target/linux/coldfire/patches/005-Add-serial-driver-and-irda-driver-support-for-MCF544.patch

   1 From 5c37079957c5e5555aa8284a879f8cc44fa8eb25 Mon Sep 17 00:00:00 2001
   2 From: Alison Wang <b18965@freescale.com>
   3 Date: Thu, 4 Aug 2011 09:59:39 +0800
   4 Subject: [PATCH 05/52] Add serial driver and irda driver support for MCF5445x and MCF547x/MCF548x
   5
   6 Add common serial driver for MCF5445x and MCF547x/MCF548x.
   7 Also add irda support for MCF547x/MCF548x.
   8
   9 Signed-off-by: Alison Wang <b18965@freescale.com>
  10 ---
  11  drivers/tty/serial/Kconfig |   20 ++++++++++
  12  drivers/tty/serial/mcf.c   |   87 ++++++++++++++++++++++++++++++++++++++++++++
  13  2 files changed, 107 insertions(+), 0 deletions(-)
  14
  15 --- a/drivers/tty/serial/Kconfig
  16 +++ b/drivers/tty/serial/Kconfig
  17 @@ -1027,6 +1027,26 @@ config SERIAL_68328_RTS_CTS
  18         bool "Support RTS/CTS on 68328 serial port"
  19         depends on SERIAL_68328
  20
  21 +config SERIAL_COLDFIRE_IRDA
  22 +       bool "ColdFire IRDA support"
  23 +       depends on SERIAL_MCF
  24 +       help
  25 +         This driver supports IrDA on the ColdFire platform,
  26 +         such as MCF547x and MCF548x.
  27 +
  28 +         Say Y here if you want to use IrDA 1.1 SIR mode.
  29 +
  30 +config SERIAL_COLDFIRE_EDMA
  31 +       bool "ColdFire serial EDMA support"
  32 +       depends on SERIAL_MCF
  33 +       default n
  34 +       help
  35 +         Enables Enhanced Direct Memory Access(eDMA) in the Coldfire
  36 +          serial driver.
  37 +
  38 +          Say Y here if you want to use DMA processing of transmit
  39 +          and receive data for the serial driver.
  40 +
  41  config SERIAL_MCF
  42         bool "Coldfire serial support"
  43         depends on COLDFIRE
  44 --- a/drivers/tty/serial/mcf.c
  45 +++ b/drivers/tty/serial/mcf.c
  46 @@ -4,6 +4,10 @@
  47   *     mcf.c -- Freescale ColdFire UART driver
  48   *
  49   *     (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
  50 + * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
  51 + *     Jason Jin Jason.Jin@freescale.com
  52 + *     Shrek Wu B16972@freescale.com
  53 + *     Chengju Cai b22600@freescale.com
  54   *
  55   * This program is free software; you can redistribute it and/or modify
  56   * it under the terms of the GNU General Public License as published by
  57 @@ -23,9 +27,11 @@
  58  #include <linux/serial.h>
  59  #include <linux/serial_core.h>
  60  #include <linux/io.h>
  61 +#include <linux/delay.h>
  62  #include <asm/coldfire.h>
  63  #include <asm/mcfsim.h>
  64  #include <asm/mcfuart.h>
  65 +#include <asm/m5485psc.h>
  66  #include <asm/nettel.h>
  67
  68  /****************************************************************************/
  69 @@ -46,6 +52,10 @@
  70  #define        mcf_setppdtr(p, v)      do { } while (0)
  71  #endif
  72
  73 +#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
  74 +#define SERIAL_IRDA_LINE (2)
  75 +#endif
  76 +
  77  /****************************************************************************/
  78
  79  /*
  80 @@ -101,6 +111,15 @@ static void mcf_start_tx(struct uart_por
  81  {
  82         struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
  83
  84 +#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
  85 +       if (port->line == SERIAL_IRDA_LINE) {
  86 +               /* Disable IRDA receiver*/
  87 +               writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
  88 +               writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
  89 +
  90 +               writeb(MCFUART_UCR_TXENABLE, port->membase + MCFUART_UCR);
  91 +       }
  92 +#endif
  93         pp->imr |= MCFUART_UIR_TXREADY;
  94         writeb(pp->imr, port->membase + MCFUART_UIMR);
  95  }
  96 @@ -154,6 +173,30 @@ static int mcf_startup(struct uart_port
  97
  98         spin_lock_irqsave(&port->lock, flags);
  99
 100 +#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
 101 +       if (port->line == SERIAL_IRDA_LINE) {
 102 +               /* Put PSC in IrDA mode */
 103 +               MCF_PSC_SICR(port->line) = MCF_PSC_SICR_SIM_SIR;
 104 +
 105 +               /* Set pulse width to 1.6 uS */
 106 +               MCF_PSC_IRSDR(port->line) = (uint8_t)
 107 +                                           (16 * (CONFIG_MCFCLK / 10000000));
 108 +               MCF_PSC_IRCR1(port->line) = MCF_PSC_IRCR1_SPUL;
 109 +               MCF_PSC_IRCR2(port->line) = 0;
 110 +
 111 +               /* Enable RTS to send */
 112 +               MCF_PSC_OPSET(port->line) = MCF_PSC_OPSET_RTS;
 113 +
 114 +               /* Setup FIFO Alarms */
 115 +               MCF_PSC_RFAR(port->line) = MCF_PSC_RFAR_ALARM(248);
 116 +               MCF_PSC_TFAR(port->line) = MCF_PSC_TFAR_ALARM(248);
 117 +
 118 +               MCF_PSC_RFCR(port->line) = MCF_PSC_RFCR_FRMEN
 119 +                                        | MCF_PSC_RFCR_GR(4);
 120 +               MCF_PSC_TFCR(port->line) = MCF_PSC_TFCR_FRMEN
 121 +                                        | MCF_PSC_RFCR_GR(4);
 122 +       }
 123 +#endif
 124         /* Reset UART, get it into known state... */
 125         writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
 126         writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
 127 @@ -177,7 +220,17 @@ static void mcf_shutdown(struct uart_por
 128  {
 129         struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
 130         unsigned long flags;
 131 +#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
 132 +       unsigned long delay_counter = 0;
 133 +#endif
 134
 135 +#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
 136 +       while (!((readb(port->membase + MCFUART_USR)) & MCFUART_USR_TXEMPTY)) {
 137 +               if (delay_counter++ > 25000)
 138 +                       break;
 139 +               udelay(10);
 140 +       }
 141 +#endif
 142         spin_lock_irqsave(&port->lock, flags);
 143
 144         /* Disable all interrupts now */
 145 @@ -202,7 +255,14 @@ static void mcf_set_termios(struct uart_
 146         unsigned int baudfr;
 147  #endif
 148         unsigned char mr1, mr2;
 149 +#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
 150 +       int i = 0;      /* hush GCC */
 151 +#endif
 152
 153 +#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
 154 +       while (i++ < 35000)
 155 +               udelay(1);
 156 +#endif
 157         baud = uart_get_baud_rate(port, termios, old, 0, 230400);
 158  #if defined(CONFIG_M5272)
 159         baudclk = (MCF_BUSCLK / baud) / 32;
 160 @@ -331,6 +391,23 @@ static void mcf_tx_chars(struct mcf_uart
 161         while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) {
 162                 if (xmit->head == xmit->tail)
 163                         break;
 164 +#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
 165 +               if (port->line == SERIAL_IRDA_LINE) {
 166 +                       while (!((readb(port->membase + MCFUART_USR))\
 167 +                               & MCFUART_USR_TXEMPTY))
 168 +                               ;
 169 +                       /* delay for settle */
 170 +#if defined(CONFIG_M548X)
 171 +                       udelay(1);
 172 +#elif defined(CONFIG_M547X)
 173 +                       udelay(2);
 174 +#else
 175 +                       int i = 0;
 176 +                       while (i++ < 25000)
 177 +                               udelay(1);
 178 +#endif
 179 +               }
 180 +#endif
 181                 writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB);
 182                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
 183                 port->icount.tx++;
 184 @@ -340,6 +417,16 @@ static void mcf_tx_chars(struct mcf_uart
 185                 uart_write_wakeup(port);
 186
 187         if (xmit->head == xmit->tail) {
 188 +#ifdef CONFIG_SERIAL_COLDFIRE_IRDA
 189 +               if (port->line == SERIAL_IRDA_LINE) {
 190 +                       /* Enable receiver for IRDA */
 191 +                       writeb(MCFUART_UCR_CMDRESETRX,\
 192 +                               port->membase + MCFUART_UCR);
 193 +                       /* reset RX */
 194 +                       writeb(MCFUART_UCR_TXENABLE | MCFUART_UCR_RXENABLE,\
 195 +                               port->membase + MCFUART_UCR);
 196 +               }
 197 +#endif
 198                 pp->imr &= ~MCFUART_UIR_TXREADY;
 199                 writeb(pp->imr, port->membase + MCFUART_UIMR);
 200         }