5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 gpio: pinmux@E100B10 {
14 pinctrl-names = "default";
15 pinctrl-0 = <&state_default>;
17 state_default: pinmux {
19 lantiq,groups = "mdio";
20 lantiq,function = "mdio";
23 lantiq,groups = "gphy0 led1", "gphy1 led1";
24 lantiq,function = "gphy";
26 lantiq,open-drain = <0>;
32 lantiq,open-drain = <0>;
37 lantiq,open-drain = <1>;
41 lantiq,pins = "io10", "io17", "io18", "io21";
42 lantiq,open-drain = <0>;
56 compatible = "lantiq,xrx200-net";
57 reg = < 0xE108000 0x3000 /* switch */
58 0xE10B100 0x70 /* mdio */
59 0xE10B1D8 0x30 /* mii */
60 0xE10B308 0x30 /* pmac */
62 interrupt-parent = <&icu0>;
66 compatible = "lantiq,xrx200-pdi";
70 mtd-mac-address = <&ath9k_cal 0xf100>;
74 compatible = "lantiq,xrx200-pdi-port";
78 // gpios = <&gpio 42 1>;
81 compatible = "lantiq,xrx200-pdi-port";
87 compatible = "lantiq,xrx200-pdi-port";
90 phy-handle = <&phy11>;
93 compatible = "lantiq,xrx200-pdi-port";
96 phy-handle = <&phy13>;
101 #address-cells = <1>;
103 compatible = "lantiq,xrx200-mdio";
104 phy0: ethernet-phy@0 {
106 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
108 phy5: ethernet-phy@5 {
110 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
112 phy11: ethernet-phy@11 {
114 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
116 phy13: ethernet-phy@13 {
118 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
125 gpios = <&gpio 33 0>;
126 lantiq,portmask = <0x3>;
131 gpios = <&gpio 33 0>;
136 compatible = "lantiq,phy-xrx200";
137 firmware = "lantiq/vr9_phy11g_a2x.bin";
142 compatible = "lantiq,pcie-xway";
146 #address-cells = <1>;
149 compatible = "spi-gpio";
151 gpio-miso = <&gpio 16 0>;
152 gpio-mosi = <&gpio 17 0>;
153 gpio-sck = <&gpio 18 0>;
154 num-chipselects = <1>;
155 cs-gpios = <&gpio 10 1>;
158 #address-cells = <1>;
160 compatible = "jedec,spi-nor";
162 spi-max-frequency = <1000000>;
171 reg = <0x20000 0x6a0000>;
176 reg = <0x6c0000 0x100000>;
181 reg = <0x7c0000 0x10000>;
186 ath9k_cal: partition@7d0000 {
187 reg = <0x7d0000 0x30000>;
188 label = "boardconfig";
195 compatible = "ath9k,eeprom";
196 ath,eep-flash = <&ath9k_cal 0x21000>;
197 ath,mac-offset = <0xf100>;
203 compatible = "gpio-keys-polled";
204 #address-cells = <1>;
206 poll-interval = <100>;
210 linux,code = <0x198>;
217 linux,input-type = <5>; /* EV_SW */
222 gpios = <&gpio 39 1>;
223 linux,code = <0x211>;
228 compatible = "gpio-leds";
240 gpios = <&gpio 19 0>;
244 gpios = <&gpio 20 0>;
248 gpios = <&gpio 37 0>;