strip the kernel version suffix from target directories, except for brcm-2.4 (the...
[openwrt.git] / target / linux / at91 / patches-2.6.21 / 003-gpio-driver.patch
1 --- linux-2.6.21.1.orig/arch/arm/mach-at91/gpio.c       2007-04-27 23:49:26.000000000 +0200
2 +++ linux-2.6.21.1/arch/arm/mach-at91/gpio.c    2007-05-28 15:30:48.000000000 +0200
3 @@ -27,6 +27,7 @@
4  
5  static struct at91_gpio_bank *gpio;
6  static int gpio_banks;
7 +static u32 pio_gpio_pin[4] = { 0, 0, 0, 0 };
8  
9  
10  static inline void __iomem *pin_to_controller(unsigned pin)
11 @@ -71,9 +72,13 @@
12  {
13         void __iomem    *pio = pin_to_controller(pin);
14         unsigned        mask = pin_to_mask(pin);
15 +       int bank = (pin - PIN_BASE) / 32;
16  
17         if (!pio)
18                 return -EINVAL;
19 +
20 +       pio_gpio_pin[bank] |= mask;
21 +
22         __raw_writel(mask, pio + PIO_IDR);
23         __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
24         __raw_writel(mask, pio + PIO_PER);
25 @@ -130,10 +135,13 @@
26  {
27         void __iomem    *pio = pin_to_controller(pin);
28         unsigned        mask = pin_to_mask(pin);
29 +       int bank = (pin - PIN_BASE) / 32;
30  
31         if (!pio)
32                 return -EINVAL;
33  
34 +       pio_gpio_pin[bank] |= mask;
35 +
36         __raw_writel(mask, pio + PIO_IDR);
37         __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
38         __raw_writel(mask, pio + PIO_ODR);
39 @@ -151,10 +159,13 @@
40  {
41         void __iomem    *pio = pin_to_controller(pin);
42         unsigned        mask = pin_to_mask(pin);
43 +       int bank = (pin - PIN_BASE) / 32;
44  
45         if (!pio)
46                 return -EINVAL;
47  
48 +       pio_gpio_pin[bank] |= mask;
49 +
50         __raw_writel(mask, pio + PIO_IDR);
51         __raw_writel(mask, pio + PIO_PUDR);
52         __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
53 @@ -262,6 +273,18 @@
54  }
55  EXPORT_SYMBOL(at91_get_gpio_value);
56  
57 +int at91_is_pin_gpio(unsigned pin)
58 +{
59 +  void __iomem  *pio = pin_to_controller(pin);
60 +  unsigned  mask = pin_to_mask(pin);
61 +  int     bank = (pin - PIN_BASE) / 32;
62 +
63 +  if (!pio)
64 +    return -EINVAL;
65 +  return (pio_gpio_pin[bank] & mask) != 0;
66 +}
67 +EXPORT_SYMBOL(at91_is_pin_gpio);
68 +
69  /*--------------------------------------------------------------------------*/
70  
71  #ifdef CONFIG_PM
72 --- linux-2.6.21.1.orig/drivers/char/Kconfig    2007-05-28 12:22:29.000000000 +0200
73 +++ linux-2.6.21.1/drivers/char/Kconfig 2007-05-28 15:37:43.000000000 +0200
74 @@ -1087,5 +1087,12 @@
75           The SPI driver gives user mode access to this serial
76           bus on the AT91RM9200 processor.
77  
78 +config AT91_VLIO
79 +  tristate "Versalink LED and GPIO interface"
80 +  depends on ARCH_AT91RM9200 && MACH_VLINK
81 +  default n
82 +  help
83 +    Provides a handler GPIO's in userspace
84 +
85  endmenu
86  
87 --- linux-2.6.21.1.orig/drivers/char/Makefile   2007-05-28 12:22:29.000000000 +0200
88 +++ linux-2.6.21.1/drivers/char/Makefile        2007-05-28 15:38:11.000000000 +0200
89 @@ -95,6 +95,7 @@
90  obj-$(CONFIG_TELCLOCK)         += tlclk.o
91  obj-$(CONFIG_AT91_SPI)         += at91_spi.o
92  obj-$(CONFIG_AT91_SPIDEV)      += at91_spidev.o
93 +obj-$(CONFIG_AT91_VLIO)  += vlink_giu.o
94  
95  obj-$(CONFIG_WATCHDOG)         += watchdog/
96  obj-$(CONFIG_MWAVE)            += mwave/
97 --- linux-2.6.21.1.orig/drivers/char/vlink_giu.c        1970-01-01 01:00:00.000000000 +0100
98 +++ linux-2.6.21.1/drivers/char/vlink_giu.c     2007-05-28 15:39:47.000000000 +0200
99 @@ -0,0 +1,256 @@
100 +/*
101 + *  Driver for FDL Versalink GPIO
102 + *
103 + *  Copyright (C) 2005 Guthrie Consulting
104 + *     Author: Hamish Guthrie <hamish@prodigi.ch>
105 + *
106 + *  This program is free software; you can redistribute it and/or modify
107 + *  it under the terms of the GNU General Public License as published by
108 + *  the Free Software Foundation; either version 2 of the License, or
109 + *  (at your option) any later version.
110 + *
111 + *  This program is distributed in the hope that it will be useful,
112 + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
113 + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
114 + *  GNU General Public License for more details.
115 + *
116 + *  You should have received a copy of the GNU General Public License
117 + *  along with this program; if not, write to the Free Software
118 + *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
119 + */
120 +
121 +#include <linux/module.h>
122 +#include <linux/moduleparam.h>
123 +#include <linux/init.h>
124 +#include <linux/platform_device.h>
125 +
126 +#include <linux/kernel.h>
127 +#include <linux/slab.h>
128 +#include <linux/fs.h>
129 +#include <linux/errno.h>
130 +#include <linux/init.h>
131 +#include <linux/types.h>
132 +#include <linux/proc_fs.h>
133 +#include <linux/fcntl.h>
134 +#include <linux/seq_file.h>
135 +#include <linux/cdev.h>
136 +#include <asm/arch/gpio.h>
137 +#include <asm/uaccess.h>
138 +
139 +static int major;      /* default is dynamic major device number */
140 +module_param(major, int, 0);
141 +MODULE_PARM_DESC(major, "Major device number");
142 +
143 +#define VIO_NR_DEVS 96
144 +
145 +struct vio_dev {
146 +       struct cdev cdev;
147 +};
148 +
149 +struct vio_dev *vio_devices;
150 +static struct class *vio_class;
151 +
152 +static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
153 +                         loff_t *ppos)
154 +{
155 +       unsigned int pin;
156 +       int retval;
157 +       char value = '0';
158 +
159 +       pin = iminor(file->f_dentry->d_inode);
160 +
161 +       retval = at91_get_gpio_value(PIN_BASE + pin);
162 +       if (retval < 0)
163 +               return -EFAULT;
164 +
165 +       value = retval + 0x30;
166 +       if (put_user(value, buf))
167 +               return -EFAULT;
168 +
169 +       return 1;
170 +}
171 +
172 +static ssize_t gpio_write(struct file *file, const char __user *data,
173 +                          size_t len, loff_t *ppos)
174 +{
175 +       unsigned int pin;
176 +       size_t i;
177 +       char c;
178 +       int retval = 0;
179 +
180 +       pin = iminor(file->f_dentry->d_inode);
181 +
182 +       for (i = 0; i < len; i++) {
183 +               if (get_user(c, data + i))
184 +                       return -EFAULT;
185 +
186 +               switch (c) {
187 +               case '0':
188 +               case '1':
189 +                       retval = at91_set_gpio_value(PIN_BASE + pin, (int)c - 0x30);
190 +                       if (retval < 0)
191 +                               return -EFAULT;
192 +                       break;
193 +               default:
194 +                       break;
195 +               }
196 +
197 +               if (retval < 0)
198 +                       break;
199 +       }
200 +
201 +       return i;
202 +}
203 +
204 +static int gpio_open(struct inode *inode, struct file *file)
205 +{
206 +       return nonseekable_open(inode, file);
207 +}
208 +
209 +static int gpio_release(struct inode *inode, struct file *file)
210 +{
211 +       return 0;
212 +}
213 +
214 +static struct file_operations vio_fops = {
215 +       .owner          = THIS_MODULE,
216 +       .read           = gpio_read,
217 +       .write          = gpio_write,
218 +       .open           = gpio_open,
219 +       .release        = gpio_release,
220 +};
221 +
222 +static void vio_setup_cdev(struct vio_dev *dev, int index)
223 +{
224 +       int err, devno = MKDEV(major, index);
225 +
226 +       cdev_init(&dev->cdev, &vio_fops);
227 +       dev->cdev.owner = THIS_MODULE;
228 +       dev->cdev.ops = &vio_fops;
229 +       err = cdev_add (&dev->cdev, devno, 1);
230 +       if (err)
231 +               printk(KERN_NOTICE "vio: Error %d adding vio%d", err, index);
232 +}
233 +
234 +static int vio_remove(struct platform_device *dev)
235 +{
236 +       int i;
237 +       dev_t devno = MKDEV(major, 0);
238 +
239 +       if (vio_devices) {
240 +               for(i=0; i<VIO_NR_DEVS; i++) {
241 +                       int iodev = at91_is_pin_gpio(PIN_BASE + i);
242 +                       if (iodev) {
243 +                               cdev_del(&vio_devices[i].cdev);
244 +                               class_device_destroy(vio_class, MKDEV(major, i));
245 +                       }
246 +               }
247 +               kfree(vio_devices);
248 +       }
249 +
250 +       class_destroy(vio_class);
251 +       unregister_chrdev_region(devno, VIO_NR_DEVS);
252 +
253 +       platform_set_drvdata(dev, NULL);
254 +
255 +       return 0;
256 +}
257 +
258 +static int vio_probe(struct platform_device *dev)
259 +{
260 +       int retval, i, j;
261 +       dev_t vdev = 0;
262 +
263 +       if (major) {
264 +               vdev = MKDEV(major, 0);
265 +               retval = register_chrdev_region(vdev, VIO_NR_DEVS, "vio");
266 +       } else {
267 +               retval = alloc_chrdev_region(&vdev, 0, VIO_NR_DEVS, "vio");
268 +               major = MAJOR(vdev);
269 +       }
270 +       if (retval < 0) {
271 +               printk(KERN_WARNING "vio: can't get major %d\n", major);
272 +               return retval;
273 +       }
274 +
275 +       if (major == 0) {
276 +               major = retval;
277 +               printk(KERN_INFO "vio: major number %d\n", major);
278 +       }
279 +
280 +       vio_class = class_create(THIS_MODULE, "vio");
281 +
282 +       if (IS_ERR(vio_class)) {
283 +               printk(KERN_ERR "vio: Error creating vio class\n");
284 +               vio_remove(dev);
285 +               return PTR_ERR(vio_class);
286 +       }
287 +
288 +       vio_devices = kmalloc(VIO_NR_DEVS * sizeof(struct vio_dev), GFP_KERNEL);
289 +       if (!vio_devices) {
290 +               retval = -ENOMEM;
291 +               goto fail;
292 +       }
293 +       memset(vio_devices, 0, VIO_NR_DEVS * sizeof(struct vio_dev));
294 +
295 +       for (i=0; i<VIO_NR_DEVS/32; i++)
296 +               for(j=0; j<32; j++) {
297 +                       int iodev = at91_is_pin_gpio(PIN_BASE + i*32 + j);
298 +                       if (iodev) {
299 +                               vio_setup_cdev(&vio_devices[i*32 + j], i*32 + j);
300 +                               class_device_create(vio_class, NULL, MKDEV(major, i*32 + j), NULL,
301 +                                       "vio%c%d", i + 'A', j);
302 +                       }
303 +               }
304 +
305 +       platform_set_drvdata(dev, vio_devices);
306 +
307 +       return 0;
308 +
309 +fail:
310 +       vio_remove(dev);
311 +       return retval;
312 +}
313 +
314 +static struct platform_device *vio_platform_device;
315 +
316 +static struct platform_driver vio_driver = {
317 +       .probe          = vio_probe,
318 +       .remove         = vio_remove,
319 +       .driver         = {
320 +               .name   = "vio",
321 +               .owner  = THIS_MODULE,
322 +       },
323 +};
324 +
325 +static int __init vio_init(void)
326 +{
327 +       int retval;
328 +
329 +       vio_platform_device = platform_device_register_simple("vio", -1, NULL, 0);
330 +       if (IS_ERR(vio_platform_device)) {
331 +               printk(KERN_WARNING "vio: device registration failed\n");
332 +               return PTR_ERR(vio_platform_device);
333 +       }
334 +
335 +       retval = platform_driver_register(&vio_driver);
336 +       if (retval < 0) {
337 +               printk(KERN_WARNING "vio: driver registration failed\n");
338 +               platform_device_unregister(vio_platform_device);
339 +       }
340 +       
341 +       return retval;
342 +}
343 +
344 +static void __exit vio_exit(void)
345 +{
346 +       platform_driver_unregister(&vio_driver);
347 +       platform_device_unregister(vio_platform_device);
348 +}
349 +
350 +module_init(vio_init);
351 +module_exit(vio_exit);
352 +
353 +MODULE_AUTHOR("Hamish Guthrie <hamish@prodigi.ch>");
354 +MODULE_DESCRIPTION("FDL Versalink GPIO Driver");
355 +MODULE_LICENSE("GPL");