2 * Copyright 2013 Gateworks Corporation
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 /* these are used by bootloader for disabling nodes */
28 compatible = "gpio-leds";
32 gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
34 linux,default-trigger = "heartbeat";
39 gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
40 default-state = "off";
45 reg = <0x10000000 0x20000000>;
49 compatible = "simple-bus";
52 compatible = "regulator-fixed";
53 regulator-name = "3P3V";
54 regulator-min-microvolt = <3300000>;
55 regulator-max-microvolt = <3300000>;
60 compatible = "regulator-fixed";
61 regulator-name = "5P0V";
62 regulator-min-microvolt = <5000000>;
63 regulator-max-microvolt = <5000000>;
67 reg_usb_otg_vbus: usb_otg_vbus {
68 compatible = "regulator-fixed";
69 regulator-name = "usb_otg_vbus";
70 regulator-min-microvolt = <5000000>;
71 regulator-max-microvolt = <5000000>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&pinctrl_enet_1>;
82 phy-reset-gpios = <&gpio1 30 0>;
87 pinctrl-names = "default";
88 pinctrl-0 = <&pinctrl_gpmi_nand_2>;
93 clock-frequency = <100000>;
94 pinctrl-names = "default";
95 pinctrl-0 = <&pinctrl_i2c1_1>;
99 compatible = "atmel,24c02";
105 compatible = "atmel,24c02";
111 compatible = "atmel,24c02";
117 compatible = "atmel,24c02";
123 compatible = "nxp,pca9555";
130 compatible = "gw,gsp";
135 compatible = "dallas,ds1672";
141 clock-frequency = <100000>;
142 pinctrl-names = "default";
143 pinctrl-0 = <&pinctrl_i2c2_2>;
147 compatible = "ltc,ltc3676";
151 sw1_reg: ltc3676__sw1 {
152 regulator-min-microvolt = <1175000>;
153 regulator-max-microvolt = <1175000>;
158 sw2_reg: ltc3676__sw2 {
159 regulator-min-microvolt = <1800000>;
160 regulator-max-microvolt = <1800000>;
165 sw3_reg: ltc3676__sw3 {
166 regulator-min-microvolt = <1175000>;
167 regulator-max-microvolt = <1175000>;
172 sw4_reg: ltc3676__sw4 {
173 regulator-min-microvolt = <1500000>;
174 regulator-max-microvolt = <1500000>;
179 ldo2_reg: ltc3676__ldo2 {
180 regulator-min-microvolt = <2500000>;
181 regulator-max-microvolt = <2500000>;
186 ldo4_reg: ltc3676__ldo4 {
187 regulator-min-microvolt = <3000000>;
188 regulator-max-microvolt = <3000000>;
195 clock-frequency = <100000>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_i2c3_2>;
200 videoin: adv7180@20 {
201 compatible = "adi,adv7180";
207 reset-gpio = <&gpio1 0 0>;
212 pinctrl-names = "default";
213 pinctrl-0 = <&pinctrl_uart1_2>;
218 pinctrl-names = "default";
219 pinctrl-0 = <&pinctrl_uart2_3>;
224 pinctrl-names = "default";
225 pinctrl-0 = <&pinctrl_uart3_3>;
230 pinctrl-names = "default";
231 pinctrl-0 = <&pinctrl_uart5_1>;
236 vbus-supply = <®_usb_otg_vbus>;
237 pinctrl-names = "default";
238 pinctrl-0 = <&pinctrl_usbotg_1>;
239 disable-over-current;