2a5e6b661c9319e5f9bd5a12ce0479ae83e3973a
[15.05/openwrt.git] / target / linux / brcm63xx / patches-3.14 / 528-board_nb6.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -18,6 +18,7 @@
4  #if 0 /* FIXME: 3.14 removed non-DT support */
5  #include <linux/spi/74x164.h>
6  #endif
7 +#include <linux/rtl8367.h>
8  #include <asm/addrspace.h>
9  #include <bcm63xx_board.h>
10  #include <bcm63xx_cpu.h>
11 @@ -42,6 +43,8 @@
12  #define NB4_SPI_GPIO_MOSI      7
13  #define NB4_SPI_GPIO_CLK       6
14  #define NB4_74HC64_GPIO(X)     (NB4_74X164_GPIO_BASE + (X))
15 +#define NB6_GPIO_RTL8367_SDA   18
16 +#define NB6_GPIO_RTL8367_SCK   20
17  
18  #define CT6373_PID_OFFSET              0xff80
19  #define CT6373_74X164_GPIO_BASE        64
20 @@ -2370,6 +2373,104 @@ static struct board_info __initdata boar
21  };
22  #endif /* CONFIG_BCM63XX_CPU_6358 */
23  
24 +#ifdef CONFIG_BCM63XX_CPU_6362
25 +static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
26 +       .mode = RTL8367_EXTIF_MODE_RGMII,
27 +       .txdelay = 1,
28 +       .rxdelay = 5,
29 +       .ability = {
30 +               .force_mode = 1,
31 +               .txpause = 1,
32 +               .rxpause = 1,
33 +               .link = 1,
34 +               .duplex = 1,
35 +               .speed = RTL8367_PORT_SPEED_1000,
36 +       },
37 +};
38 +
39 +static struct rtl8367_platform_data nb6_rtl8367_data = {
40 +       .gpio_sda       = NB6_GPIO_RTL8367_SDA,
41 +       .gpio_sck       = NB6_GPIO_RTL8367_SCK,
42 +       .extif0_cfg     = &nb6_rtl8367_extif0_cfg,
43 +};
44 +
45 +static struct platform_device nb6_rtl8367_device = {
46 +       .name           = RTL8367_DRIVER_NAME,
47 +       .id             = -1,
48 +       .dev = {
49 +               .platform_data  = &nb6_rtl8367_data,
50 +       }
51 +};
52 +
53 +static struct platform_device * __initdata nb6_devices[] = {
54 +       &nb6_rtl8367_device,
55 +};
56 +
57 +static struct board_info __initdata board_nb6 = {
58 +       .name                           = "NB6",
59 +       .expected_cpu_id                = 0x6362,
60 +
61 +       .has_uart0                      = 1,
62 +
63 +       .has_ohci0                      = 1,
64 +       .has_ehci0                      = 1,
65 +       .num_usbh_ports                 = 2,
66 +
67 +       .has_enetsw                     = 1,
68 +
69 +       .enetsw = {
70 +               .used_ports = {
71 +                       [4] = {
72 +                               .used   = 1,
73 +                               .phy_id = 0xff,
74 +                               .bypass_link = 1,
75 +                               .force_speed = 1000,
76 +                               .force_duplex_full = 1,
77 +                               .name   = "RGMII",
78 +                       },
79 +               },
80 +       },
81 +
82 +       .buttons = {
83 +               {
84 +                       .desc           = "reset",
85 +                       .gpio           = 24,
86 +                       .type           = EV_KEY,
87 +                       .code           = KEY_RESTART,
88 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
89 +                       .active_low     = 1,
90 +               },
91 +               {
92 +                       .desc           = "wps",
93 +                       .gpio           = 25,
94 +                       .type           = EV_KEY,
95 +                       .code           = KEY_WPS_BUTTON,
96 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
97 +                       .active_low     = 1,
98 +               },
99 +               {
100 +                       .desc           = "wlan",
101 +                       .gpio           = 12,
102 +                       .type           = EV_KEY,
103 +                       .code           = KEY_WLAN,
104 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
105 +                       .active_low     = 1,
106 +               },
107 +               {
108 +                       .desc           = "service",
109 +                       .gpio           = 10,
110 +                       .type           = EV_KEY,
111 +                       .code           = BTN_0,
112 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
113 +                       .active_low     = 1,
114 +               },
115 +       },
116 +
117 +       .devs = nb6_devices,
118 +       .num_devs = ARRAY_SIZE(nb6_devices),
119 +};
120 +#endif /* CONFIG_BCM63XX_CPU_6362 */
121 +
122  /*
123   * known 6368 boards
124   */
125 @@ -2573,6 +2674,10 @@ static const struct board_info __initcon
126         &board_DVAG3810BN,
127  #endif
128  
129 +#ifdef CONFIG_BCM63XX_CPU_6362
130 +       &board_nb6,
131 +#endif
132 +
133  #ifdef CONFIG_BCM63XX_CPU_6368
134         &board_96368mvwg,
135         &board_96368mvngr,
136 @@ -2634,6 +2739,9 @@ static struct of_device_id const bcm963x
137         { .compatible = "t-com,spw303v", .data = &board_spw303v, },
138         { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
139  #endif
140 +#ifdef CONFIG_BCM63XX_CPU_6362
141 +       { .compatible = "sfr,nb6-ser-r0", .data = &board_nb6, },
142 +#endif
143  #ifdef CONFIG_BCM63XX_CPU_6368
144         { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
145         { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },