target/linux/brcm63xx/image/Makefile

   1 #
   2 # Copyright (C) 2006-2010 OpenWrt.org
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7 include $(TOPDIR)/rules.mk
   8 include $(INCLUDE_DIR)/image.mk
   9
  10 LOADADDR = 0x80010000           # RAM start + 16M
  11 KERNEL_ENTRY = $(LOADADDR)      # Newer kernels add a jmp to the kernel_entry at the start of the binary
  12 RAMSIZE = 0x01000000            # 64MB
  13
  14 LOADER_MAKEOPTS= \
  15                 KDIR=$(KDIR) \
  16                 LOADADDR=$(LOADADDR) \
  17                 KERNEL_ENTRY=$(KERNEL_ENTRY) \
  18                 RAMSIZE=$(RAMSIZE)
  19
  20 define trxalign/jffs2-128k
  21 -a 0x20000
  22 endef
  23 define trxalign/jffs2-64k
  24 -a 0x10000
  25 endef
  26 define trxalign/squashfs
  27 -a 1024
  28 endef
  29
  30 define Image/Build/CFE
  31         # Generate the tagged image
  32         $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
  33                 --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
  34                 --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
  35                 --load-addr $(LOADADDR) --rsa-signature "$(5)" \
  36                 --info1 "$(4) $(REVISION)" --info2 $(1) \
  37                 $(6) $(7) $(8) $(9)
  38 endef
  39
  40 define Image/Build/CFEAGPF
  41         # Generate the tagged image
  42         $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
  43                 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
  44                 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
  45                 --load-addr $(LOADADDR) --tag-version 8 \
  46                 --signature2 IMAGE --block-size 0x20000 \
  47                 --image-offset $(4) --info1 "$(5) $(REVISION)" --info2 $(1)
  48 endef
  49
  50 define Image/Build/RG100A
  51         # Generate the tagged image
  52         $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
  53                 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
  54                 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
  55                 --load-addr $(LOADADDR) --block-size 0x20000 \
  56                 --image-offset $(4) --info1 "$(5) $(REVISION)" --info2 $(1)
  57 endef
  58
  59 define Image/Build/RedBoot
  60         cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
  61         gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
  62         $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
  63         dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
  64         dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
  65 endef
  66
  67 define Image/Build/CFEOLD
  68         $(TOPDIR)/scripts/brcmImage.pl -t -p    \
  69                 -b $(2) -c $(3)                 \
  70                 -k $(KDIR)/vmlinux.lzma.cfe     \
  71                 -r $(KDIR)/root.$(1)            \
  72                 -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
  73 endef
  74
  75 define Build/Clean
  76         $(MAKE) -C lzma-loader clean
  77 endef
  78
  79 define Image/Prepare
  80         # Standard LZMA kernel
  81         cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
  82
  83         # CFE is a LZMA nazi! It took me hours to find out the parameters!
  84         # Also I think lzma has a bug cause it generates different output depending on
  85         # if you use stdin / stdout or not. Use files instead of stdio here, cause
  86         # otherwise CFE will complain and not boot the image.
  87         $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
  88
  89         # Strip out the length, CFE doesn't like this
  90         dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
  91         dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
  92         rm -f $(KDIR)/vmlinux.lzma.tmp
  93
  94         # Build the LZMA loader
  95         rm -f $(KDIR)/loader.gz
  96         $(MAKE) -C lzma-loader \
  97                 BUILD_DIR="$(KDIR)" \
  98                 TARGET="$(KDIR)" \
  99                 clean install
 100
 101         echo -ne "\\x00" >> $(KDIR)/loader.gz
 102         rm -f $(KDIR)/fs_mark
 103         touch $(KDIR)/fs_mark
 104         $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
 105 endef
 106
 107 define Image/Build
 108         dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
 109         # Various routers
 110         $(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
 111         $(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
 112         $(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-revision,OpenWRT-$(REVISION))
 113         $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,)
 114         $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,--layoutver 5)
 115         $(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
 116         $(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
 117
 118         # BT Voyager V210_BTR
 119         $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
 120         # BT Voyager V210_ROI, V210_WB
 121         $(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,--layoutver 5)
 122         # BT Voyager V2091_BTR
 123         $(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,--layoutver 5)
 124         # BT Voyager V2091_ROI, V2091_WB
 125         $(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,--layoutver 5)
 126         # BT Voyager V220V, V220V_MGCP_BTR
 127         $(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,--layoutver 5)
 128         # BT Voyager V2110, V2110_AA, V2110_ROI
 129         $(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,--layoutver 5)
 130         # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
 131         $(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,--layoutver 5)
 132         # RTA1025W_16 (numerous routers)
 133         $(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,--layoutver 5)
 134         # Tecom GW6000
 135         $(call Image/Build/CFE,$(1),96348GW,6348,GW6000)
 136         # Tecom GW6200
 137         $(call Image/Build/CFE,$(1),96348GW,6348,GW6200,$(shell printf '\x99'))
 138         # Neufbox4
 139         $(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
 140         # Comtrend 536, 5621
 141         $(call Image/Build/CFE,$(1),96348GW-11,6348,CT536_CT5621)
 142         # Davolink DV201AMR
 143         $(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
 144         # USR 9108
 145         $(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108)
 146         # NetGear DG834GT, DG834PN
 147         $(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN)
 148         # Belkin f5d7633
 149         $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
 150         # D-Link DSL-2640B
 151         $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B)
 152         # D-Link DSL-2740B
 153         $(call Image/Build/CFE,$(1),96358GW,6358,DSL2740B)
 154
 155         # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
 156         $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
 157         # TP-Link 8900GB
 158         $(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02'))
 159
 160         # Sagem F@ST2404
 161         $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
 162         $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
 163         # Inventel Livebox
 164         $(call Image/Build/RedBoot,livebox)
 165         # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
 166         $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe)
 167         $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W)
 168         # Pirelli A226G
 169         $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe)
 170         $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G)
 171
 172         # RG100A,DB120 etc.
 173         $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
 174
 175         # Telsey CPVA642-type (e.g. CPA-ZNTE60T)
 176         $(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0")
 177
 178 endef
 179
 180 $(eval $(call BuildImage))