1 #!/bin/sh /etc/rc.common
2 # Copyright (C) 2006 OpenWrt.org
7 [ -e /etc/config/network ] && {
18 append batch "delete network.eth0.${1}${N}"
19 append batch "set network.eth0_${id}=switch_vlan${N}"
20 append batch "set network.eth0_${id}.device=eth0${N}"
21 append batch "set network.eth0_${id}.vlan=${id}${N}"
22 append batch "set network.eth0_${id}.ports='${ports}'${N}"
37 logger -t netconfig "migrating switch config to new format ..."
38 echo "$batch${N}commit network" | uci batch
47 if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
49 echo boardtype=wgt634u
51 strings "$(find_mtd_part nvram)"
54 function p(cfgname, name) {
55 if (c[name] != "") print " option " cfgname " \"" c[name] "\""
58 function vlan(id, name) {
60 print "config switch_vlan eth0_" id
61 print " option device \"eth0\""
62 print " option vlan " id
63 print " option ports \"" c[name] "\""
68 function macinc(mac, maca, i, result) {
70 for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
71 if (++maca[6] > 0xff) {
75 for (i = 1; i <= 6; i++) {
76 if (i != 1) result = result ":"
77 result = result sprintf("%02x", maca[i])
84 c["lan_ifname"]="eth0.0"
85 c["wan_ifname"]="eth0.1"
86 c["vlan0ports"]="1 2 3 4 5"
88 getline < "/proc/diag/model"
90 for (i = 0; i < 6; i++) {
91 if (mac_check != "") mac_check = mac_check ":"
92 mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
94 if (system("[ -d /proc/switch/eth0 ] ") == 0) {
95 getline < "/proc/switch/eth0/cpuport"
98 c["vlan0ports"]="1 2 3 4 8"
104 ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) || \
105 ($1 ~ /^vlan[0-9]{1,2}ports$/) {
110 if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
111 ((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8")))) {
112 c["vlan0ports"] = "0 1 2 3 8"
113 c["vlan1ports"] = "4 8"
115 if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
116 ((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5")))) {
117 c["vlan0ports"] = "0 1 2 3 5"
118 c["vlan1ports"] = "4 5"
120 if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
122 c["lan_ifname"] = "eth1"
124 if (model == "ASUS WL-330gE") {
126 c["lan_ifname"] = "eth0.0"
127 c["vlan0ports"] = "4 5"
130 if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
131 c["wan_ifname"] = "eth1"
132 c["lan_ifname"] = "eth0"
134 if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
135 c["vlan0ports"] = "0 1 2 3 5"
136 c["vlan1ports"] = "4 5"
138 if (model == "Dell TrueMobile 2300") {
139 c["lan_ifname"] = "eth0"
140 c["wan_ifname"] = "eth1"
141 c["vlan0ports"] = "0 1 2 3 4 5u"
144 if (nvram["boardtype"] == "bcm94710r4") {
146 c["lan_ifname"] = "eth0"
147 c["wan_ifname"] = "eth1"
149 if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
150 c["vlan0ports"] = "0 1 2 3 5"
151 c["vlan1ports"] = "4 5"
153 if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
154 if (nvram["boardnum"] == "45") {
156 c["vlan0ports"] = "1 2 3 4 5"
157 c["vlan1ports"] = "0 5"
160 c["vlan0ports"] = "0 1 2 3 4 5u"
162 c["lan_ifname"] = "eth0"
163 c["wan_ifname"] = "eth1"
165 # MAC addresses on 4704 tend to be screwed up. Add a workaround here
166 if (nvram["et0macaddr"] ~ mac_check) {
167 c["lan_macaddr"] = nvram["et0macaddr"]
168 c["wan_macaddr"] = macinc(c["lan_macaddr"])
172 # Buffalo WBR-B11 and Buffalo WBR-G54
173 if (nvram["boardtype"] == "bcm94710ap") {
174 c["vlan0ports"] = "0 1 2 3 4 5u"
176 c["lan_ifname"] = "eth0"
177 c["wan_ifname"] = "eth1"
181 if ((nvram["boardnum"] == "2") || \
182 (nvram["boardnum"] == "1024")) {
183 c["lan_ifname"]="eth0"
188 if ((nvram["boardum"] == "2") && \
189 (nvram["GemtekPmonVer"] == "1")) {
190 c["lan_ifname"]="eth0"
195 # These are actually same as defaults above. For some reason this script applies
196 # Generic BCM94704 settings instead so we revert to proper settings here.
197 # Hopefully someone will fix this properly soon.
198 if (model == "ASUS WL-700gE") {
199 c["lan_ifname"]="eth0.0"
200 c["wan_ifname"]="eth0.1"
201 c["vlan0ports"]="1 2 3 4 5"
202 c["vlan1ports"]="0 5"
204 if ((model == "Motorola WR850G V2/V3") || (model == "Siemens SE505 V2")) {
205 c["vlan0ports"]="0 1 2 3 5"
206 c["vlan1ports"]="4 5"
208 if (model == "ASUS WL-500W") {
209 c["lan_ifname"] = "eth0"
210 c["wan_ifname"] = "eth1"
211 c["vlan0ports"] = "0 1 2 3 4 5u"
214 if (model == "OvisLink WL-1600GL") {
215 c["lan_ifname"] = "eth0.0"
216 c["wan_ifname"] = "eth0.1"
217 c["vlan0ports"] = "0 1 2 3 5"
218 c["vlan1ports"] = "4 5"
221 if (c["vlan0ports"] || c["vlan1ports"]) {
222 print "#### VLAN configuration "
223 print "config switch eth0"
224 print " option enable 1"
226 vlan(0, "vlan0ports")
227 vlan(1, "vlan1ports")
229 print "#### Loopback configuration"
230 print "config interface loopback"
231 print " option ifname \"lo\""
232 print " option proto static"
233 print " option ipaddr 127.0.0.1"
234 print " option netmask 255.0.0.0"
237 print "#### LAN configuration"
238 print "config interface lan"
239 print " option type bridge"
240 p("ifname", "lan_ifname")
241 p("macaddr", "lan_macaddr")
242 print " option proto static"
243 print " option ipaddr 192.168.1.1"
244 print " option netmask 255.255.255.0"
247 if (c["wan_ifname"]) {
248 print "#### WAN configuration"
249 print "config interface wan"
250 p("ifname", "wan_ifname")
251 p("macaddr", "wan_macaddr")
252 print " option proto dhcp"
254 print "#### WAN configuration (disabled)"
255 print "#config interface wan"
256 print "# option proto dhcp"
258 }' > /etc/config/network