5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
18 reg = <0x0 0x4000000>;
24 compatible = "lantiq,fpi", "simple-bus";
25 ranges = <0x0 0x10000000 0xEEFFFFF>;
26 reg = <0x10000000 0xEF00000>;
31 compatible = "lantiq,localbus", "simple-bus";
35 gpio: pinmux@E100B10 {
36 compatible = "lantiq,pinctrl-xr9";
37 pinctrl-names = "default";
38 pinctrl-0 = <&state_default>;
40 interrupt-parent = <&icu0>;
41 interrupts = <166 135 66 40 41 42 38>;
45 reg = <0xE100B10 0xA0>;
47 state_default: pinmux {
49 lantiq,groups = "exin3";
50 lantiq,function = "exin";
53 lantiq,groups = "stp";
54 lantiq,function = "stp";
57 lantiq,groups = "spi", "spi_cs4";
58 lantiq,function = "spi";
61 lantiq,groups = "nand cle", "nand ale",
62 "nand rd", "nand rdy";
63 lantiq,function = "ebu";
66 lantiq,groups = "mdio";
67 lantiq,function = "mdio";
70 lantiq,groups = "gnt1", "req1";
71 lantiq,function = "pci";
74 lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
75 "io4", "io5", "io6", /* stp */
88 lantiq,pins = "io39", /* exin3 */
89 "io48"; /* nand rdy */
98 compatible = "lantiq,xrx200-net";
99 reg = < 0xE108000 0x3000 /* switch */
100 0xE10B100 0x70 /* mdio */
101 0xE10B1D8 0x30 /* mii */
102 0xE10B308 0x30 /* pmac */
104 interrupt-parent = <&icu0>;
105 interrupts = <73 72>;
108 compatible = "lantiq,xrx200-pdi";
109 #address-cells = <1>;
112 mac-address = [ 00 11 22 33 44 55 ];
115 compatible = "lantiq,xrx200-pdi-port";
118 phy-handle = <&phy0>;
121 compatible = "lantiq,xrx200-pdi-port";
124 phy-handle = <&phy1>;
127 compatible = "lantiq,xrx200-pdi-port";
130 phy-handle = <&phy11>;
135 compatible = "lantiq,xrx200-pdi";
136 #address-cells = <1>;
139 mac-address = [ 00 11 22 33 44 56 ];
142 compatible = "lantiq,xrx200-pdi-port";
145 phy-handle = <&phy5>;
150 compatible = "lantiq,xrx200-pdi";
151 #address-cells = <1>;
154 mac-address = [ 00 11 22 33 44 57 ];
156 compatible = "lantiq,xrx200-pdi-port";
159 phy-handle = <&phy13>;
164 #address-cells = <1>;
166 compatible = "lantiq,xrx200-mdio";
167 phy0: ethernet-phy@0 {
169 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
171 phy1: ethernet-phy@1 {
173 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
175 phy5: ethernet-phy@5 {
177 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
179 phy11: ethernet-phy@11 {
181 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
183 phy13: ethernet-phy@13 {
185 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
191 compatible = "lantiq,gpio-stp-xway";
192 reg = <0xE100BB0 0x40>;
196 lantiq,shadow = <0xffff>;
197 lantiq,groups = <0x7>;
206 gpios = <&gpio 33 0>;
207 lantiq,portmask = <0x3>;
211 #address-cells = <3>;
213 #interrupt-cells = <1>;
214 compatible = "lantiq,pci-xway1";
215 bus-range = <0x0 0x0>;
216 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
217 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
218 reg = <0x7000000 0x8000 /* config space */
219 0xE105400 0x400>; /* pci bridge */
220 lantiq,bus-clock = <33333333>;
221 /*lantiq,external-clock;*/
222 lantiq,delay-hi = <0>; /* 0ns delay */
223 lantiq,delay-lo = <0>; /* 0.0ns delay */
224 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
226 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
228 gpios-reset = <&gpio 21 0>;
229 req-mask = <0x1>; /* GNT1 */
234 compatible = "lantiq,phy-xrx200";
235 firmware = "lantiq/vr9_phy11g_a2x.bin";
240 compatible = "gpio-keys-polled";
241 #address-cells = <1>;
243 poll-interval = <100>;
247 linux,code = <0x198>;
251 gpios = <&gpio 11 1>;
252 linux,code = <0x100>;
257 compatible = "gpio-leds";
260 label = "easy80920:green:power";
262 default-state = "keep";
265 label = "easy80920:green:warning";
269 label = "easy80920:green:fxs1";
273 label = "easy80920:green:fxs2";
277 label = "easy80920:green:fxo";
281 label = "easy80920:green:usb1";
285 label = "easy80920:green:usb2";
289 label = "easy80920:green:sd";
293 label = "easy80920:green:wps";
303 #address-cells = <1>;
305 compatible = "jedec,spi-nor";
307 spi-max-frequency = <1000000>;
311 label = "SPI (RO) U-Boot Image";
316 reg = <0x20000 0x10000>;
322 reg = <0x30000 0x10000>;
328 reg = <0x40000 0x10000>;
334 reg = <0x50000 0x003a0000>;