target/linux/generic-2.6/files-2.6.24/drivers/ssb/main.c

   1 /*
   2  * Sonics Silicon Backplane
   3  * Subsystem core
   4  *
   5  * Copyright 2005, Broadcom Corporation
   6  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
   7  *
   8  * Licensed under the GNU/GPL. See COPYING for details.
   9  */
  10
  11 #include "ssb_private.h"
  12
  13 #include <linux/delay.h>
  14 #include <linux/io.h>
  15 #include <linux/ssb/ssb.h>
  16 #include <linux/ssb/ssb_regs.h>
  17 #include <linux/dma-mapping.h>
  18 #include <linux/pci.h>
  19
  20 #include <pcmcia/cs_types.h>
  21 #include <pcmcia/cs.h>
  22 #include <pcmcia/cistpl.h>
  23 #include <pcmcia/ds.h>
  24
  25
  26 MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
  27 MODULE_LICENSE("GPL");
  28
  29
  30 /* Temporary list of yet-to-be-attached buses */
  31 static LIST_HEAD(attach_queue);
  32 /* List if running buses */
  33 static LIST_HEAD(buses);
  34 /* Software ID counter */
  35 static unsigned int next_busnumber;
  36 /* buses_mutes locks the two buslists and the next_busnumber.
  37  * Don't lock this directly, but use ssb_buses_[un]lock() below. */
  38 static DEFINE_MUTEX(buses_mutex);
  39
  40 /* There are differences in the codeflow, if the bus is
  41  * initialized from early boot, as various needed services
  42  * are not available early. This is a mechanism to delay
  43  * these initializations to after early boot has finished.
  44  * It's also used to avoid mutex locking, as that's not
  45  * available and needed early. */
  46 static bool ssb_is_early_boot = 1;
  47
  48 static void ssb_buses_lock(void);
  49 static void ssb_buses_unlock(void);
  50
  51
  52 #ifdef CONFIG_SSB_PCIHOST
  53 struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
  54 {
  55         struct ssb_bus *bus;
  56
  57         ssb_buses_lock();
  58         list_for_each_entry(bus, &buses, list) {
  59                 if (bus->bustype == SSB_BUSTYPE_PCI &&
  60                     bus->host_pci == pdev)
  61                         goto found;
  62         }
  63         bus = NULL;
  64 found:
  65         ssb_buses_unlock();
  66
  67         return bus;
  68 }
  69 #endif /* CONFIG_SSB_PCIHOST */
  70
  71 static struct ssb_device *ssb_device_get(struct ssb_device *dev)
  72 {
  73         if (dev)
  74                 get_device(dev->dev);
  75         return dev;
  76 }
  77
  78 static void ssb_device_put(struct ssb_device *dev)
  79 {
  80         if (dev)
  81                 put_device(dev->dev);
  82 }
  83
  84 static int ssb_bus_resume(struct ssb_bus *bus)
  85 {
  86         int err;
  87
  88         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
  89         err = ssb_pcmcia_init(bus);
  90         if (err) {
  91                 /* No need to disable XTAL, as we don't have one on PCMCIA. */
  92                 return err;
  93         }
  94         ssb_chipco_resume(&bus->chipco);
  95
  96         return 0;
  97 }
  98
  99 static int ssb_device_resume(struct device *dev)
 100 {
 101         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 102         struct ssb_driver *ssb_drv;
 103         struct ssb_bus *bus;
 104         int err = 0;
 105
 106         bus = ssb_dev->bus;
 107         if (bus->suspend_cnt == bus->nr_devices) {
 108                 err = ssb_bus_resume(bus);
 109                 if (err)
 110                         return err;
 111         }
 112         bus->suspend_cnt--;
 113         if (dev->driver) {
 114                 ssb_drv = drv_to_ssb_drv(dev->driver);
 115                 if (ssb_drv && ssb_drv->resume)
 116                         err = ssb_drv->resume(ssb_dev);
 117                 if (err)
 118                         goto out;
 119         }
 120 out:
 121         return err;
 122 }
 123
 124 static void ssb_bus_suspend(struct ssb_bus *bus, pm_message_t state)
 125 {
 126         ssb_chipco_suspend(&bus->chipco, state);
 127         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 128
 129         /* Reset HW state information in memory, so that HW is
 130          * completely reinitialized on resume. */
 131         bus->mapped_device = NULL;
 132 #ifdef CONFIG_SSB_DRIVER_PCICORE
 133         bus->pcicore.setup_done = 0;
 134 #endif
 135 #ifdef CONFIG_SSB_DEBUG
 136         bus->powered_up = 0;
 137 #endif
 138 }
 139
 140 static int ssb_device_suspend(struct device *dev, pm_message_t state)
 141 {
 142         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 143         struct ssb_driver *ssb_drv;
 144         struct ssb_bus *bus;
 145         int err = 0;
 146
 147         if (dev->driver) {
 148                 ssb_drv = drv_to_ssb_drv(dev->driver);
 149                 if (ssb_drv && ssb_drv->suspend)
 150                         err = ssb_drv->suspend(ssb_dev, state);
 151                 if (err)
 152                         goto out;
 153         }
 154
 155         bus = ssb_dev->bus;
 156         bus->suspend_cnt++;
 157         if (bus->suspend_cnt == bus->nr_devices) {
 158                 /* All devices suspended. Shutdown the bus. */
 159                 ssb_bus_suspend(bus, state);
 160         }
 161
 162 out:
 163         return err;
 164 }
 165
 166 #ifdef CONFIG_SSB_PCIHOST
 167 int ssb_devices_freeze(struct ssb_bus *bus)
 168 {
 169         struct ssb_device *dev;
 170         struct ssb_driver *drv;
 171         int err = 0;
 172         int i;
 173         pm_message_t state = PMSG_FREEZE;
 174
 175         /* First check that we are capable to freeze all devices. */
 176         for (i = 0; i < bus->nr_devices; i++) {
 177                 dev = &(bus->devices[i]);
 178                 if (!dev->dev ||
 179                     !dev->dev->driver ||
 180                     !device_is_registered(dev->dev))
 181                         continue;
 182                 drv = drv_to_ssb_drv(dev->dev->driver);
 183                 if (!drv)
 184                         continue;
 185                 if (!drv->suspend) {
 186                         /* Nope, can't suspend this one. */
 187                         return -EOPNOTSUPP;
 188                 }
 189         }
 190         /* Now suspend all devices */
 191         for (i = 0; i < bus->nr_devices; i++) {
 192                 dev = &(bus->devices[i]);
 193                 if (!dev->dev ||
 194                     !dev->dev->driver ||
 195                     !device_is_registered(dev->dev))
 196                         continue;
 197                 drv = drv_to_ssb_drv(dev->dev->driver);
 198                 if (!drv)
 199                         continue;
 200                 err = drv->suspend(dev, state);
 201                 if (err) {
 202                         ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
 203                                    dev->dev->bus_id);
 204                         goto err_unwind;
 205                 }
 206         }
 207
 208         return 0;
 209 err_unwind:
 210         for (i--; i >= 0; i--) {
 211                 dev = &(bus->devices[i]);
 212                 if (!dev->dev ||
 213                     !dev->dev->driver ||
 214                     !device_is_registered(dev->dev))
 215                         continue;
 216                 drv = drv_to_ssb_drv(dev->dev->driver);
 217                 if (!drv)
 218                         continue;
 219                 if (drv->resume)
 220                         drv->resume(dev);
 221         }
 222         return err;
 223 }
 224
 225 int ssb_devices_thaw(struct ssb_bus *bus)
 226 {
 227         struct ssb_device *dev;
 228         struct ssb_driver *drv;
 229         int err;
 230         int i;
 231
 232         for (i = 0; i < bus->nr_devices; i++) {
 233                 dev = &(bus->devices[i]);
 234                 if (!dev->dev ||
 235                     !dev->dev->driver ||
 236                     !device_is_registered(dev->dev))
 237                         continue;
 238                 drv = drv_to_ssb_drv(dev->dev->driver);
 239                 if (!drv)
 240                         continue;
 241                 if (SSB_WARN_ON(!drv->resume))
 242                         continue;
 243                 err = drv->resume(dev);
 244                 if (err) {
 245                         ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
 246                                    dev->dev->bus_id);
 247                 }
 248         }
 249
 250         return 0;
 251 }
 252 #endif /* CONFIG_SSB_PCIHOST */
 253
 254 static void ssb_device_shutdown(struct device *dev)
 255 {
 256         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 257         struct ssb_driver *ssb_drv;
 258
 259         if (!dev->driver)
 260                 return;
 261         ssb_drv = drv_to_ssb_drv(dev->driver);
 262         if (ssb_drv && ssb_drv->shutdown)
 263                 ssb_drv->shutdown(ssb_dev);
 264 }
 265
 266 static int ssb_device_remove(struct device *dev)
 267 {
 268         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 269         struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 270
 271         if (ssb_drv && ssb_drv->remove)
 272                 ssb_drv->remove(ssb_dev);
 273         ssb_device_put(ssb_dev);
 274
 275         return 0;
 276 }
 277
 278 static int ssb_device_probe(struct device *dev)
 279 {
 280         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 281         struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 282         int err = 0;
 283
 284         ssb_device_get(ssb_dev);
 285         if (ssb_drv && ssb_drv->probe)
 286                 err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
 287         if (err)
 288                 ssb_device_put(ssb_dev);
 289
 290         return err;
 291 }
 292
 293 static int ssb_match_devid(const struct ssb_device_id *tabid,
 294                            const struct ssb_device_id *devid)
 295 {
 296         if ((tabid->vendor != devid->vendor) &&
 297             tabid->vendor != SSB_ANY_VENDOR)
 298                 return 0;
 299         if ((tabid->coreid != devid->coreid) &&
 300             tabid->coreid != SSB_ANY_ID)
 301                 return 0;
 302         if ((tabid->revision != devid->revision) &&
 303             tabid->revision != SSB_ANY_REV)
 304                 return 0;
 305         return 1;
 306 }
 307
 308 static int ssb_bus_match(struct device *dev, struct device_driver *drv)
 309 {
 310         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 311         struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
 312         const struct ssb_device_id *id;
 313
 314         for (id = ssb_drv->id_table;
 315              id->vendor || id->coreid || id->revision;
 316              id++) {
 317                 if (ssb_match_devid(id, &ssb_dev->id))
 318                         return 1; /* found */
 319         }
 320
 321         return 0;
 322 }
 323
 324 static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 325 {
 326         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 327
 328         if (!dev)
 329                 return -ENODEV;
 330
 331         return add_uevent_var(env,
 332                              "MODALIAS=ssb:v%04Xid%04Xrev%02X",
 333                              ssb_dev->id.vendor, ssb_dev->id.coreid,
 334                              ssb_dev->id.revision);
 335 }
 336
 337 static struct bus_type ssb_bustype = {
 338         .name           = "ssb",
 339         .match          = ssb_bus_match,
 340         .probe          = ssb_device_probe,
 341         .remove         = ssb_device_remove,
 342         .shutdown       = ssb_device_shutdown,
 343         .suspend        = ssb_device_suspend,
 344         .resume         = ssb_device_resume,
 345         .uevent         = ssb_device_uevent,
 346 };
 347
 348 static void ssb_buses_lock(void)
 349 {
 350         /* See the comment at the ssb_is_early_boot definition */
 351         if (!ssb_is_early_boot)
 352                 mutex_lock(&buses_mutex);
 353 }
 354
 355 static void ssb_buses_unlock(void)
 356 {
 357         /* See the comment at the ssb_is_early_boot definition */
 358         if (!ssb_is_early_boot)
 359                 mutex_unlock(&buses_mutex);
 360 }
 361
 362 static void ssb_devices_unregister(struct ssb_bus *bus)
 363 {
 364         struct ssb_device *sdev;
 365         int i;
 366
 367         for (i = bus->nr_devices - 1; i >= 0; i--) {
 368                 sdev = &(bus->devices[i]);
 369                 if (sdev->dev)
 370                         device_unregister(sdev->dev);
 371         }
 372 }
 373
 374 void ssb_bus_unregister(struct ssb_bus *bus)
 375 {
 376         ssb_buses_lock();
 377         ssb_devices_unregister(bus);
 378         list_del(&bus->list);
 379         ssb_buses_unlock();
 380
 381         /* ssb_pcmcia_exit(bus); */
 382         ssb_pci_exit(bus);
 383         ssb_iounmap(bus);
 384 }
 385 EXPORT_SYMBOL(ssb_bus_unregister);
 386
 387 static void ssb_release_dev(struct device *dev)
 388 {
 389         struct __ssb_dev_wrapper *devwrap;
 390
 391         devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
 392         kfree(devwrap);
 393 }
 394
 395 static int ssb_devices_register(struct ssb_bus *bus)
 396 {
 397         struct ssb_device *sdev;
 398         struct device *dev;
 399         struct __ssb_dev_wrapper *devwrap;
 400         int i, err = 0;
 401         int dev_idx = 0;
 402
 403         for (i = 0; i < bus->nr_devices; i++) {
 404                 sdev = &(bus->devices[i]);
 405
 406                 /* We don't register SSB-system devices to the kernel,
 407                  * as the drivers for them are built into SSB. */
 408                 switch (sdev->id.coreid) {
 409                 case SSB_DEV_CHIPCOMMON:
 410                 case SSB_DEV_PCI:
 411                 case SSB_DEV_PCIE:
 412                 case SSB_DEV_PCMCIA:
 413                 case SSB_DEV_MIPS:
 414                 case SSB_DEV_MIPS_3302:
 415                 case SSB_DEV_EXTIF:
 416                         continue;
 417                 }
 418
 419                 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
 420                 if (!devwrap) {
 421                         ssb_printk(KERN_ERR PFX
 422                                    "Could not allocate device\n");
 423                         err = -ENOMEM;
 424                         goto error;
 425                 }
 426                 dev = &devwrap->dev;
 427                 devwrap->sdev = sdev;
 428
 429                 dev->release = ssb_release_dev;
 430                 dev->bus = &ssb_bustype;
 431                 snprintf(dev->bus_id, sizeof(dev->bus_id),
 432                          "ssb%u:%d", bus->busnumber, dev_idx);
 433
 434                 switch (bus->bustype) {
 435                 case SSB_BUSTYPE_PCI:
 436 #ifdef CONFIG_SSB_PCIHOST
 437                         sdev->irq = bus->host_pci->irq;
 438                         dev->parent = &bus->host_pci->dev;
 439 #endif
 440                         break;
 441                 case SSB_BUSTYPE_PCMCIA:
 442 #ifdef CONFIG_SSB_PCMCIAHOST
 443                         sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
 444                         dev->parent = &bus->host_pcmcia->dev;
 445 #endif
 446                         break;
 447                 case SSB_BUSTYPE_SSB:
 448                         break;
 449                 }
 450
 451                 sdev->dev = dev;
 452                 err = device_register(dev);
 453                 if (err) {
 454                         ssb_printk(KERN_ERR PFX
 455                                    "Could not register %s\n",
 456                                    dev->bus_id);
 457                         /* Set dev to NULL to not unregister
 458                          * dev on error unwinding. */
 459                         sdev->dev = NULL;
 460                         kfree(devwrap);
 461                         goto error;
 462                 }
 463                 dev_idx++;
 464         }
 465
 466         return 0;
 467 error:
 468         /* Unwind the already registered devices. */
 469         ssb_devices_unregister(bus);
 470         return err;
 471 }
 472
 473 /* Needs ssb_buses_lock() */
 474 static int ssb_attach_queued_buses(void)
 475 {
 476         struct ssb_bus *bus, *n;
 477         int err = 0;
 478         int drop_them_all = 0;
 479
 480         list_for_each_entry_safe(bus, n, &attach_queue, list) {
 481                 if (drop_them_all) {
 482                         list_del(&bus->list);
 483                         continue;
 484                 }
 485                 /* Can't init the PCIcore in ssb_bus_register(), as that
 486                  * is too early in boot for embedded systems
 487                  * (no udelay() available). So do it here in attach stage.
 488                  */
 489                 err = ssb_bus_powerup(bus, 0);
 490                 if (err)
 491                         goto error;
 492                 ssb_pcicore_init(&bus->pcicore);
 493                 ssb_bus_may_powerdown(bus);
 494
 495                 err = ssb_devices_register(bus);
 496 error:
 497                 if (err) {
 498                         drop_them_all = 1;
 499                         list_del(&bus->list);
 500                         continue;
 501                 }
 502                 list_move_tail(&bus->list, &buses);
 503         }
 504
 505         return err;
 506 }
 507
 508 static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
 509 {
 510         struct ssb_bus *bus = dev->bus;
 511
 512         offset += dev->core_index * SSB_CORE_SIZE;
 513         return readw(bus->mmio + offset);
 514 }
 515
 516 static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
 517 {
 518         struct ssb_bus *bus = dev->bus;
 519
 520         offset += dev->core_index * SSB_CORE_SIZE;
 521         return readl(bus->mmio + offset);
 522 }
 523
 524 static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
 525 {
 526         struct ssb_bus *bus = dev->bus;
 527
 528         offset += dev->core_index * SSB_CORE_SIZE;
 529         writew(value, bus->mmio + offset);
 530 }
 531
 532 static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
 533 {
 534         struct ssb_bus *bus = dev->bus;
 535
 536         offset += dev->core_index * SSB_CORE_SIZE;
 537         writel(value, bus->mmio + offset);
 538 }
 539
 540 /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
 541 static const struct ssb_bus_ops ssb_ssb_ops = {
 542         .read16         = ssb_ssb_read16,
 543         .read32         = ssb_ssb_read32,
 544         .write16        = ssb_ssb_write16,
 545         .write32        = ssb_ssb_write32,
 546 };
 547
 548 static int ssb_fetch_invariants(struct ssb_bus *bus,
 549                                 ssb_invariants_func_t get_invariants)
 550 {
 551         struct ssb_init_invariants iv;
 552         int err;
 553
 554         memset(&iv, 0, sizeof(iv));
 555         err = get_invariants(bus, &iv);
 556         if (err)
 557                 goto out;
 558         memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
 559         memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
 560 out:
 561         return err;
 562 }
 563
 564 static int ssb_bus_register(struct ssb_bus *bus,
 565                             ssb_invariants_func_t get_invariants,
 566                             unsigned long baseaddr)
 567 {
 568         int err;
 569
 570         spin_lock_init(&bus->bar_lock);
 571         INIT_LIST_HEAD(&bus->list);
 572
 573         /* Powerup the bus */
 574         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
 575         if (err)
 576                 goto out;
 577         ssb_buses_lock();
 578         bus->busnumber = next_busnumber;
 579         /* Scan for devices (cores) */
 580         err = ssb_bus_scan(bus, baseaddr);
 581         if (err)
 582                 goto err_disable_xtal;
 583
 584         /* Init PCI-host device (if any) */
 585         err = ssb_pci_init(bus);
 586         if (err)
 587                 goto err_unmap;
 588         /* Init PCMCIA-host device (if any) */
 589         err = ssb_pcmcia_init(bus);
 590         if (err)
 591                 goto err_pci_exit;
 592
 593         /* Initialize basic system devices (if available) */
 594         err = ssb_bus_powerup(bus, 0);
 595         if (err)
 596                 goto err_pcmcia_exit;
 597         ssb_chipcommon_init(&bus->chipco);
 598         ssb_mipscore_init(&bus->mipscore);
 599         err = ssb_fetch_invariants(bus, get_invariants);
 600         if (err) {
 601                 ssb_bus_may_powerdown(bus);
 602                 goto err_pcmcia_exit;
 603         }
 604         ssb_bus_may_powerdown(bus);
 605
 606         /* Queue it for attach.
 607          * See the comment at the ssb_is_early_boot definition. */
 608         list_add_tail(&bus->list, &attach_queue);
 609         if (!ssb_is_early_boot) {
 610                 /* This is not early boot, so we must attach the bus now */
 611                 err = ssb_attach_queued_buses();
 612                 if (err)
 613                         goto err_dequeue;
 614         }
 615         next_busnumber++;
 616         ssb_buses_unlock();
 617
 618 out:
 619         return err;
 620
 621 err_dequeue:
 622         list_del(&bus->list);
 623 err_pcmcia_exit:
 624 /*      ssb_pcmcia_exit(bus); */
 625 err_pci_exit:
 626         ssb_pci_exit(bus);
 627 err_unmap:
 628         ssb_iounmap(bus);
 629 err_disable_xtal:
 630         ssb_buses_unlock();
 631         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 632         return err;
 633 }
 634
 635 #ifdef CONFIG_SSB_PCIHOST
 636 int ssb_bus_pcibus_register(struct ssb_bus *bus,
 637                             struct pci_dev *host_pci)
 638 {
 639         int err;
 640
 641         bus->bustype = SSB_BUSTYPE_PCI;
 642         bus->host_pci = host_pci;
 643         bus->ops = &ssb_pci_ops;
 644
 645         err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
 646         if (!err) {
 647                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 648                            "PCI device %s\n", host_pci->dev.bus_id);
 649         }
 650
 651         return err;
 652 }
 653 EXPORT_SYMBOL(ssb_bus_pcibus_register);
 654 #endif /* CONFIG_SSB_PCIHOST */
 655
 656 #ifdef CONFIG_SSB_PCMCIAHOST
 657 int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
 658                                struct pcmcia_device *pcmcia_dev,
 659                                unsigned long baseaddr)
 660 {
 661         int err;
 662
 663         bus->bustype = SSB_BUSTYPE_PCMCIA;
 664         bus->host_pcmcia = pcmcia_dev;
 665         bus->ops = &ssb_pcmcia_ops;
 666
 667         err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
 668         if (!err) {
 669                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 670                            "PCMCIA device %s\n", pcmcia_dev->devname);
 671         }
 672
 673         return err;
 674 }
 675 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
 676 #endif /* CONFIG_SSB_PCMCIAHOST */
 677
 678 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
 679                             unsigned long baseaddr,
 680                             ssb_invariants_func_t get_invariants)
 681 {
 682         int err;
 683
 684         bus->bustype = SSB_BUSTYPE_SSB;
 685         bus->ops = &ssb_ssb_ops;
 686
 687         err = ssb_bus_register(bus, get_invariants, baseaddr);
 688         if (!err) {
 689                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
 690                            "address 0x%08lX\n", baseaddr);
 691         }
 692
 693         return err;
 694 }
 695
 696 int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
 697 {
 698         drv->drv.name = drv->name;
 699         drv->drv.bus = &ssb_bustype;
 700         drv->drv.owner = owner;
 701
 702         return driver_register(&drv->drv);
 703 }
 704 EXPORT_SYMBOL(__ssb_driver_register);
 705
 706 void ssb_driver_unregister(struct ssb_driver *drv)
 707 {
 708         driver_unregister(&drv->drv);
 709 }
 710 EXPORT_SYMBOL(ssb_driver_unregister);
 711
 712 void ssb_set_devtypedata(struct ssb_device *dev, void *data)
 713 {
 714         struct ssb_bus *bus = dev->bus;
 715         struct ssb_device *ent;
 716         int i;
 717
 718         for (i = 0; i < bus->nr_devices; i++) {
 719                 ent = &(bus->devices[i]);
 720                 if (ent->id.vendor != dev->id.vendor)
 721                         continue;
 722                 if (ent->id.coreid != dev->id.coreid)
 723                         continue;
 724
 725                 ent->devtypedata = data;
 726         }
 727 }
 728 EXPORT_SYMBOL(ssb_set_devtypedata);
 729
 730 static u32 clkfactor_f6_resolve(u32 v)
 731 {
 732         /* map the magic values */
 733         switch (v) {
 734         case SSB_CHIPCO_CLK_F6_2:
 735                 return 2;
 736         case SSB_CHIPCO_CLK_F6_3:
 737                 return 3;
 738         case SSB_CHIPCO_CLK_F6_4:
 739                 return 4;
 740         case SSB_CHIPCO_CLK_F6_5:
 741                 return 5;
 742         case SSB_CHIPCO_CLK_F6_6:
 743                 return 6;
 744         case SSB_CHIPCO_CLK_F6_7:
 745                 return 7;
 746         }
 747         return 0;
 748 }
 749
 750 /* Calculate the speed the backplane would run at a given set of clockcontrol values */
 751 u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
 752 {
 753         u32 n1, n2, clock, m1, m2, m3, mc;
 754
 755         n1 = (n & SSB_CHIPCO_CLK_N1);
 756         n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
 757
 758         switch (plltype) {
 759         case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
 760                 if (m & SSB_CHIPCO_CLK_T6_MMASK)
 761                         return SSB_CHIPCO_CLK_T6_M0;
 762                 return SSB_CHIPCO_CLK_T6_M1;
 763         case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 764         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 765         case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
 766         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 767                 n1 = clkfactor_f6_resolve(n1);
 768                 n2 += SSB_CHIPCO_CLK_F5_BIAS;
 769                 break;
 770         case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
 771                 n1 += SSB_CHIPCO_CLK_T2_BIAS;
 772                 n2 += SSB_CHIPCO_CLK_T2_BIAS;
 773                 SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
 774                 SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
 775                 break;
 776         case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
 777                 return 100000000;
 778         default:
 779                 SSB_WARN_ON(1);
 780         }
 781
 782         switch (plltype) {
 783         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 784         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 785                 clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
 786                 break;
 787         default:
 788                 clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
 789         }
 790         if (!clock)
 791                 return 0;
 792
 793         m1 = (m & SSB_CHIPCO_CLK_M1);
 794         m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
 795         m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
 796         mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
 797
 798         switch (plltype) {
 799         case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 800         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 801         case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
 802         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 803                 m1 = clkfactor_f6_resolve(m1);
 804                 if ((plltype == SSB_PLLTYPE_1) ||
 805                     (plltype == SSB_PLLTYPE_3))
 806                         m2 += SSB_CHIPCO_CLK_F5_BIAS;
 807                 else
 808                         m2 = clkfactor_f6_resolve(m2);
 809                 m3 = clkfactor_f6_resolve(m3);
 810
 811                 switch (mc) {
 812                 case SSB_CHIPCO_CLK_MC_BYPASS:
 813                         return clock;
 814                 case SSB_CHIPCO_CLK_MC_M1:
 815                         return (clock / m1);
 816                 case SSB_CHIPCO_CLK_MC_M1M2:
 817                         return (clock / (m1 * m2));
 818                 case SSB_CHIPCO_CLK_MC_M1M2M3:
 819                         return (clock / (m1 * m2 * m3));
 820                 case SSB_CHIPCO_CLK_MC_M1M3:
 821                         return (clock / (m1 * m3));
 822                 }
 823                 return 0;
 824         case SSB_PLLTYPE_2:
 825                 m1 += SSB_CHIPCO_CLK_T2_BIAS;
 826                 m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
 827                 m3 += SSB_CHIPCO_CLK_T2_BIAS;
 828                 SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
 829                 SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
 830                 SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
 831
 832                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
 833                         clock /= m1;
 834                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
 835                         clock /= m2;
 836                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
 837                         clock /= m3;
 838                 return clock;
 839         default:
 840                 SSB_WARN_ON(1);
 841         }
 842         return 0;
 843 }
 844
 845 /* Get the current speed the backplane is running at */
 846 u32 ssb_clockspeed(struct ssb_bus *bus)
 847 {
 848         u32 rate;
 849         u32 plltype;
 850         u32 clkctl_n, clkctl_m;
 851
 852         if (ssb_extif_available(&bus->extif))
 853                 ssb_extif_get_clockcontrol(&bus->extif, &plltype,
 854                                            &clkctl_n, &clkctl_m);
 855         else if (bus->chipco.dev)
 856                 ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
 857                                             &clkctl_n, &clkctl_m);
 858         else
 859                 return 0;
 860
 861         if (bus->chip_id == 0x5365) {
 862                 rate = 100000000;
 863         } else {
 864                 rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
 865                 if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
 866                         rate /= 2;
 867         }
 868
 869         return rate;
 870 }
 871 EXPORT_SYMBOL(ssb_clockspeed);
 872
 873 static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
 874 {
 875         u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
 876
 877         /* The REJECT bit changed position in TMSLOW between
 878          * Backplane revisions. */
 879         switch (rev) {
 880         case SSB_IDLOW_SSBREV_22:
 881                 return SSB_TMSLOW_REJECT_22;
 882         case SSB_IDLOW_SSBREV_23:
 883                 return SSB_TMSLOW_REJECT_23;
 884         case SSB_IDLOW_SSBREV_24:     /* TODO - find the proper REJECT bits */
 885         case SSB_IDLOW_SSBREV_25:     /* same here */
 886         case SSB_IDLOW_SSBREV_26:     /* same here */
 887         case SSB_IDLOW_SSBREV_27:     /* same here */
 888                 return SSB_TMSLOW_REJECT_23;    /* this is a guess */
 889         default:
 890                 printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
 891                 WARN_ON(1);
 892         }
 893         return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
 894 }
 895
 896 int ssb_device_is_enabled(struct ssb_device *dev)
 897 {
 898         u32 val;
 899         u32 reject;
 900
 901         reject = ssb_tmslow_reject_bitmask(dev);
 902         val = ssb_read32(dev, SSB_TMSLOW);
 903         val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
 904
 905         return (val == SSB_TMSLOW_CLOCK);
 906 }
 907 EXPORT_SYMBOL(ssb_device_is_enabled);
 908
 909 static void ssb_flush_tmslow(struct ssb_device *dev)
 910 {
 911         /* Make _really_ sure the device has finished the TMSLOW
 912          * register write transaction, as we risk running into
 913          * a machine check exception otherwise.
 914          * Do this by reading the register back to commit the
 915          * PCI write and delay an additional usec for the device
 916          * to react to the change. */
 917         ssb_read32(dev, SSB_TMSLOW);
 918         udelay(1);
 919 }
 920
 921 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
 922 {
 923         u32 val;
 924
 925         ssb_device_disable(dev, core_specific_flags);
 926         ssb_write32(dev, SSB_TMSLOW,
 927                     SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
 928                     SSB_TMSLOW_FGC | core_specific_flags);
 929         ssb_flush_tmslow(dev);
 930
 931         /* Clear SERR if set. This is a hw bug workaround. */
 932         if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
 933                 ssb_write32(dev, SSB_TMSHIGH, 0);
 934
 935         val = ssb_read32(dev, SSB_IMSTATE);
 936         if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
 937                 val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
 938                 ssb_write32(dev, SSB_IMSTATE, val);
 939         }
 940
 941         ssb_write32(dev, SSB_TMSLOW,
 942                     SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
 943                     core_specific_flags);
 944         ssb_flush_tmslow(dev);
 945
 946         ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
 947                     core_specific_flags);
 948         ssb_flush_tmslow(dev);
 949 }
 950 EXPORT_SYMBOL(ssb_device_enable);
 951
 952 /* Wait for a bit in a register to get set or unset.
 953  * timeout is in units of ten-microseconds */
 954 static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
 955                         int timeout, int set)
 956 {
 957         int i;
 958         u32 val;
 959
 960         for (i = 0; i < timeout; i++) {
 961                 val = ssb_read32(dev, reg);
 962                 if (set) {
 963                         if (val & bitmask)
 964                                 return 0;
 965                 } else {
 966                         if (!(val & bitmask))
 967                                 return 0;
 968                 }
 969                 udelay(10);
 970         }
 971         printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
 972                             "register %04X to %s.\n",
 973                bitmask, reg, (set ? "set" : "clear"));
 974
 975         return -ETIMEDOUT;
 976 }
 977
 978 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
 979 {
 980         u32 reject;
 981
 982         if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
 983                 return;
 984
 985         reject = ssb_tmslow_reject_bitmask(dev);
 986         ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
 987         ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
 988         ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
 989         ssb_write32(dev, SSB_TMSLOW,
 990                     SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
 991                     reject | SSB_TMSLOW_RESET |
 992                     core_specific_flags);
 993         ssb_flush_tmslow(dev);
 994
 995         ssb_write32(dev, SSB_TMSLOW,
 996                     reject | SSB_TMSLOW_RESET |
 997                     core_specific_flags);
 998         ssb_flush_tmslow(dev);
 999 }
1000 EXPORT_SYMBOL(ssb_device_disable);
1001
1002 u32 ssb_dma_translation(struct ssb_device *dev)
1003 {
1004         switch (dev->bus->bustype) {
1005         case SSB_BUSTYPE_SSB:
1006                 return 0;
1007         case SSB_BUSTYPE_PCI:
1008         case SSB_BUSTYPE_PCMCIA:
1009                 return SSB_PCI_DMA;
1010         }
1011         return 0;
1012 }
1013 EXPORT_SYMBOL(ssb_dma_translation);
1014
1015 int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
1016 {
1017         struct device *dev = ssb_dev->dev;
1018
1019 #ifdef CONFIG_SSB_PCIHOST
1020         if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI &&
1021             !dma_supported(dev, mask))
1022                 return -EIO;
1023 #endif
1024         dev->coherent_dma_mask = mask;
1025         dev->dma_mask = &dev->coherent_dma_mask;
1026
1027         return 0;
1028 }
1029 EXPORT_SYMBOL(ssb_dma_set_mask);
1030
1031 int ssb_bus_may_powerdown(struct ssb_bus *bus)
1032 {
1033         struct ssb_chipcommon *cc;
1034         int err = 0;
1035
1036         /* On buses where more than one core may be working
1037          * at a time, we must not powerdown stuff if there are
1038          * still cores that may want to run. */
1039         if (bus->bustype == SSB_BUSTYPE_SSB)
1040                 goto out;
1041
1042         cc = &bus->chipco;
1043         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
1044         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
1045         if (err)
1046                 goto error;
1047 out:
1048 #ifdef CONFIG_SSB_DEBUG
1049         bus->powered_up = 0;
1050 #endif
1051         return err;
1052 error:
1053         ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
1054         goto out;
1055 }
1056 EXPORT_SYMBOL(ssb_bus_may_powerdown);
1057
1058 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
1059 {
1060         struct ssb_chipcommon *cc;
1061         int err;
1062         enum ssb_clkmode mode;
1063
1064         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
1065         if (err)
1066                 goto error;
1067         cc = &bus->chipco;
1068         mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
1069         ssb_chipco_set_clockmode(cc, mode);
1070
1071 #ifdef CONFIG_SSB_DEBUG
1072         bus->powered_up = 1;
1073 #endif
1074         return 0;
1075 error:
1076         ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
1077         return err;
1078 }
1079 EXPORT_SYMBOL(ssb_bus_powerup);
1080
1081 u32 ssb_admatch_base(u32 adm)
1082 {
1083         u32 base = 0;
1084
1085         switch (adm & SSB_ADM_TYPE) {
1086         case SSB_ADM_TYPE0:
1087                 base = (adm & SSB_ADM_BASE0);
1088                 break;
1089         case SSB_ADM_TYPE1:
1090                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1091                 base = (adm & SSB_ADM_BASE1);
1092                 break;
1093         case SSB_ADM_TYPE2:
1094                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1095                 base = (adm & SSB_ADM_BASE2);
1096                 break;
1097         default:
1098                 SSB_WARN_ON(1);
1099         }
1100
1101         return base;
1102 }
1103 EXPORT_SYMBOL(ssb_admatch_base);
1104
1105 u32 ssb_admatch_size(u32 adm)
1106 {
1107         u32 size = 0;
1108
1109         switch (adm & SSB_ADM_TYPE) {
1110         case SSB_ADM_TYPE0:
1111                 size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
1112                 break;
1113         case SSB_ADM_TYPE1:
1114                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1115                 size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
1116                 break;
1117         case SSB_ADM_TYPE2:
1118                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1119                 size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
1120                 break;
1121         default:
1122                 SSB_WARN_ON(1);
1123         }
1124         size = (1 << (size + 1));
1125
1126         return size;
1127 }
1128 EXPORT_SYMBOL(ssb_admatch_size);
1129
1130 static int __init ssb_modinit(void)
1131 {
1132         int err;
1133
1134         /* See the comment at the ssb_is_early_boot definition */
1135         ssb_is_early_boot = 0;
1136         err = bus_register(&ssb_bustype);
1137         if (err)
1138                 return err;
1139
1140         /* Maybe we already registered some buses at early boot.
1141          * Check for this and attach them
1142          */
1143         ssb_buses_lock();
1144         err = ssb_attach_queued_buses();
1145         ssb_buses_unlock();
1146         if (err)
1147                 bus_unregister(&ssb_bustype);
1148
1149         err = b43_pci_ssb_bridge_init();
1150         if (err) {
1151                 ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
1152                            "initialization failed");
1153                 /* don't fail SSB init because of this */
1154                 err = 0;
1155         }
1156
1157         return err;
1158 }
1159 /* ssb must be initialized after PCI but before the ssb drivers.
1160  * That means we must use some initcall between subsys_initcall
1161  * and device_initcall. */
1162 fs_initcall(ssb_modinit);
1163
1164 static void __exit ssb_modexit(void)
1165 {
1166         b43_pci_ssb_bridge_exit();
1167         bus_unregister(&ssb_bustype);
1168 }
1169 module_exit(ssb_modexit)