5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
15 compatible = "lantiq,fpi", "simple-bus";
16 ranges = <0x0 0x10000000 0xEEFFFFF>;
17 reg = <0x10000000 0xEF00000>;
22 compatible = "lantiq,localbus", "simple-bus";
27 compatible = "lantiq,sflash";
28 reg = <0xE100800 0x100>;
34 reg = <0x00000 0x10000>;
39 reg = <0x10000 0x10000>;
44 reg = <0x20000 0x1d0000>;
48 gpio: pinmux@E100B10 {
49 compatible = "lantiq,pinctrl-xr9";
50 pinctrl-names = "default";
51 pinctrl-0 = <&state_default>;
53 interrupt-parent = <&icu0>;
54 interrupts = <166 135 66 40 41 42 38>;
58 reg = <0xE100B10 0xA0>;
60 state_default: pinmux {
62 lantiq,groups = "stp";
63 lantiq,function = "stp";
66 lantiq,groups = "spi", "spi_cs4";
67 lantiq,function = "spi";
70 lantiq,groups = "nand cle", "nand ale",
71 "nand rd", "nand rdy";
72 lantiq,function = "ebu";
75 lantiq,groups = "mdio";
76 lantiq,function = "mdio";
79 lantiq,groups = "gnt1", "req1";
80 lantiq,function = "pci";
83 lantiq,groups = "exin3";
84 lantiq,function = "exin";
87 lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
88 "io4", "io5", "io6", /* stp */
89 "io17", "io18", /* spi dout & clk */
91 "io38"; /* pcie-rst */
96 lantiq,pins = "io39", /* exin3 */
97 "io48"; /* nand rdy */
104 #address-cells = <1>;
106 compatible = "lantiq,xrx200-net";
107 reg = < 0xE108000 0x3000 /* switch */
108 0xE10B100 0x70 /* mdio */
109 0xE10B1D8 0x30 /* mii */
110 0xE10B308 0x30 /* pmac */
112 interrupt-parent = <&icu0>;
113 interrupts = <73 72>;
116 compatible = "lantiq,xrx200-pdi";
117 #address-cells = <1>;
120 mac-address = [ 00 11 22 33 44 55 ];
123 compatible = "lantiq,xrx200-pdi-port";
126 phy-handle = <&phy0>;
129 compatible = "lantiq,xrx200-pdi-port";
132 phy-handle = <&phy1>;
135 compatible = "lantiq,xrx200-pdi-port";
138 phy-handle = <&phy11>;
141 compatible = "lantiq,xrx200-pdi-port";
144 phy-handle = <&phy13>;
149 compatible = "lantiq,xrx200-pdi";
150 #address-cells = <1>;
153 mac-address = [ 00 11 22 33 44 56 ];
156 compatible = "lantiq,xrx200-pdi-port";
159 phy-handle = <&phy5>;
164 #address-cells = <1>;
166 compatible = "lantiq,xrx200-mdio";
167 phy0: ethernet-phy@0 {
169 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
170 lantiq,c45-reg-init = <1 0 0 0>;
172 phy1: ethernet-phy@1 {
174 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
175 lantiq,c45-reg-init = <1 0 0 0>;
177 phy5: ethernet-phy@5 {
179 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
180 lantiq,c45-reg-init = <1 0 0 0>;
182 phy11: ethernet-phy@11 {
184 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
185 lantiq,c45-reg-init = <1 0 0 0>;
187 phy13: ethernet-phy@13 {
189 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
190 lantiq,c45-reg-init = <1 0 0 0>;
196 compatible = "lantiq,gpio-stp-xway";
197 reg = <0xE100BB0 0x40>;
201 lantiq,shadow = <0xffff>;
202 lantiq,groups = <0x7>;
210 #address-cells = <3>;
212 #interrupt-cells = <1>;
213 compatible = "lantiq,pci-xway";
214 bus-range = <0x0 0x0>;
215 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
216 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
217 reg = <0x7000000 0x8000 /* config space */
218 0xE105400 0x400>; /* pci bridge */
219 lantiq,bus-clock = <33333333>;
220 /*lantiq,external-clock;*/
221 lantiq,delay-hi = <0>; /* 0ns delay */
222 lantiq,delay-lo = <0>; /* 0.0ns delay */
223 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
225 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
227 gpios-reset = <&gpio 21 0>;
228 req-mask = <0x1>; /* GNT1 */
233 compatible = "lantiq,ifxhcd";
234 interrupt-parent = <&icu0>;
235 interrupts = <62 91>;
239 compatible = "lantiq,phy-xrx200";
240 firmware = "lantiq/vr9_phy11g_a2x.bin";
245 compatible = "gpio-keys-polled";
246 #address-cells = <1>;
248 poll-interval = <100>;
252 linux,code = <0x100>;
256 gpios = <&gpio 11 1>;
257 linux,code = <0x100>;
262 compatible = "gpio-keys";
264 gpios = <&gpio 39 0>;
265 linux,code = <0x100>;
270 compatible = "gpio-leds";
275 default-state = "on";
280 default-state = "on";
285 default-state = "on";
290 default-state = "on";
295 default-state = "on";
300 default-state = "on";
305 default-state = "on";
310 default-state = "on";
315 default-state = "on";