ar71xx: add an id argument to ar71xx_add_device_mdio
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tl-wr703n.c
1 /*
2  *  TP-LINK TL-WR703N board support
3  *
4  *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
5  *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
6  *
7  *  This program is free software; you can redistribute it and/or modify it
8  *  under the terms of the GNU General Public License version 2 as published
9  *  by the Free Software Foundation.
10  */
11
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/partitions.h>
14 #include <linux/spi/flash.h>
15 #include <linux/gpio.h>
16
17 #include <asm/mach-ar71xx/ar71xx.h>
18
19 #include "machtype.h"
20 #include "devices.h"
21 #include "dev-ar9xxx-wmac.h"
22 #include "dev-gpio-buttons.h"
23 #include "dev-leds-gpio.h"
24 #include "dev-m25p80.h"
25 #include "dev-usb.h"
26
27 #define TL_WR703N_GPIO_LED_SYSTEM       27
28 #define TL_WR703N_GPIO_BTN_RESET        11
29
30 #define TL_WR703N_GPIO_USB_POWER        8
31
32 #define TL_WR703N_KEYS_POLL_INTERVAL    20      /* msecs */
33 #define TL_WR703N_KEYS_DEBOUNCE_INTERVAL        (3 * TL_WR703N_KEYS_POLL_INTERVAL)
34
35 #ifdef CONFIG_MTD_PARTITIONS
36 static struct mtd_partition tl_wr703n_parts[] = {
37         {
38                 .name           = "u-boot",
39                 .offset         = 0,
40                 .size           = 0x020000,
41                 .mask_flags     = MTD_WRITEABLE,
42         }, {
43                 .name           = "kernel",
44                 .offset         = 0x020000,
45                 .size           = 0x100000,
46         }, {
47                 .name           = "rootfs",
48                 .offset         = 0x120000,
49                 .size           = 0x2d0000,
50         }, {
51                 .name           = "art",
52                 .offset         = 0x3f0000,
53                 .size           = 0x010000,
54                 .mask_flags     = MTD_WRITEABLE,
55         }, {
56                 .name           = "firmware",
57                 .offset         = 0x020000,
58                 .size           = 0x3d0000,
59         }
60 };
61 #define tl_wr703n_nr_parts      ARRAY_SIZE(tl_wr703n_parts)
62 #else
63 #define tl_wr703n_parts         NULL
64 #define tl_wr703n_nr_parts      0
65 #endif /* CONFIG_MTD_PARTITIONS */
66
67 static struct flash_platform_data tl_wr703n_flash_data = {
68         .parts          = tl_wr703n_parts,
69         .nr_parts       = tl_wr703n_nr_parts,
70 };
71
72 static struct gpio_led tl_wr703n_leds_gpio[] __initdata = {
73         {
74                 .name           = "tp-link:blue:system",
75                 .gpio           = TL_WR703N_GPIO_LED_SYSTEM,
76                 .active_low     = 1,
77         },
78 };
79
80 static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = {
81         {
82                 .desc           = "reset",
83                 .type           = EV_KEY,
84                 .code           = KEY_RESTART,
85                 .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL,
86                 .gpio           = TL_WR703N_GPIO_BTN_RESET,
87                 .active_low     = 1,
88         }
89 };
90
91 static void __init tl_wr703n_setup(void)
92 {
93         u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
94         u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
95
96         ar71xx_add_device_m25p80(&tl_wr703n_flash_data);
97         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio),
98                                         tl_wr703n_leds_gpio);
99         ar71xx_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL,
100                                          ARRAY_SIZE(tl_wr703n_gpio_keys),
101                                          tl_wr703n_gpio_keys);
102
103         gpio_request(TL_WR703N_GPIO_USB_POWER, "USB power");
104         gpio_direction_output(TL_WR703N_GPIO_USB_POWER, 1);
105         ar71xx_add_device_usb();
106
107         ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
108
109         ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
110         ar71xx_eth0_data.speed = SPEED_100;
111         ar71xx_eth0_data.duplex = DUPLEX_FULL;
112         ar71xx_eth0_data.phy_mask = BIT(4);
113
114         ar71xx_add_device_mdio(0, 0x0);
115         ar71xx_add_device_eth(0);
116
117         ar9xxx_add_device_wmac(ee, mac);
118 }
119
120 MIPS_MACHINE(AR71XX_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1",
121              tl_wr703n_setup);