed "as is" without
  14  *     any warranty of any kind, whether express or implied.
  15  *
  16  * Or, alternatively,
  17  *
  18  *  b) Permission is hereby granted, free of charge, to any person
  19  *     obtaining a copy of this software and associated documentation
  20  *     files (the "Software"), to deal in the Software without
  21  *     restriction, including without limitation the rights to use,
  22  *     copy, modify, merge, publish, distribute, sublicense, and/or
  23  *     sell copies of the Software, and to permit persons to whom the
  24  *     Software is furnished to do so, subject to the following
  25  *     conditions:
  26  *
  27  *     The above copyright notice and this permission notice shall be
  28  *     included in all copies or substantial portions of the Software.
  29  *
  30  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  31  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  32  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  33  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  34  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  35  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  36  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  37  *     OTHER DEALINGS IN THE SOFTWARE.
  38  */
  39
  40 /dts-v1/;
  41 #include <dt-bindings/gpio/gpio.h>
  42 #include <dt-bindings/input/input.h>
  43 #include "armada-385.dtsi"
  44
  45 / {
  46         model = "Linksys WRT3200ACM";
  47         compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
  48                      "marvell,armada380";
  49
  50         chosen {
  51                 stdout-path = "serial0:115200n8";
  52         };
  53
  54         memory {
  55                 device_type = "memory";
  56                 reg = <0x00000000 0x20000000>; /* 512 MB */
  57         };
  58
  59         soc {
  60                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
  61                           MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
  62                           MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
  63                           MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
  64                           MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
  65
  66                 internal-regs {
  67
  68                         spi@10600 {
  69                                 status = "disabled";
  70                         };
  71
  72                         i2c@11000 {
  73                                 pinctrl-names = "default";
  74                                 pinctrl-0 = <&i2c0_pins>;
  75                                 status = "okay";
  76
  77                                 tmp421@4c {
  78                                         compatible = "ti,tmp421";
  79                                         reg = <0x4c>;
  80                                 };
  81
  82                                 pca9635@68 {
  83                                         #address-cells = <1>;
  84                                         #size-cells = <0>;
  85                                         compatible = "nxp,pca9635";
  86                                         reg = <0x68>;
  87
  88                                         wan_amber@0 {
  89                                                 label = "rango:amber:wan";
  90                                                 reg = <0x0>;
  91                                         };
  92
  93                                         wan_white@1 {
  94                                                 label = "rango:white:wan";
  95                                                 reg = <0x1>;
  96                                         };
  97
  98                                         wlan_2g@2 {
  99                                                 label = "rango:white:wlan_2g";
 100                                                 reg = <0x2>;
 101                                         };
 102
 103                                         wlan_5g@3 {
 104                                                 label = "rango:white:wlan_5g";
 105                                                 reg = <0x3>;
 106                                         };
 107
 108                                         usb2@5 {
 109                                                 label = "rango:white:usb2";
 110                                                 reg = <0x5>;
 111                                         };
 112
 113                                         usb3_1@6 {
 114                                                 label = "rango:white:usb3_1";
 115                                                 reg = <0x6>;
 116                                         };
 117
 118                                         usb3_2@7 {
 119                                                 label = "rango:white:usb3_2";
 120                                                 reg = <0x7>;
 121                                         };
 122
 123                                         wps_white@8 {
 124                                                 label = "rango:white:wps";
 125                                                 reg = <0x8>;
 126                                         };
 127
 128                                         wps_amber@9 {
 129                                                 label = "rango:amber:wps";
 130                                                 reg = <0x9>;
 131                                         };
 132                                 };
 133                         };
 134
 135                         /* J10: VCC, NC, RX, NC, TX, GND  */
 136                         serial@12000 {
 137                                 status = "okay";
 138                         };
 139
 140                         ethernet@70000 {
 141                                 status = "okay";
 142                                 phy-mode = "rgmii-id";
 143                                 fixed-link {
 144                                         speed = <1000>;
 145                                         full-duplex;
 146                                 };
 147                         };
 148
 149                         ethernet@34000 {
 150                                 status = "okay";
 151                                 phy-mode = "sgmii";
 152                                 fixed-link {
 153                                         speed = <1000>;
 154                                         full-duplex;
 155                                 };
 156                         };
 157
 158                         mdio {
 159                                 status = "okay";
 160                         };
 161
 162                         sata@a8000 {
 163                                 status = "okay";
 164                         };
 165
 166                         /* USB part of the eSATA/USB 2.0 port */
 167                         usb@58000 {
 168                                 status = "okay";
 169                         };
 170
 171                         usb3@f8000 {
 172                                 status = "okay";
 173                                 usb-phy = <&usb3_phy>;
 174                         };
 175
 176                         flash@d0000 {
 177                                 status = "okay";
 178                                 num-cs = <1>;
 179                                 marvell,nand-keep-config;
 180                                 marvell,nand-enable-arbiter;
 181                                 nand-on-flash-bbt;
 182
 183                                 partition@0 {
 184                                         label = "u-boot";
 185                                         reg = <0x0000000 0x200000>;  /* 2MB */
 186                                         read-only;
 187                                 };
 188
 189                                 partition@200000 {
 190                                         label = "u_env";
 191                                         reg = <0x200000 0x20000>;    /* 128KB */
 192                                 };
 193
 194                                 partition@220000 {
 195                                         label = "s_env";
 196                                         reg = <0x220000 0x40000>;    /* 256KB */
 197                                 };
 198
 199                                 partition@7e0000 {
 200                                         label = "devinfo";
 201                                         reg = <0x7e0000 0x1e0000>;   /* 1920KB */
 202                                         read-only;
 203                                 };
 204
 205                                 partition@820000 {
 206                                         label = "sysdiag";
 207                                         reg = <0x820000 0x40000>;   /* 256KB */
 208                                         read-only;
 209                                 };
 210
 211                                 /* kernel1 overlaps with rootfs1 by design */
 212                                 partition@a00000 {
 213                                         label = "kernel1";
 214                                         reg = <0xa00000 0x5000000>;  /* 80MB */
 215                                 };
 216
 217                                 partition@1000000 {
 218                                         label = "rootfs1";
 219                                         reg = <0x1000000 0x4a00000>;  /* 74MB */
 220                                 };
 221
 222                                 /* kernel2 overlaps with rootfs2 by design */
 223                                 partition@5a00000 {
 224                                         label = "kernel2";
 225                                         reg = <0x5a00000 0x5000000>; /* 80MB */
 226                                 };
 227
 228                                 partition@6000000 {
 229                                         label = "rootfs2";
 230                                         reg = <0x6000000 0x4a00000>; /* 74MB */
 231                                 };
 232
 233                                 /*
 234                                  * 86MB, last MB is for the BBT, not writable
 235                                  */
 236                                 partition@aa00000 {
 237                                         label = "syscfg";
 238                                         reg = <0x5a00000 0x5600000>;
 239                                 };
 240
 241                                 /*
 242                                  * Unused area between "s_env" and "devinfo".
 243                                  * Moved here because otherwise the renumbered
 244                                  * partitions would break the bootloader
 245                                  * supplied bootargs
 246                                  */
 247                                 partition@180000 {
 248                                         label = "unused_area";
 249                                         reg = <0x260000 0x580000>;   /* 5.6MB */
 250                                 };
 251                         };
 252                 };
 253
 254                 pcie-controller {
 255                         status = "okay";
 256
 257                         pcie@1,0 {
 258                                 /* Marvell 88W8964, 5GHz-only */
 259                                 status = "okay";
 260
 261                                 mwlwifi {
 262                                         marvell,2ghz = <0>;
 263                                         marvell,chainmask = <4 4>;
 264                                 };
 265
 266                         };
 267
 268                         pcie@2,0 {
 269                                 /* Marvell 88W8964, 2GHz-only */
 270                                 status = "okay";
 271
 272                                 mwlwifi {
 273                                         marvell,5ghz = <0>;
 274                                         marvell,chainmask = <4 4>;
 275                                 };
 276
 277                         };
 278                 };
 279         };
 280
 281         usb3_phy: usb3_phy {
 282                 compatible = "usb-nop-xceiv";
 283                 vcc-supply = <&reg_xhci0_vbus>;
 284         };
 285
 286         reg_xhci0_vbus: xhci0-vbus {
 287                 compatible = "regulator-fixed";
 288                 pinctrl-names = "default";
 289                 pinctrl-0 = <&xhci0_vbus_pins>;
 290                 regulator-name = "xhci0-vbus";
 291                 regulator-min-microvolt = <5000000>;
 292                 regulator-max-microvolt = <5000000>;
 293                 enable-active-high;
 294                 gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 295         };
 296
 297         gpio_keys {
 298                 compatible = "gpio-keys";
 299                 #address-cells = <1>;
 300                 #size-cells = <0>;
 301                 pinctrl-0 = <&keys_pin>;
 302                 pinctrl-names = "default";
 303
 304                 button@1 {
 305                         label = "WPS";
 306                         linux,code = <KEY_WPS_BUTTON>;
 307                         gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 308                 };
 309
 310                 button@2 {
 311                         label = "Factory Reset Button";
 312                         linux,code = <KEY_RESTART>;
 313                         gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 314                 };
 315         };
 316
 317         gpio-leds {
 318                 compatible = "gpio-leds";
 319                 pinctrl-0 = <&power_led_pin &sata_led_pin>;
 320                 pinctrl-names = "default";
 321
 322                 power {
 323                         gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
 324                         default-state = "on";
 325                 };
 326
 327                 sata {
 328                         gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 329                         default-state = "off";
 330                 };
 331         };
 332
 333         dsa@0 {
 334                 compatible = "marvell,dsa";
 335                 #address-cells = <2>;
 336                 #size-cells = <0>;
 337
 338                 dsa,ethernet = <&eth2>;
 339                 dsa,mii-bus = <&mdio>;
 340
 341                 switch@0 {
 342                         #address-cells = <1>;
 343                         #size-cells = <0>;
 344                         reg = <0x0 0>;  /* MDIO address 0, switch 0 in tree */
 345
 346                         port@0 {
 347                                 reg = <0>;
 348                                 label = "lan4";
 349                         };
 350
 351                         port@1 {
 352                                 reg = <1>;
 353                                 label = "lan3";
 354                         };
 355
 356                         port@2 {
 357                                 reg = <2>;
 358                                 label = "lan2";
 359                         };
 360
 361                         port@3 {
 362                                 reg = <3>;
 363                                 label = "lan1";
 364                         };
 365
 366                         port@4 {
 367                                 reg = <4>;
 368                                 label = "wan";
 369                         };
 370
 371                         port@5 {
 372                                 reg = <5>;
 373                                 label = "cpu";
 374                         };
 375                 };
 376         };
 377
 378         gpio-leds {
 379                 power {
 380                         label = "rango:white:power";
 381                 };
 382
 383                 sata {
 384                         label = "rango:white:sata";
 385                 };
 386         };
 387
 388         mvsw61xx {
 389                 #address-cells = <1>;
 390                 #size-cells = <0>;
 391                 compatible = "marvell,88e6352";
 392                 status = "okay";
 393                 reg = <0x10>;
 394
 395                 mii-bus = <&mdio>;
 396                 cpu-port-0 = <5>;
 397                 cpu-port-1 = <6>;
 398         };
 399
 400 };
 401
 402 &pinctrl {
 403         keys_pin: keys-pin {
 404                 marvell,pins = "mpp24", "mpp29";
 405                 marvell,function = "gpio";
 406         };
 407
 408         power_led_pin: power-led-pin {
 409                 marvell,pins = "mpp56";
 410                 marvell,function = "gpio";
 411         };
 412
 413         sata_led_pin: sata-led-pin {
 414                 marvell,pins = "mpp21";
 415                 marvell,function = "gpio";
 416         };
 417
 418         xhci0_vbus_pins: xhci0-vbus-pins {
 419                 marvell,pins = "mpp47";
 420                 marvell,function = "gpio";
 421         };
 422 };