2 * Ubiquiti RouterStation support
4 * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
6 * Copyright (C) 2008 Ubiquiti <support@ubnt.com>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License version 2 as published
10 * by the Free Software Foundation.
13 #include <linux/pci.h>
14 #include <linux/platform_device.h>
15 #include <linux/input.h>
17 #include <asm/mips_machine.h>
18 #include <asm/mach-ar71xx/ar71xx.h>
21 #include "dev-m25p80.h"
22 #include "dev-ap91-pci.h"
23 #include "dev-pb42-pci.h"
25 #define UBNT_RS_GPIO_LED_RF 2
26 #define UBNT_RS_GPIO_SW4 8
28 #define UBNT_LS_SR71_GPIO_LED_D25 0
29 #define UBNT_LS_SR71_GPIO_LED_D26 1
30 #define UBNT_LS_SR71_GPIO_LED_D24 2
31 #define UBNT_LS_SR71_GPIO_LED_D23 4
32 #define UBNT_LS_SR71_GPIO_LED_D22 5
33 #define UBNT_LS_SR71_GPIO_LED_D27 6
34 #define UBNT_LS_SR71_GPIO_LED_D28 7
36 #define UBNT_M_GPIO_LED_L1 0
37 #define UBNT_M_GPIO_LED_L2 1
38 #define UBNT_M_GPIO_LED_L3 11
39 #define UBNT_M_GPIO_LED_L4 7
40 #define UBNT_M_GPIO_BTN_RESET 12
42 #define UBNT_BUTTONS_POLL_INTERVAL 20
44 static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
46 .name = "ubnt:green:rf",
47 .gpio = UBNT_RS_GPIO_LED_RF,
52 static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
54 .name = "ubnt:green:d22",
55 .gpio = UBNT_LS_SR71_GPIO_LED_D22,
58 .name = "ubnt:green:d23",
59 .gpio = UBNT_LS_SR71_GPIO_LED_D23,
62 .name = "ubnt:green:d24",
63 .gpio = UBNT_LS_SR71_GPIO_LED_D24,
66 .name = "ubnt:red:d25",
67 .gpio = UBNT_LS_SR71_GPIO_LED_D25,
70 .name = "ubnt:red:d26",
71 .gpio = UBNT_LS_SR71_GPIO_LED_D26,
74 .name = "ubnt:green:d27",
75 .gpio = UBNT_LS_SR71_GPIO_LED_D27,
78 .name = "ubnt:green:d28",
79 .gpio = UBNT_LS_SR71_GPIO_LED_D28,
84 static struct gpio_led ubnt_m_leds_gpio[] __initdata = {
86 .name = "ubnt:red:link1",
87 .gpio = UBNT_M_GPIO_LED_L1,
90 .name = "ubnt:orange:link2",
91 .gpio = UBNT_M_GPIO_LED_L2,
94 .name = "ubnt:green:link3",
95 .gpio = UBNT_M_GPIO_LED_L3,
98 .name = "ubnt:green:link4",
99 .gpio = UBNT_M_GPIO_LED_L4,
104 static struct gpio_button ubnt_gpio_buttons[] __initdata = {
110 .gpio = UBNT_RS_GPIO_SW4,
115 static struct gpio_button ubnt_m_gpio_buttons[] __initdata = {
121 .gpio = UBNT_M_GPIO_BTN_RESET,
126 static void __init ubnt_generic_setup(void)
128 ar71xx_add_device_m25p80(NULL);
130 ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
131 ARRAY_SIZE(ubnt_gpio_buttons),
137 #define UBNT_RS_WAN_PHYMASK (1 << 20)
138 #define UBNT_RS_LAN_PHYMASK ((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19))
140 #define UBNT_RSPRO_WAN_PHYMASK (1 << 4)
141 #define UBNT_RSPRO_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))
143 static void __init ubnt_rs_setup(void)
145 ubnt_generic_setup();
147 ar71xx_add_device_mdio(~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
149 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
150 ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
152 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
153 ar71xx_eth1_data.phy_mask = UBNT_RS_LAN_PHYMASK;
155 ar71xx_eth1_data.speed = SPEED_100;
156 ar71xx_eth1_data.duplex = DUPLEX_FULL;
158 ar71xx_add_device_eth(0);
159 ar71xx_add_device_eth(1);
161 ar71xx_add_device_usb();
163 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
167 MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "Ubiquiti RouterStation", ubnt_rs_setup);
169 static void __init ubnt_rspro_setup(void)
171 ubnt_generic_setup();
173 ar71xx_add_device_mdio(~(UBNT_RSPRO_WAN_PHYMASK | UBNT_RSPRO_LAN_PHYMASK));
175 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
176 ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
178 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
179 ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
181 ar71xx_eth1_data.speed = SPEED_1000;
182 ar71xx_eth1_data.duplex = DUPLEX_FULL;
184 ar71xx_add_device_eth(0);
185 ar71xx_add_device_eth(1);
187 ar71xx_add_device_usb();
189 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
193 MIPS_MACHINE(AR71XX_MACH_UBNT_RSPRO, "Ubiquiti RouterStation Pro",
196 static void __init ubnt_lsx_setup(void)
198 ubnt_generic_setup();
201 MIPS_MACHINE(AR71XX_MACH_UBNT_LSX, "Ubiquiti LSX", ubnt_lsx_setup);
203 #define UBNT_LSSR71_PHY_MASK (1 << 1)
205 static void __init ubnt_lssr71_setup(void)
207 ubnt_generic_setup();
209 ar71xx_add_device_mdio(~UBNT_LSSR71_PHY_MASK);
211 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
212 ar71xx_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
214 ar71xx_add_device_eth(0);
216 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
217 ubnt_ls_sr71_leds_gpio);
220 MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "Ubiquiti LS-SR71", ubnt_lssr71_setup);
222 static void __init ubnt_m_setup(void)
224 u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
225 u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
227 ar71xx_set_mac_base(mac);
229 ar71xx_add_device_m25p80(NULL);
231 ar71xx_add_device_mdio(~0);
233 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
234 ar71xx_eth0_data.phy_mask = 0;
235 ar71xx_eth0_data.speed = SPEED_100;
236 ar71xx_eth0_data.duplex = DUPLEX_FULL;
237 ar71xx_eth0_data.fifo_cfg1 = 0x0010ffff;
238 ar71xx_eth0_data.fifo_cfg2 = 0x015500aa;
239 ar71xx_eth0_data.fifo_cfg3 = 0x01f00140;
241 ar71xx_add_device_eth(0);
243 ap91_pci_init(ee, NULL);
245 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio),
248 ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
249 ARRAY_SIZE(ubnt_m_gpio_buttons),
250 ubnt_m_gpio_buttons);
253 static void __init ubnt_rocket_m_setup(void)
256 ar71xx_add_device_usb();
259 MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M, "Ubiquiti Bullet M", ubnt_m_setup);
260 MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M, "Ubiquiti Rocket M", ubnt_rocket_m_setup);
262 /* TODO detect the second ethernet port and use one
263 init function for all Ubiquiti MIMO series products */
264 static void __init ubnt_nano_m_setup(void)
268 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
269 ar71xx_eth1_data.phy_mask = 0;
270 ar71xx_eth1_data.speed = SPEED_1000;
271 ar71xx_eth1_data.duplex = DUPLEX_FULL;
272 ar71xx_eth1_data.fifo_cfg1 = 0x0010ffff;
273 ar71xx_eth1_data.fifo_cfg2 = 0x015500aa;
274 ar71xx_eth1_data.fifo_cfg3 = 0x01f00140;
276 ar71xx_add_device_eth(1);
279 MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "Ubiquiti Nanostation M", ubnt_nano_m_setup);