target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c

   1 /*
   2 <:copyright-gpl
   3  Copyright 2002 Broadcom Corp. All Rights Reserved.
   4
   5  This program is free software; you can distribute it and/or modify it
   6  under the terms of the GNU General Public License (Version 2) as
   7  published by the Free Software Foundation.
   8
   9  This program is distributed in the hope it will be useful, but WITHOUT
  10  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  for more details.
  13
  14  You should have received a copy of the GNU General Public License along
  15  with this program; if not, write to the Free Software Foundation, Inc.,
  16  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  17 :>
  18 */
  19
  20 /* Description: Serial port driver for the BCM963XX. */
  21
  22 #define CARDNAME    "bcm963xx_serial driver"
  23 #define VERSION     "2.0"
  24 #define VER_STR     CARDNAME " v" VERSION "\n"
  25
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/version.h>
  30 #include <linux/init.h>
  31 #include <linux/slab.h>
  32 #include <linux/interrupt.h>
  33 #include <linux/spinlock.h>
  34
  35 /* for definition of struct console */
  36 #include <linux/console.h>
  37 #include <linux/tty.h>
  38 #include <linux/tty_flip.h>
  39 #include <linux/serial.h>
  40 #include <linux/serialP.h>
  41 #include <asm/uaccess.h>
  42
  43 #include <bcmtypes.h>
  44 #include <board.h>
  45 #include <bcm_map_part.h>
  46 #include <bcm_intr.h>
  47 #include <6348_map_part.h>
  48 #include <6348_intr.h>
  49
  50 static DEFINE_SPINLOCK(bcm963xx_serial_lock);
  51
  52 extern void _putc(char);
  53 extern void _puts(const char *);
  54
  55 typedef struct bcm_serial {
  56         volatile Uart *port;
  57         int type;
  58         int flags;
  59         int irq;
  60         int baud_base;
  61         int blocked_open;
  62         unsigned short close_delay;
  63         unsigned short closing_wait;
  64         unsigned short line;    /* port/line number */
  65         unsigned short cflags;  /* line configuration flag */
  66         unsigned short x_char;  /* xon/xoff character */
  67         unsigned short read_status_mask;        /* mask for read condition */
  68         unsigned short ignore_status_mask;      /* mask for ignore condition */
  69         unsigned long event;    /* mask used in BH */
  70         int xmit_head;          /* Position of the head */
  71         int xmit_tail;          /* Position of the tail */
  72         int xmit_cnt;           /* Count of the chars in the buffer */
  73         int count;              /* indicates how many times it has been opened */
  74         int magic;
  75
  76         struct async_icount icount;     /* keep track of things ... */
  77         struct tty_struct *tty; /* tty associated */
  78         struct termios normal_termios;
  79
  80         wait_queue_head_t open_wait;
  81         wait_queue_head_t close_wait;
  82
  83         long session;           /* Session of opening process */
  84         long pgrp;              /* pgrp of opening process */
  85
  86         unsigned char is_initialized;
  87 } Context;
  88
  89
  90 /*---------------------------------------------------------------------*/
  91 /* Define bits in the Interrupt Enable register                        */
  92 /*---------------------------------------------------------------------*/
  93 /* Enable receive interrupt              */
  94 #define RXINT   (RXFIFONE|RXOVFERR)
  95
  96 /* Enable transmit interrupt             */
  97 #define TXINT    (TXFIFOEMT|TXUNDERR|TXOVFERR)
  98
  99 /* Enable receiver line status interrupt */
 100 #define LSINT    (RXBRK|RXPARERR|RXFRAMERR)
 101
 102 #define BCM_NUM_UARTS                   1
 103
 104 #define BD_BCM63XX_TIMER_CLOCK_INPUT    (FPERIPH)
 105
 106
 107 static struct bcm_serial multi[BCM_NUM_UARTS];
 108 static struct bcm_serial *lines[BCM_NUM_UARTS];
 109 static struct tty_driver *serial_driver;
 110 static struct termios *serial_termios[BCM_NUM_UARTS];
 111 static struct termios *serial_termios_locked[BCM_NUM_UARTS];
 112
 113
 114 static void bcm_stop(struct tty_struct *tty);
 115 static void bcm_start(struct tty_struct *tty);
 116 static inline void receive_chars(struct bcm_serial *info);
 117 static int startup(struct bcm_serial *info);
 118 static void shutdown(struct bcm_serial *info);
 119 static void change_speed(volatile Uart * pUart, tcflag_t cFlag);
 120 static void bcm63xx_cons_flush_chars(struct tty_struct *tty);
 121 static int bcm63xx_cons_write(struct tty_struct *tty,
 122                               const unsigned char *buf, int count);
 123 static int bcm63xx_cons_write_room(struct tty_struct *tty);
 124 static int bcm_chars_in_buffer(struct tty_struct *tty);
 125 static void bcm_flush_buffer(struct tty_struct *tty);
 126 static void bcm_throttle(struct tty_struct *tty);
 127 static void bcm_unthrottle(struct tty_struct *tty);
 128 static void bcm_send_xchar(struct tty_struct *tty, char ch);
 129 static int get_serial_info(struct bcm_serial *info,
 130                            struct serial_struct *retinfo);
 131 static int set_serial_info(struct bcm_serial *info,
 132                            struct serial_struct *new_info);
 133 static int get_lsr_info(struct bcm_serial *info, unsigned int *value);
 134 static void send_break(struct bcm_serial *info, int duration);
 135 static int bcm_ioctl(struct tty_struct *tty, struct file *file,
 136                      unsigned int cmd, unsigned long arg);
 137 static void bcm_set_termios(struct tty_struct *tty,
 138                             struct termios *old_termios);
 139 static void bcm63xx_cons_close(struct tty_struct *tty, struct file *filp);
 140 static void bcm_hangup(struct tty_struct *tty);
 141 static int block_til_ready(struct tty_struct *tty, struct file *filp,
 142                            struct bcm_serial *info);
 143 static int bcm63xx_cons_open(struct tty_struct *tty, struct file *filp);
 144 static int __init bcm63xx_serialinit(void);
 145
 146
 147 /*
 148  * ------------------------------------------------------------
 149  * rs_stop () and rs_start ()
 150  *
 151  * These routines are called before setting or resetting
 152  * tty->stopped. They enable or disable transmitter interrupts,
 153  * as necessary.
 154  * ------------------------------------------------------------
 155  */
 156 static void bcm_stop(struct tty_struct *tty)
 157 {
 158 }
 159
 160 static void bcm_start(struct tty_struct *tty)
 161 {
 162         _puts(CARDNAME " Start\n");
 163 }
 164
 165 /*
 166  * ------------------------------------------------------------
 167  * receive_char ()
 168  *
 169  * This routine deals with inputs from any lines.
 170  * ------------------------------------------------------------
 171  */
 172 static inline void receive_chars(struct bcm_serial *info)
 173 {
 174         struct tty_struct *tty = 0;
 175         struct async_icount *icount;
 176         int ignore = 0;
 177         unsigned short status, tmp;
 178         UCHAR ch = 0;
 179         while ((status = info->port->intStatus) & RXINT) {
 180                 char flag_char = TTY_NORMAL;
 181
 182                 if (status & RXFIFONE)
 183                         ch = info->port->Data;  // Read the character
 184                 tty = info->tty;        /* now tty points to the proper dev */
 185                 icount = &info->icount;
 186                 if (!tty)
 187                         break;
 188                 if (!tty_buffer_request_room(tty, 1))
 189                         break;
 190                 icount->rx++;
 191                 if (status & RXBRK) {
 192                         flag_char = TTY_BREAK;
 193                         icount->brk++;
 194                 }
 195                 // keep track of the statistics
 196                 if (status & (RXFRAMERR | RXPARERR | RXOVFERR)) {
 197                         if (status & RXPARERR)  /* parity error */
 198                                 icount->parity++;
 199                         else if (status & RXFRAMERR)    /* frame error */
 200                                 icount->frame++;
 201                         if (status & RXOVFERR) {
 202                                 // Overflow. Reset the RX FIFO
 203                                 info->port->fifoctl |= RSTRXFIFOS;
 204                                 icount->overrun++;
 205                         }
 206                         // check to see if we should ignore the character
 207                         // and mask off conditions that should be ignored
 208                         if (status & info->ignore_status_mask) {
 209                                 if (++ignore > 100)
 210                                         break;
 211                                 goto ignore_char;
 212                         }
 213                         // Mask off the error conditions we want to ignore
 214                         tmp = status & info->read_status_mask;
 215                         if (tmp & RXPARERR) {
 216                                 flag_char = TTY_PARITY;
 217                         } else if (tmp & RXFRAMERR) {
 218                                 flag_char = TTY_FRAME;
 219                         }
 220                         if (tmp & RXOVFERR) {
 221                                 tty_insert_flip_char(tty, ch, flag_char);
 222                                 ch = 0;
 223                                 flag_char = TTY_OVERRUN;
 224                                 if (!tty_buffer_request_room(tty, 1))
 225                                         break;
 226                         }
 227                 }
 228                 tty_insert_flip_char(tty, ch, flag_char);
 229         }
 230       ignore_char:;
 231         tty_flip_buffer_push(tty);
 232         tty_schedule_flip(tty);
 233
 234 }
 235
 236
 237 /*
 238  * ------------------------------------------------------------
 239  * bcm_interrupt ()
 240  *
 241  * this is the main interrupt routine for the chip.
 242  * It deals with the multiple ports.
 243  * ------------------------------------------------------------
 244  */
 245 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
 246 static irqreturn_t bcm_interrupt(int irq, void *dev)
 247 #else
 248 static void bcm_interrupt(int irq, void *dev, struct pt_regs *regs)
 249 #endif
 250 {
 251         struct bcm_serial *info = lines[0];
 252         UINT16 intStat;
 253
 254         /* get pending interrupt flags from UART  */
 255
 256         /* Mask with only the serial interrupts that are enabled */
 257         intStat = info->port->intStatus & info->port->intMask;
 258         while (intStat) {
 259                 if (intStat & RXINT)
 260                         receive_chars(info);
 261                 else if (intStat & TXINT)
 262                         info->port->intStatus = TXINT;
 263                 else            /* don't know what it was, so let's mask it */
 264                         info->port->intMask &= ~intStat;
 265
 266                 intStat = info->port->intStatus & info->port->intMask;
 267         }
 268
 269         // Clear the interrupt
 270         enable_brcm_irq(INTERRUPT_ID_UART);
 271 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
 272         return IRQ_HANDLED;
 273 #endif
 274 }
 275
 276 /*
 277  * -------------------------------------------------------------------
 278  * startup ()
 279  *
 280  * various initialization tasks
 281  * -------------------------------------------------------------------
 282  */
 283 static int startup(struct bcm_serial *info)
 284 {
 285         // Port is already started...
 286         return 0;
 287 }
 288
 289 /*
 290  * -------------------------------------------------------------------
 291  * shutdown ()
 292  *
 293  * This routine will shutdown a serial port; interrupts are disabled, and
 294  * DTR is dropped if the hangup on close termio flag is on.
 295  * -------------------------------------------------------------------
 296  */
 297 static void shutdown(struct bcm_serial *info)
 298 {
 299         unsigned long flags;
 300         if (!info->is_initialized)
 301                 return;
 302
 303         spin_lock_irqsave(&bcm963xx_serial_lock, flags);
 304
 305         info->port->control &= ~(BRGEN | TXEN | RXEN);
 306         if (info->tty)
 307                 set_bit(TTY_IO_ERROR, &info->tty->flags);
 308         info->is_initialized = 0;
 309
 310         spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
 311 }
 312
 313 /*
 314  * -------------------------------------------------------------------
 315  * change_speed ()
 316  *
 317  * Set the baud rate, character size, parity and stop bits.
 318  * -------------------------------------------------------------------
 319  */
 320 static void change_speed(volatile Uart * pUart, tcflag_t cFlag)
 321 {
 322         unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
 323
 324         spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags);
 325         switch (cFlag & (CBAUD | CBAUDEX)) {
 326         case B115200:
 327                 ulBaud = 115200;
 328                 break;
 329         case B57600:
 330                 ulBaud = 57600;
 331                 break;
 332         case B38400:
 333                 ulBaud = 38400;
 334                 break;
 335         case B19200:
 336                 ulBaud = 19200;
 337                 break;
 338         case B9600:
 339                 ulBaud = 9600;
 340                 break;
 341         case B4800:
 342                 ulBaud = 4800;
 343                 break;
 344         case B2400:
 345                 ulBaud = 2400;
 346                 break;
 347         case B1800:
 348                 ulBaud = 1800;
 349                 break;
 350         case B1200:
 351                 ulBaud = 1200;
 352                 break;
 353         case B600:
 354                 ulBaud = 600;
 355                 break;
 356         case B300:
 357                 ulBaud = 300;
 358                 break;
 359         case B200:
 360                 ulBaud = 200;
 361                 break;
 362         case B150:
 363                 ulBaud = 150;
 364                 break;
 365         case B134:
 366                 ulBaud = 134;
 367                 break;
 368         case B110:
 369                 ulBaud = 110;
 370                 break;
 371         case B75:
 372                 ulBaud = 75;
 373                 break;
 374         case B50:
 375                 ulBaud = 50;
 376                 break;
 377         default:
 378                 ulBaud = 115200;
 379                 break;
 380         }
 381
 382         /* Calculate buad rate.  */
 383         ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
 384         ulTmp = (ulClockFreqHz / ulBaud) / 16;
 385         if (ulTmp & 0x01)
 386                 ulTmp /= 2;     /* Rounding up, so sub is already accounted for */
 387         else
 388                 ulTmp = (ulTmp / 2) - 1;        /* Rounding down so we must sub 1 */
 389         pUart->baudword = ulTmp;
 390
 391         /* Set character size, stop bits and parity.  */
 392         switch (cFlag & CSIZE) {
 393         case CS5:
 394                 ulTmp = BITS5SYM;       /* select transmit 5 bit data size */
 395                 break;
 396         case CS6:
 397                 ulTmp = BITS6SYM;       /* select transmit 6 bit data size */
 398                 break;
 399         case CS7:
 400                 ulTmp = BITS7SYM;       /* select transmit 7 bit data size */
 401                 break;
 402         default:
 403                 ulTmp = BITS8SYM;       /* select transmit 8 bit data size */
 404                 break;
 405         }
 406         if (cFlag & CSTOPB)
 407                 ulTmp |= TWOSTOP;       /* select 2 stop bits */
 408         else
 409                 ulTmp |= ONESTOP;       /* select one stop bit */
 410
 411         /* Write these values into the config reg.  */
 412         pUart->config = ulTmp;
 413         pUart->control &=
 414             ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN);
 415         switch (cFlag & (PARENB | PARODD)) {
 416         case PARENB | PARODD:
 417                 pUart->control |= RXPARITYEN | TXPARITYEN;
 418                 break;
 419         case PARENB:
 420                 pUart->control |=
 421                     RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN;
 422                 break;
 423         default:
 424                 pUart->control |= 0;
 425                 break;
 426         }
 427
 428         /* Reset and flush uart */
 429         pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
 430         spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags);
 431 }
 432
 433
 434 /*
 435  * -------------------------------------------------------------------
 436  * bcm_flush_char ()
 437  *
 438  * Nothing to flush.  Polled I/O is used.
 439  * -------------------------------------------------------------------
 440  */
 441 static void bcm63xx_cons_flush_chars(struct tty_struct *tty)
 442 {
 443 }
 444
 445
 446 /*
 447  * -------------------------------------------------------------------
 448  * bcm63xx_cons_write ()
 449  *
 450  * Main output routine using polled I/O.
 451  * -------------------------------------------------------------------
 452  */
 453 static int bcm63xx_cons_write(struct tty_struct *tty,
 454                               const unsigned char *buf, int count)
 455 {
 456         int c;
 457
 458         for (c = 0; c < count; c++)
 459                 _putc(buf[c]);
 460         return count;
 461 }
 462
 463 /*
 464  * -------------------------------------------------------------------
 465  * bcm63xx_cons_write_room ()
 466  *
 467  * Compute the amount of space available for writing.
 468  * -------------------------------------------------------------------
 469  */
 470 static int bcm63xx_cons_write_room(struct tty_struct *tty)
 471 {
 472         /* Pick a number.  Any number.  Polled I/O is used. */
 473         return 1024;
 474 }
 475
 476 /*
 477  * -------------------------------------------------------------------
 478  * bcm_chars_in_buffer ()
 479  *
 480  * compute the amount of char left to be transmitted
 481  * -------------------------------------------------------------------
 482  */
 483 static int bcm_chars_in_buffer(struct tty_struct *tty)
 484 {
 485         return 0;
 486 }
 487
 488 /*
 489  * -------------------------------------------------------------------
 490  * bcm_flush_buffer ()
 491  *
 492  * Empty the output buffer
 493  * -------------------------------------------------------------------
 494  */
 495 static void bcm_flush_buffer(struct tty_struct *tty)
 496 {
 497         tty_wakeup(tty);
 498 }
 499
 500 /*
 501  * ------------------------------------------------------------
 502  * bcm_throttle () and bcm_unthrottle ()
 503  *
 504  * This routine is called by the upper-layer tty layer to signal that
 505  * incoming characters should be throttled (or not).
 506  * ------------------------------------------------------------
 507  */
 508 static void bcm_throttle(struct tty_struct *tty)
 509 {
 510         struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
 511         if (I_IXOFF(tty))
 512                 info->x_char = STOP_CHAR(tty);
 513 }
 514
 515 static void bcm_unthrottle(struct tty_struct *tty)
 516 {
 517         struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
 518         if (I_IXOFF(tty)) {
 519                 if (info->x_char)
 520                         info->x_char = 0;
 521                 else
 522                         info->x_char = START_CHAR(tty);
 523         }
 524 }
 525
 526 static void bcm_send_xchar(struct tty_struct *tty, char ch)
 527 {
 528         struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
 529         info->x_char = ch;
 530         if (ch)
 531                 bcm_start(info->tty);
 532 }
 533
 534 /*
 535  * ------------------------------------------------------------
 536  * rs_ioctl () and friends
 537  * ------------------------------------------------------------
 538  */
 539 static int get_serial_info(struct bcm_serial *info,
 540                            struct serial_struct *retinfo)
 541 {
 542         struct serial_struct tmp;
 543
 544         if (!retinfo)
 545                 return -EFAULT;
 546
 547         memset(&tmp, 0, sizeof(tmp));
 548         tmp.type = info->type;
 549         tmp.line = info->line;
 550         tmp.port = (int) info->port;
 551         tmp.irq = info->irq;
 552         tmp.flags = 0;
 553         tmp.baud_base = info->baud_base;
 554         tmp.close_delay = info->close_delay;
 555         tmp.closing_wait = info->closing_wait;
 556
 557         return copy_to_user(retinfo, &tmp, sizeof(*retinfo));
 558 }
 559
 560 static int set_serial_info(struct bcm_serial *info,
 561                            struct serial_struct *new_info)
 562 {
 563         struct serial_struct new_serial;
 564         struct bcm_serial old_info;
 565         int retval = 0;
 566
 567         if (!new_info)
 568                 return -EFAULT;
 569
 570         copy_from_user(&new_serial, new_info, sizeof(new_serial));
 571         old_info = *info;
 572
 573         if (!capable(CAP_SYS_ADMIN))
 574                 return -EPERM;
 575
 576
 577         if (info->count > 1)
 578                 return -EBUSY;
 579
 580         /* OK, past this point, all the error checking has been done.
 581          * At this point, we start making changes.....
 582          */
 583         info->baud_base = new_serial.baud_base;
 584         info->type = new_serial.type;
 585         info->close_delay = new_serial.close_delay;
 586         info->closing_wait = new_serial.closing_wait;
 587         retval = startup(info);
 588         return retval;
 589 }
 590
 591 /*
 592  * get_lsr_info - get line status register info
 593  *
 594  * Purpose: Let user call ioctl() to get info when the UART physically
 595  *          is emptied.  On bus types like RS485, the transmitter must
 596  *          release the bus after transmitting. This must be done when
 597  *          the transmit shift register is empty, not be done when the
 598  *          transmit holding register is empty.  This functionality
 599  *          allows an RS485 driver to be written in user space.
 600  */
 601 static int get_lsr_info(struct bcm_serial *info, unsigned int *value)
 602 {
 603         return (0);
 604 }
 605
 606 /*
 607  * This routine sends a break character out the serial port.
 608  */
 609 static void send_break(struct bcm_serial *info, int duration)
 610 {
 611         unsigned long flags;
 612
 613         if (!info->port)
 614                 return;
 615
 616         current->state = TASK_INTERRUPTIBLE;
 617
 618         /*save_flags (flags);
 619            cli(); */
 620         spin_lock_irqsave(&bcm963xx_serial_lock, flags);
 621
 622         info->port->control |= XMITBREAK;
 623         schedule_timeout(duration);
 624         info->port->control &= ~XMITBREAK;
 625
 626         spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
 627         //restore_flags (flags);
 628 }
 629
 630 static int bcm_ioctl(struct tty_struct *tty, struct file *file,
 631                      unsigned int cmd, unsigned long arg)
 632 {
 633         int error;
 634         struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
 635         int retval;
 636
 637         if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
 638             (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
 639             (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
 640                 if (tty->flags & (1 << TTY_IO_ERROR))
 641                         return -EIO;
 642         }
 643         switch (cmd) {
 644
 645         case TCSBRK:            /* SVID version: non-zero arg --> no break */
 646                 retval = tty_check_change(tty);
 647                 if (retval)
 648                         return retval;
 649                 tty_wait_until_sent(tty, 0);
 650                 if (!arg)
 651                         send_break(info, HZ / 4);       /* 1/4 second */
 652                 return 0;
 653
 654         case TCSBRKP:           /* support for POSIX tcsendbreak() */
 655                 retval = tty_check_change(tty);
 656                 if (retval)
 657                         return retval;
 658                 tty_wait_until_sent(tty, 0);
 659                 send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
 660                 return 0;
 661
 662         case TIOCGSOFTCAR:
 663                 error =
 664                     access_ok(VERIFY_WRITE, (void *) arg, sizeof(long));
 665                 if (!error)
 666                         return -EFAULT;
 667                 else {
 668                         put_user(C_CLOCAL(tty) ? 1 : 0,
 669                                  (unsigned long *) arg);
 670                         return 0;
 671                 }
 672
 673         case TIOCSSOFTCAR:
 674                 error = get_user(arg, (unsigned long *) arg);
 675                 if (error)
 676                         return error;
 677                 tty->termios->c_cflag =
 678                     ((tty->termios->
 679                       c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
 680                 return 0;
 681
 682         case TIOCGSERIAL:
 683                 error =
 684                     access_ok(VERIFY_WRITE, (void *) arg,
 685                               sizeof(struct serial_struct));
 686                 if (!error)
 687                         return -EFAULT;
 688                 else
 689                         return get_serial_info(info,
 690                                                (struct serial_struct *)
 691                                                arg);
 692
 693         case TIOCSSERIAL:
 694                 return set_serial_info(info, (struct serial_struct *) arg);
 695
 696         case TIOCSERGETLSR:     /* Get line status register */
 697                 error =
 698                     access_ok(VERIFY_WRITE, (void *) arg,
 699                               sizeof(unsigned int));
 700                 if (!error)
 701                         return -EFAULT;
 702                 else
 703                         return get_lsr_info(info, (unsigned int *) arg);
 704
 705         case TIOCSERGSTRUCT:
 706                 error =
 707                     access_ok(VERIFY_WRITE, (void *) arg,
 708                               sizeof(struct bcm_serial));
 709                 if (!error)
 710                         return -EFAULT;
 711                 else {
 712                         copy_to_user((struct bcm_serial *) arg, info,
 713                                      sizeof(struct bcm_serial));
 714                         return 0;
 715                 }
 716
 717         default:
 718                 return -ENOIOCTLCMD;
 719         }
 720         return 0;
 721 }
 722
 723 static void bcm_set_termios(struct tty_struct *tty,
 724                             struct termios *old_termios)
 725 {
 726         struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
 727
 728         if (tty->termios->c_cflag != old_termios->c_cflag)
 729                 change_speed(info->port, tty->termios->c_cflag);
 730 }
 731
 732 /*
 733  * ------------------------------------------------------------
 734  * bcm63xx_cons_close()
 735  *
 736  * This routine is called when the serial port gets closed.  First, we
 737  * wait for the last remaining data to be sent.  Then, we turn off
 738  * the transmit enable and receive enable flags.
 739  * ------------------------------------------------------------
 740  */
 741 static void bcm63xx_cons_close(struct tty_struct *tty, struct file *filp)
 742 {
 743         struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
 744         unsigned long flags;
 745
 746         if (!info)
 747                 return;
 748
 749         /*save_flags (flags);
 750            cli(); */
 751         spin_lock_irqsave(&bcm963xx_serial_lock, flags);
 752
 753         if (tty_hung_up_p(filp)) {
 754                 spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
 755                 //restore_flags (flags);
 756                 return;
 757         }
 758
 759         if ((tty->count == 1) && (info->count != 1)) {
 760
 761                 /* Uh, oh.  tty->count is 1, which means that the tty
 762                  * structure will be freed.  Info->count should always
 763                  * be one in these conditions.  If it's greater than
 764                  * one, we've got real problems, since it means the
 765                  * serial port won't be shutdown.
 766                  */
 767                 printk
 768                     ("bcm63xx_cons_close: bad serial port count; tty->count is 1, "
 769                      "info->count is %d\n", info->count);
 770                 info->count = 1;
 771         }
 772
 773         if (--info->count < 0) {
 774                 printk("ds_close: bad serial port count for ttys%d: %d\n",
 775                        info->line, info->count);
 776                 info->count = 0;
 777         }
 778
 779         if (info->count) {
 780                 //restore_flags (flags);
 781                 spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
 782                 return;
 783         }
 784
 785         /* Now we wait for the transmit buffer to clear; and we notify
 786          * the line discipline to only process XON/XOFF characters.
 787          */
 788         tty->closing = 1;
 789
 790         /* At this point we stop accepting input.  To do this, we
 791          * disable the receive line status interrupts.
 792          */
 793         shutdown(info);
 794 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
 795         if (tty->driver->flush_buffer)
 796                 tty->driver->flush_buffer(tty);
 797 #else
 798         if (tty->driver.flush_buffer)
 799                 tty->driver.flush_buffer(tty);
 800 #endif
 801         if (tty->ldisc.flush_buffer)
 802                 tty->ldisc.flush_buffer(tty);
 803
 804         tty->closing = 0;
 805         info->event = 0;
 806         info->tty = 0;
 807         if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num) {
 808                 if (tty->ldisc.close)
 809                         (tty->ldisc.close) (tty);
 810                 tty->ldisc = *tty_ldisc_get(N_TTY);
 811                 tty->termios->c_line = N_TTY;
 812                 if (tty->ldisc.open)
 813                         (tty->ldisc.open) (tty);
 814         }
 815         if (info->blocked_open) {
 816                 if (info->close_delay) {
 817                         current->state = TASK_INTERRUPTIBLE;
 818                         schedule_timeout(info->close_delay);
 819                 }
 820                 wake_up_interruptible(&info->open_wait);
 821         }
 822         wake_up_interruptible(&info->close_wait);
 823
 824         //restore_flags (flags);
 825         spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
 826 }
 827
 828 /*
 829  * bcm_hangup () --- called by tty_hangup() when a hangup is signaled.
 830  */
 831 static void bcm_hangup(struct tty_struct *tty)
 832 {
 833
 834         struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
 835
 836         shutdown(info);
 837         info->event = 0;
 838         info->count = 0;
 839         info->tty = 0;
 840         wake_up_interruptible(&info->open_wait);
 841 }
 842
 843 /*
 844  * ------------------------------------------------------------
 845  * rs_open() and friends
 846  * ------------------------------------------------------------
 847  */
 848 static int block_til_ready(struct tty_struct *tty, struct file *filp,
 849                            struct bcm_serial *info)
 850 {
 851         return 0;
 852 }
 853
 854 /*
 855  * This routine is called whenever a serial port is opened.  It
 856  * enables interrupts for a serial port. It also performs the
 857  * serial-specific initialization for the tty structure.
 858  */
 859 static int bcm63xx_cons_open(struct tty_struct *tty, struct file *filp)
 860 {
 861         struct bcm_serial *info;
 862         int retval, line;
 863
 864         // Make sure we're only opening on of the ports we support
 865 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
 866         line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start;
 867 #else
 868         line = MINOR(tty->device) - tty->driver.minor_start;
 869 #endif
 870
 871         if ((line < 0) || (line >= BCM_NUM_UARTS))
 872                 return -ENODEV;
 873
 874         info = lines[line];
 875
 876         tty->low_latency = 1;
 877         info->port->intMask = 0;        /* Clear any pending interrupts */
 878         info->port->intMask = RXINT;    /* Enable RX */
 879
 880         info->count++;
 881         tty->driver_data = info;
 882         info->tty = tty;
 883         enable_brcm_irq(INTERRUPT_ID_UART);
 884
 885         // Start up serial port
 886         retval = startup(info);
 887         if (retval)
 888                 return retval;
 889
 890         retval = block_til_ready(tty, filp, info);
 891         if (retval)
 892                 return retval;
 893
 894
 895 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
 896         info->pgrp = process_group(current);
 897         info->session = current->signal->session;
 898 #else
 899         info->session = current->session;
 900         info->pgrp = current->pgrp;
 901 #endif
 902
 903         return 0;
 904 }
 905
 906
 907 static struct tty_operations rs_ops = {
 908         .open = bcm63xx_cons_open,
 909         .close = bcm63xx_cons_close,
 910         .write = bcm63xx_cons_write,
 911         .flush_chars = bcm63xx_cons_flush_chars,
 912         .write_room = bcm63xx_cons_write_room,
 913         .chars_in_buffer = bcm_chars_in_buffer,
 914         .flush_buffer = bcm_flush_buffer,
 915         .ioctl = bcm_ioctl,
 916         .throttle = bcm_throttle,
 917         .unthrottle = bcm_unthrottle,
 918         .send_xchar = bcm_send_xchar,
 919         .set_termios = bcm_set_termios,
 920         .stop = bcm_stop,
 921         .start = bcm_start,
 922         .hangup = bcm_hangup,
 923 };
 924
 925 /* --------------------------------------------------------------------------
 926     Name: bcm63xx_serialinit
 927  Purpose: Initialize our BCM63xx serial driver
 928 -------------------------------------------------------------------------- */
 929 static int __init bcm63xx_serialinit(void)
 930 {
 931         int i, flags;
 932         struct bcm_serial *info;
 933
 934         // Print the driver version information
 935         printk(VER_STR);
 936         serial_driver = alloc_tty_driver(BCM_NUM_UARTS);
 937         if (!serial_driver)
 938                 return -ENOMEM;
 939
 940         serial_driver->owner = THIS_MODULE;
 941         serial_driver->name = "ttyS";
 942         serial_driver->major = TTY_MAJOR;
 943         serial_driver->minor_start = 64;
 944         serial_driver->num = 1;
 945         serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
 946         serial_driver->subtype = SERIAL_TYPE_NORMAL;
 947         serial_driver->init_termios = tty_std_termios;
 948         serial_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
 949         serial_driver->flags = TTY_DRIVER_REAL_RAW;
 950
 951         serial_driver->termios = serial_termios;
 952         serial_driver->termios_locked = serial_termios_locked;
 953
 954         tty_set_operations(serial_driver, &rs_ops);
 955
 956         if (tty_register_driver(serial_driver))
 957                 panic("Couldn't register serial driver\n");
 958
 959         //save_flags(flags); cli();
 960         spin_lock_irqsave(&bcm963xx_serial_lock, flags);
 961
 962         for (i = 0; i < 1; i++) {
 963                 info = &multi[i];
 964                 lines[i] = info;
 965                 info->magic = SERIAL_MAGIC;
 966                 info->port = (Uart *) ((char *) UART_BASE + (i * 0x20));
 967                 info->tty = 0;
 968                 info->irq = (2 - i) + 8;
 969                 info->line = i;
 970                 info->close_delay = 50;
 971                 info->closing_wait = 3000;
 972                 info->x_char = 0;
 973                 info->event = 0;
 974                 info->count = 0;
 975                 info->blocked_open = 0;
 976                 info->normal_termios = serial_driver->init_termios;
 977                 init_waitqueue_head(&info->open_wait);
 978                 init_waitqueue_head(&info->close_wait);
 979
 980                 /* If we are pointing to address zero then punt - not correctly
 981                  * set up in setup.c to handle this.
 982                  */
 983                 if (!info->port)
 984                         return 0;
 985                 BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART);
 986         }
 987
 988         /* order matters here... the trick is that flags
 989          * is updated... in request_irq - to immediatedly obliterate
 990          * it is unwise.
 991          */
 992         spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
 993         return 0;
 994 }
 995
 996 module_init(bcm63xx_serialinit);
 997
 998 /* --------------------------------------------------------------------------
 999     Name: bcm_console_print
1000  Purpose: bcm_console_print is registered for printk.
1001           The console_lock must be held when we get here.
1002 -------------------------------------------------------------------------- */
1003 static void bcm_console_print(struct console *cons, const char *str,
1004                               unsigned int count)
1005 {
1006         unsigned int i;
1007         //_puts(str);
1008         for (i = 0; i < count; i++, str++) {
1009                 _putc(*str);
1010                 if (*str == 10) {
1011                         _putc(13);
1012                 }
1013         }
1014 }
1015
1016 static struct tty_driver *bcm_console_device(struct console *c, int *index)
1017 {
1018         *index = c->index;
1019         return serial_driver;
1020 }
1021
1022 static int __init bcm_console_setup(struct console *co, char *options)
1023 {
1024         return 0;
1025 }
1026
1027 static struct console bcm_sercons = {
1028         .name = "ttyS",
1029         .write = bcm_console_print,
1030         .device = bcm_console_device,
1031         .setup = bcm_console_setup,
1032         .flags = CON_PRINTBUFFER,
1033         .index = -1,
1034 };
1035
1036 static int __init bcm63xx_console_init(void)
1037 {
1038         register_console(&bcm_sercons);
1039         return 0;
1040 }
1041
1042 console_initcall(bcm63xx_console_init);