target/linux/ixp4xx/patches-3.10/150-lanready_ap1000_support.patch

   1 --- a/arch/arm/mach-ixp4xx/Kconfig
   2 +++ b/arch/arm/mach-ixp4xx/Kconfig
   3 @@ -105,6 +105,14 @@ config MACH_WRT300NV2
   4           WRT300N v2 router. For more information on this
   5           platform, see http://openwrt.org
   6
   7 +config MACH_AP1000
   8 +       bool "Lanready AP-1000"
   9 +       select PCI
  10 +       help
  11 +         Say 'Y' here if you want your kernel to support Lanready's
  12 +         AP1000 board. For more information on this
  13 +         platform, see http://openwrt.org
  14 +
  15  config ARCH_IXDP425
  16         bool "IXDP425"
  17         help
  18 --- a/arch/arm/mach-ixp4xx/Makefile
  19 +++ b/arch/arm/mach-ixp4xx/Makefile
  20 @@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN)      += pron
  21  obj-pci-$(CONFIG_MACH_SIDEWINDER)      += sidewinder-pci.o
  22  obj-pci-$(CONFIG_MACH_COMPEXWP18)      += ixdp425-pci.o
  23  obj-pci-$(CONFIG_MACH_WRT300NV2)               += wrt300nv2-pci.o
  24 +obj-pci-$(CONFIG_MACH_AP1000)          += ixdp425-pci.o
  25
  26  obj-y  += common.o
  27
  28 @@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_PRONGHORN)  += pronghor
  29  obj-$(CONFIG_MACH_SIDEWINDER)  += sidewinder-setup.o
  30  obj-$(CONFIG_MACH_COMPEXWP18)  += compex42x-setup.o
  31  obj-$(CONFIG_MACH_WRT300NV2)   += wrt300nv2-setup.o
  32 +obj-$(CONFIG_MACH_AP1000)      += ap1000-setup.o
  33
  34  obj-$(CONFIG_PCI)              += $(obj-pci-$(CONFIG_PCI)) common-pci.o
  35  obj-$(CONFIG_IXP4XX_QMGR)      += ixp4xx_qmgr.o
  36 --- /dev/null
  37 +++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
  38 @@ -0,0 +1,154 @@
  39 +/*
  40 + * arch/arm/mach-ixp4xx/ap1000-setup.c
  41 + *
  42 + * Lanready AP-1000
  43 + *
  44 + * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
  45 + *
  46 + * based on ixdp425-setup.c:
  47 + *     Copyright (C) 2003-2005 MontaVista Software, Inc.
  48 + *
  49 + * Author: Imre Kaloz <Kaloz@openwrt.org>
  50 + */
  51 +
  52 +#include <linux/kernel.h>
  53 +#include <linux/init.h>
  54 +#include <linux/device.h>
  55 +#include <linux/serial.h>
  56 +#include <linux/tty.h>
  57 +#include <linux/serial_8250.h>
  58 +#include <linux/slab.h>
  59 +#include <linux/dma-mapping.h>
  60 +
  61 +#include <asm/types.h>
  62 +#include <asm/setup.h>
  63 +#include <asm/memory.h>
  64 +#include <mach/hardware.h>
  65 +#include <asm/mach-types.h>
  66 +#include <asm/irq.h>
  67 +#include <asm/mach/arch.h>
  68 +#include <asm/mach/flash.h>
  69 +
  70 +static struct flash_platform_data ap1000_flash_data = {
  71 +       .map_name       = "cfi_probe",
  72 +       .width          = 2,
  73 +};
  74 +
  75 +static struct resource ap1000_flash_resource = {
  76 +       .flags          = IORESOURCE_MEM,
  77 +};
  78 +
  79 +static struct platform_device ap1000_flash = {
  80 +       .name           = "IXP4XX-Flash",
  81 +       .id             = 0,
  82 +       .dev            = {
  83 +               .platform_data = &ap1000_flash_data,
  84 +       },
  85 +       .num_resources  = 1,
  86 +       .resource       = &ap1000_flash_resource,
  87 +};
  88 +
  89 +static struct resource ap1000_uart_resources[] = {
  90 +       {
  91 +               .start          = IXP4XX_UART1_BASE_PHYS,
  92 +               .end            = IXP4XX_UART1_BASE_PHYS + 0x0fff,
  93 +               .flags          = IORESOURCE_MEM
  94 +       },
  95 +       {
  96 +               .start          = IXP4XX_UART2_BASE_PHYS,
  97 +               .end            = IXP4XX_UART2_BASE_PHYS + 0x0fff,
  98 +               .flags          = IORESOURCE_MEM
  99 +       }
 100 +};
 101 +
 102 +static struct plat_serial8250_port ap1000_uart_data[] = {
 103 +       {
 104 +               .mapbase        = IXP4XX_UART1_BASE_PHYS,
 105 +               .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 106 +               .irq            = IRQ_IXP4XX_UART1,
 107 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 108 +               .iotype         = UPIO_MEM,
 109 +               .regshift       = 2,
 110 +               .uartclk        = IXP4XX_UART_XTAL,
 111 +       },
 112 +       {
 113 +               .mapbase        = IXP4XX_UART2_BASE_PHYS,
 114 +               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 115 +               .irq            = IRQ_IXP4XX_UART2,
 116 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 117 +               .iotype         = UPIO_MEM,
 118 +               .regshift       = 2,
 119 +               .uartclk        = IXP4XX_UART_XTAL,
 120 +       },
 121 +       { },
 122 +};
 123 +
 124 +static struct platform_device ap1000_uart = {
 125 +       .name                   = "serial8250",
 126 +       .id                     = PLAT8250_DEV_PLATFORM,
 127 +       .dev.platform_data      = ap1000_uart_data,
 128 +       .num_resources          = 2,
 129 +       .resource               = ap1000_uart_resources
 130 +};
 131 +
 132 +static struct platform_device *ap1000_devices[] __initdata = {
 133 +       &ap1000_flash,
 134 +       &ap1000_uart
 135 +};
 136 +
 137 +static char ap1000_mem_fixup[] __initdata = "mem=64M ";
 138 +
 139 +static void __init ap1000_fixup(struct machine_desc *desc,
 140 +               struct tag *tags, char **cmdline, struct meminfo *mi)
 141 +
 142 +{
 143 +       struct tag *t = tags;
 144 +       char *p = *cmdline;
 145 +
 146 +       /* Find the end of the tags table, taking note of any cmdline tag. */
 147 +       for (; t->hdr.size; t = tag_next(t)) {
 148 +               if (t->hdr.tag == ATAG_CMDLINE) {
 149 +                       p = t->u.cmdline.cmdline;
 150 +               }
 151 +       }
 152 +
 153 +       /* Overwrite the end of the table with a new cmdline tag. */
 154 +       t->hdr.tag = ATAG_CMDLINE;
 155 +       t->hdr.size = (sizeof (struct tag_header) +
 156 +               strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
 157 +       strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
 158 +       strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
 159 +               COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
 160 +
 161 +       /* Terminate the table. */
 162 +       t = tag_next(t);
 163 +       t->hdr.tag = ATAG_NONE;
 164 +       t->hdr.size = 0;
 165 +}
 166 +
 167 +static void __init ap1000_init(void)
 168 +{
 169 +       ixp4xx_sys_init();
 170 +
 171 +       ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 172 +       ap1000_flash_resource.end =
 173 +               IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 174 +
 175 +       platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
 176 +}
 177 +
 178 +#ifdef CONFIG_MACH_AP1000
 179 +MACHINE_START(AP1000, "Lanready AP-1000")
 180 +       /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
 181 +       .fixup          = ap1000_fixup,
 182 +       .map_io         = ixp4xx_map_io,
 183 +       .init_irq       = ixp4xx_init_irq,
 184 +       .init_time      = ixp4xx_timer_init,
 185 +       .atag_offset    = 0x0100,
 186 +       .init_machine   = ap1000_init,
 187 +#if defined(CONFIG_PCI)
 188 +       .dma_zone_size  = SZ_64M,
 189 +#endif
 190 +       .restart        = ixp4xx_restart,
 191 +MACHINE_END
 192 +#endif
 193 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
 194 +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
 195 @@ -70,7 +70,7 @@ int __init ixdp425_pci_init(void)
 196  {
 197         if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
 198                         machine_is_ixdp465() || machine_is_kixrp435() ||
 199 -                       machine_is_compex42x())
 200 +                       machine_is_compex42x() || machine_is_ap1000())
 201                 pci_common_init(&ixdp425_pci);
 202         return 0;
 203  }