2 * arch/arm/mach-kirkwood/iconnect-setup.c
4 * Iomega iConnect Wireless
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/irq.h>
15 #include <linux/mtd/partitions.h>
16 #include <linux/mv643xx_eth.h>
17 #include <linux/ethtool.h>
18 #include <linux/gpio.h>
19 #include <linux/gpio_keys.h>
20 #include <linux/input.h>
21 #include <linux/leds.h>
22 #include <asm/mach-types.h>
23 #include <asm/mach/arch.h>
24 #include <mach/kirkwood.h>
28 static struct mtd_partition iconnect_nand_parts[] = {
35 .offset = MTDPART_OFS_NXTBLK,
39 .offset = MTDPART_OFS_NXTBLK,
43 .offset = MTDPART_OFS_NXTBLK,
44 .size = MTDPART_SIZ_FULL
48 static struct mv643xx_eth_platform_data iconnect_ge00_data = {
49 .phy_addr = MV643XX_ETH_PHY_ADDR(11),
52 static struct gpio_led iconnect_led_pins[] = {
54 .name = "iconnect:blue:power",
55 .default_trigger = "default-on",
59 .name = "iconnect:red:power",
63 .name = "iconnect:blue:usb1",
67 .name = "iconnect:blue:usb2",
71 .name = "iconnect:blue:usb3",
75 .name = "iconnect:blue:usb4",
79 .name = "iconnect:blue:otb",
84 static struct gpio_led_platform_data iconnect_led_data = {
85 .leds = iconnect_led_pins,
86 .num_leds = ARRAY_SIZE(iconnect_led_pins),
89 static struct platform_device iconnect_leds = {
93 .platform_data = &iconnect_led_data,
97 #define ICONNECT_GPIO_KEY_RESET 12
98 #define ICONNECT_GPIO_KEY_OTB 35
100 #define ICONNECT_SW_RESET 0x00
101 #define ICONNECT_SW_OTB 0x01
103 static struct gpio_keys_button iconnect_buttons[] = {
106 .code = ICONNECT_SW_RESET,
107 .gpio = ICONNECT_GPIO_KEY_RESET,
108 .desc = "Reset Button",
110 .debounce_interval = 100,
114 .code = ICONNECT_SW_OTB,
115 .gpio = ICONNECT_GPIO_KEY_OTB,
116 .desc = "OTB Button",
118 .debounce_interval = 100,
122 static struct gpio_keys_platform_data iconnect_button_data = {
123 .buttons = iconnect_buttons,
124 .nbuttons = ARRAY_SIZE(iconnect_buttons),
127 static struct platform_device iconnect_button_device = {
132 .platform_data = &iconnect_button_data,
136 static unsigned int iconnect_mpp_config[] __initdata = {
137 MPP12_GPIO, /*Input for reset button*/
138 MPP35_GPIO, /*Input for OTB button*/
149 static void __init iconnect_init(void)
154 * Basic setup. Needs to be called early.
157 kirkwood_mpp_conf(iconnect_mpp_config);
159 kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
160 kirkwood_ehci_init();
162 kirkwood_ge00_init(&iconnect_ge00_data);
163 kirkwood_pcie_id(&dev, &rev);
165 kirkwood_uart0_init();
168 platform_device_register(&iconnect_leds);
169 platform_device_register(&iconnect_button_device);
172 static int __init iconnect_pci_init(void)
174 if (machine_is_iconnect())
175 kirkwood_pcie_init(KW_PCIE0);
179 subsys_initcall(iconnect_pci_init);
182 MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
183 .atag_offset = 0x100,
184 .init_machine = iconnect_init,
185 .map_io = kirkwood_map_io,
186 .init_early = kirkwood_init_early,
187 .init_irq = kirkwood_init_irq,
188 .timer = &kirkwood_timer,
189 .restart = kirkwood_restart,