ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-db120.c
1 /*
2  *  Atheros DB120 board (WASP SoC) support
3  *
4  *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
5  *
6  *  This program is free software; you can redistribute it and/or modify it
7  *  under the terms of the GNU General Public License version 2 as published
8  *  by the Free Software Foundation.
9  */
10
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/partitions.h>
13
14 #include <asm/mach-ar71xx/ar71xx.h>
15
16 #include "machtype.h"
17 #include "devices.h"
18 #include "dev-m25p80.h"
19 #include "dev-gpio-buttons.h"
20 #include "dev-leds-gpio.h"
21 #include "dev-usb.h"
22 #include "dev-ar9xxx-wmac.h"
23 #include "dev-db120-pci.h"
24
25 #define DB120_GPIO_LED_USB      11
26 #define DB120_GPIO_LED_WLAN_5G  12
27 #define DB120_GPIO_LED_WLAN_2G  13
28 #define DB120_GPIO_LED_STATUS   14
29 #define DB120_GPIO_LED_WPS      15
30
31 #define DB120_GPIO_BTN_SW1      16
32
33 #define DB120_CALDATA_OFFSET    0x1000
34 #define DB120_WMAC_MAC_OFFSET   0x1002
35
36 #define DB120_KEYS_POLL_INTERVAL        20      /* msecs */
37 #define DB120_KEYS_DEBOUNCE_INTERVAL    (3 * DB120_KEYS_POLL_INTERVAL)
38
39 #ifdef CONFIG_MTD_PARTITIONS
40 static struct mtd_partition db120_partitions[] = {
41         {
42                 .name           = "u-boot",
43                 .offset         = 0,
44                 .size           = 0x040000,
45                 .mask_flags     = MTD_WRITEABLE,
46         }, {
47                 .name           = "u-boot-env",
48                 .offset         = 0x040000,
49                 .size           = 0x010000,
50         }, {
51                 .name           = "rootfs",
52                 .offset         = 0x050000,
53                 .size           = 0x630000,
54         }, {
55                 .name           = "uImage",
56                 .offset         = 0x680000,
57                 .size           = 0x160000,
58         }, {
59                 .name           = "NVRAM",
60                 .offset         = 0x7E0000,
61                 .size           = 0x010000,
62         }, {
63                 .name           = "ART",
64                 .offset         = 0x7F0000,
65                 .size           = 0x010000,
66                 .mask_flags     = MTD_WRITEABLE,
67         }
68 };
69 #endif /* CONFIG_MTD_PARTITIONS */
70
71 static struct flash_platform_data db120_flash_data = {
72 #ifdef CONFIG_MTD_PARTITIONS
73         .parts          = db120_partitions,
74         .nr_parts       = ARRAY_SIZE(db120_partitions),
75 #endif
76 };
77
78 static struct gpio_led db120_leds_gpio[] __initdata = {
79         {
80                 .name           = "db120:green:status",
81                 .gpio           = DB120_GPIO_LED_STATUS,
82                 .active_low     = 1,
83         }, {
84                 .name           = "db120:green:wps",
85                 .gpio           = DB120_GPIO_LED_WPS,
86                 .active_low     = 1,
87         }, {
88                 .name           = "db120:green:wlan-5g",
89                 .gpio           = DB120_GPIO_LED_WLAN_5G,
90                 .active_low     = 1,
91         }, {
92                 .name           = "db120:green:wlan-2g",
93                 .gpio           = DB120_GPIO_LED_WLAN_2G,
94                 .active_low     = 1,
95         }, {
96                 .name           = "db120:green:usb",
97                 .gpio           = DB120_GPIO_LED_USB,
98                 .active_low     = 1,
99         }
100 };
101
102 static struct gpio_keys_button db120_gpio_keys[] __initdata = {
103         {
104                 .desc           = "sw1",
105                 .type           = EV_KEY,
106                 .code           = BTN_0,
107                 .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
108                 .gpio           = DB120_GPIO_BTN_SW1,
109                 .active_low     = 1,
110         }
111 };
112
113 static void __init db120_setup(void)
114 {
115         u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
116
117         ar71xx_add_device_usb();
118
119         ar71xx_add_device_m25p80(&db120_flash_data);
120
121         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
122                                         db120_leds_gpio);
123
124         ar71xx_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
125                                          ARRAY_SIZE(db120_gpio_keys),
126                                          db120_gpio_keys);
127
128         ar9xxx_add_device_wmac(art + DB120_CALDATA_OFFSET,
129                                 art + DB120_WMAC_MAC_OFFSET);
130
131         db120_pci_init();
132 }
133
134 MIPS_MACHINE(AR71XX_MACH_DB120, "DB120", "Atheros DB120", db120_setup);